I've got a system running on a VPS that I'm trying to upgrade from 8.2
to 8.4. It has a ZFS root. After booting the new kernel, I get:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x40
fault code = supervisor read data, page
.
There is absolutely no warranty for GDB. Type show warranty for details.
This GDB was configured as amd64-marcel-freebsd...
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x8008
fault code = supervisor
...
Unread portion of the kernel message buffer:
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address = 0x210
fault code = supervisor read data, page not present
instruction pointer = 0x20
. Type show warranty for details.
This GDB was configured as amd64-marcel-freebsd...
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
cpuid = 3; apic id = 03
fault virtual address = 0x80
fault code = supervisor read data, page not present
FreeBSD 8.0-RELEASE #0: Sat Nov 21
15:02:08 UTC 2009 r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
amd64
During 'make buildworld' the machine regulary crashes with the following
panic:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual adress
ms80 wrote:
Hi
I have a problem installing / upgrading FreeBSD 8.0-release on a new
machine.
The computers specs are:
cpu: AMD Phenom II X4
board: Gigabyte MA790GPT-UD3H
ram: 4x2GBytes DDR3/1333
hdd: 2xMaxtor STM31000528AS
nic: 4x Intel(R) PRO/1000
[snip]
So here are my
Am Saturday 06 February 2010 11:38:25 schrob Michael Powell:
ms80 wrote:
Hi
I have a problem installing / upgrading FreeBSD 8.0-release on a new
machine.
The computers specs are:
cpu: AMD Phenom II X4
board: Gigabyte MA790GPT-UD3H
ram: 4x2GBytes DDR3/1333
hdd: 2xMaxtor
On 6 February 2010 22:18, ms80 m...@dynamik.sytes.net wrote:
Am Saturday 06 February 2010 11:38:25 schrob Michael Powell:
ms80 wrote:
Hi
I have a problem installing / upgrading FreeBSD 8.0-release on a new
machine.
The computers specs are:
cpu: AMD Phenom II X4
board: Gigabyte
ms80 wrote:
[snip]
Thank you for your reply.
I'm using two of this: OCZ3P1333LVAM4GK
(OCZ DDR3 AMD Edition, rated for 1333MHz at 1.65V). My Board is rated for
1066 - 1600 MHz memory, and neither the website nor the manual say
anything about limitations with memory. Anyway: I didn't
Am Saturday 06 February 2010 14:03:06 schrob David N:
[snip]
What power supply do you have?
How many watts? brand?
If you have insufficient power, it may cause the system to become unstable.
Regards
David N
I tested with an Enermax EPR425AWT Pro82+ II, 425W wich was the psu I bought
Am Saturday 06 February 2010 14:37:16 schrob Michael Powell:
ms80 wrote:
[snip]
There seems to be a general feeling the newer AMD processors don't much
care for higher memory voltages. Try lowering your voltages and see if it
helps.
I am successfully using this board with the CPU clock
/1000
and I'm running
FreeBSD phenom2.localnet 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21
15:02:08 UTC 2009
r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
During 'make buildworld' the machine regulary crashes with the following
panic:
Fatal trap 12: page fault
Someone has had problems with this type of issues? what it is related to?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
:
- Forwarded message from ge...@dts.su -
Date: Sat, 6 Jun 2009 10:58:11 +0400
From: ge...@dts.su
To: freebsd-questions@freebsd.org
Subject: Re[2]: fatal trap 12
Hello, Freebsd-questions.
After one of new crash I have this:
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation
copying to see the conditions.
There is absolutely no warranty for GDB. Type show warranty for details.
This GDB was configured as amd64-marcel-freebsd...
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address
it and/or distribute copies of it under certain
conditions.
Type show copying to see the conditions.
There is absolutely no warranty for GDB. Type show warranty for details.
This GDB was configured as amd64-marcel-freebsd...
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while
-marcel-freebsd...
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address = 0x0
fault code = supervisor read data, page not present
instruction pointer = 0x8:0x804c4eb8
stack pointer
for
details.
This GDB was configured as amd64-marcel-freebsd...
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address = 0x0
fault code = supervisor read data, page not present
instruction
of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address = 0x0
fault code = supervisor read data, page not present
instruction pointer = 0x8:0x804c4eb8
stack pointer = 0x10
]: fatal trap 12
Hello, Freebsd-questions.
After one of new crash I have this:
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under
Hello, Freebsd-questions.
I use FreeBSD 7.2-STABLE amd64. About month ago system was crashed
with Fatal trap 12...
I bay new hardware and install new FreeBSD 7.2-STABLE amd64. cPanel
and ASSP (anti spam proxy). And one a day or two days have this:
Fatal trap 12: page fault while
On Saturday 11 April 2009 19:34:29 Paul Hamilton wrote:
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Ray
Sent: Saturday, 4 April 2009 01:45
To: freebsd general questions
Subject: questions about Fatal Trap 12
On Tue, Apr 14, 2009 at 5:23 PM, Ray r...@stilltech.net wrote:
I Just had the power supply die on this machine. Could a failing power supply
cause this type of issues?
Absolutely.
--
Glen Barber
___
freebsd-questions@freebsd.org mailing list
Glen Barber wrote:
On Tue, Apr 14, 2009 at 5:23 PM, Ray r...@stilltech.net wrote:
I Just had the power supply die on this machine. Could a failing power
supply
cause this type of issues?
Absolutely.
Seconded. Power supply issues have caused me this kind of grief more
times than memory
Steve Bertrand wrote:
Glen Barber wrote:
On Tue, Apr 14, 2009 at 5:23 PM, Ray r...@stilltech.net wrote:
I Just had the power supply die on this machine. Could a failing power
supply cause this type of issues?
Absolutely.
Seconded. Power supply issues have caused me this kind of grief
Thanks Paul and Chris,
So what It comes down to is that this error is most likely a hardware problem,
and I'll just have to bring the machine down for hardware replacement and/or
testing?
Thanks,
Ray
___
freebsd-questions@freebsd.org mailing list
On Mon, 13 Apr 2009 18:31:31 +0300, Ray r...@stilltech.net wrote:
Thanks Paul and Chris,
So what It comes down to is that this error is most likely a hardware
problem,
and I'll just have to bring the machine down for hardware replacement
and/or
testing?
Usually yes. Back in the days
2009/4/9 Ray r...@stilltech.net:
On Friday 03 April 2009 11:44:31 Ray wrote:
Hello,
I have received a kernel Trap 12 error several times now and am trying to
figure it out.
the error occurred today, and the previous time was about two weeks ago.
last time I had to run fsck manually if that
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Ray
Sent: Saturday, 4 April 2009 01:45
To: freebsd general questions
Subject: questions about Fatal Trap 12
Hello,
I have received a kernel Trap 12 error several times
On Friday 03 April 2009 11:44:31 Ray wrote:
Hello,
I have received a kernel Trap 12 error several times now and am trying to
figure it out.
the error occurred today, and the previous time was about two weeks ago.
last time I had to run fsck manually if that proves anything.
uname -a gives
Hello,
I have received a kernel Trap 12 error several times now and am trying to
figure it out.
the error occurred today, and the previous time was about two weeks ago.
last time I had to run fsck manually if that proves anything.
uname -a gives the following:
FreeBSD wserver..com
On Tue, 17 Mar 2009 06:35:04 +0300 anb...@list.ru wrote:
What can I do with it? I don`t have experience in using gdb or programming on
C.
I suppose your kernel is built with makeoptions DEBUG=-g.
Then enable kernel crash dump:
echo 'dumpdev=AUTO' /etc/rc.conf
/etc/rc.d/dumpon start
After
Hello,
I have problem with FreeBSD 7.1-STABLE/i386.
We have FreeBSD-based cluster of VPN servers (mpd3.18 as PPTP server), and
sometimes its fall down.
#dmesg | less
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x1ac
fault code
John L. Templer wrote:
I'm running 7.1-PRERELEASE, with /usr/src and /usr/ports last csup-ed
just a few days ago. After being up for about a day or so the system
will panic because of a page fault. I'm not completely sure, but it
seems that the system is more stable when gdm and gnome are
show copying to see the conditions.
There is absolutely no warranty for GDB. Type show warranty for details.
This GDB was configured as i386-marcel-freebsd...
Unread portion of the kernel message buffer:
acd1: WARNING - READ_TOC read data overrun 1812
Fatal trap 12: page fault while in kernel
_
Check out Barclays Premier League exclusive video clips here!
http://fc.sg.msn.com/index.aspx___
freebsd-questions@freebsd.org mailing list
Hi
I am getign this serios error message when i have packaged free radius in
freebsd 6.3
Fatal Trap 12: page fault while in kernel mode
fault virtual address
fault code = supervisor write , page not present
instruction pointer = 0*20
stack pointer =
curent process = 0
trap njumber
Devinder Singh wrote:
Hi I am using Free BSD 6.3 and am intergating Monowal and FreeRadius
When i make the image i get this error
Fatal Trap 12 :page fault while in kernel mode
Fault virtual addres 0xbffle000
fault code -= supervisor write, page not present
instruction pointer = 0*28
Hi I am using Free BSD 6.3 and am intergating Monowal and FreeRadius
When i make the image i get this error
Fatal Trap 12 :page fault while in kernel mode
Fault virtual addres 0xbffle000
fault code -= supervisor write, page not present
instruction pointer = 0*28 =
trap number 12
panic
Rudy wrote:
My kernel panics!
Here are a two things I did which seem to stop the Fatal trap 12's with FreeBSD-7.0-RELEASE (saw it
on three different boxes):
cvsup to FreeBSD-7.0-STABLE
(Don't forget to change SCHED_4BSD -- SCHED_ULE as that is now the default
on STABLE)
disabled CARP
Rudy wrote:
Rudy wrote:
My kernel panics!
Here are a two things I did which seem to stop the Fatal trap 12's with
FreeBSD-7.0-RELEASE (saw it on three different boxes):
cvsup to FreeBSD-7.0-STABLE
(Don't forget to change SCHED_4BSD -- SCHED_ULE as that is now the
default on STABLE
: Mon May 12 15:17:23 PDT 2008
root@:/usr/obj/usr/src/sys/EXAMPLE i386
# crash message:
Fatal trap 12: page fault while in kernel mode
instruction pointer = 0x20:0xc05330da
Following this advice:
http://www.freebsd.org/doc/en/books/faq/advanced.html#KERNEL-PANIC-TROUBLESHOOTING
Nothing
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Roberto Nunnari
Sent: Tuesday, April 29, 2008 12:35 PM
To: freebsd-questions@freebsd.org
Subject: Re: raid1 + degraded (take out one disk) + fatal trap 12 on
next reboot
Nobody on this, please? :)
Roberto Nunnari wrote:
Hi all
+ degraded (take out one disk) + fatal trap 12 on
next reboot
Nobody on this, please? :)
Roberto Nunnari wrote:
Hi all!
I'm playing with new HW and FreeBSD 6.3 and 7.0.
I set up raid 1 on two sata disks (fakeraid on ICH9R)
and as long as I can see, it seams to work very well.
Now I'm trying
Nobody on this, please? :)
Roberto Nunnari wrote:
Hi all!
I'm playing with new HW and FreeBSD 6.3 and 7.0.
I set up raid 1 on two sata disks (fakeraid on ICH9R)
and as long as I can see, it seams to work very well.
Now I'm trying to simulate 1 disk failure (I just take
out a disk and boot
Hi all.
Some problem with free.
I`ve got such mess in log:
Jan 4 22:47:09 fs kernel: Fatal trap 12: page fault while in kernel mode
Jan 4 22:47:09 fs kernel: fault virtual address= 0x3e
Jan 4 22:47:09 fs kernel: fault code = supervisor read, page not present
Jan 4 22:47:09 fs kernel
On Saturday 06 October 2007, Joe Altman wrote:
chthonic.com/crash-crash-crash
Hi,
Do you have options KDB in your kernel config file ?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug-options.html
You should get a prompt when it panics. Then you type in bt for
On Sun, Oct 07, 2007 at 11:01:41AM +0200, Hans Petter Selasky wrote:
On Saturday 06 October 2007, Joe Altman wrote:
chthonic.com/crash-crash-crash
Hi,
Do you have options KDB in your kernel config file ?
Following your suggestion, I did try this; and there was no
change from kernel panic
20480 2048 0%
AIUI, dumpdev=AUTO dictates the use of /dev/ad0s1b.
/var/tmp has this much free space:
df -m
/dev/ad0s1f 3962 618 302717%/var/tmp
However, my kernel tosses this message to the console:
Fatal trap 12: page fault while in kernel mode
snip
seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...6 5 3 1 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x4
fault code = supervisor read, page
Meijome [EMAIL PROTECTED]
To: Worth Bishop [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Wednesday, June 13, 2007 12:52 PM
Subject: Re: FreeBSD 6.2 Repeating Crash - Sleeping thread; Fatal trap 12:
page fault; warning: 'T2' might be used uninitialized
On Tue, 12 Jun 2007 11:38:19 -0400
On Tue, 12 Jun 2007 11:38:19 -0400
Worth Bishop [EMAIL PROTECTED] wrote:
Addendum: For what it's worth, the 250Gb Samsung drive was added when the
system was upgraded - it's only 3-4 months old.
Worth,
that doesnt mean much - drives can (and do) fail anyway. I suggest you run
smartctl (
Read:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html
Also, is your /usr/src tagged RELENG_6_2 ? You can remove DEBUG=-g and
that problem does not occur?
You didn't try to update your src to tree to STABLE or CURRENT?
~~BAS
On Tue, 2007-06-12 at 11:33
Hardware can be eliminated by running memtest86 bootable ISOs from the
web site. A bad sector test on the drives would be less ambiguous
(kernel messages preceeding a panic). Smart can be helpful.
Overheating CPUs and underpowered/overheated Power Supplies can cause
problems, but they would
a message similar to this was displayed:
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
cpuid=0; apic id=01
fault virtual address
=0x100
fault code
=supervisor read, page not present
instruction pointer
=0x20:0xc066c731
stack pointer
=0x28:0xe432ebf0
Crash - Sleeping thread; Fatal trap 12: page
fault; warning: 'T2' might be used uninitialized
Please help if you can...
BACKGROUND
This crash is occurring on a dual-AMD 1.6Ghz cpu white-box system with 1
Gb ram, 250Gb storage running GENERIC kernel. The system has been in
production use
Hi, I'm running 5.4 with a modified GENERIC kernel, and I recently rebooted
my system to find out that it hangs on probing ad1 with a fatal trap 12.
Here's the entire error message
ad1 Timeout - Read_dma retrying (2 retries left) LBA 117231345
kernel trap 12 with interrupts disabled
Fatal trap
On Thursday 04 January 2007 21:47, christopher floess wrote:
Hi, I'm running 5.4 with a modified GENERIC kernel, and I recently
rebooted my system to find out that it hangs on probing ad1 with a
fatal trap 12.
Here's the entire error message
ad1 Timeout - Read_dma retrying (2 retries left
Trying to install 6.1 on a Gigabyte 8i955 Royale motherboard, with an
Intel D840 and 2GB of RAM onboard. However, booting up from the 6.1 CD
results in a locked up system and this on the screen:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x4
fault code = supervisor
Never mind, turned out to be dodgy RAM.
--
Juha
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello
I use FreeBSD6.0.
The machine is be locked every week. it gives an error as below:
I add to kernel multi cpu support. Also I haven't changed the kernel
fatal trap 12: page default while in kernel mode
cpuid=1 ; apic id = 00
fault code = supervisor write, page not present
trap number
Hello
I use FreeBSD-release6.0. the server gives an error on display as below and be
locked about every 10 days.
Fatal trap 12: page fault while in kernel mode
...
...
The server has 1 gbyte Ram, P3-550 Mhz, 2 CPU.
SMP is active in kernel.
What shall I do
crashes very soon with the following output:
$PIR : BIOS IRQ 10 for 0.11INTA does not match link 0x63 irq 5
pci0 : PCI bus on pcib0
fatal trap 12 : page code fault while in kernel mode
fault virtual address = 0xeba60
fault code = supervisor read, page not present
instruction pointer
:
$PIR : BIOS IRQ 10 for 0.11INTA does not match link 0x63 irq 5
pci0 : PCI bus on pcib0
fatal trap 12 : page code fault while in kernel mode
fault virtual address = 0xeba60
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc00eb961
frame pointer = 0x28:0xc10209e4
Timecounters tick every 10.000 msec
md0: Preloaded image /mfsroot 4423680 bytes at 0xc0a34270
ad0: 9541MB WDC WD100EB-00BHF0/15.15M15 [19386/16/63] at ata0-master
UDMA33
acd0: CDROM ATAPI CDROM/V1.50 at ata1-slave PIO4
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x1
fault code
On Tue, Oct 25, 2005 at 02:18:10PM -0400, Dave wrote:
Hello,
I'm trying to do a 5.4-release install on an older box, it's an AT
motherboard, and i hope that's not my problem. I'm getting the below error
and would appreciate any help.
Try disabling acpi, many older motherboards had broken
I am trying to install FreeBSD 5.4 on a Dell GX280 and am getting a
Fatal trap 12 supervisor write, page not present error. From what
I've read, this is an ACPI problem which I could disable if I had a
PS2 port, but the GX280 doesn't have them. Has anyone gotten 5.4 to
run properly on a GX280
June 2005 22:10
To: freebsd-questions@freebsd.org
Subject: 5.4 Installation Problems on Dell GX280 - Fatal trap 12
I am trying to install FreeBSD 5.4 on a Dell GX280 and am getting a
Fatal trap 12 supervisor write, page not present error. From what
I've read, this is an ACPI problem which I could
:-(
Hope this helps,
Stuart
-Original Message-
From: John Vaughan [mailto:[EMAIL PROTECTED]
Sent: 21 June 2005 22:10
To: freebsd-questions@freebsd.org
Subject: 5.4 Installation Problems on Dell GX280 - Fatal trap 12
I am trying to install FreeBSD 5.4 on a Dell GX280 and am getting
,
Stuart
-Original Message-
From: John Vaughan [mailto:[EMAIL PROTECTED]
Sent: 21 June 2005 22:10
To: freebsd-questions@freebsd.org
Subject: 5.4 Installation Problems on Dell GX280 - Fatal trap 12
I am trying to install FreeBSD 5.4 on a Dell GX280 and am getting a
Fatal trap 12
On 4 May 2005 at 9:35, Lowell Gilbert wrote:
Dan Langille [EMAIL PROTECTED] writes:
Hi folks. My gateway has been getting this a few times a day for the
past few days.
Fatal trap 12: page fault while in kernel mode
More detail at http://www.langille.org/tmp/fatal-trap-12.txt
On 4 May 2005 at 9:35, Lowell Gilbert wrote:
Dan Langille [EMAIL PROTECTED] writes:
Hi folks. My gateway has been getting this a few times a day for the
past few days.
Fatal trap 12: page fault while in kernel mode
More detail at http://www.langille.org/tmp/fatal-trap-12.txt
Dan Langille [EMAIL PROTECTED] writes:
Hi folks. My gateway has been getting this a few times a day for the
past few days.
Fatal trap 12: page fault while in kernel mode
More detail at http://www.langille.org/tmp/fatal-trap-12.txt
Conversations to date indicate a hardware problem
On 4 May 2005 at 9:35, Lowell Gilbert wrote:
Dan Langille [EMAIL PROTECTED] writes:
Hi folks. My gateway has been getting this a few times a day for the
past few days.
Fatal trap 12: page fault while in kernel mode
More detail at http://www.langille.org/tmp/fatal-trap-12.txt
Hi folks. My gateway has been getting this a few times a day for the
past few days.
Fatal trap 12: page fault while in kernel mode
More detail at http://www.langille.org/tmp/fatal-trap-12.txt
Conversations to date indicate a hardware problem. Any
recommendations/suggestions?
--
Dan
Hello, I am trying to install FreeBSD from floppies on a 486-DX-33, and with
the three floppies I made I cant get to the boot menu screen (with the devil)
but if I attempt to boot I get a Fatal trap 12: page fault while in kernal
mode error. The same error happens if I try safe mode except my
nicholaserho wrote:
Hello, I am trying to install FreeBSD from floppies on a 486-DX-33, and with
the three floppies I made I cant get to the boot menu screen (with the devil)
but if I attempt to boot I get a Fatal trap 12: page fault while in kernal
mode error. The same error happens if I try safe
Ref :
http://lists.freebsd.org/pipermail/freebsd-questions/2004-May/046387.html
I am still having this problem in FreeBSD 5.2.1 with an SIS630 Chipset
The set hw.pcic.intr_path and set hw.pcic.irq commands worked in
versions 4.x
Does anyone know the equivalent commands for 5.x
Thanks
Fatal Trap 12: page fault while in kernel mode
And then tries to reboot. Over and over again. I seem to recall there
was a known fix for this behaviour...
Thanks in advance for any advice.
---
Andy Holyer, Systems Administrator
Hedgehog Broadband, 11 Marlborough Place Brighton BN1 1UB
08451
Attempting to do hardware upgrades. alas, since I dropped in a new
motherboard / processor combo, I get (hand transposed):
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x5e
fault code = supervisor write, page no present
instruction pointer = 0x8
to 5.x, and
in that case, the installation procedure is a bit different and gives
you that choice fairly early on.
Fatal Trap 12 means non-existent system call invoked. Seeing it
while attempting to boot a kernel either means that the kernel is
broken, or that you have hardware problems
:
Jun 29 20:37:09 candice kernel:
Jun 29 20:37:09 candice kernel: Fatal trap 12: page fault while in kernel mode
Jun 29 20:37:09 candice kernel: cpuid = 0; apic id = 00
Jun 29 20:37:09 candice kernel: fault virtual address = 0xc5f12321
Jun 29 20:37:09 candice kernel: fault code
Hi,
Recently my freebsd machine always dead, and the below error messages are gotten when
reboot the machin, could anyone help me?
Jun 24 09:09:02 pearl kernel: Fatal trap 12: page fault while in kernel mode
Jun 24 09:09:02 pearl kernel: fault virtual address = 0xe852eba9
Jun 24 09:09
On Wed, Jun 23, 2004 at 09:52:48PM -0400, fred wrote:
Hi,
Recently my freebsd machine always dead, and the below error messages are gotten
when reboot the machin, could anyone help me?
Start by updating to a modern release; there have been literally
thousands of bugs fixed since
On Mon, Apr 05, 2004 at 06:24:12PM -0700, [EMAIL PROTECTED] wrote:
Were installing 5.2 from discs we purchased from BSD
Mall. The system starts to load, The daeman page shows
up with the boot options. What ever we pick it ends up
showing the Error message: Fatal trap 12: page fault
while
I have a fresh install if FBSD 4.9 rc2 with bge0 Netgear 302T( gigabit
ethernet interface)
the machine runs fine when left alone...however whenever i try to do large
file transfers across my LAN to the BSD box ..i get an error like:
Fatal trap 12: page fault while in kernel mode
this seems
Were installing 5.2 from discs we purchased from BSD
Mall. The system starts to load, The daeman page shows
up with the boot options. What ever we pick it ends up
showing the Error message: Fatal trap 12: page fault
while in Kernel mode.
any suggestions?
thanx
Hello, my name is Marco Giardini. My problem is the following one: When the
operating system initiates leaves mensage to me error that makes me
reinitiate the maquina. mensage that leaves is fatal trap 12.
___
[EMAIL PROTECTED] mailing list
http
On Mon, Mar 01, 2004 at 01:11:49PM -0300, Marco wrote:
Hello, my name is Marco Giardini. My problem is the following one: When the
operating system initiates leaves mensage to me error that makes me
reinitiate the maquina. mensage that leaves is fatal trap 12.
http://www.freebsd.org/doc
. mensage that leaves is fatal trap 12.
http://www.freebsd.org/doc/es_ES.ISO8859-1/books/faq/troubleshoot.html#Q4.9.
Fatal trap 12 happens for much the same reasons as Signal 11.
Try running this to see if you can confirm hardware errors.
Oops. I meant to add: http://www.memtest86.com
Over the weekend my bsd 4.9 apparantly rebooted for kicks by itself,
reporting a fatal trap 12 in messages. I looked through the list history
and found some posts indicating it may be a memory issue. Im hoping
someone can confirm/deny this for me so I know how to start tracking
this down
Daren Desjardins wrote:
Over the weekend my bsd 4.9 apparantly rebooted for kicks by itself,
reporting a fatal trap 12 in messages. I looked through the list history
and found some posts indicating it may be a memory issue.
If you suspect a memory problem, then try getting your BIOS to find
Hi folks,
I'm brand new to FreeBSD (but I've worked with Unix and Linux a little). I'm
trying to install FreeBSD, but I constantly get this Fatal Trap 12: page
fault while in kernel mode error. I don't know where to begin to try and
solve this so I can proceed with my install. Suggestions??? Thank
On Tue, Nov 18, 2003 at 07:16:29AM -0800, Craig Caughlin wrote:
I'm brand new to FreeBSD (but I've worked with Unix and Linux a little). I'm
trying to install FreeBSD, but I constantly get this Fatal Trap 12: page
fault while in kernel mode error. I don't know where to begin to try and
solve
I have a nasty feeling that this may be a hardware problem rather than
FreeBSD, but any pointers appreciated.
Over the last couple of days, with no changes in configuration, one of
my boxes has started to die with increasing frequency, throwing up
errors like this:
Fatal trap 12: Page trap while
.
Over the last couple of days, with no changes in configuration, one of
my boxes has started to die with increasing frequency, throwing up
errors like this:
Fatal trap 12: Page trap while in kernel mode
Fault virtual address = 0x2c2
fault code = supervisor writ
-a:
FreeBSD creadle.oc.cox.net 4.8-RELEASE-p13 FreeBSD 4.8-RELEASE-p13 #4: Wed
Oct 15 08:55:21 PDT 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CREADLE i386
/var/log/messages:
Oct 14 21:45:23 creadle /kernel: Fatal trap 12: page fault while in kernel
mode
Oct 14 21:45:23 creadle /kernel: fault virtual
and working on the readmes,
though.
/var/log/messages:
Oct 16 01:26:37 creadle /kernel: Fatal trap 12: page fault while in kernel
mode
Oct 16 01:26:37 creadle /kernel: fault virtual address = 0xfd9b
Oct 16 01:26:37 creadle /kernel: fault code = supervisor read,
page not present
Oct
16 01:26:37 creadle /kernel: Fatal trap 12: page fault while in kernel
mode
Oct 16 01:26:37 creadle /kernel: fault virtual address = 0xfd9b
Oct 16 01:26:37 creadle /kernel: fault code = supervisor read,
page not present
Oct 16 01:26:37 creadle /kernel: instruction pointer= 0x8
the index and working on the readmes,
though.
/var/log/messages:
Oct 16 01:26:37 creadle /kernel: Fatal trap 12: page fault while in
kernel
mode
Oct 16 01:26:37 creadle /kernel: fault virtual address = 0xfd9b
Oct 16 01:26:37 creadle /kernel: fault code = supervisor
read,
page
1 - 100 of 124 matches
Mail list logo
