to step up
and provide servers to collect this data. I do think it would be better
as an official project data collection rather than a third party service.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.or
.9.9 (Quad9). You can read
> about it at:
> https://arstechnica.com/information-technology/2017/11/new-quad9-dns-service-blocks-malicious-domains-for-everyone/
There is also 1.1.1.1 and 1.0.0.1 from cloudflare - claims to be fastest
https://1.1.1.1
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
since 10.1, I now see arc being released instead of swap being used.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
r than (kmem_size - max_wired - padding)
--
FreeBSD - the place to B...Storing Data
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
ed: 5210M ARC: 4.1G Free:2.2G
--
Shane Ambler
Shane (at) ShaneWare (dot) Biz
http://ShaneWare.Biz
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
= 0x80086de6a, rsp =
0x7fffe048, rbp = 0x7fffe990 ---
KDB: enter: panic
Uptime: 9m25s
Dumping 1053 out of 16295
MB:..2%..11%..22%..31%..41%..51%..61%..72%..81%..92%
--
FreeBSD - the place to B...Spinning Destruction ;)
Shane Ambler
___
freebsd
fter the system upgrade,
installing misc/compat9x should resolve the issues until you get your
ports updated.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/l
for the Realtek RTL8192EU chipset.
https://svnweb.freebsd.org/base?view=revision=312680
At this stage the support is in current but doesn't appear to have been
merged into any releases.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
f
rs ago there was a deadlock issue
when renaming a zvol, unless the fix got undone recently this may just
be a distraction or a hint of a solution...
https://svnweb.freebsd.org/base?view=revision=272474
--
FreeBSD - the place to B...Storing Data
Shane
you get.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
at the installkernel stage.
--
FreeBSD - the place to B...Storing Data
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
s/clang380-import/
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
On 19/02/2016 15:36, Shane Ambler wrote:
On 18/02/2016 10:54, Marius Strobl wrote:
Could those of you experiencing these hangs with ZFS please test
whether instead of reverting all of r292895, a kernel built with
just the merge of r291244 undone via the following patch gets
rid of that problem
?
https://people.freebsd.org/~marius/r291244_reversal_10.diff
Marius
I have built 10-STABLE - r295756 with the patch applied.
corei7 - 8GB - 3 disks in raidz
The first 11 hours look promising.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
On 04/02/2016 05:33, Peter Jeremy wrote:
On 2016-Feb-03 18:23:13 +1030, Shane Ambler <free...@shaneware.biz> wrote:
Any chance you get high wired allocations?
A high wired allocation is normal for ZFS - ARC shows up as "wired"
memory.
Sometimes several times in a day I see
I can get in
early enough.
Not sure how to gather any helpful info for this.
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscr
with 8GB I get
vfs.zfs.arc_free_target: 14091
vm.v_free_target: 43195
Doesn't that cause arc allocation to trigger swapping leaving space
for arc allocation
--
FreeBSD - the place to B...Storing Data
Shane Ambler
___
freebsd-stable@freebsd.org
On 17/06/2015 17:22, Hans Petter Selasky wrote:
On 06/17/15 09:24, Shane Ambler wrote:
On 24/03/2015 01:55, Shane Ambler wrote:
On 25/12/2014 23:03, Andriy Gapon wrote:
On 25/12/2014 11:29, Hans Petter Selasky wrote:
The cam_sim_free() is stuck, blocking the rest of that controller from
On 24/03/2015 01:55, Shane Ambler wrote:
On 25/12/2014 23:03, Andriy Gapon wrote:
On 25/12/2014 11:29, Hans Petter Selasky wrote:
The cam_sim_free() is stuck, blocking the rest of that controller from
enumerating. It might look like a non-USB stack issue.
MAV: Do you have some ideas where
= 0x7fffe7d0 ---
Mar 24 00:24:25 leader kernel: Uptime: 12m42s
--
FreeBSD - the place to B...Software Developing
Shane Ambler
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe
This is a regression between alpha2 and alpha4. I first setup a disk to
boot 10 just after alpha2 was tagged. A few days ago I updated to
alpha4 and started getting timeout messages, I have just built alpha5
r256098 and still get them.
I just had 10 running for a few hours and 3 of the messages
On 03/10/2013 17:14, Thomas Mueller wrote:
I failed with make buildworld on 9.2, building from a 9.2
prerelease.
svn revision on system to be built was 255986.
uname -a shows
FreeBSD amelia2 9.2-PRERELEASE FreeBSD 9.2-PRERELEASE #17 r254196:
Sun Aug 11 00:36:49 UTC 2013
After booting from a 10-alpha2 disk I am seeing lock order reversal
messages show up from time to time. Current logs have 35 entries.
The machine normally is running 9.1 from zfs root and I have setup a
separate disk (eSATA case connected through backplane port to onboard
SATA port) that I
I have setup a few machines in the past from CD installer and my current
machine started with CD install and was then updated from source.
Currently my machine runs 9.1-RELEASE-p3
Yesterday I started to setup a clean 10.0 install onto a new drive that
I can boot from to test ports building with,
On 20/09/2013 19:39, Bryan Drewery wrote:
On Fri, Sep 20, 2013 at 03:38:17PM +0930, Shane Ambler wrote:
When using mergemaster with -a I get the following error
*** Creating the temporary root environment in /var/tmp/temproot
*** /var/tmp/temproot ready for use
*** Creating
On 09/09/2013 21:20, J David wrote:
On Sun, Sep 8, 2013 at 11:11 PM, Darren Pilgrim
list_free...@bluerosetech.com wrote:
You can use zfs.root.mountfrom=zfs:data/root in /boot/loader.conf
instead of an fstab entry.
That has been in loader.conf the whole time.
Mountpoint=legacy is required
On 30/08/2013 06:39, Paul Chakravarti wrote:
I am running FreeBSD 9.1-RELEASE-p6 and am getting multiple random
reboots daily (sometimes hours apart, sometimes minutes).
I suspect that it might be a hardware issue however have tried
extended runs (upto 8 hours) of 'cpuburn' and 'stress' from
On 21/08/2013 23:39, Trond Endrestøl wrote:
On Wed, 21 Aug 2013 13:02-, Zenny wrote:
Where can I find a list of properties (-o/-O property=value) for
creating a zpool?
Read zpool(8) for zpool properties, and zfs(8) for zfs properties.
Always a good place for detailed explanations.
On 31/07/2013 01:31, Daniel Kalchev wrote:
But here is an idea: Remove BIND from HEAD overnight and see how many
will complain ;-) If nobody complains, don't put it back in.
Or change the default to off. If you want bind add WITH_BIND=yes to src.conf
It's hard to say FreeBSD is a safe and
On 31/07/2013 15:44, Chris H wrote:
Greetings,
I know this sounds crazy, and apologies if I am. But I have 2 RELENG_8
servers;
1 amd64, and 1 i386. about 3 wks ago, I migrated from cv(sup) updating, to svn
on
the amd64 box.
After removing cv(sup) related folders, and the ports folder, I
On 01/08/2013 00:28, Chris H wrote:
In the first instance, /usr/ports was removed (before initiating portsnap). But
before
the second attempt, I performed a mkdir /usr/ports. But in the end, the results
were
the same;
portsnap fetch fetched the image, verified the image,
extracted to
On 01/08/2013 01:42, J David wrote:
=34 1953525101 da2 GPT (931G)
34 222 - free - (111k)
256 19535084951 freebsd-zfs (931G)
1953508751 163849 !6a945a3b-1dd2-11b2-99a6-080020736631 (8.0M)
da3 - da7 are identical to da2.
So
On 22/07/2013 19:54, Stefan Esser wrote:
Am 22.07.2013 10:04, schrieb Eugene M. Zheganin:
Hi.
I will make a zpool on a zvol encrypted by geli.
I have configured a system in just that way, a few weeks ago.
It seems to work just fine.
It sounds like a fix may exist in head but if you want
On 09/05/2013 22:48, Benjamin Adams wrote:
Hello zfs question about memory.
I heard zfs is very ram hungry.
Service looking to run:
- nginx
- postgres
- php-fpm
- python
I have a machine with two quad core cpus but only 4 G Memory
I'm looking to buy more ram now.
What would be the recommend
While looking into an issue with security/heimdal I found that v1.5.2 of
heimdal has been in HEAD for 11 months and has had 2 small fixes in that
time. Now that I look at it these two fixes should probably be
duplicated to the port as well.
This update has yet to be copied down to stable or
On 23/02/2013 01:32, Zhihao Yuan wrote:
I my case, the sound card just do not work, though the device
and the driver are working.
Suggestions wanted. Thanks.
I have a Realtek ALC887 on my machine. I first installed 9.0rc3 and had
sound issues. I found the default sound driver didn't work
I have two WD's a 1TB and a 2TB. Upgraded to 9.1 three days ago and
don't think it is any worse than 9.0. I find things slow down if two
things are trying to access the drive at the same time and when I do get
some swapping it gets unbearable. One thing that always annoyed me was
the security
On 13/02/2013 12:52, Dmitry Marakasov wrote:
afaik, in prior discussion some years ago an issue was mentioned that
some ports don't build with stack-protector, so I suggested to introduce
STACK_PROTECTOR_SAFE/_UNSAFE knobs similar to what we have for
MAKE_JOBS_SAFE_/_UNSAFE (we might actually
On 02/11/2012 15:57, Doug Hardie wrote:
On 1 November 2012, at 19:14, Brett Glass wrote:
I need to build up a few servers and routers, and am wondering how
FreeBSD 9.1 is shaping up. Will it be likely to be more stable and
robust than 9.0-RELEASE?
It appears to be for me. I had problems
On 30/10/2012 19:27, Andriy Gapon wrote:
on 30/10/2012 03:33 Steven Nikkel said the following:
I'm running a long duration CPU-centric process that will gobble up all
available CPU time. I have it set to run at nice +20. While it's running I've
noticed other processes have a hard time getting
On 05/10/2012 01:37, Zoran Kolic wrote:
After years of using nvidia 6200 with nv, I had to move to above
mentioned gt520. Fast search shoes I nvidia-driver. Correct? And to
change nv in conf file to nvidia with nvidia_load=YES in
rc.conf? I wait to install the card till release comes out. Best
On 18/04/2012 17:29, Zenny wrote:
Hi:
I am having problem while trying to compile HipHop similar to what has
been discussed here
(https://github.com/facebook/hiphop-php/issues/480#pull_comment_form)
/root/hhbuild/hiphop-php/src/runtime/base/preg.cpp:138: error:
'pcre_info' was not declared
On 26/03/2012 02:19, C. P. Ghost wrote:
On Sun, Mar 25, 2012 at 6:46 PM, Prabhpal S. Mavi
prabh...@digital-infotech.net wrote:
Greetings Friends,
have anyone has come across this warning / error? This occurs when i ssh
to my FreeBSD 9.0 System. any help would be greatly appreciated.
Warning:
On 21/03/2012 08:23, Matt Burke wrote:
Under 9.0-RELEASE I'm having trouble figuring out how to light up the drive
identification/fault lights on my enclosure (SAS disks on Chenbro
80H10321513C0 backplanes attached to Areca ARC-1320 HBAs)
# setobjstat /dev/ses0 0xb 0x80 0x00 0x02 0x00
light
9-STABLE-i386-clang
9-STABLE-i386-gcc
10-CURRENT-amd64-clang
10-CURRENT-amd64-gcc
10-CURRENT-i386-clang
10-CURRENT-i386-gcc
--
Shane Ambler
FreeBSD (at) ShaneWare (dot) Biz
http://ShaneWare.Biz
___
freebsd-stable@freebsd.org mailing list
http
45 matches
Mail list logo
