information
on how.
I would appreciate if someone could point me in the right direction.
Thank you
Leslie Jensen
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hi
I'm using KDE and my problem is that when I want to finish and shutdown
my PC, I use the little red button log out and there is only the
choice of ending the current session and it only takes me back to the
log in dialog. I would like to have the reboot and shutdown options as well.
Any
Hello
I upgraded Gimp to version 2.6.1 and now I do not have the require (for
scanning) meny choice anymore.
Any ideas on how to get the function back.
I can scan using xscanimage but it takes more steps to get the scanned
image into Gimp.
/Leslie
Warren Block skrev:
On Thu, 16 Oct 2008, Leslie Jensen wrote:
I upgraded Gimp to version 2.6.1 and now I do not have the require
(for scanning) meny choice anymore.
Acquire, maybe?
Yes, sorry about that.
Any ideas on how to get the function back.
I can scan using xscanimage
I'm running 7.1-PRERELEASE. Yesterday I csup'ed and upgraded as I've
done several times in order to install 7.1-BETA2. Everything went as it
should, but my system still says 7.1-PRERELEASE. In my stable-supfile I
have *default release=cvs tag=RELENG_7.
Can anyone tell me where I can make sure
Jeremy Chadwick skrev:
On Fri, Oct 24, 2008 at 06:24:56AM +0200, Leslie Jensen wrote:
I'm running 7.1-PRERELEASE. Yesterday I csup'ed and upgraded as I've
done several times in order to install 7.1-BETA2. Everything went as it
should, but my system still says 7.1-PRERELEASE. In my stable
Jeremy Chadwick skrev:
On Fri, Oct 24, 2008 at 06:41:05AM +0200, Leslie Jensen wrote:
Jeremy Chadwick skrev:
On Fri, Oct 24, 2008 at 06:24:56AM +0200, Leslie Jensen wrote:
I'm running 7.1-PRERELEASE. Yesterday I csup'ed and upgraded as I've
done several times in order to install 7.1-BETA2
Masoom Shaikh skrev:
Hi folks,
y'day I csuped the src and built installed the kernel from RELENG_7
I was expecting FreeBSD-BETA2 in output of `uname -a`
it is still -PRERELEASE, is it by decision or I have to change something ?
I greped /usr/src for PRERELEASE but cud not locate it. I guess
Hi
How would you guys uninstall a meta-port?
I'm considering a move to kde4 but I want a clean install, so I want to
remove the kde3 meta-port first.
Thanks
/Leslie
___
freebsd-questions@freebsd.org mailing list
Jerry skrev:
On Tue, 02 Dec 2008 08:38:02 +0100
Leslie Jensen [EMAIL PROTECTED] wrote:
How would you guys uninstall a meta-port?
I'm considering a move to kde4 but I want a clean install, so I want
to remove the kde3 meta-port first.
Well, you might try navigating to the kde3 port /usr
Mel skrev:
On Tuesday 02 December 2008 08:38:02 Leslie Jensen wrote:
How would you guys uninstall a meta-port?
I'm considering a move to kde4 but I want a clean install, so I want to
remove the kde3 meta-port first.
cd /usr/ports/x11/kde3
for dep in `make -V RUN_DEPENDS`; do
origin
Leslie Jensen skrev:
Mel skrev:
On Tuesday 02 December 2008 08:38:02 Leslie Jensen wrote:
How would you guys uninstall a meta-port?
I'm considering a move to kde4 but I want a clean install, so I want to
remove the kde3 meta-port first.
cd /usr/ports/x11/kde3
for dep in `make -V
I have a Server with Squid, 7.0-RELEASE-p4 FreeBSD, squid-3.0.11, that
has been running fine for the last six months, at least.
It is shutdown every night at 7 PM via cron.
Now suddenly the machine is rebooting instead, and I've made no changes
whatsoever. I'm wondering if this is a symptom
I'm considering a Squid box serving two different networks, both with
their own Internet access.
Access from network 1 to default router on network 1
and
Access from network 2 to default router on network 2
How do one set default router per NIC?
Thanks
/Leslie
As you can read in the subject I'm not succesful in booting on the
installation DVD. Default choice hangs, selecting 2 for disableing acpi
does not help
I've tried with a lot of BIOS features disabled. Unfortunately there's
no change, the machine stops at the same place every time. After
Harold Hartley skrev:
I am wondering if the freebsd team has ever thought of making freebsd to
install on windows like ubuntu does.
I'm just a person that can't afford more than one computer cause I live
in a nursing home and I would like to be able to use one computer to
choose what I
michael skrev:
Chris Maness wrote:
Is there now a cleaner way to install flash on FreeBSD, or do we still
have to wade through this:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=51075+0+archive/2008/freebsd-emulation/20081102.freebsd-emulation
I updated Perl and it went ok. But when I want to rebuild the ports
depending on perl I get the error below.
portmaster -o lang/perl5.10 lang/perl5.8
=== Cleaning for perl-5.10.0_1
=== Updating package dependency entry for each dependent port
=== Delete perl-5.8.9.tar.bz2? [n] y
===
:portmaster -r perl\*
=== No ORIGIN in /var/db/pkg/perl-5.10.0_1/+CONTENTS:@comment
ORIGIN:lang/per
l5.10 /var/db/pkg/perltidy-20071205/+CONTENTS:@comment
ORIGIN:devel/perltidy/+CO
NTENTS
=== Aborting update
I've been looking in the +CONTENTS files for perl and perltidy, but it's
not
Hello list.
When one updates perl, one should rebuild all ports dependend on perl
according to the UPDATING file.
I'm just wondering, isn't the script perl-after-upgrade supposed to do
the work needed, so that one can save the time of upgrading the ports?
Thanks.
/Leslie
I used to use csup and in my /root/ports-supfile I changed the default
host line to a server near me.
*default host=cvsup.se.FreeBSD.org
Now I've been using portsnap for a while and when installing a new
system I got to question if portsnap look in this file for an update
server or does
Manolis Kiagias skrev:
Leslie Jensen wrote:
I used to use csup and in my /root/ports-supfile I changed the default
host line to a server near me.
*default host=cvsup.se.FreeBSD.org
Now I've been using portsnap for a while and when installing a new
system I got to question if portsnap look
I'm wondering how I should handle my laptops network interfaces. I'm
often forced to wait for bsdstats, ntpd and sshd to time out if I'm not
connected. Even if I am connected on one interface the default gateway
is assigned to the interface that is not connected.
I've found some information
Sniper skrev:
I have strange problem with portupgrade.
--$ sudo portupgrade -a
** Port directory not found: x11/libxfce4mcs
** Port directory not found: x11-themes/xfce4-icon-theme
** Port directory not found: sysutils/xfce4-mcs-manager
** There are errors in a meta info for
Daniel Underwood skrev:
I'm having trouble getting wireless to work on my FreeBSD laptop.
I'm running FreeBSD 7.1-RELEASE. My wireless device is Intel
PRO/Wireless 2200BG.
After typing ifconfig iwi0, I get the following:
iwi0: flags=8802BROADCAST,SIMPLEX,MULTICAST metric 0 mtu 1500
I'm at the point where sane-find-scanner detects my scanner but
scanimage cannot find it.
I know I must use the sane-epkowa backend.
I've edited the /usr/local/etc/sane.d/epkowa.conf but I think I need to
make sane aware of the epkowa backend.
The man page for sane-epkowa is not very
On 2009-12-30 19:58, Roland Smith wrote:
On Wed, Dec 30, 2009 at 06:48:56PM +0100, Leslie Jensen wrote:
I'm at the point where sane-find-scanner detects my scanner but
scanimage cannot find it.
I know I must use the sane-epkowa backend.
I've edited the /usr/local/etc/sane.d/epkowa.conf but I
The uscanner device has been deprecated in favor of the libusb API that is in
the base system in 8.x. (Even the /dev/ugen devices are now just links to
nodes in /dev/usb/.)
If you have the configuration right (both dll.conf and epkowa.conf), check the
device permissions. I've got the
On the console I see a lot of warnings like this:
Cannot open /home/lib/amd64/libjavaplugin_nscp.so
I can find libjavaplugin_nscp.so in two places:
/usr/local/diablo-jdk1.6.0/jre/lib/amd64/libjavaplugin_nscp.so
/usr/local/jdk1.6.0/jre/lib/amd64/libjavaplugin_nscp.so
To get rid of the
On 2009-12-31 12:04, Roland Smith wrote:
On Thu, Dec 31, 2009 at 12:06:20AM +0100, Leslie Jensen wrote:
my dll.conf:
Personally, I would only leave in the backends that I actually use.
What do you mean?
epkowa.conf
usb 0x04b8 0x0130
That should be OK.
I've created /etc
On 2009-12-31 13:09, Roland Smith wrote:
On Thu, Dec 31, 2009 at 12:25:53PM +0100, Leslie Jensen wrote:
On 2009-12-31 12:04, Roland Smith wrote:
On Thu, Dec 31, 2009 at 12:06:20AM +0100, Leslie Jensen wrote:
my dll.conf:
Personally, I would only leave in the backends that I actually use
I did a
sane-find-scanner -v -v
I've pasted what's relevant for the scanner.
This is sane-find-scanner from sane-backends 1.0.20
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from
On 2009-12-31 17:05, Roland Smith wrote:
On Thu, Dec 31, 2009 at 04:27:12PM +0100, Leslie Jensen wrote:
I did a
sane-find-scanner -v -v
device descriptor of 0x04b8/0x0130 at /dev/usb:/dev/ugen7.2 (EPSON
EPSON Scanner)
According to
[http://www.sane-project.org/lists/sane-backends
On 2010-01-03 23:27, Warren Block wrote:
Finishing a complete new install of 8-stable on a Thinkpad T42. This
model came with the Intel PRO/wireless 2100.
Despite being 802.11b only, the 2100 with the latest firmware does
WPA2 on Windows XP.
So far, it has almost but not quite been able to
01/21/10 17:28, Frank Bonnet skrev:
Hello
The question is in the subject :-)
Thanks a lot
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
When I install Thunderbird3
thunderbird-3.0.1
thunderbird-dictionaries-20060220_4
thunderbird3-i18n-3.0.1
It does not adapt to what I have in /etc/make.conf
# Firefox-i18n
FIREFOX_I18N=sv-SE
# Thunderbird-i18n
THUNDERBIRD_I18N=sv-SE
Firefox instals xpi-quick-locale-switcher-1.7 set to
On 01/24/10 19:31, Bernt Hansson wrote:
You need thunderbird3-i18n not thunderbird-i18n.
Yes, of course. Unfortunately there's no change, after deinstalling and
rebuilding it's the same behaviour.
Thanks.
___
freebsd-questions@freebsd.org
01/25/10 09:11, Leslie Jensen skrev:
On 01/24/10 19:31, Bernt Hansson wrote:
You need thunderbird3-i18n not thunderbird-i18n.
Yes, of course. Unfortunately there's no change, after deinstalling and
rebuilding it's the same behaviour.
Thanks.
Found it! The Swedish language pack
2010-01-27 17:28, dhaneshk k skrev:
Fellow FreeBSDians,
I am trying to configure my laptop for wireless connectivity to a
broadband connection.
these are the steps I followed, I don't know what I made wrong, please help to
fix the issue..
1 ) To /boot/loader.conf
I'm trying to mount a floppy image following the instructions on:
http://www.bsdguides.org/guides/freebsd/beginners/mdconfig_mount_images
To mount a floppy image, create a virtual device, /dev/md0, for the
floppy image.
# mdconfig -a -t vnode -f
2010-01-31 09:27, Leslie Jensen skrev:
I'm trying to mount a floppy image following the instructions on:
http://www.bsdguides.org/guides/freebsd/beginners/mdconfig_mount_images
To mount a floppy image, create a virtual device, /dev/md0, for the
floppy
On the page
http://www.se.freebsd.org/doc/en_US.ISO8859-1/books/handbook/using-localization.html
Syntax is shown as:
language_name:accounts_title:\
:charset=MIME_charset:\
:lang=locale_name:\
:tc=default:
If I look in the file on a newly installed 8.0-RELEASE it shows:
2010-02-06 11:58, Ion-Mihai Tetcu skrev:
On Sat, 6 Feb 2010 12:49:52 +0200
Ion-Mihai Tetcuite...@freebsd.org wrote:
On Sat, 06 Feb 2010 11:13:08 +0100
O. Hartmannohart...@mail.zedat.fu-berlin.de wrote:
Since yesterday's portsnape and attempt updating my ports, ALL
FreeBSD boxes (running
2010-02-07 15:37, Ion-Mihai Tetcu skrev:
On Sun, 07 Feb 2010 13:36:55 +0100
Leslie Jensenles...@eskk.nu wrote:
[ .. ]
For the moment the workaround, when you get to this, is to:
mv /usr/local/lib/libqt-mt.so /usr/local/lib/libqt-mt.so.old \
cd /usr/ports/x11-toolkits/qt33/ make \
2010-02-08 08:55, Ion-Mihai Tetcu skrev:
On Mon, 08 Feb 2010 08:44:53 +0100
Leslie Jensenles...@eskk.nu wrote:
2010-02-07 15:37, Ion-Mihai Tetcu skrev:
On Sun, 07 Feb 2010 13:36:55 +0100
Leslie Jensenles...@eskk.nu wrote:
[ .. ]
For the moment the workaround, when you get to
2010-02-16 19:35, Jamie Griffin skrev:
I have a really simple question about updating my system. Does
/usr/src/UPDATING say when I need to update the kernel and world (obviously
after updating the sources using csup/cvsup). I've been assuming it does but
i'm not sure i'm following it
Angelin Lalev skrev 2010-02-23 13:20:
Well, Windows 7 isn't playing nicely with FreeBSD (and some other OS systems).
I have my first primary partition (MBR scheme) installed with Windows 7
and I want to have FreeBSD as second primary partition. Eventually, I
want to have
Ubuntu on my first and
I often experience long shutdown times on my laptop due to the syncing
of disks. Usually I just leave it and the pc will shutdown eventually.
Today I saw a new message that I think is related.
ACPI error cannot release mutex [ECMX] synclevel mismatch:
mutex 1 current 0 20090521 emutex-529
.
.
2010-02-25 21:45, Marwan Sultan skrev:
Hello List,
well im sure its a small mistake here or there.
I know driver works with PCBS perfectly, but i cannot manualy configure it.
something missing..
its iwn wireless driver, here are the settings :
/boot/loader.conf
This address
http://searchportal.information.com/?o_id=94081domainname=lists.freebsd.org
I'm trying to subscribe to freebsd-emulation but I end up at the above.
I've tried via the handbook and direct url. Same result. Is this a new
behaviour?
/Leslie
On 2010-02-26 12:41, Glen Barber wrote:
Hi,
Leslie Jensen wrote:
This address
http://searchportal.information.com/?o_id=94081domainname=lists.freebsd.org
I'm trying to subscribe to freebsd-emulation but I end up at the above.
I've tried via the handbook and direct url. Same result
On 2010-02-26 12:41, Glen Barber wrote:
Hi,
Leslie Jensen wrote:
This address
http://searchportal.information.com/?o_id=94081domainname=lists.freebsd.org
I'm trying to subscribe to freebsd-emulation but I end up at the above.
I've tried via the handbook and direct url. Same result
Hi all,
I have just upgrade my FreeBSD server from 7 to 8. Everything seems to be
working OK, except the Atheros-based wireless network card, which I had
configured as an access point and which worked fine under 7 for several
years.
The command:
# ifconfig ath0 up
works fine, but
On a dualboot system I've made some space available that I want to make
a freebsd slice of.
Following the instructions described here:
http://forums.freebsd.org/showthread.php?t=2726
When using sysinstall label I get this when I try to write.
Error mounting /dev/ad4s4d on /data : File or
On 2010-03-01 17:49, Polytropon wrote:
On Mon, 01 Mar 2010 10:25:48 +0100, Leslie Jensenles...@eskk.nu wrote:
On a dualboot system I've made some space available that I want to make
a freebsd slice of.
[...]
Any suggestions on how to solve this?
I would suggest to use sysinstall oder sade
At this screen:
--
FreeBSD Disklabel Editor
Disk: ad4 Partition name: ad4s4 Free: 0 blocks (0MB)
Disk: ad4 Partition name: ad4s3 Free: 0 blocks (0MB)
Part Mount Size Newfs Part Mount Size Newfs
- - -
On 2010-03-04 17:06, Tim Daneliuk wrote:
Is there a recommended procedure I can read somewhere on how to upgrade an
entire production system from Perl 5.8 to 5.10 (or whatever is current)
cleanly?
/usr/ports/UPDATING ;-)
___
On 2010-03-05 13:54, John wrote:
My nightly security logs have thousands upon thousands of ssh probes
in them. One day, over 6500. This is enough that I can actually
feel it in my network performance. Other than changing ssh to
a non-standard port - is there a way to deal with these? Every
I'm curious if it's possible to get a
pinnacle nanostick 73e
to work with Freebsd.
When inserted /var/log/messages repports the following
root: Unknown USB device: vendor 0x2304 product 0x0237 bus uhub7
kernel: ugen7.2: Pinnacle at usbus7
/Leslie
On 2010-03-10 11:05, Nikos Vassiliadis wrote:
Hi,
I am interested in buying a laptop from the
Dell Inspiron 15 series. Most of them are having
a wifi card branded as 'Dell Wireless 1397'.
Is there a driver for this?
I would prefer a native driver, but success
stories using it with NDIS or
On 2010-03-10 12:31, Nikos Vassiliadis wrote:
On 3/10/2010 12:41 PM, Leslie Jensen wrote:
I bought a Dell Latitude 6500 two years ago. The Dell Wireless was not
supported then by FreeBSD. I got an Intel card from Dell instead and the
iwn driver works well.
http://forums.freebsd.org
I'm trying to install FreeBSD 8-RELEASE on a machine with an Abit
aw8-max MB. This MB has a built in SiI 3132 RAID controller. I also have
an addon card with a SiI 3124 RAID controller.
The problem is that I can see the 2 disks and the RAID1 set that I want
to use for the system if I
On 2010-03-10 23:12, Steve Polyack wrote:
On 03/10/10 15:56, Leslie Jensen wrote:
I'm trying to install FreeBSD 8-RELEASE on a machine with an Abit
aw8-max MB. This MB has a built in SiI 3132 RAID controller. I also
have an addon card with a SiI 3124 RAID controller.
The problem is that I
The solution for me was to create a raidz which gave me the same amount
of space. Now I wonder, should I enable compression? Will it affect
performance?
Later I want to share this pool with SAMBA. Will SAMBA see the pool as a
filesystem?
Thanks
/Leslie
I need to have ftp access to a machine. I've found pure-ftpd but it was
last updated 2007/02/03. I'm aware that it can function very well
despite that, but I would like the lists suggestion on what to choose to
make ftp access as secure as possible. It will be mainly windows clients
krad skrev 2010-03-12 11:07:
enable sftp in ssh and chroot all the users and make the sftp only accounts
I wrote this guide for work a year or so ago. It was for solaris but it was
using openssh so should work fine on bsd
1. Dont bother with sun ssh it wont work. Opensolaris and later
Антон Клесс skrev 2010-03-12 11:57:
I have the following line in my root cron:
5 * * * * /usr/sbin/ntpdate ru.pool.ntp.org /dev/null
That must hourly adjust system time via NTP.
But I discover that it works from time to time: some days just once, some
days 5-6 times a day I receive e-mail
I have set upp aggregation of my wlan and and wired NIC following the
instructions in the handbook.
http://www.freebsd.org/doc/handbook/network-aggregation.html
I forgot to add the if_lagg_load=YES in /boot/loader.conf. When I
rebooted I got a kernel panic.
Should this be considerd normal
On 2010-03-17 09:36, Nikos Vassiliadis wrote:
Leslie Jensen wrote:
I have set upp aggregation of my wlan and and wired NIC following the
instructions in the handbook.
http://www.freebsd.org/doc/handbook/network-aggregation.html
I forgot to add the if_lagg_load=YES in /boot/loader.conf
On 2010-03-21 22:19, Modulok wrote:
I have a wireless network card. But I can't configure it. I read in
UPDATING that this had to do with some split up of the wireless
drivers into software/hardware interfaces? Something to do with me
having to clone the interface before I can configure it?
You can read this tread:
http://www.mail-archive.com/freebsd-questions@freebsd.org/msg229158.html
/Leslie
Hello,
Sorry if this has been asked before, but can some point me to where I
can find info on installing FreeBSD-8 to a windows-7 pre-installed
machine (single disk) in a
so here is one trick if you got guts to try :). I recently got saved
with this trick
you have Win7 pre-installed, now free up some space and let FreeBSD
install, select the option do not touch mbr. Next boot you will find
Win7 gone. Boot from Win7 CD and let it install at same location where
On 2010-04-13 01:44, Adam Vande More wrote:
On Mon, Apr 12, 2010 at 6:30 PM, cassetti77adriano.d...@gmail.com wrote:
Excuse me. I have a sony vaio vgn-nw21mf too. I read your conversation, but
i have not undertand what i do to configure my intel wifi 5100 agn. I don't
know nothing about
It's now more than 10 days. Are ports stable now?
Thanks
/Leslie
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Garrett Cooper skrev 2010-04-19 09:28:
On Mon, Apr 19, 2010 at 12:25 AM, Leslie Jensenles...@eskk.nu wrote:
It's now more than 10 days. Are ports stable now?
http://ragingred.files.wordpress.com/2008/10/simpsons_are-we-there-yet.jpg
In short, sorry... nope (there's still some ways to go
On 2010-04-20 15:41, pe...@vfemail.net wrote:
I can change named_enable=YES to named_enable=NO in the /etc/rc.conf file.
Should I delete the following line from the /etc/rc.conf file that says:
named_flags=-u bind -g bind
or is it fine to leave it?
---
At 08:43 AM 4/20/2010,
On 2010-04-24 12:56, Jerry wrote:
I was wondering if anyone has gotten a WUSB600N Dual-Band Wireless-N
Network Adapter to work on FreeBSD-8? I cannot find a driver for it.
I have an older Linksys device. It uses the rum driver. Try man rum.
And of course
Hello list.
I'm installing squid on a new 8.2-RELEASE machine.
I've done it it before with squid 2.x and I have notes to follow.
A few questions have turned up.
I have /usr/local/squid as default directory and has made a separate
mount point.
When it comes to the cache and the logs
On 2011-03-09 18:02, RW wrote:
On Wed, 09 Mar 2011 16:27:27 +0100
Leslie Jensenles...@eskk.nu wrote:
Hello list.
I'm installing squid on a new 8.2-RELEASE machine.
...
When Googling this problem I see both the use of /var/squid and
/usr/local/squid.
...
I find what I consider conflicting
On 2011-03-09 17:06, Kevin Wilcox wrote:
On Wed, Mar 9, 2011 at 10:27, Leslie Jensenles...@eskk.nu wrote:
I'm installing squid on a new 8.2-RELEASE machine.
Me too.
I have /usr/local/squid as default directory and has made a separate mount
point.
Same here. As a general rule I like to
My system still is shows #0
8.2-RELEASE #0
Following the latest FreeBSD Security Advisory FreeBSD-SA-11:02.bind
I did
# freebsd-update fetch
# freebsd-update install
And a reboot, but my system doesn't indicate the update!
Any suggestions ?
Thanks
/Leslie
Anders Troback skrev:
On Wed, 6 May 2009 14:08:27 +0200
Matthias Apitz g...@unixarea.de wrote:
El día Wednesday, May 06, 2009 a las 01:26:50PM +0300, Manolis
Kiagias escribió:
Sure, You can even reduce Vista's partition from Control Panel -
Administrative Tools - Computer Management - Disk
Daniel Underwood skrev:
There appear to be several clients capable of working with DynDNS.com
services here:
http://www.freebsd.org/ports/dns.html
E.g., dns/inadyn, dns/ipcheck
Can anyone make recommendations? My goal in using DynDNS is to allow
remote SSH logins to a machine behind a
Is anyone running FreeBSD on a Lenovo s9e? I'm in the market for a
netbook, and have seen these fairly cheap but can't find anything on
Google about anyone trying FreeBSD on one.
I'd rather not run Linux, so can anyone share experiences of the Lenovo,
or suggest a better supported netbook?
I've just updated my 7.1-RELEASE to 7.2-RELEASE using freebsd-update.
Everything went ok but I've got a problem when I do
pkgdb -F
/libexec/ld-elf.so.1: /usr/lib/libcrypt.so.4: unsupported file layout
I might have goofed before I updated when moving files around to make
space, so I need
Tim Judd skrev:
On Thu, May 21, 2009 at 10:20 AM, Frederique Rijsdijk
frederi...@isafeelin.org wrote:
Leslie Jensen wrote:
I've just updated my 7.1-RELEASE to 7.2-RELEASE using freebsd-update.
Everything went ok but I've got a problem when I do
pkgdb -F
/libexec/ld-elf.so.1: /usr/lib
When I try to startx my screen goes black for a while and then it
returns to the prompt.
At the screen I see this
The XKEYBOARD keymap compiler (xkbcomp) reports:
Warning: Type ONE_LEVEL has 1 levels, but RALT has 2 symbols
Ignoring extra symbols
Errors from
Peter Ulrich Kruppa skrev:
On Fri, 29 May 2009, Leslie Jensen wrote:
When I try to startx my screen goes black for a while and then it
returns to the prompt.
At the screen I see this
The XKEYBOARD keymap compiler (xkbcomp) reports:
Warning: Type ONE_LEVEL has 1 levels, but RALT
Wojciech Puchar skrev:
Errors from xkbcomp are not fatal to the X server
(EE) config/hal: NewInputDeviceRequest failed
(EE) config/hal: NewInputDeviceRequest failed
Protocol not supported by server
Do you have
dbus_enable=YES
hald_enable=YES
in your /etc/rc.conf ?
Yes I have
If
Wojciech Puchar skrev:
Produces the same result :-(
wouldn't it be better to pkg_delete xserver, make config, turn off
hal dependency and then install. Probably it will work fine then.
Sounds lika a good idea. I'll try it and repport back.
/Leslie
of course turn off hald, and run
Glen Barber skrev:
Leslie,
On Fri, May 29, 2009 at 3:06 PM, Leslie Jensen les...@eskk.nu wrote:
of course turn off hald, and run moused.
Unfortunately that did not fix the problem :-(
What do I test next?
Could you paste the output of:
cd /usr/ports/x11/xorg; make missing
There's
I can't get gcc43 to compile. I've deinstalled and reinstalled all its
dependencies but it still fails.
I'm on a 7.2-RELEASE system with all ports installed from a clean install.
The problem turned up when an update for fftw3 became available.
Apparently gcc43 is a new dependency for
David Kelly wrote:
On Mon, Jun 01, 2009 at 08:06:30PM +0200, Leslie Jensen wrote:
I can't get gcc43 to compile. I've deinstalled and reinstalled all its
dependencies but it still fails.
I'm on a 7.2-RELEASE system with all ports installed from a clean install.
The problem turned up when
Leslie Jensen wrote:
David Kelly wrote:
On Mon, Jun 01, 2009 at 08:06:30PM +0200, Leslie Jensen wrote:
I can't get gcc43 to compile. I've deinstalled and reinstalled all
its dependencies but it still fails.
I'm on a 7.2-RELEASE system with all ports installed from a clean
install
David Kelly wrote:
On Mon, Jun 01, 2009 at 08:06:30PM +0200, Leslie Jensen wrote:
I can't get gcc43 to compile. I've deinstalled and reinstalled all its
dependencies but it still fails.
Including perl? What version of perl do you have installed? I know it
builds with 5.8.9.
I have perl
/
I also have this in my /boot/loader.conf but it makes no difference.
kern.maxdsiz=734003200
Try with this?
kern.dfldsiz=1073741824
kern.maxdsiz=734003200
Cheers,
Matti
Unfortunately it did not make any difference. The build error persists.
/
Hello list
I've got a CD-R from a friend, (who runs windows) that I cannot mount on
my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The error I get is:
mount -t cd9660 /dev/acd0 /cdrom
mount_cd9660: /dev/acd0: Invalid
Roland Smith skrev:
On Tue, Jun 09, 2009 at 08:53:12PM +0200, Leslie Jensen wrote:
Hello list
I've got a CD-R from a friend, (who runs windows) that I cannot mount on
my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one
Warren Block skrev:
On Tue, 9 Jun 2009, Leslie Jensen wrote:
I've got a CD-R from a friend, (who runs windows) that I cannot mount
on my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The error I get is:
mount -t cd9660 /dev
Michael Powell skrev:
Leslie Jensen wrote:
[snip]
I tried that as well, same error unfortunately
mount -t udf /dev/acd0 /cdrom
mount_udf: /dev/acd0: Invalid argument
So is this a new MS filesystem that no one but Vista users can read? I'm
afraid we'll properly see more of these problems
1 - 100 of 312 matches
Mail list logo
