Sean Bryant wrote:
Norbert Papke wrote:
On Monday 12 March 2007 20:58, [EMAIL PROTECTED] wrote:
I'm actually having the same problem, but after I took out device agp
out
of my kernel. And I still cannot start x with nvidia driver.
It complains that /dev/nvidiactl couldn't be opened. And the
Norbert Papke wrote:
On Monday 12 March 2007 20:58, [EMAIL PROTECTED] wrote:
I'm actually having the same problem, but after I took out device agp out
of my kernel. And I still cannot start x with nvidia driver.
It complains that /dev/nvidiactl couldn't be opened. And then it says it
failed
Tore Lund wrote:
[EMAIL PROTECTED] wrote:
Chris Slothouber wrote:
What version of FreeBSD are you currently running.
Sorry for pressing the point, but it seems you have not yet told us
which version of FreeBSD you are running.
/Darn this looks pretty complicated :-P
On Tuesday 13 March 2007 21:41, Sean Bryant wrote:
> It seems the driver is attached:
> [EMAIL PROTECTED]:0:0: class=0x03 card=0x chip=0x00f910de
> rev=0xa2 hdr=0x00
>
> its a 6800 GT.
In an earlier post you mentioned that there were problems with /dev/nvidiactl
and the kernel m
[EMAIL PROTECTED] wrote:
> Chris Slothouber wrote:
>> What version of FreeBSD are you currently running.
Sorry for pressing the point, but it seems you have not yet told us
which version of FreeBSD you are running.
> /Darn this looks pretty complicated :-P
In that case, it may be simpler to j
Pieter de Goeje wrote:
Yes the steps below do exactly that: upgrade everything, including the kernel.
1 Use the cvsup program (gotta figure how yet)
Use something like the following as "supfile":
--- cut
*default host=cvsup.nl.freebsd.org
*default base=/var/db
*default prefix=/usr
On Tuesday 13 March 2007 22:12, [EMAIL PROTECTED] wrote:
> Chris Slothouber wrote:
> > What version of FreeBSD are you currently running.
> >
> > Check out the FreeBSD Handbook for step-by-step instructions for
> > synchronizing your source and building an updated kernel and userland.
> >
> > http:
Chris Slothouber wrote:
What version of FreeBSD are you currently running.
Check out the FreeBSD Handbook for step-by-step instructions for
synchronizing your source and building an updated kernel and userland.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html
[E
What version of FreeBSD are you currently running.
Check out the FreeBSD Handbook for step-by-step instructions for
synchronizing your source and building an updated kernel and userland.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html
[EMAIL PROTECTED] wrote:
Piet
Roger Olofsson wrote:
Hello Pieter,
I hope this might be helpful for you. It's a forum for FreeBSD using
nvidia. You can also find it from www.nvidia.com.
http://www.nvnews.net/vbulletin/forumdisplay.php?f=47
I found alot of helpful information there when setting up my OpenGL
programming en
Pieter de Goeje wrote:
Ok, the only other reason I can think of right now is that your motherboard's
agp chipset isn't supported by the nvidia driver. In that case you'll need to
load the FreeBSD agp driver and recompile the nvidia driver with support for
freebsd's agp driver.
# cd /usr/por
[EMAIL PROTECTED] wrote:
>
> pciconf -l | grep nvidia
> [EMAIL PROTECTED]:0:0: class=0x03 card=0x21881682 chip=0x00f510de
> rev=0xa2
>
> I have a Geforce XFX 7800 GS AGP why does it show up as pci?
Mine also shows up as PCI. As long as it works, I don't mind:
%pciconf -l | grep nvi
Roger Olofsson wrote:
Hello Pieter,
I hope this might be helpful for you. It's a forum for FreeBSD using
nvidia. You can also find it from www.nvidia.com.
http://www.nvnews.net/vbulletin/forumdisplay.php?f=47
I found alot of helpful information there when setting up my OpenGL
programming en
Op dinsdag 13 maart 2007 17:44, schreef [EMAIL PROTECTED]:
> Thank you for your extensive answer. I tried both your method and the
> method described in the handbook*. I still get the same error message
> though**. I have attached MYKERNEL, maybe you can take a look at it to
> see if somethings wro
Op dinsdag 13 maart 2007 19:51, schreef Eric P. Scott:
> [Pieter de Goeje <[EMAIL PROTECTED]>]
>
> >You really need to delete 'device AGP' from your kernel config and rebuild
> >your kernel.
>
> Really? NVIDIA's README file says that shouldn't be necessary.
>
> |Note that current FreeBSD releases
Eric P. Scott wrote:
[Pieter de Goeje <[EMAIL PROTECTED]>]
You really need to delete 'device AGP' from your kernel config and rebuild
your kernel.
Really? NVIDIA's README file says that shouldn't be necessary.
|Note that current FreeBSD releases are shipped with agp.ko built into the
Hello Pieter,
I hope this might be helpful for you. It's a forum for FreeBSD using
nvidia. You can also find it from www.nvidia.com.
http://www.nvnews.net/vbulletin/forumdisplay.php?f=47
I found alot of helpful information there when setting up my OpenGL
programming environment.
Good luck!
Norbert Papke wrote:
It seems that the graphics card is not detected. Does
'pciconf -l | grep nvidia'
show anything?
What model is it? If it is an older card, you may need the older version of
the NVIDIA driver.
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Pciconf show this
On Tue 13 Mar 2007 17:03, [EMAIL PROTECTED] wrote:
> Pieter de Goeje wrote:
> >
> >Look here:
> >http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
> >or the dutch version:
> >http://www.freebsd.org/doc/nl_NL.ISO8859-1/books/handbook/kernelconfig.html
> >
> >Basically it co
[Pieter de Goeje <[EMAIL PROTECTED]>]
>You really need to delete 'device AGP' from your kernel config and rebuild
>your kernel.
Really? NVIDIA's README file says that shouldn't be necessary.
|Note that current FreeBSD releases are shipped with agp.ko built into the
|kernel; in order to allow Nv
Pieter de Goeje wrote:
Look here:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
or the dutch version:
http://www.freebsd.org/doc/nl_NL.ISO8859-1/books/handbook/kernelconfig.html
Basically it comes down to this:
# cd /usr/src/sys/i386/conf
# cp GENERIC MYKERNEL
edit
On Monday 12 March 2007 20:58, [EMAIL PROTECTED] wrote:
> I'm actually having the same problem, but after I took out device agp out
> of my kernel. And I still cannot start x with nvidia driver.
>
> It complains that /dev/nvidiactl couldn't be opened. And then it says it
> failed to load the kernel
[EMAIL PROTECTED] wrote:
In case you haven't noticed I am a total FreeBSD n00b ;). How can I
solve this error message? Thanks in advance!:
Error message
login: NVRM: AGP cannot be enabled on this combination of the AMD CPU
and OS kernel
NVRM: kernel upgrade recommended.
Unless I am misunde
Op dinsdag 13 maart 2007 16:20, schreef [EMAIL PROTECTED]:
> Do you have a link where I can more (newbie friendly) information on how
> to do this?
Look here:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
or the dutch version:
http://www.freebsd.org/doc/nl_NL.ISO8859-
Pieter de Goeje wrote:
You really need to delete 'device AGP' from your kernel config and rebuild
your kernel.
When everything is working OK, the hw.nvidia sysctl will look like this:
[EMAIL PROTECTED]:~> sysctl hw.nvidia
hw.nvidia.agp.card.rates: 8x 4x
hw.nvidia.agp.card.fw: supported
hw.nvi
Op dinsdag 13 maart 2007 14:56, schreef [EMAIL PROTECTED]:
> Hugo Silva wrote:
> > I have to disagree. Been playing Return to Castle Wolfenstein[: Enemy
> > Territory] and NeverWinter Nights 1 for years - I surely wouldn't say
> > they're "anything from slow to unplayable": NWN runs fine at max
> >
In case you haven't noticed I am a total FreeBSD n00b ;). How can I
solve this error message? Thanks in advance!:
Error message
login: NVRM: AGP cannot be enabled on this combination of the AMD CPU
and OS kernel
NVRM: kernel upgrade recommended.
___
Hugo Silva wrote:
I have to disagree. Been playing Return to Castle Wolfenstein[: Enemy
Territory] and NeverWinter Nights 1 for years - I surely wouldn't say
they're "anything from slow to unplayable": NWN runs fine at max
resolution, and I have constant 142FPS (they're capped @ 142) on ET, at
1
In my experience, games on FreeBSD are always slow, my hardware isn't very
fast (900MHz, 384MB RAM,Geforce FX5200) but on windows 2000 I'm able to
play even fairly recent games (Such as the punisher, civ4).
On FreeBSD, anything with more graphics than rogue will be anything from
slow to unplayab
Martin Tournoij wrote:
Armed Assault..?
Are you trying to run armed assault in wine? if so, then remember that
wine support for FreeBSD is horrible at best...
Anyway, I set hint.agp.0.disabled="1" and now hw.nvidia.agp.status.status
is set to "enabled" (it was disabled before)
glxgears results
I'm actually having the same problem, but after I took out device agp out
of my kernel. And I still cannot start x with nvidia driver.
It complains that /dev/nvidiactl couldn't be opened. And then it says it
failed to load the kernel module.
Any idea.
sysctl -a | grep nvidia
hw.nvidia.version: N
Martin Tournoij wrote:
Conclusion:
Use windows for games, FreeBSD for serious stuff ...
Good assessment :)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[E
On Mon, March 12, 2007 22:05, [EMAIL PROTECTED] wrote:
> OK. The line "hw.nvidia.agp.status.status: disabled" looks very odd, so
>> I had to ask. If you have also modified your xorg.conf according to the
>> docs (or used nvidia-xconfig), this is baffling. Sorry I am unable to
>> help.
>>
>>
>>> P.
[EMAIL PROTECTED] wrote:
> I have installed the port nvidia-driver. I have followed all the step in
> the readme (including adding the line to /boot/device.hint see below).
OK. The line "hw.nvidia.agp.status.status: disabled" looks very odd, so
I had to ask. If you have also modified your xo
OK. The line "hw.nvidia.agp.status.status: disabled" looks very odd, so
I had to ask. If you have also modified your xorg.conf according to the
docs (or used nvidia-xconfig), this is baffling. Sorry I am unable to help.
P.S.
I also have ran ppracer. Results:
*FreeBSD*
*110 fps*
*Gentoo Li
Tore Lund wrote:
I believe it's enough to put this line into /boot/device.hints:
hint.agp.0.disabled="1"
Is this really true? Who can confirm this? I also wonder why glxgears in
FreeBSD gives me 5000 fps, while in Linux gives me 13000. To get 5000
fps in Linux I need to disable 3d su
[EMAIL PROTECTED] wrote:
> Martin Tournoij wrote:
>> hw.nvidia.agp.status.status: disabled means that the nvidia AGP
>> driver isn't working, not that 3d acceleration isn't working.
>>
>> If you want to use the nvidia agp driver, then you should compile a
>> kernel without device agp.
>> http://www
Martin Tournoij wrote:
hw.nvidia.agp.status.status: disabled means that the nvidia AGP
driver isn't working, not that 3d acceleration isn't working.
If you want to use the nvidia agp driver, then you should compile a
kernel without device agp.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/han
hw.nvidia.agp.status.status: disabled means that the nvidia AGP
driver isn't working, not that 3d acceleration isn't working.
If you want to use the nvidia agp driver, then you should compile a
kernel without device agp.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
Running glxinfo as user works:
$ glxinfo | fgrep direct
direct rendering: Yes
3d acceleration still isn't working though :-( :
$ sysctl hw.nvidia.agp.status
hw.nvidia.agp.status.status: disabled
hw.nvidia.agp.status.driver: n/a (unused)
hw.nvidia.agp.status.rate: n/a (disabled)
hw.nvidia.agp.st
[EMAIL PROTECTED] wrote:
> I am trying for several days now to get 3d acceleration working on
> FreebSD for my XFX 7800 GS. But nothing what I've tried worked :-( .
> Below is a collection of useful information I've gathered thus far. Who
> can help me?
> *# glxinfo | fgrep direct*
> Xlib: connect
I am trying for several days now to get 3d acceleration working on
FreebSD for my XFX 7800 GS. But nothing what I've tried worked :-( .
Below is a collection of useful information I've gathered thus far. Who
can help me?
*
# sysctl hw.nvidia.agp.status*
hw.nvidia.agp.status.status: disabled
hw.
42 matches
Mail list logo
