Hi,
The overhead depends of the quantity of the changes you made since the oldest
snapshot and the current data on the ZFS pool.
The snapshots keep only the differences between the live system and each other,
so if you have made 10GB changes over the last 7 days and your oldest snapshot
is 7
Hi,
If you use HBA/JBOD then you will rely on the software RAID of the ZFS system.
Yes, this RAID is good, but unless you use SSD disks to boost performance and a
lot of RAM the hardware raid should be more reliable and mush faster.
I didn't get if you want to use the system to dual boot
Hi,
If you go with RAID6 setup on your RAID I think you will not need spare so
much, as you will actually have data redundancy distributed over 2 disks.
I think you can use 2 or 3 LUNS, just to have more flexibility in the solution,
but it is not a must :)
For the usage of two copies on pool
I ran into a little problem with my old crontab scripts.
I do the following:
portsnap -I cron update
/usr/local/sbin/portmaster -y --clean-distfiles
/usr/local/sbin/portmaster -aF
pkg version -vIL
After changing to pkg the check for outdated ports fails on the -L flag
pkg version -vIL
Leslie Jensen writes:
pkg version -vIL
pkg: option requires an argument -- L
usage: pkg version [-IPR] [-hoqv] [-l limchar] [-L limchar] [[-X] -s string]
[-r reponame] [-O origin] [index]
pkg version -t version1 version2
pkg version -T pkgname
Clifford Yapp cliffy...@gmail.com writes:
The issue is of some interest because the wiki page documenting
candidates to replace GPL software in base list the OpenBSD copies of
the diff tools: [...]
We already have working BSD-licensed versions of diff and diff3 in the
SoC repo.
DES
--
Tommy Pham tommy...@gmail.com writes:
On Wed, May 15, 2013 at 10:43 AM, Tommy Pham tommy...@gmail.com wrote:
Hi everyone,
I installed 9.1 from DVD with src only and did 'freebsd-update fetch
install'. Then I proceed to compile the lean kernel. I'm unable to
compile a lean (no SCSI, RAID,
On May 18, 2013, at 3:21 AM, Ivailo Tanusheff ivailo.tanush...@skrill.com
wrote:
If you use HBA/JBOD then you will rely on the software RAID of the ZFS
system. Yes, this RAID is good, but unless you use SSD disks to boost
performance and a lot of RAM the hardware raid should be more
On May 18, 2013, at 12:49 AM, kpn...@pobox.com wrote:
On Fri, May 17, 2013 at 08:03:30PM -0400, Paul Kraus wrote:
On May 17, 2013, at 6:24 PM, b...@todoo.biz b...@todoo.biz wrote:
3. Should I avoid using ZFS since my system is not well tuned and It would
be asking for trouble to use ZFS in
On Sat, May 18, 2013 at 7:59 AM, Dag-Erling Smørgrav d...@des.no wrote:
Clifford Yapp cliffy...@gmail.com writes:
The issue is of some interest because the wiki page documenting
candidates to replace GPL software in base list the OpenBSD copies of
the diff tools: [...]
We already have
The software RAID depends not only from the disks, but also from the changes on
the OS, which will occur more frequently than an update of the firmware of the
raid controller. So that makes the hardware raid more stable and reliable.
Also the resources of the hardware raid are exclusively used
1) Given a system running FreeBSD 9.1-RELEASE, is anything bad gonna
happen if I insert a drive into this thing while the system is running?
Assuming your board supports sata hotswap (too lazy to check) it'll be
just fine. I've done this many times with the machine I'm messing with
zfs on.
On 05/18/2013 10:09 AM, Quartz wrote:
However, if the OP wanted to actually truncate $FOO to 51
characters:
NEWFOO=$( echo $FOO | awk -v max=51 '{print substr($0,0,max)}' )
You don't need all that for a simple truncation/substring, you can do it with a
direct assignment:
However, if the OP wanted to actually truncate $FOO to 51
characters:
NEWFOO=$( echo $FOO | awk -v max=51 '{print substr($0,0,max)}' )
You don't need all that for a simple truncation/substring, you can do it
with a direct assignment:
newfoo=${foo:0:51}
The three params here are variable,
Hello list
I cant get to the internet using this netgraph setup script.
I sure would appreciate giving this console log a look over for
errors. My netgraph knowledge level is not sufficient to see what is
wrong. The goal is to run this script to setup and break down a netgraph
network for a
newfoo=${foo:0:51}
That works for bash, not sh.
Ok granted, but I don't think that ${#foo} is straight sh either, so I
assumed things bash/tcsh/ksh/whatever accept when running in sh
emulation were ok.
__
it has a certain smooth-brained appeal
#foo works with sh
On May 18, 2013 10:58:30 AM Quartz qua...@sneakertech.com wrote:
newfoo=${foo:0:51}
That works for bash, not sh.
Ok granted, but I don't think that ${#foo} is straight sh either, so I
assumed things bash/tcsh/ksh/whatever accept when running in sh emulation
were ok.
On Sat, 18 May 2013 11:58:30 -0400, Quartz wrote:
newfoo=${foo:0:51}
That works for bash, not sh.
Ok granted, but I don't think that ${#foo} is straight sh either, so I
assumed things bash/tcsh/ksh/whatever accept when running in sh
emulation were ok.
By default, there is no bash
I have a graphics card that behaves differently under CentOS 6.4 and
FreeBSD 9.1. Specifically, it is an older card (Spapphire with a ATI
chip set) where I have a multi-monitor set up but under CentOS the
monitors come up as expected but under FreeBSD there is some kind of
weird video-line overlap
On Sat, 18 May 2013 10:49:13 -0400
Quartz articulated:
You need the sata ports running in straight up pure ahci mode (as
opposed to IDE mode or compatible or something that emulates old
style parallel-ata). Be aware that Windows up through XP doesn't
support ahci, so if you're dual booting
I have a 4x16=64 core server running FreeBSD 8.4-P but only two of the
CPUs (2x16=32) are enabled. Enabling the other 32 isn't as simple as
changing MAXCPU in param.h (apparently) and recompiling.
What do I need to do to enable the other 32 cores?
Copyright (c) 1992-2013 The FreeBSD Project.
В Sat, 18 May 2013 10:13:08 -0700
Dennis Glatting free...@pki2.com пишет:
I have a 4x16=64 core server running FreeBSD 8.4-P but only two of the
CPUs (2x16=32) are enabled. Enabling the other 32 isn't as simple as
changing MAXCPU in param.h (apparently) and recompiling.
Oops, sorry :)
On Sat, 2013-05-18 at 20:24 +0300, Ivan Klymenko wrote:
В Sat, 18 May 2013 10:13:08 -0700
Dennis Glatting free...@pki2.com пишет:
I have a 4x16=64 core server running FreeBSD 8.4-P but only two of the
CPUs (2x16=32) are enabled. Enabling the other 32 isn't as simple as
changing MAXCPU
В Sat, 18 May 2013 10:13:08 -0700
Dennis Glatting free...@pki2.com пишет:
I have a 4x16=64 core server running FreeBSD 8.4-P but only two of the
CPUs (2x16=32) are enabled. Enabling the other 32 isn't as simple as
changing MAXCPU in param.h (apparently) and recompiling.
What do I need to
In message 519794e9.6080...@sneakertech.com,
Quartz qua...@sneakertech.com wrote:
3) Assuming that I want to do this stuff, what BIOS options should I
be setting or unsetting on the motherboard?
You need the sata ports running in straight up pure ahci mode (as
opposed to IDE mode or
You need the sata ports running in straight up pure ahci mode (as
opposed to IDE mode or compatible or something that emulates old
style parallel-ata).
OK. Thanks Quartz,. I'll make it a point to check for that.
The wording on different bios' can often be confusing. I've seen ahci
mode
Sorry for top-post, but just wanted to add a quick note:
The output of ngctl dot would be very helpful to others in debugging your
setup.
--
Devin
On May 18, 2013, at 8:38 AM, Joe wrote:
Hello list
I cant get to the internet using this netgraph setup script.
I sure would appreciate
Be aware that Windows up through XP doesn't
support ahci,
There is a huge amount of information via a quick Google search that
would seem to contradict your statements regarding WinXP and AHCI.
Sorry, poor choice of wording. I meant earlier versions of Windows don't
support achi
On May 18, 2013, at 9:06 AM, Polytropon wrote:
On Sat, 18 May 2013 11:58:30 -0400, Quartz wrote:
newfoo=${foo:0:51}
That works for bash, not sh.
Ok granted, but I don't think that ${#foo} is straight sh either, so I
assumed things bash/tcsh/ksh/whatever accept when running in sh
#foo works with sh
Is it actually part of the official spec though is what I'm wondering,
or is it a case of other shells not rejecting 'advanced' statements when
running in emulation.
At least FreeBSD's implementation of sh (which is ash, I think)
supports the # functionality.
The
Hi:
How can I prevent the start of network on fwe0 and fwip0?
fwe0: Ethernet over FireWire
fwip0: IP over FireWire
In /etc/rc.conf I added this line
network_interfaces=lo0 fxp0 wpi0
But I still see that FreeBSD start fwe0 and fwip0
Starting Network: lo0 fxp0 wpi0
Starting Network: fwe0
By default, there is no bash on FreeBSD,
Right right... I know this, but forgot what list I was on :)
It doesn't help that I always install bash first thing on any freebsd
box or it get's installed automatically as part of pc-bsd anyway.
__
it has a
On May 18, 2013, at 4:54 PM, Quartz wrote:
#foo works with sh
Is it actually part of the official spec though is what I'm wondering, or is
it a case of other shells not rejecting 'advanced' statements when running in
emulation.
Shells don't have an emulation mode. The shell supports
On May 18, 2013, at 5:06 PM, Teske, Devin wrote:
On May 18, 2013, at 4:54 PM, Quartz wrote:
#foo works with sh
Is it actually part of the official spec though is what I'm wondering, or is
it a case of other shells not rejecting 'advanced' statements when running
in emulation.
Teske, Devin wrote:
Sorry for top-post, but just wanted to add a quick note:
The output of ngctl dot would be very helpful to others in debugging your
setup.
graph netgraph {
edge [ weight = 1.0 ];
node [ shape = record, fontsize = 12 ] {
1 [ label =
On Fri, 17 May 2013 09:15:35 -0400
Jerry wrote:
On Fri, 17 May 2013 14:03:01 +0100
RW articulated:
On Fri, 17 May 2013 08:45:29 -0400
Jerry wrote:
On Fri, 17 May 2013 13:19:32 +0100
RW articulated:
On Fri, 17 May 2013 12:54:29 +0100
Bruce Cran wrote:
Yes,
On May 18, 2013, at 5:51 PM, Joe wrote:
Teske, Devin wrote:
Sorry for top-post, but just wanted to add a quick note:
The output of ngctl dot would be very helpful to others in debugging your
setup.
graph netgraph {
edge [ weight = 1.0 ];
node [ shape = record, fontsize = 12 ] {
1 [ label =
37 matches
Mail list logo
