Dear sir
Do anyone make a casing that looks like an oversized iMac G4, yet
accept Powermac G5 logic board, the one that have the LCD that pivot,
but the base is larger to accept the lobo from a G5 tower, but it's
still round, or at least round-cornered.?
thank you
On Jun 29, 2009, at 1:46 AM, Mullin9 wrote:
DoES anyone make a casing that looks like an oversized iMac G4, yet
accept Powermac G5 logic board, the one that have the LCD that pivot,
but the base is larger to accept the lobo from a G5 tower, but it's
still round, or at least round-cornered.?
Recently acquired a Sonnet 800 MHz ZIF upgrade for a G3 BW.
I need some install/user guide type info. Searching Google and the
Sonnet support was not helpful.
Does anyone have a link to a user guide or could someone sent a .pdf
-- provided Sonnet ever provided one.
I do have a white jumper
On Jun 27, 6:34 pm, insightinmind billycarm...@verizon.net wrote:
On Jun 27, 2009, at 1:33 PM, leighkimmel wrote:
Recently the PRAM battery on my faithful old G3/233 desktop died. When
I put in a new battery and started it up, I suddenly had no sound. No
startup chime, no system
On Jun 29, 3:01 am, Kris Tilford ktilfo...@cox.net wrote:
On Jun 29, 2009, at 1:46 AM, Mullin9 wrote:
DoES anyone make a casing that looks like an oversized iMac G4, yet
accept Powermac G5 logic board, the one that have the LCD that pivot,
but the base is larger to accept the lobo from
On Jun 28, 2009, at 12:11 AM, Bruce Johnson wrote:
On Jun 27, 2009, at 7:51 AM, Dan wrote:
System log seems to be gone already for yesterday
Use Console.app.
And click the More Logs button. Click the reveal arrows until you get
to /var/logs, you can see previous System logs there.
This is a lovely 700Mhz G3 (the last G3 made) that has no trouble
running 10.3 with 500MB of RAM. Normally.
Alas it has started to fail, and in ways that defy ready diagnosis.
I'm hoping someone here can help.
With increasing frequency, the computer shuts down without warning.
The video goes,
On Jun 28, 10:41 am, Al Poulin alfred.pou...@gmail.com wrote:
Okay, I did not say the $595 models were under the Products tab. But
look at their home page, about half way down. There are three models
at that price.http://matias.ca/products/index.php
Oh, my. There they are. Those are
On Jun 29, 2009, at 8:30 AM, Adam wrote:
This is a lovely 700Mhz G3 (the last G3 made) that has no trouble
running 10.3 with 500MB of RAM. Normally. snip
With increasing frequency, the computer shuts down without warning.
The video goes, there is an audible thunk, and the hard drive goes
On Jun 29, 2009, at 9:11 AM, insightinmind wrote:
com.firmtek.driver.UltraTek133P_48(3.0)@0x5b5000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x4b4000
This is a problem with the ATA card or ATA card
On 30/06/2009, at 3:30 AM, Adam wrote:
With increasing frequency, the computer shuts down without warning.
The video goes, there is an audible thunk, and the hard drive goes
silent. It's definitely not just the video that's out.
Im not completely sure,
But could it be a harddrive problem?
On Jun 29, 2009, at 2:17 PM, Kris Tilford wrote:
On Jun 29, 2009, at 9:11 AM, insightinmind wrote:
com.firmtek.driver.UltraTek133P_48(3.0)@0x5b5000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x4b4000
On Jun 29, 2009, at 2:17 PM, Kris Tilford wrote:
On Jun 29, 2009, at 9:11 AM, insightinmind wrote:
com.firmtek.driver.UltraTek133P_48(3.0)@0x5b5000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x4b4000
On Jun 29, 2009, at 11:57 AM, Po-en Tsai wrote:
On 30/06/2009, at 3:30 AM, Adam wrote:
With increasing frequency, the computer shuts down without warning.
The video goes, there is an audible thunk, and the hard drive goes
silent. It's definitely not just the video that's out.
But could
On Jun 29, 2009, at 12:08 PM, insightinmind wrote:
I'm considering FirmTek's SATA as a replacement later this week ...
along with a 1TB Seagate.
If on a G4 Mac, and possibly also a G5 Mac, all you really need is an
OWC or LaCie SATA card, which is very cheap.
On Jun 29, 2009, at 2:19 PM, Jim Scott wrote:
But I've seen power demands by peripherals cause an
iffy power supply to shut down a complete system.
I agree, an iffy power supply is likely. Excessive heat can cause
shutdowns if there is a cooling issue or an overheating component. I'm
not
The Apple G4 enabler is installed, so do I also need the Sonnet
firmware as well?
I easily installed a similar ZIF upgrade on my BW.
You MUST install the Sonnet software before installing your ZIF
regardless of which OS is installed in your system. The
Crescendo/Encore/ZIF
I did an Archive and Install, but I didn't have much foresight. Once I
saw that the OS itself was working properly, I ditched the old OS to
save disk space (it's only a 30 GB hard drive).
Thank you, though, for ideas much smarter than I am.
On Jun 28, 8:34 pm, Bruce Johnson
On Jun 29, 2009, at 3:10 PM, Len Gerstel wrote:
On Jun 29, 2009, at 2:17 PM, Kris Tilford wrote:
On Jun 29, 2009, at 9:11 AM, insightinmind wrote:
com.firmtek.driver.UltraTek133P_48(3.0)@0x5b5000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x491000
dependency:
On Jun 28, 3:40 pm, glen glenst...@yahoo.com wrote:
Recently acquired a Sonnet 800 MHz ZIF upgrade for a G3 BW.
I need some install/user guide type info. Searching Google and the Sonnet
support was not helpful.
You must remove the G4 Block which is in the Firmware (not the
jumper block
- Original Message
From: Bruce Johnson john...@pharmacy.arizona.edu
OWC Computing has some good info online about ZIF upgrading in their
support stuff.
I found a rather generic pdf: encore_zif_trimanual.pdf
which is 120 pp in three languages and cover a variety of Mac's.
- Original Message
From: tortoise cymraeg...@gmail.com
On Jun 28, 3:40 pm, glen wrote:
Recently acquired a Sonnet 800 MHz ZIF upgrade for a G3 BW.
I need some install/user guide type info. Searching Google and the Sonnet
support was not helpful.
You must remove the
Waay back in the day, I used filemaker for donor records and such
at the small nonprofit where I worked. You created the fields,
arranged them in a data entry form and then created forms for address
lists, thank you notes, tax deductible receipts, so on and so forth.
Very simple.
i...@sajego.net wrote:
Waay back in the day, I used filemaker for donor records and such at
the small nonprofit where I worked. You created the fields, arranged
them in a data entry form and then created forms for address lists,
thank you notes, tax deductible receipts, so on and so
On Tue, Jun 30, 2009 at 1:01 AM, i...@sajego.neti...@sajego.net wrote:
Waay back in the day, I used filemaker for donor records and such at the
small nonprofit where I worked. You created the fields, arranged them in a
data entry form and then created forms for address lists, thank you
On Jun 30, 2009, at 12:01 AM, i...@sajego.net wrote:
Can anybody point me to a simple and relatively cheap database
solution or some sort of spreadsheet template?
You might consider using Google Spreadsheets to store your stuff in
the cloud, and have it accessible from all computers.
Howdy,
Would memory pulled from a G4 Quicksilver work in a Gigabit Ethernet
G4? It is PC133 memory and I know that memory generally works in PC100
systems, but I don't know if the G4 Gigabit is sensitive to the speed
difference.
Good day,
Ralph
I think it would. Try it and see. That is my method. If I find some extra
ram I put it in and see if it works.
-Jonas
On Mon, Jun 29, 2009 at 10:34 PM, Ralph Green sfrea...@sbcglobal.netwrote:
Howdy,
Would memory pulled from a G4 Quicksilver work in a Gigabit Ethernet
G4? It is PC133
On Jun 29, 2009, at 10:34 PM, Ralph Green wrote:
Would memory pulled from a G4 Quicksilver work in a Gigabit Ethernet
G4? It is PC133 memory and I know that memory generally works in
PC100
systems, but I don't know if the G4 Gigabit is sensitive to the speed
difference.
No difference,
29 matches
Mail list logo
