Hello all,
For whatever reason, I am not receiving my usual emails from this
mailing list to my Gmail account. I checked my account settings on
both ends and neither has changed and both look correct. Then, I
emailed [EMAIL PROTECTED] and have not heard a
reply back. Has any other
Hello everyone,
Allow me to preface my problem by saying that I am very ignorant when
it comes to networking. I do apologize if this is trivial. In any
event, I enabled the client ifpw firewall located in /etc/
rc.firewall. This appears to work well for my needs... except for one
Thank you for your very prompt reply. I tried your suggestion and it
didn't work. I do not know why. Is the location where I place this in
the client profile important?
I have also tried the person's actual IP address as well as the IP
address of the router (just in case it is not doing
Not just that, but it doesn't appear to be logging the events, even
after I added
net.inet.ip.fw.verbose=1
net.inet.ip.fw.verbose_limit=5
to /etc/sysctl.conf and
firewall_logging=YES
into /etc/rc.conf, i see no updates to /var/log/security after the
ssh attempt failed. What am I doing wrong
On Mar 15, 2006, at 1:11 AM, Ariff Abdullah wrote:
On Tue, 14 Mar 2006 21:56:24 -0500
Anthony M. Agelastos [EMAIL PROTECTED] wrote:
Hello everyone,
I am running a 6-STABLE machine that I updated several days ago.
When the aureal-kmod port is shut down, it tells me about a memory
leak
Hello everyone,
I am running a 6-STABLE machine that I updated several days ago. When
the aureal-kmod port is shut down, it tells me about a memory leak
(see below). Being paranoid, I removed aureal-kmod from my system,
reinstalled the OS, and then installed aureal-kmod and the problem
Hello all,
I know there has been a lot of activity on the mailing lists these
days regarding JDK and OOo. From what I could gather, most of it is
regarding keeping it working after the update of JDK14. In any event,
I was installing OOo-2.0 for the first time, and the build failed.
The
Hello,
Basically, I want to have bison and bison2 coexist peacefully on the
same machine. I installed math/opendx and it requires bison. Then, I
try to install editors/openoffice.org-2.0 and it requires bison2. I
get the message:
=== bison-2.1_1 conflicts with installed package(s):
Hello all,
I am the not-quite-proud owner of a Dell system that comes with an
aureal sound card inside of it. In any event, I found the aureal-kmod
kernel module and have gotten it to work on my machine (following
directions on http://www.matey.org/au88x0/). In the process of doing
this
Hello everyone,
Several hours ago, I tried to upgrade linux_base-8 on my 6.0-STABLE
box and it ran into many fetch problems, which can be seen below.
Prior to this upgrading, I upgraded xorg without problems and after
the failed troubleshooting, I had the machine install Firefox and it
On Jan 1, 2006, at 11:28 PM, Anthony M. Agelastos wrote:
Hello all,
In doing some routine items on my FreeBSD box, it started behaving
oddly. I rebooted and to my surprise, I started receiving many
messages displaying information regarding that /usr has issues. It
puts me directly
On Jan 2, 2006, at 10:31 AM, Anthony M. Agelastos wrote:
On Jan 1, 2006, at 11:28 PM, Anthony M. Agelastos wrote:
Hello all,
In doing some routine items on my FreeBSD box, it started behaving
oddly. I rebooted and to my surprise, I started receiving many
messages displaying information
Hello all,
In doing some routine items on my FreeBSD box, it started behaving
oddly. I rebooted and to my surprise, I started receiving many
messages displaying information regarding that /usr has issues. It
puts me directly into single user mode and tells me to run fsck
manually. When I
On Dec 12, 2005, at 10:02 AM, Lowell Gilbert wrote:
Anthony Agelastos [EMAIL PROTECTED] writes:
Hello everyone,
For an unknown reason, my mouse lately has been hanging. It has
hung with
X11 running and without X11 running. To fix it, I get to a prompt
(usually
via Ctrl+Alt+F1 as it
Hello everyone,
Today, I tried updating xorg-server and it failed. Here is the
primary error message:
make: don't know how to make /diskad3/portsBuild/Usr/ports/x11-
servers/xorg-server/work/xc/extras/Mesa/src/mesa/glapi/glapi.h. Stop
*** Error code 2
I tried updating it via portupgrade
On Nov 30, 2005, at 11:42 PM, N. Raghavendra wrote:
At 2005-11-30T21:28:40-05:00, Anthony M. Agelastos wrote:
Out of curiosity, to make sure nothing else is non-optimal, what
other user accounts were added from 5.4 to 6.0? I cannot recall,
did not save anything from 5.4, and never saw
On Nov 29, 2005, at 8:46 AM, Lowell Gilbert wrote:
Anthony M. Agelastos [EMAIL PROTECTED] writes:
Hello and thank you for your reply. I tried the following and here is
where it got me:
ast# pwd_mkdb -u _dhcp /etc/master.passwd
ast# pwd_mkdb -u _dhcp /etc/passwd
pwd_mkdb: corrupted entry
On Nov 28, 2005, at 9:06 AM, Lowell Gilbert wrote:
Anthony M. Agelastos [EMAIL PROTECTED] writes:
Hello all,
During the upgrade to 6.0, I may have created the user _dhcp
incorrectly. I was made aware of the problem when I noticed the
message during boot:
Setting hostname: ast.home.iq.
rl0
Hello all,
During the upgrade to 6.0, I may have created the user _dhcp
incorrectly. I was made aware of the problem when I noticed the
message during boot:
Setting hostname: ast.home.iq.
rl0: link state changed to DOWN
rl0: no link rl0: link state changed to UP
got link
no such user:
Hello everyone,
I am preparing my system for syncing with 6.0-STABLE and updating it
from 5.4-STABLE. In preparation, on the 6.0-RELEASE Announcement
page, it lists that some of the changes since 5.4 include:
Significant performance improvements to the filesystem and direct
disk access
On Nov 5, 2005, at 9:46 AM, RW wrote:
On Saturday 05 November 2005 13:48, Anthony M. Agelastos wrote:
will updating from 5.4 to 6.0 give me these changes or
will I have to reformat the drives with the updated UFS2?
This was asked and answer yesterday - only 11 threads ago.
I apologize
Hello.
Sometime back, I posted a message mentioning that I planned on
installing OpenOffice once it reached 2.0 status on my FreeBSD
machine using a nonstandard wrkdirprefix path (original email is
shown via the below link).
Hello all,
Once OpenOffice.org 2.0 is released, I plan on building it from Ports
on my machine (currently 5.4-STABLE... will be 6.0-STABLE after 6.0's
release). There may be one problem, though, which is my /usr/
partition only has about 2.4 GB free space available. If memory
serves, OOo
Hello all,
Is it normal for portsdb -uU to require 2 hours to complete (Pentium
III // 450 MHz // FreeBSD 5.4-STABLE from 07/27 and KERNEL = GENERIC
with very, very slight modifications primarily for architecture and
Mplayer)? I found out about this because many have recommended using
Hello everyone,
I CVSup'd my tree and did a portupgrade -arR and noticed that
py24-numeric failed to update. To make a long story short, it unpacks
Numeric into /usr/ports/math/py-numeric/work/Numeric-23.8, where the
Makefile (or something) expects the first letter in Numeric to be
lowercase
Hello everyone,
I CVSup'd my tree and did a portupgrade -arR and noticed that
py24-numeric failed to update. To make a long story short, it unpacks
Numeric into /usr/ports/math/py-numeric/work/Numeric-23.8, where the
Makefile (or something) expects the first letter in Numeric to be
lowercase
Hello everyone,
I CVSup'd my tree and did a portupgrade -arR and noticed that
py24-numeric failed to update. To make a long story short, it unpacks
Numeric into /usr/ports/math/py-numeric/work/Numeric-23.8, where the
Makefile (or something) expects the first letter in Numeric to be
lowercase
Hello everyone,
I CVSup'd my tree and did a portupgrade -arR and noticed that
py24-numeric failed to update. To make a long story short, it unpacks
Numeric into /usr/ports/math/py-numeric/work/Numeric-23.8, where the
Makefile (or something) expects the first letter in Numeric to be
lowercase
I have no idea why this was sent 3 times to the list. Sorry for the
email clog.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Jul 5, 2005, at 2:19 AM, Igor Robul wrote:
Anthony M. Agelastos wrote:
As my xorg.conf looks just about identical, does anyone on the
list have a nvidia RIVA TNT where their OpenGL works through the
nv driver? If so, I would like to figure out what makes it work
for you
On Jul 3, 2005, at 2:22 PM, markzero wrote:
(WW) The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in
(WW) this system is supported through the NVIDIA Legacy
(WW) drivers. Please visit
(WW) http://www.nvidia.com/object/unix.html for more
(WW) information. The
On Jul 3, 2005, at 11:24 PM, markzero wrote:
On Sun, Jul 03, 2005 at 10:53:43PM -0400, Anthony M. Agelastos wrote:
glxgears works for you with the nv driver? I cannot get it to work
for me (I have a RIVA TNT as opposed to your RIVA TNT 2). Could you
post your xorg.conf? I have the line Load
On Jun 30, 2005, at 5:29 AM, Alex Zbyslaw wrote:
markzero wrote:
Oh the joys of binary drivers.
I awake from a peaceful slumber after a portupgrade to find that
I suddenly no longer have X. The playful and exciting words
dance across my colourless and tormented screen:
(WW) The NVIDIA
On Jun 30, 2005, at 5:29 AM, Alex Zbyslaw wrote:
markzero wrote:
Oh the joys of binary drivers.
I awake from a peaceful slumber after a portupgrade to find that
I suddenly no longer have X. The playful and exciting words
dance across my colourless and tormented screen:
(WW) The NVIDIA
that
did not work with gnome_upgrade.sh. It built with my standard
make.conf below without any problems. Does anyone have any idea why
gnome_upgrade.sh would choke on Firefox?
On Jun 16, 2005, at 7:31 PM, Anthony M. Agelastos wrote:
Hello all,
A few days ago, I noticed that some Gnome-related
On Jun 16, 2005, at 7:45 PM, Bjrn Knig wrote:
Hello Anthony,
I suggest to try it without optimizations first. I had problems
with many ports using -march=pentium3 or even -mtune=pentium3.
Bjrn
Hello all,
I tried 2 separate cases... one with optimizing for i686 and one for
no cputype
Hello all,
A few days ago, I noticed that some Gnome-related items were ready to
be updated (I CVSup'd the Ports tree) (such as gnomehier), so I
thought why not use gnome_upgrade.sh and update everything. It did
without any problems. It finished this morning. After finishing, I
updated
On Jun 16, 2005, at 7:45 PM, Bjrn Knig wrote:
Hello Anthony,
I suggest to try it without optimizations first. I had problems
with many ports using -march=pentium3 or even -mtune=pentium3.
Bjrn
Hello,
Thank you for the reply. Out of curiosity, if I were to optimize for
i686 as opposed
[EMAIL PROTECTED] wrote:
I have a problem with very slow printing after replacing 4.1 instalation
with new 5.4 instalation (clean install, not upgrade). The printer is HP
4L, and i use it with up to date CUPS (all packages + gimp-print). With
both CUPS ang gimp-print drivers and default port
Kostas Blekos wrote:
Hi,
In some cases, when two audio events coincide (usually in gaim),
I get the following message:
Interrupt storm detected on irq9: pcm0 uhci2; throttling interrupt source
and then there is a continuous noise that I can not stop in anyway.
Does anybody knows how to
Hello all,
I am not able to print from Abiword or Gnumeric (now that I think about
it, I cannot print from LyX either... but that gives me no error
messages and, thusly, is hard to fix). I can print fine from, say
Firefox, or with the lpr command (on a PS file which is how I print
items in
Anthony M. Agelastos wrote:
Hello all,
I am not able to print from Abiword or Gnumeric (now that I think
about it, I cannot print from LyX either... but that gives me no error
messages and, thusly, is hard to fix). I can print fine from, say
Firefox, or with the lpr command (on a PS file
Sorry again, but I just realized I forgot to mention one other
thing... when I tell AbiWord to print, those errors pop up, and the
printer feeds paper through and doesn't print anything, i.e. it
prints a blank page. I did find some others with that similar problem.
that from 5.3-RELEASE
to 5.4-STABLE, the system becomes more receptive to the stray irqs?
Hope this helps,
Vinicius
Thanks again for your help. I look forward to a possibly reply.
Anthony M. Agelastos wrote:
Hello all,
I am encountering the following message on my root window:
Jun 6 14:18:53
On Jun 6, 2005, at 10:03 PM, Joe Marcus Clarke wrote:
On Sun, 2005-06-05 at 00:39 -0400, Anthony M. Agelastos wrote:
Hello all,
I wanted to start out by saying thank you to everyone who has
given me
help and has contributed to making this a good OS and community.
Down to
business... I
:
Hi,
You can find some information about it on
http://lists.freebsd.org/pipermail/freebsd-questions/2003-May/
005828.html
Hope this helps,
Vinicius
Anthony M. Agelastos wrote:
Hello all,
I am encountering the following message on my root window:
Jun 6 14:18:53 ast kernel: stray irq7
Jun 6 14
On Jun 7, 2005, at 6:33 AM, Andreas Davour wrote:
On Mon, 6 Jun 2005, Anthony M. Agelastos wrote:
Hello all,
I am encountering the following message on my root window:
Jun 6 14:18:53 ast kernel: stray irq7
Jun 6 14:43:42 ast kernel: stray irq7
Jun 6 18:18:47 ast kernel: stray irq7
Jun 6
On Jun 7, 2005, at 7:23 AM, fbsd_user wrote:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/troubleshoot.ht
ml#STRAY-IRQ
I do apologize to everyone on this list for not thoroughly checking
the FAQ.
5.22. What does stray IRQ mean?
Stray IRQs are indications of hardware IRQ
Hello all,
I am encountering the following message on my root window:
Jun 6 14:18:53 ast kernel: stray irq7
Jun 6 14:43:42 ast kernel: stray irq7
Jun 6 18:18:47 ast kernel: stray irq7
Jun 6 19:29:47 ast kernel: stray irq7
I have noticed these stray irq messages periodically, but cannot isolate
On Jun 3, 2005, at 6:17 AM, Craig Kleski wrote:
On Friday 03 June 2005 11:46 am, Anthony M. Agelastos wrote:
Hello all,
I am experiencing some problems with Maxima, namely with the plotting
and with some of the self tests. For the former, it only creates the
plots in an external Gnuplot
Hello all,
I wanted to start out by saying thank you to everyone who has given me
help and has contributed to making this a good OS and community. Down to
business... I just installed Gnumeric from Ports and when I invoke it,
it appears to work fine, but I do see warnings printed (see below).
Hello all,
I am experiencing some problems with Maxima, namely with the plotting
and with some of the self tests. For the former, it only creates the
plots in an external Gnuplot window, even if I go to [Options] / [Plot
Windows] / [Embedded]. I am primarily familiar with embedded plots and
Hello all,
After issuing many make options to mplayer when installing, I noticed
today that it can be updated. If I were to do a portupgrade -arR,
would it remember the various options? I am sure this is a common
question, but I could not find a resolute solution after reading the
Hello and thank you for your assistance. I am in the process of building
MPlayer right now and I used the following statement:
make WITH_OPTIMIZED_CFLAGS=yes WITH_GTK2=yes
WITH_DVD_DEVICE=/dev/acd1 WITH_CDROM_DEVICE=/dev/acd0
and while watching it build, I am noticing that it is using GTK1,
Hello all,
I am, as we converse, rebuilding world to 5-STABLE (from 5.4-STABLE 3
weeks ago). This is the first time that I am building a custom kernel
and it only deviates from GENERIC in that I only have
cpu I686_CPU (without the I586 and I486 that were there from
GENERIC)
and
As far as the xhost command goes, have you tried putting a at the
end, i.e.
xhost +, su, xbattbar
That backgrounds the job, which should allow you to close the xterm
from which it sprang (I could be wrong as I'm a newbie as well).
On Apr 16, 2005, at 7:16 PM, Brian Kinsey wrote:
I am using
Hello all,
My HP ScanJet 3300C will not scan due to being busy. I followed the
steps of the FreeBSD manual and will show its output below in the event
that it may help. I should note that the configuration is as follows:
FreeBSD 5.3-RELEASE // GENERIC KERNEL
Pentium III, 450 MHz
If I had to
, Glyn Millington wrote:
Anthony M. Agelastos [EMAIL PROTECTED] writes:
Interrupt storm detected on irq7: lpt0; throttling interrupt source
1. Back up /boot/device.hints
2. In device hints add a line
hint.ppc.0.flags=0x20
Flags=0x20 means disabling IRQ and use polling instead. If you add 0x08
Hello all,
My HP DeskJet 612C printer is printing unbearably slow (0.033 PPM). I
have a stock installation (GENERIC KERNEL) of FreeBSD 5.3 straight off
of the install CDs, and I have installed very little software thus far.
I have mainly followed the installation instructions from
:
On Sunday 10 April 2005 08:34 pm, Anthony M. Agelastos wrote:
Hello all,
My HP DeskJet 612C printer is printing unbearably slow (0.033 PPM).
I have a stock installation (GENERIC KERNEL) of FreeBSD 5.3
straight off of the install CDs, and I have installed very little
software thus far. I have mainly
Thank you for your reply,
When I installed CUPS (make make install), it defaulted to
ghostscript-gnu-7.07_12. After that, I installed Gimp-print. To get the
printer working, I used the web-based admin system
(http://localhost:631) and chose the 600/600c series printer drivers
the quality to 300x300 grayscale promoted the same problem with
the dmesg message:
Interrupt storm detected on irq5: lpt0; throttling interrupt source
On Apr 10, 2005, at 9:31 PM, Anish Mistry wrote:
On Sunday 10 April 2005 08:34 pm, Anthony M. Agelastos wrote:
Hello all,
My HP DeskJet 612C printer
Hello all,
While we are on the topic, after the hostname and domain have been
setup from the initial installation, how can they be changed? I went
through the FreeBSD manual and some Google searching and did not come
up with anything that made any sense. I assume there are files to be
edited,
Hello all and thank you for your help.
I have FreeBSD 5.3-RELEASE with the Minimal pre-configure install and I
have installed X.org 6.8.2. Anyways, I notice when I do a startx, that
I get the following output:
xauth: (argv):1: bad display name iqast.hsd1.ga.comcast.net:0 in
remove command
X
Hello all,
###
## Synopsis:
###
I just installed FreeBSD 5.3-RELEASE doing the prepackaged User+X11
option, I updated everything (minus the RELEASE Security updates) with
portupgrade, and then I installed xfce4 (cd /usr/ports/x11-wm/xfce4 ;
make install clean).
65 matches
Mail list logo
