Brad Lachel wrote:
When the detail module is loaded, the auth_log appears to get loaded,
but the reply_log does not.
Most likely because it's not being referenced from anywhere.
It is probably due more to my like of knowledge in this area.
Can you post the contents of the
Module: Instantiated preprocess (preprocess)
Module: Loaded detail
detail: detailfile =
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (auth_log)
Module: Loaded realm
Here is the entire post-auth section:
post-auth {
# Get an address from the IP Pool.
# main_pool
#
# If you want to have a log of authentication
replies,
# un-comment the following line, and the 'detail
reply_log'
# section, above.
Brad's Junk Mail wrote:
That's not quite what I asked for...
Here are the lines I thought were relevant from the
radius.conf file:
Please post the lines I asked for, and double-check the default
configuration as I said. Posting out of context snippets from
radiusd.conf helps less than
Thanks, I was missing the info in the reject subsection.
On Mar 29, 2007, at 8:01 AM, Alan DeKok wrote:
Brad's Junk Mail wrote:
That's not quite what I asked for...
Here are the lines I thought were relevant from the
radius.conf file:
Please post the lines I asked for, and
On Wed 28 Mar 2007 19:28, Alan DeKok wrote:
Brad Lachel wrote:
I am trying to create a log that tell me who attempted to login,
when, where and what the result was. I have uncommented the auth_log
line and the reply_log line as well as the detail auth_log and detail
reply_log sections.
6 matches
Mail list logo