---Mike
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994www.sentex.net
Cambridge, Ontario
At 01:41 PM 5/5/2009, Mike Tancsa wrote:
Has anyone had any luck getting this modem to work under FreeBSD ? I
have been trying to modify the driver to get it to recognize and
send the unit into modem mode, but no luck. I even tried setting the
unit into permanent modem mode first from Windows
At 03:48 AM 5/7/2009, Nick Hibma wrote:
> u3g0: 2.00/0.00, addr 2> on uhub1
> u3g0: changing CMOTECH modem to modem mode
> u3g0: sent command to change to modem mode
> u3g0: failed to read back CSW: 13
> u3g0: at uhub1 port 2 (addr 2) disconnected
> u3g0: detached
> ucom0: 2.00/0.00, addr 2> on
At 10:01 AM 5/7/2009, Mike Tancsa wrote:
This is the real port. Could you dump the descriptors after unloading the
driver and loading ugen?
I decided to give it a spin on HEAD, but not sure if the recent
changes to u3g in HEAD changed the behaviour, or its an issue with me
fiddling with
ULL (12Mbps) pwr=ON
ugen0.3: at usbus0,
cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen2.2: at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
0(freebsd-current2)#
---Mike
--------
Mike Tancsa,
ble lqr
disable echo
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR# Add a (sticky) default route
disable dns
---Mike
Mike Tancsa,
mail to "freebsd-usb-unsubscr...@freebsd.org"
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994
>Date-Required:
>Class: update
>Submitter-Id: current-users
>Arrival-Date: Mon Aug 24 13:30:04 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: mike tancsa
>Release:RELENG_7
>Organization:
sentex communications
>Environment:
7.2-STABLE
there anything in the
above patch set that might address it ?
---Mike
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Tue Aug 25 15:20:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: mike tancsa
>Release:7.x
>Organization:
sentex communications
>Environment:
7.2-STABLE #0
= 0x0030 <12345>
bNumConfigurations = 0x0001
0(ich10)#
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet
The following reply was made to PR usb/138172; it has been noted by GNATS.
From: Mike Tancsa
To: bug-follo...@freebsd.org, m...@sentex.ca
Cc:
Subject: Re: usb/138172: Additional dev id for u3g (Option mini PCIe)
Date: Tue, 01 Sep 2009 10:52:00 -0400
Here is an additional device ID for an
At 11:55 AM 9/1/2009, Hans Petter Selasky wrote:
On Tuesday 01 September 2009 17:40:07 Mike Tancsa wrote:
>
Does your patch apply to 8+9-current ?
Here are the diffs for 8+9-current
I tested the Option mini-pci-express units. I dont have the novatel
handy right now, but it should w
At 04:48 PM 9/1/2009, Hans Petter Selasky wrote:
On Tuesday 01 September 2009 22:40:25 Mike Tancsa wrote:
> usb/138172
Here is the commit:
http://perforce.freebsd.org/chv.cgi?CH=168061
Thanks! Any chance it will hit the 2 trees ? (the RELENG_7 version)
as well as whats in perforce
MCAP/MSM6280/SRC 2007/12/12 11:49:21
IMEI:
IMEI SV: 10
FSN:
3GPP Release 5
+GCAP: +CGSM,+DS,+ES
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,
At 03:05 AM 9/5/2009, Hans Petter Selasky wrote:
On Friday 04 September 2009 21:21:41 Mike Tancsa wrote:
> Not sure if this is a faulty device or just a quirk as to how it
> works. But on cold boot (after a power cycle) it does not work. But
> if I do a soft reboot, it attaches n
At 01:09 PM 9/25/2009, Hans Petter Selasky wrote:
Hi,
At EuroBSDcon 2009 I was requested to add support for polling mode to the USB
serial port adapters alike UKBD and UMASS.
Which USB serial port adapters should have this support at first? And I also
need someone to volunteers testing this!
modem to
modem mode\n");
+ u3gstub_BBB_cmd(sc, gtm3782005stor_cmd);
+ break;
case U3GINIT_CMOTECH:
if (bootverbose || u3gdebug)
device_printf(sc->sc_dev,
---
At 10:28 AM 10/2/2009, Mike Tancsa wrote:
I am having problems getting the later Option GTM378, 380 and 382 3g
modems to work properly with the u3g driver on FreeBSD. Older
generation 378s work just fine, but I can crazy slow speeds when
using the newer ones. (21kbps vs about 1.5Mb based on
any mail to "freebsd-usb-unsubscr...@freebsd.org"
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet
0; +CTZR: 0;
+CLIP: 0; +COLP: 1; +CLIR: 0; +CCLK:; +COPS: 0,0,"",3; +CSIM: 14,"";
+CRSM: 0,0,0,0,0,""; +CSMINS: 0; +VIP: 0; +VTS: ; +VTD: 1
---Mike
Also check for any stall printouts (not likely) when setting u3g debugging.
--HPS
re spam.
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
---
:
FreeBSD eeepc.ewinter.org 9.0-CURRENT FreeBSD 9.0-CURRENT #5: Mon Nov
16 07:57:28 CET 2009
ewin...@eeepc.ewinter.org:/usr/obj/usr/src/sys/eeepc i386
RELENG_8 and above should be the same for this.
---Mike
Mike Tancsa
bDescriptorType = 0x24
--HPS
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
-
usb
0.003 apcupsd: generic-usb.c:403 Found 0 USB busses
0.007 apcupsd: generic-usb.c:405 Found 0 USB devices
0.007 apcupsd: generic-usb.c:416 /dev/usb:/dev/ugen1.2 - 051d:0002
0.007 apcupsd: generic-usb.c:419 Trying device /dev/usb:/dev/ugen1.2
0.153 apcupsd: hidutils.c:62
At 03:56 PM 5/6/2010, Hans Petter Selasky wrote:
>
Have you tried FreeBSD 8-STABLE ?
Hi,
This is with RELENG_8 as of this morning.
---Mike
--HPS
----
Mike Tancsa, tel
!
http://kroptech.com/mailimport/showmsg.php?msg_id=3665255961&db_name=apcupsd-users
I've made a small patch, but it won't fix your issue :-(
http://p4web.freebsd.org/@@177865?ac=10
--HPS
----
Mike Tancsa,
cks ? not sure
usbconfig -d 6.2 reset
or
usbconfig -d 6.2 power_off
usbconfig -d 6.2 power_on
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communicati
he load unfortunately.
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994
ds,
Weongyo Jeong
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994www.sentex.net
Cambridge, Ont
Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Wed Jan 19 00:40:07 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator: mike tancsa
>Release:RELENG_8 Jan 17 2011
>Organization:
Sentex
>Environment:
8.2-PRERELEASE F
ding a ping with some debugging attached
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
f
On 4/26/2011 6:04 AM, Hans Petter Selasky wrote:
> On Tuesday 26 April 2011 08:56:34 Hans Petter Selasky wrote:
>> On Tuesday 26 April 2011 03:41:39 Mike Tancsa wrote:
>>> Hi,
>>>
>>> I have run into a problem where ucom no longer works with a recent
>&g
usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen1.9: at
usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen1.10: at
usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet
On 5/10/2011 12:32 PM, Mike Tancsa wrote:
> I am trying to monitor a boat load of UPSes off a soekris 5501 (same error on
> an Alix box) and a pair of USB hubs. It seems I can only have one USB hub
> plug in at a time. If I plug just one in, all is ok. But if two are plugged
>
0x09 0x 0x0001 0
REQUEST =
0[upsmon1]#
It seems to quiet things down. What does the command do ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario C
901 devclass=0xff
devsubclass=0xff sernum="Serial Number" release=0x intclass=0xff
intsubclass=0xff ttyname=U1 ttyports=3
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.s
28.6 on pci0
pci2: on pcib2
xhci0: mem 0xfe50-0xfe501fff irq
18 at device 0.0 on pci2
xhci0: [ITHREAD]
xhci0: 32 byte context size.
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge
1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1
ecap 0018[150] = unknown 1
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sent
! (USB_ERR_TIMEOUT,
ignored)
I have also tried post reset
# usbconfig -d 1.3 set_config 255
# usbconfig -d 1.3 set_config 0
usbconfig: could not set config index: Input/output error
#
This is RELENG_8 on an alix box from July 14th.
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex
l
Any other tricks you can think of to reset the device short of
installing a HUB at each location ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario C
e of remote
sites for me...
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-usb@
unknown oid 'hw.usb.no_cs_fail'
>> $ uname -v
>> FreeBSD 8.2-STABLE #4: Sun Jun 26 15:10:04 CEST 2011
>> r...@ghost.pnet.one.pl:/home/obj/usr/src/sys/SERWER_DDB
>
> You need the kernel from the latest 8-stable.
How do you power cycle just one port ?
---
t shut power to the device. However, I
have found a dlink hub that works as expected.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Cana
idVendor = 0x0572
idProduct = 0x1329
bcdDevice = 0x0100
iManufacturer = 0x0001
iProduct = 0x0002
iSerialNumber = 0x0003 <24680246>
bNumConfigurations = 0x0002
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing In
At 11:41 PM 12/21/2007, Mikhail Teterin wrote:
Another attempt to use USB-storage with FreeBSD, another moment of
hair-pulling frustration.
I attach the card-reader with the media card already inserted (detection of
card-insertion has not worked in a long time, if ever).
Perhaps its the one ca
At 07:31 AM 12/31/2007, Mario Sergio Fujikawa Ferreira wrote:
Hi,
I wrote a simple port of the NetBSD ugensa(4) driver: USB generic
serial adapter
http://www.daemon-systems.org/man/ugensa.4.html
I would like for you to review the "ported" kernel module. The
file can be found at
Hi,
At 07:31 AM 12/31/2007, Mario Sergio Fujikawa Ferreira wrote:
Hi,
I wrote a simple port of the NetBSD ugensa(4) driver: USB generic
serial adapter
http://www.daemon-systems.org/man/ugensa.4.html
I would like for you to review the "ported" kernel module. The
file can be found at
Hi,
At 11:11 AM 12/31/2007, Mike Tancsa wrote:
At 07:31 AM 12/31/2007, Mario Sergio Fujikawa Ferreira wrote:
Hi,
I wrote a simple port of the NetBSD ugensa(4) driver: USB
generic serial adapter
http://www.daemon-systems.org/man/ugensa.4.html
I would like for you to review the "p
Hi,
Sorry it took so long to test again. This version now works
for me with the appropriate device IDs manually added. If you commit
this driver to the tree (it would be great if it were) could you also
add the Sierra Wireless 875 ?
ugensa0: 1.10/0.01, addr 2> on uhub0
ugensa_attac
At 03:25 PM 1/10/2008, Mike Tancsa wrote:
Hi,
Sorry it took so long to test again. This version now
works for me with the appropriate device IDs manually added. If you
commit this driver to the tree (it would be great if it were) could
you also add the Sierra Wireless 875
I need to outfit some boxes with a USB ethernet adaptor. They will
be running RELENG_7 and speed is not important (10/100 is fine), but
reliability is. Does anyone have any recommendations ?
---Mike
Mike Tancsa
At 02:33 PM 12/3/2008, Gabor wrote:
everything works fine. When we try to use a USB to serial
converter(type doesn't matter, UFTDI or Prolific) we run into
problems. The first time we start up our side, everything
works. The second time we don't get carrier(DCD). The other side
is always ru
At 05:20 PM 12/4/2008, Hans Petter Selasky wrote:
On Thursday 04 December 2008, Gabor wrote:
> Some more twists to this. As I said if I kill off our program and restart
> it, it never sees carrier unless the module was reloaded. However, if I
> unplug the serial cable from the Windows box and re
At 05:37 PM 12/4/2008, Mike Tancsa wrote:
At 05:20 PM 12/4/2008, Hans Petter Selasky wrote:
On Thursday 04 December 2008, Gabor wrote:
> Some more twists to this. As I said if I kill off our program and restart
> it, it never sees carrier unless the module was reloaded. However, if I
&g
device_printf(ucom->sc_dev, "Setting buffers
to default of %d\n",UFTDIIBUFSIZE);
+
+ }
ucom->sc_opkthdrlen = sc->sc_hdrlen;
---Mike
Mike Tancsa
hing I need to add to the kernel ? I am using the USB2
kernel definition on AMD64
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sent
At 04:26 PM 2/6/2009, Mike Tancsa wrote:
I was going to try out some of our apps on HEAD with USB2 kernel.
dmesg shows
ugen0.3: at usbus0
however, there is no ugen device ?
0[freebsd-current2]# ls -l /dev/u*
lrwxr-xr-x 1 root wheel6 Feb 6 15:34 /dev/urandom -> ran
At 04:36 AM 2/7/2009, Hans Petter Selasky wrote:
Hi Mike,
The ugen devices are invisible and dynamically created.
Try open /dev/ugen0.2.0.0 (control endpoint)
Also you need to re-link your application with "dev/usb2/include/usb2_ioctl.h"
Format is /dev/ugen...
I recommend using libusb20 to a
At 05:36 PM 2/26/2009, Kim Culhan wrote:
u3g0: on usbus2
u3g0: Found 4 ports.
umass0: on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x
umass0:1:0:-1: Attached to scbus1
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
ke[2]: Leaving directory `/usr/ports/security/openct/work/openct-0.6.15/src'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/security/openct/work/openct-0.6.15'
gmake: *** [all] Error 2
*** Error code 2
Stop in /usr/ports/security/openct.
*** Error code
At 05:40 PM 3/18/2009, Andrew Thompson wrote:
On Wed, Mar 18, 2009 at 04:15:46PM -0400, Mike Tancsa wrote:
> Hi,
> I was trying to see if OpenCT and OpenSC work under the new USB
> regime, but openCT doesnt compile now. Are there any tricks to get it to
> compile and or w
At 08:30 PM 3/18/2009, Andrew Thompson wrote:
On Wed, Mar 18, 2009 at 08:04:48PM -0400, Mike Tancsa wrote:
> At 05:40 PM 3/18/2009, Andrew Thompson wrote:
>> On Wed, Mar 18, 2009 at 04:15:46PM -0400, Mike Tancsa wrote:
>> > Hi,
>> > I was trying to see if OpenC
At 06:24 PM 3/20/2009, Andrew Thompson wrote:
On Wed, Mar 18, 2009 at 08:04:48PM -0400, Mike Tancsa wrote:
> At 05:40 PM 3/18/2009, Andrew Thompson wrote:
>> On Wed, Mar 18, 2009 at 04:15:46PM -0400, Mike Tancsa wrote:
>> > Hi,
>> > I was trying to see if OpenC
reebsd-current2]# cu -l /dev/cuaU0.0
Connected
ati
Manufacturer: Novatel Wireless Incorporated
Model: Ovation MC950D Card
Revision: 3.15.02.0-00 [2008-03-04 09:19:50]
IMEI: 356846015465400
+GCAP: +CGSM,+DS,+ES
OK
----
At 05:50 AM 4/1/2009, Nick Hibma wrote:
Mike, and others,
We are working on this panic at the moment and there will be a driver out
for inclusion in 7.2 (hopefully).
It seems to (almost) make ZTE MF626 work as well (mode switch does not work
reliably yet). According to Mike Tancsa this driver
usb' found
configure:23131: result: no
configure:23133: error: Cannot detect libusb
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994
At 04:38 PM 4/9/2009, Mike Tancsa wrote:
Hi,
While trying to build openct on a new box, I got the
following errors. I was able to build this just a few weeks ago,
but all of a sudden configure cant find libusb ?
Just to followup on my own post, I was able to compile and get it to
At 08:49 AM 5/6/2008, David Imhoff wrote:
Hi,
I'm trying to get an Alladin eToken pro (4.2b) and a Kobil mIdentity
light smartcard token/reader to work with OpenCT under FreeBSD, but i
ran into some problems. Both devices work perfectly when connected
through an USB 2.0 hub to the machine, but w
sb.ucom.cons_subunit: 0
hw.usb.ucom.cons_unit: 0
hw.usb.ucom.debug: 0
hw.usb.uhid.debug: 0
hw.usb.ukbd.no_leds: 0
hw.usb.ukbd.debug: 0
hw.usb.ums.debug: 0
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet
Required:
>Class: update
>Submitter-Id: current-users
>Arrival-Date: Tue Feb 14 21:20:07 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator: mike tancsa
>Release:RELENG_8
>Organization:
Sentex Communications
>Environment:
8.2-STABLE FreeBSD 8.2-ST
c 2012-02-14 15:13:52.0 -0500
@@ -432,6 +432,7 @@
U3G_DEV(QUANTA, Q111, 0),
U3G_DEV(SIERRA, AC402, 0),
U3G_DEV(SIERRA, AC595U, 0),
+ U3G_DEV(SIERRA, AC313U, 0),
U3G_DEV(SIERRA, AC597E, 0),
U3G_DEV(SIERRA, AC875E, 0),
U3G_DEV(SIERRA, AC875U,
devsubclass=0x00 sernum="002" release=0x0200 mode=host intclass=0x02
intsubclass=0x02 intprotocol=0x01 ttyname=U0 ttyports=1
dev.umodem.0.%parent: uhub1
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing I
On 2/29/2012 12:19 PM, re...@freebsd.org wrote:
> Synopsis: USB patch for new u3g device
>
> State-Changed-From-To: open->patched
> State-Changed-By: remko
> State-Changed-When: Wed Feb 29 17:18:56 UTC 2012
> State-Changed-Why:
> This had been patched to -HEAD and stable/9, set the
> state to pat
2012-11-02 11:14:58 -0400
SELFTEST : NO
STATFLAG : 0x0708 Status Flag
SERIALNO : 8B0736R21792
BATTDATE : 2007-09-07
NOMINV : 120 Volts
NOMBATTV : 24.0 Volts
NOMPOWER : 865 Watts
FIRMWARE : 8.g9a.D USB FW:g9a
END APC : 2012-11-02 14:07:32 -0400
0(backup3)#
---Mike
--
---
0.000MB/s transfers
0(cage)#
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-usb@fre
hw.usb.ulpt.debug: 0
hw.usb.uplcom.debug: 0
hw.usb.uslcom.debug: 0
hw.usb.uvisor.debug: 0
hw.usb.uvscom.debug: 0
hw.usb.ucom.cons_baud: 9600
hw.usb.ucom.cons_subunit: 0
hw.usb.ucom.cons_unit: -1
hw.usb.ucom.debug: 0
hw.usb.uhid.debug: 0
hw.usb.ukbd.no_leds: 0
hw.usb.ukbd.debug: 0
hw.usb.ums.debug: 0
On 12/11/2012 6:49 AM, Hans Petter Selasky wrote:
> On Tuesday 11 December 2012 12:34:11 Mike Tancsa wrote:
>> hw.usb.timings.extra_power_up_time: 20
>> hw.usb.timings.resume_recovery: 50
>> hw.usb.timings.resume_wait: 50
>> hw.usb.timings.resume_delay: 250
>> hw.u
* 244103 sys/kern/vfs_mountroot.c
* 244103 sys/kern/vfs_bio.c
* 244103 sys/kern/vfs_mount.c
* 244103 sys/dev/uart/uart_bus_pci.c
* 244103 sys/dev/isci/isci_io_request.c
* 244103 sys/dev
* 244103 sys
Status against revision
sbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen0.1: at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
--
-------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http:/
to give up control
usbus1: timed out waiting for BIOS
xhci0: 32 byte context size.
usbus1 on xhci0
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, On
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
Base Board Information
Manufacturer: Intel Corporation
Product Name: DH61BE
enable or disable or
legacy mode or not. I will try disabling legacy mode and see what
happens. I did upgrade it to the latest version of the BIOS as well.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet service
s = 0x
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-usb@freebsd.o
3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada
always probes as USB3 speed! When its disabled, at
boot time it probes as USB2 speeds until I disconnect / reconnect.
Thanks!
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
: 0x0508
SERIALNO : 4B1630P12329
BATTDATE : 2016-07-27
NOMINV : 120 Volts
NOMBATTV : 12.0 Volts
NOMPOWER : 360 Watts
FIRMWARE : 929.a5 .D USB FW:a5
END APC : 2017-01-24 09:29:44 -0500
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing
On 1/24/2017 12:03 PM, Hans Petter Selasky wrote:
> On 01/24/17 16:14, Mike Tancsa wrote:
>> Perhaps some sort of USB quirk needs to be added ? Any ideas on how to
>> get things working ? It fails on RELENG8, RELENG_10, and RELENG_11 in
>> the same way. usbconfig dump_device_
On 2/8/2017 12:33 PM, Hans Petter Selasky wrote:
> On 01/24/17 18:12, Mike Tancsa wrote:
>> The daemon does attach to it, and it sort of reads some of the info (as
>> before adding the quirk)
>
> Hi,
>
> Does this device work with apcaccess under Linux?
>
&
On 2/8/2017 12:55 PM, Hans Petter Selasky wrote:
> On 02/08/17 18:38, Mike Tancsa wrote:
>> Hi,
>> It works without issue on Linux.
>> What information from usbdump would be helpful from usbdump ?
>
> Hi,
>
> If there are any transaction errors, like non succ
anufacturer should be let aware of this issue. It's like a
> zero-day to stop the device from working properly.
I can try. I dont have any contacts there, but I will bcc' one of the
developers of apcupsd to see what he thinks. I attached the output of
truss and the usbdump to see
On 2/8/2017 3:09 PM, Hans Petter Selasky wrote:
>
> You can also try connecting the device w/ or w/o a USB HUB.
I tried with a HUB, but it does not make a difference.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Pro
6
iManufacturer = 0x0003
iProduct = 0x0001
iSerialNumber = 0x0002 <4B1640P41654 >
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
__
aded) does the USB device behave as expected on its
normal external ports ? I had to do this on an older version of the
board to work around some timing issues.
---Mike
--
-------
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet s
l make it fail. Any idea what it might be or how I
can tweak it to it more reliably initializes ? I first start to notice
it when I added a few more klds at boot time. This made the boot up
process that much longer that I would run into this issue periodically.
---Mike
--
---
Mi
On 3/12/2019 5:43 PM, Hans Petter Selasky wrote:
> On 3/12/19 9:49 PM, Mike Tancsa wrote:
>>
>
> Hi,
>
> Maybe the device expects some kind of BIOS to enumerate it quickly and
> if not, goes into sleep mode.
>
> Try setting:
> hw.usb.ehci.no_hs=1
>
> In /
e setting.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada
___
freebsd-usb@freebsd.org mailing list
https://l
it will fail to attach.
---Mike
> --
> ---
> Mike Tancsa, tel +1 519 651 3400 x203
> Sentex Communications, m...@sentex.net
> Providing Internet services since 1994 www.sentex.net
> Cambridge, Ontario Canada
___
freebsd-usb@freebsd.org mailing l
At 03:52 PM 13/08/2006, Marc van Woerkom wrote:
Maybe someone here can give a comment?
But writing speed seems slow to me, I measure about 56 to 64 kbyte/s transfer
rate only:
tty ad0 da2 cpu
tin tout KB/t xfrs MB KB/t xfrs MB us ni sy in id
2
On 8/25/2011 3:02 PM, Hans Petter Selasky wrote:
> On Thursday 25 August 2011 21:00:17 Mike Tancsa wrote:
>> I am having periodic problems with the odd u3g device that gets hung.
>> If I try and reset it, it totally locks up and I need to do a reboot of
>> the box the recover.
100 matches
Mail list logo
