On 06/02/2012 07:23, t...@io.com t...@prismnet.com wrote:
The HP Fire GL X3 has two DVI ports and has the dedicated DVI chip on
board. Apparently, conversion of the Fire GL X3 does yield two
working DVI ports. It may require the full Mac firmware (Flash chip
replacement) to get that
On 09/02/2012 12:52, turn turn...@gmail.com wrote:
There is Geforce 4 Ti 4400 ROM modified for PPC here:
http://themacelite.wikidot.com/wikidownloads2 - so I am wondering if
anyone thinks it might work to just flash with that. -?
The Ti Geforce models were troublesome AFAIR due to hard
On 09/02/2012 16:40, Jesse jesse.wm.wall...@gmail.com wrote:
I've run the August 2005 ROM update while booted up in Safe Mode (OS X
10.4.11) and STILL am not having any luck. The card itself is listed
as Part Number 109-85500-01 which matches up as the Radeon 7000 Mac
version and as far as I
On 03/02/2012 17:04, t...@io.com t...@prismnet.com wrote:
Do you know if the X800 has the ROM lock feature. Thomas Perrier's
site seems to be specific to the R9800. I have a few X800/X850s
kicking around I've been meaning to convert. I thought all I'd need
to do is replace the flash chip.
On 02/02/2012 16:30, Bruce Johnson john...@pharmacy.arizona.edu wrote:
The flashing process does not involve soldering at all, but is accomplished by
software on a PC...
--
ErrThat's not quite true Bruceflashing from PC to mac bios has
always involved soldering since the
On 27/01/2012 21:08, Michael McMurtrey skyking...@verizon.net wrote:
i recently purchased a Radeon 9800 Pro video card from an ebay seller. It was
advertised as 256 Mb VRAM, and there is indeed a sticker on the card which
identifies it as such. However, after installation, System Profiler
On 27/07/2011 14:19, Maccountant gsuc...@gmail.com wrote:
Has anyone done this before? I purchased a Sonnet G4 1.8gz MDX for my
G4 single 1.25 MDD. It works fine but generates too much heat, even
with the built-in fan. I want to remove the heatsink and replace it
with an Apple copper one from
On 27/05/2011 10:58, Kris Tilford ktilfo...@cox.net wrote:
Not all G5 Macs came with ADC cards. My G5 had the dual-DVI ATI RV351
128MB Radeon 9600 Pro. I've placed other AGP cards into my G5, and the
ones I've not been able to fit because of slot issues were all slower
AGP cards. I've not
On 26/05/2011 05:42, Baldassare Guzzo guz...@gmail.com wrote:
I see and read all over the place about people putting the Radeon
9800 Pro cards in their QS machines.There are dedicated websites
discussing upgrades for QS users and all recommend the 9800 Pro as
the best way to go. So is
On 11/05/2011 21:59, blindspot-smi...@yahoo.co.uk
blindspot-smi...@yahoo.co.uk wrote:
The monitor will eventually fire up - might take two, three, four G5
power-ups,
might have to leave it for hours and just sometimes it might come on
immediately.
Haven't successfully powered
On 14/03/2011 05:51, Mac User #330250 macuser330...@gmx.net wrote:
Why tape the pins 311, if this card doesn't feature ADC?
The taping is required for any 8x agp card to work in any 2x/4x agp capable
mac with adc connectors. These pins were unused in the 2x/4x agp spec but
brought into use for
On 9/3/11 23:06, Paxton innfo...@gmail.com wrote:
I have been buying 9800 Pros (PC versions) from $15 to $20 at the Free
Geeks thrift store in Portland Oregon.
Whoa! That's a long way for me to go for a 9800 from the UK...
Pete
--
You received this message because you are a member of
On 9/3/11 04:14, Valter Prahlad valter.prah...@fastwebnet.it wrote:
Il giorno 7-03-2011 22:43, pdimage ha scritto:
I'm in the UK and I can usually pick one up for around £10 - £20 on ebay
- which is around 15 - 30 dollars I guess - plus postage. Postage to the US
via airmail is around 8
On 8/3/11 03:37, peterh...@cruzio.com peterh...@cruzio.com wrote:
I have 3 high density 512mb chips... am I good to go?
It's certainly low for the PC100/133 variety for early Sawtooth through
Quicksilvers but I'm not sure for the PC2700 varietyI always understood
that high density was
On 6/3/11 09:07, Justin The Cynical cyni...@penguinness.org wrote:
b) Identify the correct Mac ROM - if there is such a thing - for the
card. Extra points for revealing how you know and where to get it.
This one, that's a bit trickier, if not impossible.
The mac rom is from the FX5200
On 7/3/11 20:30, Justin The Cynical cyni...@penguinness.org wrote:
Define cheap and where to get one.
I look on the usual place, fleabay, and I see 9800 pros going for around
100 US... Mac versions are double that. Not quite what I would
consider cheap. :-)
I'm in the UK and I can
On 25/1/11 15:10, Bill Connelly billycarm...@verizon.net wrote:
Sounds like a possibility ...
It has CI Software Support:
NVIDIA GeForce4 MX:
Chipset Model: GeForce4 MX
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: NVIDIA (0x10de)
Device ID:
On 25/1/11 17:38, Yersinia yersi...@myfairpoint.net wrote:
another lister mentioned wanting to run some vintage apps, and it
brought to mind one VERY vintage app - After Dark. tho it's a stoopid
waste of time and resources, i just have to ask - does anyone know
whatever happened to berkeley
On 25/1/11 07:20, Bill Connelly billycarm...@verizon.net wrote:
Well ...
I tried Reset Safari to no avail, then tried disassembling my Mac,
reseating all PCI cards (SATA and USB2) and memory after cleaning
contacts.
The streaking only appears regularly in Safari's Top Sites window.
On 19/12/10 03:27, Bill Connelly billycarm...@verizon.net wrote:
Good info. I have a ATI Radeon 9800 Pro ME, and was wondering if the
cooling fan ever fails, will I get a similar warning?
No - the warning is just for the 12v power connection to the card.
However, the fan is easy to replace
On 16/9/10 19:46, Aerendel jimwelling...@gmail.com wrote:
Thanks, Pete, I had gone to that page and it looked doable, but I
wondered if there were any motherboard problems with the M5183 that
would still cause problems. taping the pins looked like you'd better
have a steady hand and plenty of
On 16/9/10 16:19, Aerendel jimwelling...@gmail.com wrote:
Will a EVGA (brand) nVidia GeForce 6200 LE (8x AGP card work with a
M5183 (digital Audio?) (the back panel looks like AGP Graphics set
up)
Most problems are weird, but, Somebody donated an older Mac G4 to the
local museum here. I'm
On 21/7/10 10:51, James Therrault jetas...@netzero.com wrote:
Still had a waxer for ultimate paste up plus photographs were still a
task of the printer, (pre-press).
That's me! Pre-press final film planner, platemaker, camera, scanner,
Cromalin proofer et al extraordinaire. Boy were those
On 20/7/10 07:16, Wallace Adrian D'Alessio fluxstrin...@gmail.com wrote:
It is not about Mac G hardware or one step removed. It is a good
candidate for the Mac2Mac list or a list where people like to debate
what plain text is while sending in rich text somewhere
It is about display
On 20/7/10 08:19, Gus gusr...@comcast.net wrote:
BUT!!! I am smart enough to know that I don't know everything. Is
there something I am missing with this G4 - G4 swap?
Thanks.
For grins, I did drop the system clock from 400.. then up to 500 No
change with the 500 mhz g4, Still
On 20/7/10 21:27, Gus gusr...@comcast.net wrote:
okay.. unpluged everything. removed everything from the usb bus but
the keyboard and mouse.
changed the chip. changed the jumper. removed the battery. Let it
sit for 30 mins.
pressed the cuda button for five seconds.
put the battery
On 19/7/10 03:39, James Therrault jetas...@netzero.com wrote:
You don't appear to be using plain text, (at least in my reader).
sigh
JT
Hmm - I am experiencing this anomaly recently too. I've been on the
lists for more years than I care to remember and originally used Claris
On 19/7/10 11:19, James Therrault jetas...@netzero.com wrote:
I use Apple's Mail and have it set to only send out in plain text.
To see if you are actually using plain text, just type out a few
letters in a new mail. Then select all the text that you have type,
click on Fonts, and it
On 19/7/10 13:54, Dan dantear...@gmail.com wrote:
What you observed, in this particular case, was kindof a cascade
failure. Kevin Barth's reply in the thread was in rich text. Kyle
replied to that, quoting Kevin, so his email client used the same
format. Then James replied to that, and
On 13/7/10 12:29, John Carmonne carmo...@aol.com wrote:
OK. simple you say? I'm sure going to try to. I guess the trick here is
getting the right cable. So to start how can I check positively the capability
of my two DVI ports on my Radeon 9600 card? Then from there I should have part
of the
On 14/7/10 08:45, pdimage pdim...@btinternet.com wrote:
On 13/7/10 12:29, John Carmonne carmo...@aol.com wrote:
OK. simple you say? I'm sure going to try to. I guess the trick here is
getting the right cable. So to start how can I check positively the
capability
of my two DVI ports on my
On 12/7/10 22:07, John Carmonne carmo...@aol.com wrote:
Hi All
I want to get a large screen TV that I can connect my PM G5 Dual 2.7 to and be
able to watch DVD images. What do I need to be able to do this? ,I don't want
to watch iTunes stuff just full on DVD images like I do now by mounting
On 6/7/10 17:56, Dennis Myhand dmyh...@ednaisd.org wrote:
I bought an ATI Video Card off of eBay, a 128 meg 9600XT and modified it
to work in a G-4 DA. The card works, but the fan screams like hell. Do
I need the fan? I have a couple of PCs with 128meg and 512 megs and
neither of them even
On 28/6/10 20:09, Dennis Myhand dmyh...@suddenlink.net wrote:
Hi All:
I am looking to upgrade the video in my DA dual 533. I found the
following card on eBay:
MAC nVidia GeForce4 Ti 4600 AGP Video Card 128MB VRAM
Here is the link:
On 24/6/10 08:46, Mark Sokolovsky coolmar...@gmail.com wrote:
Hello everyone, I need help on this one, so try your best. I recently picked
up myself a nice deal on a new video card. for $60, I got myself an ATI Radeon
9550 AGP 8x with 256MB of DDR2 Video RAM. I am pretty much fed up with even
On 16/6/10 05:56, Mark Sokolovsky coolmar...@gmail.com wrote:
I have been an expert on computers since the dawn of the DOS systems, and
this is something i really am stumped on. I have an Nvidia GeForce 6200 AGP
with 256Mb DDR2 RAM AGP 8X, and it's a PC card. Can somebody show me step by
step
On 9/5/10 01:04, Clark Martin cm...@sonic.net wrote:
Is it DOS or the DOS command shell under Windows that the card patching
programs need. I always figured they were DOS programs because those
writing them were too lazy to create a GUI.
It's plain old DOS usually - booted from a floppy
On 8/5/10 20:48, Mark Sokolovsky coolmar...@gmail.com wrote:
i have recently bought an ATI Radeon 9600 with 256MB video RAM. I know
I have to do some tweaking to put it in a PM G4 graphite Sawtooth
It is a PC card. I have Leopard on the sawtooth right now, but the
video card has only 64MB
On 12/2/10 15:54, Nicholas Fantuzzi snii...@gmail.com wrote:
Did you read the previous mails?
First of all, a 500GB PATA drive doesn't exist at all, secondly I have a 500GB
SATA drive.
Doesn't exist? What's this then?
http://tiny.cc/CjJMm
Pete
--
You received this message
On 10/2/10 21:30, Geke gevangaste...@googlemail.com wrote:
Thanks a lot!
That link from Pete is precious; I can mention it to the company so
they can check for themselves...
(Note that it runs over two lines that should be connected before
pasting into the browser.)
Geke
I wondered
On 10/2/10 14:21, John Carmonne carmo...@aol.com wrote:
The bottom line first:
If a 512MB PC133 SDRAM RAM module for the G4 Digital Audio has chips
on one side of the stick only, can it be low-density?
Thanks in advance!
Geke
I don't think sosee
On 8/2/10 17:53, Jonas Ulrich jonasulrich3...@gmail.com wrote:
Yeah it does sound stupid, however the pennies are taped together VERY well,
and are taped to the surface VERY well, unfortunately the problem is back so
I'm thinking of trying to reflow the solder on that chip. Any ideas of how to
On 4/2/10 21:51, Mark chris...@fuse.net wrote:
Which brings up the question, how are you printing?
From an inkjet ?
Sending files to a printing company as PS/PDF ?
Just an Epson R340 for all of the printing - printable cd/dvd too. Print
resolution is max 5760dpi with six colours so
On 5/2/10 01:29, Clark Martin cm...@sonic.net wrote:
If the text is done in bit map then it should be dismissed. For stuff
going to printers you want it all in vector except for actual photos.
The alternative is to raise the working resolution of the document
beyond the point where
On 4/2/10 19:10, Meghrouni Vince foomc...@sbcglobal.net wrote:
Needed:
An app with which to create/design flyers and posters in which images
and text can be manipulated, that doesn't cost an arm and a leg. Not
for for-hire professional graphics, but for small business promotion
On 3/2/10 12:55, Norm Rowe nrow...@roadrunner.com wrote:
Been here before and thanks for the help but my problem continues. First
I can not afford a new intel mac or evan a good used ppc mac. My screen
is now OK with a addition of new ATI 9800 Mac Pro video card. Now the
power button still
On 30/1/10 16:30, PM7500 jburke...@comcast.net wrote:
If it's an 8x card you need to tape over pins 3 and 11 to make it work
in a 4x AGP slot Powermac. The 8x specification hadn't been finalized
at the time Apple made the Digital Audio Powermacs so they used the
unused pins to carry power for
On 30/1/10 17:08, Bill Connelly billycarm...@verizon.net wrote:
I'm looking to buy something (maybe the lcd-type screen), to project
clear still images, so I can work in a painting studio from pictures
I've taken outdoors.
Wondering about projecting a single image for relatively long
On 30/11/09 12:49, Geoff Black bla...@telkomsa.net wrote:
Microsoft Entourage had built up a 16 Gb Identities folder in
Entourage office 2004.
I upgraded to MSO 2008 and it transferred the identity to the new
version.
None of the mail wants to open.
It reccomends a rebuild of the
On 31/10/09 05:10, PETER WARNER pe...@petermwarner.com wrote:
Having updated the ROM to the August 05 (130), I still had the same
problems. Then I re-read this, and it caught my eye. My stock
frequencies in ATIccellerator II are listed as Processor 378 MHz, and
Memory 337.50 MHz. So I took
On 31/10/09 12:47, Bill Connelly billycarm...@verizon.net wrote:
My apologies if I sounded like I was being patronizing ... that was
not my intention.
It had also, always been my experience to perform download the latest
drivers whenever there seemed to be a software/hardware issue.
But
On 30/10/09 15:53, PETER WARNER pe...@petermwarner.com wrote:
Any Ideas?
Here are my specs:
G4 Gigabit Ethernet Dual 450
1 Gig of matched RAM (4...@256 PC 133-333)
6 port PCI USB 2 card
USB devices are mostly powered, or on a powered hub
Acer X183H 1360x768 @ 60Hz 18.5 WS monitor
ATI
On 30/10/09 20:18, Bill Connelly billycarm...@verizon.net wrote:
If there's a way to do it under OS X 10.5.8 or even under OS 9, I
would oblige.
Unfortunately, my Compaq Presario is somewhat gutted ... and has
rolled over, dead.
There's a program called Graphiccelerator which you can
On 29/10/09 00:08, Bruce Johnson john...@pharmacy.arizona.edu wrote:
the scanner's colorsync profile is messed up on the weird G4, I'll bet.
Go into /Library/ColorSync/Profiles on the weird G4 I'll bet there's a
folder marked HP, possibly in a folder called scanners. Replace that
folder
On 26/10/09 04:51, Bill Connelly billycarm...@verizon.net wrote:
Under Leopard 10.5.8, will an ATI Radeon 9800Pro work ok in a DA Dual
533?
Currently have a GeForce 4MX, which performs OK, minus hardware
accelerated Core Image, but I have the 9800 in my QS and don't use it
a lot now.
On 26/10/09 10:21, Stewie de Young stewies...@hotmail.com wrote:
9800s are supposed to only go in computers that have a 300W PSU or greater
especially the 256mb cards as they draw considerably more power than older
video cards like the standard Rage Pros.
Whats in the DA - a 308W PSU ?
On 13/10/09 05:08, Erik Hancock ehanc...@concentric.net wrote:
Had my AGP bite the dust power system or logic board Was smoking and
sizzling as soon as power cord plugged in alt power supply no help.
Purchased a used AGP and swapped the drives and now not sure if it is
booting up
On 13/10/09 14:51, Erik Hancock ehanc...@concentric.net wrote:
Yes - Sawtoowth AGP version - the current card with no signal is the
ATI Rage - presumably the original version (DVI and VGA ) posts.
Tried the pram reset and to boot off master disc - with no video - found
original rage 128
On 23/9/09 18:50, Jeffrey Engle macgu...@gmail.com wrote:
No firewire...on this imac. Jeff
On Sep 23, 2009, at 10:34 AM, Dan wrote:
Connect the iMac to another Mac via firewire Target Disk Mode then
use CCC to slam the system over.
I put Tiger on a stinky pinky (strawberry) 333mhz
On 23/9/09 07:40, dorayme dora...@optusnet.com.au wrote:
Turn off your machine, open it, put the power cord back in (the wall
socket to off position though) and have everything ready. Touch the
metal part of the QS (not any electronics!). Handle both cards by the
edges only (just look and
On 21/9/09 15:59, Len Gerstel lgers...@gmail.com wrote:
On Sep 21, 2009, at 10:48 AM, Gus wrote:
Also, I bought this card from ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=120468674399
I was told this would also alleviate my video blacking problem.
Unfortunately,
On 21/8/09 14:56, corolla2 victoria.mie...@gmail.com wrote:
Hello, I recently bought a Power Mac G4 Sawtooth and made several
upgrades to it with no problems -- until I added a ATI Radeon 7000 Mac
Edition video card.
My G4 is running OS X 10.4, updated to 10.4.11. It has a Sonnet Encore
On 6/7/09 21:37, Michael Koch troutcr...@ncwcom.com wrote:
Question to All
Has anyone gotten OverDrive to work; in overcoming the 128Gb limit ?
I installed it on the wife's G4 Dual 500 and it makes on difference.
When i go to find update, I get file not found.
Any advice
Thank You
I
On 4/7/09 23:48, joplinfan kawni...@cableone.net wrote:
Hi all,
I'm getting ready to flash a BFG / Geforce 6200 and a Radeon 9250...
both standard PCI cards... to use in my MDD G4 1ghz towers. Been
studying up on the process at The Mac Elite website where it mentions
that AGP cards
On 3/7/09 15:31, Roger Deghetto ppcpowerma...@yahoo.com wrote:
i know if you take a radeon 9800 out of a g5 the one with dvi /adc ports you
have to tape pins 3 and 11 to get it to work in a 4x g4 what id like to know
does doing that disable the adc port in other words would i still be able to
On 25/6/09 23:49, dev0001 ocd...@gmail.com wrote:
Does anyone happen to know if you can swap an eMac 1 GHZ motherboard
and assembly into an original 700 MHz model?
I swapped a 1ghz emac mobo into an 800mhz emac - but I seem to recall
the 700mhz is a different fit for the output ports - no
On 21/6/09 02:57, insightinmind billycarm...@verizon.net wrote:
I recently put my GeForce4 MX in my new Digital Audio Dual 533, and
was at least expecting Software Support for Core Image. Running Tiger
10.4.11, with PCI Extreme (from a previous setup), now set back to AGP.
But no.
When
On 9/6/09 18:45, aussieshepsrock ilovaussiesh...@yahoo.com wrote:
Seeking a reliable web resource or resources to become knowledgeable
in choosing a color critical Monitor for myself. My google searches
looking for websites or webpages were ludicrously scatter shot and
mostly 'forum' posts
On 9/6/09 20:27, aussieshepsrock ilovaussiesh...@yahoo.com wrote:
Me thinks I overstated my hopes and expectations!
I'm not seeking a mission critical or pre-press/soft-proof grade
Monitor, per se.
I'm thinking more along the lines of Beautiful Monitor to live with
and use for
On 5/5/09 22:00, starrf...@valley.net starrf...@valley.net wrote:
I'm running an ATI 9800 Pro Mac Version in a Quicksilver. Usually I
have two LCD monitors on it, but once I used the TV output for a
special job. Since then the board thinks there's a TV attached to it
and always creates
On 6/5/09 14:09, Nesta nestami...@gmail.com wrote:
Where exactly are these preferences located on the system's HD? I've heard so
many people use the phrase trash the preferences without direction on where
they are. It's important since deleting stuff in OS X can be problematic.
I assume
On 3/5/09 22:28, roger deghetto linuxuse...@yahoo.com wrote:
im working out a trade for a ati all in wonder 9800 pro video card guy said
its not flshed but he also said he thinks it will work in a mdd g4 im taking
it since it is a 9800 pro it will or am i thinking wrong
thanks roger
I
On 8/4/09 06:37, insightinmind billycarm...@verizon.net wrote:
Now I did a Restart with C for the Installation DVD, and I get video.
Doesn't that mean the card is ok, somethings wrong from the OS X
partitions holding the system? or is something wrong with my hard
drive?
If you get video
On 7/4/09 19:43, insightinmind billycarm...@verizon.net wrote:
The ATI Radeon 9800Pro Mac Edition, I thought, was supposed to be
ready for the QS 2002 ... no taping required.
I have now removed the battery for 20 minutes, and am waiting awhile
after replacing for it to build the mobo back
On 7/4/09 17:05, insightinmind billycarm...@verizon.net wrote:
I tried the trashing of the Extensions.mkext, so far no help there.
Is the wire with the square shaped head in the airport slot area, just the
airport wire? Does it have to be touching anything? I moved it away from the
metal
On 5/4/09 18:42, diane di...@mathermotorsports.com wrote:
At 1:25 PM -0400 4/5/09, insightinmind wrote:
Tried booting from the Installation CD/DVD?
How about another video card? maybe re-seating the old one, after
blowing out the dust?
I think he has tried the boot as he first
On 4/4/09 02:36, insightinmind billycarm...@verizon.net wrote:
Anyone got some recommendations for anything to test my AGP video card?
Its in a QS 2002 Dual 1GHz.
(ATI Radeon 9800Pro Mac Edition)
AMD (ATI/Avid) suggested Googling to find 3D Benchmark applications ...
I couldn't find
On 1/4/09 04:25, aussieshepsrock ilovaussiesh...@yahoo.com wrote:
I'm entering a mixed marriage (girlfriend is a PC user) and I'm
considering options for having co-usable data drives, files, and
etcetera. (Yes, she's slowly being seduced by the powers of Light
Goodness - the new iMac's
On 15/3/09 21:13, Amanda Ward amanda.w...@comcast.net wrote:
I have the aforementioned heat sink and CPU apart. What would be a
good thermal compound to reassemble the beast?
I do have a dab of Arctic Silver from a former project. Think this
would be okee dokee?
The chip doesn't seem to
On 15/3/09 09:21, Amanda Ward amanda.w...@comcast.net wrote:
I have a CPU (Intel type) with a large heat sink that is firmly stuck
to the processor.
Any thought on getting the two separated. They should come apart
somehow... the CPU is a ZIF and you can't get it back into the socket
because
On 15/3/09 13:56, Lawrence David Eden lde...@comcast.net wrote:
I have a new hard drive on order. I plan to install it into my BW
and after carbon copy, switch it to the master position. I am
presently using a Quantum Fireball as my main drive. Interestingly,
the BW prefers me to set
On 13/3/09 22:18, MacGuy macgu...@gmail.com wrote:
just replaced my stock mdd heatsink with a copper one, question, is
there a break-in period and if so, approx. how long? I'm sitting at
135.6F (57C) and the fans are running at a high rpm with no load on
the computer to speak of. Jeff
On 14/3/09 16:28, Kris Tilford ktilfo...@cox.net wrote:
Is this true?
I'd think there's a chance the the word conductive is being
misinterpreted?
It seems to me that thermal paste is likely to be thermodynamically
conductive and not likely to be electrically conductive?
Yes this is
On 14/3/09 14:50, PAR prieme...@msn.com wrote:
still don't have a good feel for an answer. For example, arctic
silver (and comparable products) say they are thermal conductors and
not electrical conductors, yet the fine print says it may end up
shorting out circuits -- in plain English,
On 13/3/09 13:54, insightinmind billycarm...@verizon.net wrote:
In a similar vein ...
I have a Dual 1GHz QS 2002 ... seems to be working fine ... just concerned
about age.
Would it be advisable to go on and remove the heatsink(s), clean the surfaces,
and re-apply thermal grease? Sort of
On 10/3/09 07:23, Paul pper...@gmail.com wrote:
After looking at the NTFS drive after installing it in a PC, I saw
that some OS 10 files, such as .trashes, had been written to it.
Is there anyone else with an NTFS drive and a vanilla installation of
Tiger (with no special utilities) who
On 9/3/09 14:38, mythmaker18 mythmake...@yahoo.com wrote:
I've got a couple G3 iMacs I inherited and was planning to fix them up
for family, one 350 slot-loaded and one 500 slot-loaded.
Unfortunately, one of them had the HD removed. On most Macs, I'd just
slap in one I have lying around,
On 1/3/09 17:47, Lawrence David Eden lde...@comcast.net wrote:
Hmm, that's strange, the hard drive should work in either, if it's an
IDE HD. You could just install OSX on the G4, then put the HD from the
G4 in the beige, (hopefully this would work?) then move you home
folder over, and
On 28/2/09 08:31, dorayme dora...@optusnet.com.au wrote:
On Feb 28, 10:34 am, Bruce Johnson john...@pharmacy.arizona.edu
wrote:
I need to prepare about 100 photos for ID's and class photo composites
for our incoming students; each got their picture taken at interview
time.
The
On 13/1/09 05:29, aussieshepsrock ilovaussiesh...@yahoo.com wrote:
The optical
resolution of your scanner - say 600x600ppi for this purpose - is the limit
for original capture - higher resolutions like 9600x9600ppi can only be
provided by interpolation ...
Your input is greatly
On 8/1/09 22:29, aussieshepsrock ilovaussiesh...@yahoo.com wrote:
HiYa Pete and Everyone,
My intended Scanning Methodology - Seperate from my Media Storage
Options - is something like this. I've only done a 50 image or so
'test' run to sort out file size and physical process
On 7/1/09 23:00, aussieshepsrock ilovaussiesh...@yahoo.com wrote:
Original Poster here..
This jpeg vs tiff question is pretty important to me. My personal
experience with jpegs is that the inherent nature of how the
compression it uses works, very little quantities of data loss equate
On 6/1/09 16:35, Sam Macomber s...@macomber.com wrote:
RAW format is all the information captured by the camera's sensor in
an unaltered state(though sometimes lossless compression is used,
depends on the camera). To generate a TIFF that sensor data has to be
altered and when you do so
On 23/10/08 09:23, Simon Royal [EMAIL PROTECTED] wrote:
Hi
Is anyone running Leopard on an eMac? I had a 1Ghz eMac when they first
come out (my first brand new Mac) and it was fantastic, a great little work
horse.
I am looking at getting another one, preferably a 1Ghz and above as
94 matches
Mail list logo