nicky wrote:
Hello,
This morning i had another 'sleeping' 6-stable box. I don't really
understand why it sleeps. I've checked acpi, but i doubt that is it.
Since at the time when it goes to sleep, it does some heavy
processing. I don't think it would choose to go to sleep then. The
most
Dear Kris and others,
On Thu, 9 Nov 2006, Kris Kennaway wrote:
OK, you'll need to do some more diagnosis along the lines of my previous email
then.
Here's my typical load:
last pid: 96934; load averages: 0.03, 0.06, 0.05 up 29+20:47:07
10:16:09
68 processes: 1 running, 67 sleeping
Charles E. Boston wrote:
Hi there,
Can any one tell if the Dell PERC 2 PERC 3 RAID configurations are still
supported in the FreeBSD 6.1 release? I'm in need of a Linux server OS and i have
the PERC 2/SC RAID setup in my PowerEdge 2300. I have tried quite a few distros and
none have worked
Hello,
On Thu, 9 Nov 2006, Jonathan Horne wrote:
any update on your freezing? i have the same problem from time to time, and
ive considered changing to the other scheduler, but i never have. did you do
it yet, and is there any difference?
I checked some logs and see this:
E 20061110
Hi,
I solved the problem, and I'll post the resolution for reference
purposes. There were two configuration issues:
1) To enable MPPE encryption the encryption option on the bundle should
be DISABLED, since MPPE lives in the compression layer and not the
encryption layer; thus by commenting
Sir,
Does FreeBSD 6.1 fully support Intel Desktop Board D945GNT with
Hyperthreading technology enabled?
Dawood Muslim
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
On 09/11/2006 09:12, Zbigniew Szalbot wrote:
Hello,
I am running FBSD 6-1 stable with custom kernel. Occasionally I
experience short freezes - that is the machine stops to respond for a
few seconds and then happily starts to work again.
My general question is what log should I inspect or
Hello,
On Fri, 10 Nov 2006, Karol Kwiatkowski wrote:
Just a shot in the dark, but I haven't seen it mentioned yet:
have you used any variables affecting kernel compilation, especially
CPUTYPE, CFLAGS, COPTFLAGS? I remember seeing some strange effects
when I messed with them too much (we've
On 11/10/06, Zbigniew Szalbot [EMAIL PROTECTED] wrote:
Hello,
On Fri, 10 Nov 2006, Karol Kwiatkowski wrote:
Just a shot in the dark, but I haven't seen it mentioned yet:
have you used any variables affecting kernel compilation, especially
CPUTYPE, CFLAGS, COPTFLAGS? I remember seeing some
Hello Andy,
On Fri, 10 Nov 2006, Andy Greenwood wrote:
the CPUTYPE, CFLAGS and COPTFLAGS are make.conf variables, not kernel
config options.
Well, thank you. Shame but I wasn't even remotely aware of it! And for
this reason these are all commented out.
Thanks again!
--
Zbigniew Szalbot
On 10/11/2006 14:29, Zbigniew Szalbot wrote:
Hello,
On Fri, 10 Nov 2006, Karol Kwiatkowski wrote:
Just a shot in the dark, but I haven't seen it mentioned yet:
have you used any variables affecting kernel compilation, especially
CPUTYPE, CFLAGS, COPTFLAGS? I remember seeing some strange
On Thu, Nov 09, 2006 at 10:37:07AM -0500, Michael P. Soulier wrote:
So, I tried to do a portupgrade on irssi.
I did a make config first, and turned on proxy support, socks proxy support,
and themes.
I then did a portupgrade -R irc/irssi
It ended badly.
=== Installing for
Hi
Ive just run a portupgrade trying to get some troublesome ports up to
date. I noticed after it finished some things werent working anymore
like gedit, open office...
I copied the output of my portupgrade report but had to reboot and
lost it!
Now when i try login i get this message:
Your
Eric [EMAIL PROTECTED] writes:
No bites on this yesterday. can anyone shed some light on it?
Most of us assume that one would only use non-standard security
configurations if one *really* knew exactly what one was doing...
is this something i should or shouldnt have in my make.conf?
I use
Sergey Solyanik [EMAIL PROTECTED] writes:
Hello!
I have a problem with my -STABLE, fxp(4) doesn't detect available media
in the Intel 82801GB onboard NIC. It shows that:
[EMAIL PROTECTED] ifconfig fxp1
fxp1: flags=9943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST
mtu 1500
Chris [EMAIL PROTECTED] writes:
I'm still trying to figure out why the standard tftp won't accept ack
connections from 0.0.0.0. It will recv ack's from a normal IP address
just fine.
It can't be the firewall because I can set it to pass all and
restart with the same results.
The tftp
Lowell Gilbert wrote:
Eric [EMAIL PROTECTED] writes:
No bites on this yesterday. can anyone shed some light on it?
Most of us assume that one would only use non-standard security
configurations if one *really* knew exactly what one was doing...
is this something i should or shouldnt have
Hello,
When I use `pkg_cutleaves -l` to list leaf nodes. It is listing things
I know are required by other apps. These aren't build dependencies.
For example, it lists g-wrap, and libpcap. If I remove g-wrap, my
gnucash2 immediately refuses to run. And I know libpcap was an option
I
On Wed, Nov 08, 2006 at 11:12:43AM -0500, Bob Schwartz wrote:
Sorry for top posting, but I think, given the conditions you specify,
probably the best thing for you to do is buy another drive - and replace one
of the others to experiment with FreeBSD for a while.
Kindly see my post of this
On Wed, Nov 08, 2006 at 08:42:04AM +, Jan Grant wrote:
On Tue, 7 Nov 2006, Bob Schwartz wrote:
... at least as it is desribed in the DELL
docs and bios...
Be really careful. The windows boot loader should be able to boot a
freebsd install for you.
I have never had a Windows MBR
I figured that must have something to do with the way
MySQL stores and php encrypts/decrypts data.
I used mysqldump and saw that the passwords in MySQL
are stored as Blowfish hashes, and I suspect that php
uses a different algorithm when it tries to
authenticate against the mysql database. As a
On Wed, Nov 08, 2006 at 10:30:33AM -0500, Bob Schwartz wrote:
Be really careful. The windows boot loader should be able to boot a
freebsd install for you.,
Thank you.
Either one works for me as long as I get full choice. If the windows loader
simply picks up bsd and offers it in
Lowell Gilbert wrote:
I have a problem with my -STABLE, fxp(4) doesn't detect available media
in the Intel 82801GB onboard NIC. It shows that:
[EMAIL PROTECTED] ifconfig fxp1
fxp1: flags=9943UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST
mtu 1500
options=8VLAN_MTU
inet
Hello List,
I tried gvinum RAID-5 with a 5-Stable around the time when 5.1 or 5.2
was released (afair) and back then it basically sucked big time. Raid
worked as long as nothing failed, but reconstructing a drive was
somewhere between very painful and not possible.
Now I will have to upgrade
Hi
thank you guys. I just ordered a TV card from Avermedia, it should be
using brooktree chip. i chose AverMedia over Happahauge simply because it's
less expensive. :-) (i actually live in long island, Happahauge is just
right here...). I expect i will have some twicking to do to make it work,
В сообщении от Пятница 10 ноября 2006 22:18 Tsu-Fan Cheng написал(a):
Hi
thank you guys. I just ordered a TV card from Avermedia, it should be
using brooktree chip. i chose AverMedia over Happahauge simply because it's
less expensive. :-) (i actually live in long island, Happahauge is just
Hi,
This has just occurred to one of our servers that installed and has been
working fine for months. The only thing that changed between it booting
and not booting was that we unplugged the keyboard and mouse prior to the
last successful boot and now get the mountroot message (even though
Dear FreeBSD,
For the packages mozilla and inkscape, I cannot locate or install
libpangocairo.so
Where can I find it?
inkscape
/libexec/ld-elf.so.1: Shared object libpangocairo-1.0.so.0 not found,
required by inkscape
This system is FreeBSD 5.5, fresh cvsup of all sources and
hi,
mine is in /usr/local/lib/, did you install x11-toolkit/pango?
TFC
On 11/10/06, Wayne M Barnes [EMAIL PROTECTED] wrote:
Dear FreeBSD,
For the packages mozilla and inkscape, I cannot locate or install
libpangocairo.so
Where can I find it?
inkscape
/libexec/ld-elf.so.1: Shared
How to get the best results from FreeBSD questions.
===
Last update $Date: 2005/08/10 02:21:44 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
I've posted several questions (under two other ids though the name
Chris)
since March trying to put up a Tyan quad dual s4882. I've run it on 6.0
STABLE as of about March, 6.1 RELEASE in several flavors from May
through September and finally 6.2 PRERELEASE as of mid-October. I
found issues
Robert Fitzpatrick wrote:
Can anyone here recommend an IM client/server software that runs on
FreeBSD? I'm looking at DBabble, but I see no port (which would be
nice). We like BSD servers and are getting a lot of requests for this
type of private service. But if BSD is not recommended, please
I have compiled and installed mpd 4.0b5
on my PC with FreeBSD 6.1-RELEASE.
Then I created the next files:
# mpd.conf
default:
new ukrtelecom dsl
set auth authname [EMAIL PROTECTED]
set iface route default
open iface
# mpd.links
dsl:
set link type pppoe
On Fri, 10 Nov 2006 11:18:54 -0500 Tsu-Fan Cheng wrote:
thank you guys. I just ordered a TV card from Avermedia, it should be
using brooktree chip. i chose AverMedia over Happahauge simply because it's
Are you sure that the chip will be a brooktree one? Modern Avermedia
use philips chips. And
ahh.. really?? bktr (4) said it's based on brooktree, here:
The *bktr* driver supports video capture cards based on the Brooktree
Bt848/849/878/879 chips, as well as Pinnacle PCTV cards, including:
*·* AOpen VA1000
*·* AVerMedia AVerTV Studio
*·* AVerMedia TF/FM-98
but you
On Fri, Nov 10, 2006 at 07:57:09AM +0200, Luke Lamla wrote:
Can you please assist me I am using FreeBSD for my e-mail and internet. I
want to create e-mail using super user (root) for my employees. What should
I do or which steps should I follow to do that. I will appreciate your
support
On Fri, 2006-11-10 at 22:28 +0600, Bachilo Dmitry wrote:
В сообщении от Пятница 10 ноября 2006 22:18 Tsu-Fan Cheng написал(a):
Hi
thank you guys. I just ordered a TV card from Avermedia, it should be
using brooktree chip. i chose AverMedia over Happahauge simply because it's
less
On Fri, Nov 10, 2006 at 02:22:14PM -0500, Mike Jeays wrote:
On Fri, 2006-11-10 at 22:28 +0600, Bachilo Dmitry wrote:
?? ?? ?? 10 2006 22:18
Tsu-Fan Cheng ??(a):
Hi
thank you guys. I just ordered a TV card from Avermedia, it
Hi:
I updated my ports tree a few days ago, and again today (right now). The
firefox port was updated. I then updated the vulnerability database - or
so I thought with portaudit. But building firefox complain about
remaining vulnerabilities.
So - what's the point? I mean updating the port
is there any way to have NO core dumps? ..aside from never causing one :)
I mean, can you compile something into the kernel to prevent core dumps?
I've never found it necessary to examine one in many years, and cannot
foresee ever having to do it.
Thx
Also check out CactiEZ . its a distribution package of sorts that will
load a complete system on a spare box. Basically a quick and dirty for
those not wanting to take all the steps of installing an OS first and
then the packages and plug-ins.
http://cactiusers.org/
Just wondering if anyone else was experiencing the same issues that I
am.. it's related to Samba-3.0.22c and sockets / filehandles.
For some odd reason every couple days (~2 days) I have to restart the
smbd daemon because it eats up 6000+ filehandles, just for sockets I
assume (based on
So - what's the point? I mean updating the port to a newer port with the
same or newer known vulnerabilities?
# portaudit
0 problem(s) in your installed packages found.
# pkg_info| grep firefox
firefox-2.0_2,1 Web browser based on the browser portion of Mozilla
Seems ok to me. Which
On 2006-11-10 12:40, Jim Pazarena [EMAIL PROTECTED] wrote:
is there any way to have NO core dumps? ..aside from never causing one :)
I mean, can you compile something into the kernel to prevent core dumps?
I've never found it necessary to examine one in many years, and cannot
foresee ever
On 2006-11-09 09:13, Tom Grove [EMAIL PROTECTED] wrote:
I just got a new Internet connection through Verizon and need
to be able to use a smarthost to send mail. All servers that I
can use required SMTP auth and I need to figure out a way to
have Sendmail authenticate with the smarthost. Is
On Fri, Nov 10, 2006 at 07:57:09AM +0200, Luke Lamla wrote:
Can you please assist me I am using FreeBSD for my e-mail and internet.
I
want to create e-mail using super user (root) for my employees. What
should
I do or which steps should I follow to do that. I will appreciate your
support
I'm using FreeBSD 6.1 on Intel D945 it works great, nothing to worry,
I had one small bug that you could solve easy, from this link
http://lists.freebsd.org/pipermail/freebsd-i386/2006-January/003620.html
Best Of luck
Marwan Sultan
Sir,
Does FreeBSD 6.1 fully support Intel Desktop Board
On Wed, 2006-11-08 at 11:07 +0100, Tore Lund wrote:
Another reason to use it is monitor calibration.
To add to that, I have a wide screen monitor that runs at 1680x1040 but
the xorg driver will not run at that resolution.
--
Rod
it takes an unusual mind to see the obvious.
- Alfred
On Sun, Nov 05, 2006 at 07:57:03AM -0800, Rem P Roberti wrote:
Would someone point me in the right direction here. I have an old
Compaq Presario 1692 that my sister-in-law gave to me after she
upgraded. I installed FreeBSD 6.1 and everything is working fine.
However, the laptop also came
On Wed, Nov 08, 2006 at 12:56:39PM +0300, Andrew Pantyukhin wrote:
On 11/8/06, Mark Jayson Alvarez [EMAIL PROTECTED] wrote:
Hi,
I have a Palit GeForce 6500 PCI-E 256Mb/64bit and I'm running x windows.
What do I need that NVidia FreeBSD driver for?
3d
It's also useful for getting all of
On Thu, Nov 09, 2006 at 02:46:51PM -0500, Tsu-Fan Cheng wrote:
Hi,
can anyone suggest a TV capture card that works well under
freebsd/6.1/amd64? I read something on the handbook, but would like to have
some input from the real experience...thanks!! a bunch!!
TFC
Aren't ATI's All-in-Wonder
I have a bit of an unusual network setup situation. I have a machine
that is only used to store backups. It gets moved around to
different locations occasionally so it has to be able to live on a
192.168.1.x or a 10.0.1.x network without reconfiguration. I also
need a fixed last address
On 11/10/06, David Schulz [EMAIL PROTECTED] wrote:
it is supposed to be a Huawei EC325 Data Modem, just as on this
website
http://www.huawei.com/mobileweb/en/products/view.do?id=147
On Nov 9, 2006, at 8:22 PM, Joao Barros wrote:
On 11/9/06, David Schulz [EMAIL PROTECTED] wrote:
Hello all,
On Fri, 10 Nov 2006, Damian Wiest wrote:
On Sun, Nov 05, 2006 at 07:57:03AM -0800, Rem P Roberti wrote:
Would someone point me in the right direction here. I have an old
Compaq Presario 1692 that my sister-in-law gave to me after she
upgraded. I installed FreeBSD 6.1 and everything is
Amir Stone wrote:
Hi,
Is there any way to mount our dante account onto OSX with cmd-K? I
find Fugu bothersome.
Thanks,
Amir
1. CC doesn't export any of the NFS directories outside of the dante
cluster (or homer cluster, etc).
2. smb shares are mountable on-campus (keyword), so feel free to
On Fri, Nov 10, 2006 at 08:56:46PM -0500, [EMAIL PROTECTED] wrote:
On Fri, 10 Nov 2006, Damian Wiest wrote:
On Sun, Nov 05, 2006 at 07:57:03AM -0800, Rem P Roberti wrote:
Would someone point me in the right direction here. I have an old
Compaq Presario 1692 that my sister-in-law gave to
Dear All,
Hi, I'm ferry from ISP in Indonesia. I want run my squid and there is
error saying that file libm.so.2 is not found. I suspect that the
library is from ports compat4x, and I try to install that ports from
freebsd ftp server, buat always failed, or can I do another else? I
really need
Garrett Cooper wrote:
Amir Stone wrote:
Hi,
Is there any way to mount our dante account onto OSX with cmd-K? I
find Fugu bothersome.
Thanks,
Amir
1. CC doesn't export any of the NFS directories outside of the dante
cluster (or homer cluster, etc).
2. smb shares are mountable on-campus
On Friday 10 November 2006 19:17, Doug Hardie wrote:
I have a bit of an unusual network setup situation. I have a machine
that is only used to store backups. It gets moved around to
different locations occasionally so it has to be able to live on a
192.168.1.x or a 10.0.1.x network without
On Nov 10, 2006, at 19:34, Jonathan Horne wrote:
On Friday 10 November 2006 19:17, Doug Hardie wrote:
I have a bit of an unusual network setup situation. I have a machine
that is only used to store backups. It gets moved around to
different locations occasionally so it has to be able to
On Friday 10 November 2006 21:56, Doug Hardie wrote:
On Nov 10, 2006, at 19:34, Jonathan Horne wrote:
On Friday 10 November 2006 19:17, Doug Hardie wrote:
I have a bit of an unusual network setup situation. I have a machine
that is only used to store backups. It gets moved around to
On Friday 10 November 2006 21:56, Doug Hardie wrote:
On Nov 10, 2006, at 19:34, Jonathan Horne wrote:
On Friday 10 November 2006 19:17, Doug Hardie wrote:
I have a bit of an unusual network setup situation. I have a machine
that is only used to store backups. It gets moved around to
On Nov 10, 2006, at 20:26, Lane wrote:
On Friday 10 November 2006 21:56, Doug Hardie wrote:
On Nov 10, 2006, at 19:34, Jonathan Horne wrote:
On Friday 10 November 2006 19:17, Doug Hardie wrote:
I have a bit of an unusual network setup situation. I have a
machine
that is only used to
On Fri, Nov 10, 2006 at 09:16:02AM -0800, Chris wrote:
I've posted several questions (under two other ids though the name
Chris)
since March trying to put up a Tyan quad dual s4882. I've run it on 6.0
STABLE as of about March, 6.1 RELEASE in several flavors from May
through September and
On Fri, Nov 10, 2006 at 10:18:59AM +0100, Zbigniew Szalbot wrote:
Dear Kris and others,
On Thu, 9 Nov 2006, Kris Kennaway wrote:
OK, you'll need to do some more diagnosis along the lines of my previous
email then.
Here's my typical load:
last pid: 96934; load averages: 0.03,
Hello,
The 'make install' on the etherape stopped, complaining about a missing
function. The output is included below.
My environment is FreeBSD 6.1 p10 on an Asus motherboard with a Pentium
4 processor.
Given the warnings about a dependancy conflict, and my newbie lack of
knowledge of using
On 10 Nov Damian Wiest wrote:
On Wed, Nov 08, 2006 at 12:56:39PM +0300, Andrew Pantyukhin wrote:
On 11/8/06, Mark Jayson Alvarez [EMAIL PROTECTED] wrote:
Hi,
I have a Palit GeForce 6500 PCI-E 256Mb/64bit and I'm running x
windows. What do I need that NVidia FreeBSD driver for?
Until
First of all the motivation of this is my tftp problem with the address
0.0.0.0. Trying to tftp from the same box doesn't reproduce the
problem, whatever is happening gets cleaned up in the loopback device.
So I want to disable lo0 and route my local IP address over the local
net and
69 matches
Mail list logo
