On (03/06/09 15:40) Dale wrote:
Alan McKinnon wrote:
On Wednesday 03 June 2009 18:39:56 Dale wrote:
Why not copy the config from the old kernel over and run make
oldconfig? May need to do some cleaning after genkernel tho.
That's the correct way :-)
But the OP asked if
On (26/01/09 09:35) Grant wrote:
What do you guys think of this? Do you know of a good cruft removal
script?
Yep, there's quite good one in gentoo itself.
Basically, you'll need to write a short config for it, consisting of
lines like cruft name, cruft src uri and a few more lines
On (23/06/08 06:26) Chris Walters wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Sorry if this subject has been hashed and rehashed again, but I was
wondering
which Gentoo partition encryption scheme is considered the best, in terms
of:
1. Security
2. Ease of setup and use
3.
Hi,
Due to problems with coreutils w/ 'xattr' USE-flag (cp) can't remerge it
as some other packages.
So need a binary package w/o xattr, a newer version will
probably solve this too (need a i686-binary).
Seems i could also use the install disk to get it but don't have one
available.
Any hints
On (19/06/08 22:41) Mateusz A. Mierzwiński wrote:
Hi!
I have problem with Keyboard Layout. I've set KDE (3.5.9) to use Polish
Keyboard Layout, but when i press left ALT it brings event like RETURN key
was pressed. After pressing UP arrow print screen event with screen capture
app bringing
On (04/05/08 12:49) Norberto Bensa wrote:
Hello list,
svn (dev-util/subversion-1.5.0_rc4) doesn't want to update nor add layman's
repos:
$ sudo layman -a vmware
* Running command /usr/bin/svn co
http://overlays.gentoo.org/svn/proj/vmware/trunk/;
/usr/portage/local/layman/vmware...
Mark Knecht wrote:
Hi,
I'm just about done cleaning up a machine that I haven't touched in
a while. For the first time I used eix-test-obsolete to look for
inconsistencies in the portage config files. It worked wel. The
machine is clean in terms of emerge -DuN world;emerge
On (31/03/08 11:14) econti wrote:
Rumen Yotov ha scritto:
econti МапОÑ?а:
Hi all, yesterday I upgraded dhcpcd, now at boot time I receive this
message:
err, eth0: Failed to lookup hostname via DNS: Name or service not known
Even so, the IP is correctly assigned by the router.
Could
econti написа:
Hi all, yesterday I upgraded dhcpcd, now at boot time I receive this
message:
err, eth0: Failed to lookup hostname via DNS: Name or service not known
Even so, the IP is correctly assigned by the router.
Could anyone help me to understand? ;-)
Bye
emilio
Hi,
Look at the
Max написа:
Hello,
I just resoved the unixODBC problem after the gnutls update yesterday,
and got another problem now.
gnome-extra/gnome-keyring-manager-2.20.0 failed to build because
libgnutls.so.13 is missing. Of course i tried it with a symlink to the
installed
Jan Seeger wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
- -BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello list,
As per the subject: I recently rebuilt perl from a non-threaded to a threaded
version (with ithreads). Libperl-depending ebuilds were rebuilt correctly, but
all installed
On (22/02/08 06:37) Grant wrote:
I upgraded my router's kernel from linux-2.6.18-hardened-r6 to
linux-2.6.23-hardened-r7 and now I get errors when starting the
firewall:
requires NAT which is disabled
ERROR: Command /sbin/iptables -A FORWARD -m state --state
ESTABLISHED,RELATED -j ACCEPT
On (20/02/08 11:02) Alan McKinnon wrote:
On Wednesday 20 February 2008, Stéphane ANCELOT wrote:
Hi,
I made a silly mistake :
emerge --unmerge python*
now emerge does not work anymore since it needs python !!!
Any idea ?
Best Regards
Steph
Oops.
An easy way is to get a
Alan McKinnon написа:
On Wednesday 20 February 2008, Michael Schmarck wrote:
emerge bash-3.2-p17-r1
emerge portage
emerge bash
This worked for me, as I found out a short while after I posted
my original message :) Thanks a lot for your explanation. This
way, it's at least understandable *WHY*
Alan McKinnon написа:
On Friday 15 February 2008, Erik wrote:
What do you mean by Hans is a weird person.? Do you know him
personally or did you just read it somewhere? I only saw a video
lecture with him talking about namespaces and filesystems (he seemed
perfectly normal there at least). And
On (01/02/08 23:44) Mateusz Mierzwinski wrote:
Total: 246 packages (201 upgrades, 1 downgrade, 38 new, 6 in new slots),
Size of downloads: 1,047,420 kB
Fetch Restriction: 1 package (1 unsatisfied)
Would you like to merge these packages? [Yes/No]
PS: Gentoo is only known by me distro that
On (30/12/07 16:18) Grant Edwards wrote:
On 2007-12-28, Qian Qiao [EMAIL PROTECTED] wrote:
Would there be any reason to keep the older gcc 3.46? I'm
not familiar enough with Gentoo under-the-hood to decide.
Try equery depends =gcc-3*, without the quotes obviously.
If none of the
Hi,
On (19/12/07 08:43) Grant wrote:
Here is an excellent interview with Ciaran McCreesh about Paludis:
http://lab.obsethryl.eu/content/paludis-gentoo-and-ciaran-mccreesh-uncensored
Thanks for the link.
Has anyone here switched from Portage to Paludis?
Yes, for some 4-5 months and plan to
On (19/12/07 20:05) b.n. wrote:
Dirk Heinrichs ha scritto:
On Wednesday 19 December 2007 17:43:41 Grant wrote:
Has anyone here switched from Portage to Paludis?
Yes, I did it long time ago :-)
I'd like to try Paludis, looks very promising.
I think I've read that Portage and
Bo Ørsted Andresen написа:
On Wednesday 19 December 2007 21:37:38 Rumen Yotov wrote:
Watch out for some scripts (perl-cleaner, claw-mail, etc.) in which the
use of portage/emerge is embedded. Put 'paludis' as USE-flag.
Unless you use a crappy, unsupported overlay no such use flag
On (17/12/07 11:29) Ralf Stephan wrote:
What does everyone else think about this. Is portage a major blocker
of progress or not so much?
As said above, details are major blockers of progress.
On the other hand, when I switched to paludis, 100 MB
of unnecessary packages suddenly were
Grant написа:
I'd like to create a really restricted user on my laptop. I don't
want the user to be able to do much of anything but browse the web,
use skype, and maybe look at photos on a CD or something. I did this:
useradd -m -G users,audio,cdrom -s /sbin/nologin newuser
How does that
Vasiliy G Tolstov написа:
I'm running gentoo on amd64. Openoffice failed to build on my machine
with following error
ERROR: preinst
This package will overwrite one or more files that may belong to other
packages (see list below). You can use a command such as `portageq
owners / filename` to
On (10/12/07 10:37) Iain Buchanan wrote:
Hi all,
I just upgraded from hibernate-script-1.97-r3 to
hibernate-script-1.97-r4, and now at every stage of the suspend to disk
and resume process, I see this message:
Press SPACE to continue.
So I have to press the space bar about 4 times
John covici написа:
Sorry if this is a duplicate -- II never got it back, so I am sending
it again.
Hi. I was trying to do an emerge --update --deep --with-bdeps=y world
and got the following error:
!!! All ebuilds that could satisfy =sys-auth/policykit-0.6 have
been masked.
!!!
On (08/12/07 18:46) Daniel Pielmeier wrote:
John covici schrieb:
on Saturday 12/08/2007 Rumen Yotov([EMAIL PROTECTED]) wrote
John covici ??:
Sorry if this is a duplicate -- II never got it back, so I am sending
it again.
Hi. I was trying to do an emerge --update --deep
Mick написа:
Hi All,
Could you please help me understand how I should be setting hibernation for
my
laptop:
There an new hibernate options in the new stable kernel:
[*] Suspend to RAM and standby
[*] Hibernation (aka 'suspend to disk')
(/dev/hda1) Default resume partition
[*]
On (23/11/07 07:58) Dirk Heinrichs wrote:
Am Donnerstag, 22. November 2007 schrieb ext Dan Farrell:
However, if you su or
something, you'll no longer have that environment variable.
Hmm, although I'm not sure why, I do:
% whoami
dheinric
% echo $DISPLAY
:0
% su
Passwort:
# whoami
On (19/11/07 09:00) Andreas Vinsander wrote:
Hi!
It seems like perl-5.8.8-r3 introduced a new place
(/usr/lib/vendor_perl) for perl modules, but the perl-cleaner utility
didn't catch that properly. Now all perl modules/utilities (like genlop)
are broken for me.
What is the easiest way
On (14/11/07 11:34) Rafael Barrera Oro wrote:
Hello, i have apollon installed along with the fasttrack, arez, gnutella and
openft plugins. Nevertheless, only Gnutella seems to connect.
¿Does this sounds familiar to anyone?
As always, any help, will be appreciated.
best wishes
Rafael
On (13/11/07 17:18) fei huang wrote:
On Nov 2, 2007 4:08 AM, Aaron Cordova [EMAIL PROTECTED] wrote:
The package netqmail allows me to specify the value QMAIL_CONF_SPLIT
before it compiles. How do I actually set this value? How do I set optional
flags when I build a package? Do i need to
On (12/11/07 21:49) James wrote:
Alex Schuster wonko at wonkology.org writes:
emerge -a --depclean
and a little bit of manual removals, did the trick.
thx,
James
--
[EMAIL PROTECTED] mailing list
Hi,
When running 'revdep-rebuild' you could use -i option together with
On (08/11/07 10:14) Hemmann, Volker Armin wrote:
On Donnerstag, 8. November 2007, Alexander Skwar wrote:
Hello!
This morning, I upgraded to glibc 2.7 from whatever used to be current
in ~x86 before that (2.6.).
Do you guys do a emerge -e system, ie. recompile everything, after
On (08/11/07 05:23) Miernik wrote:
Hello everyone. I use Debian GNU/Linux since ten years, on 32-bit Intel
machines. And now I bought a new computer, my first 64-bit machine. Its
a Gigabyte GA-M57SLI-S4 mobo, with a AMD Athlon 64 X2 4000+ CPU, so I
thought that on such powerful beast, Gentoo
Hi,
On (08/11/07 07:02) Miernik wrote:
Rumen Yotov [EMAIL PROTECTED] wrote:
The graphical installer is known to fail sometimes (not always :-)
Many people prefer the (old) install method - using a terminal.
I was not using a graphical installer, I went to a terminal (text
console
On (12/10/07 15:03) Mario Ignacio Rodríguez Cortés wrote:
Hi users!!!
Well, i'm trying to install apache-2.2.4 but this package have a
dependency with apr-1.2.8, then when i try to emerge apache in
the
compilation of this package in certain point this
On (11/10/07 11:30) [EMAIL PROTECTED] wrote:
Rumen Yotov [EMAIL PROTECTED] writes:
euse -i hal
Thanks, but it doesn't show anything interesting here:
euse -i hal
global use flags (searching: hal)
[+ CD ] hal - Enable
On (11/10/07 18:01) Henk Boom wrote:
On 11/10/2007, Rumen Yotov [EMAIL PROTECTED] wrote:
$quse hal - gives you all packages with 'hal' flag support.
To check for all installed apps currently not using hal:
1.put hal in USE= (/etc/make.conf)
2.run #emerge -N world -p
What if a package
On (10/10/07 19:44) [EMAIL PROTECTED] wrote:
I received this message after emerging hal:
* The HAL daemon needs to be running for certain applications to
* work. Suggested is to add the init script to your start-up
* scripts, this should be done like this :
* `rc-update add hald default`
On Tue, 9 Oct 2007 16:22:10 -0300
Rafael Barrera Oro [EMAIL PROTECTED] wrote:
Hello, i'd like to ask you people if anyone has succeded in
installing a postgresql version greater than 8.0.13 because i tried
(unmasking by adding ~x86 to ACCEPT_KEYWORDS) and ran into a lot of
problems. I don't
Hi,
On Fri, 5 Oct 2007 21:55:15 -0300
Fernando Antunes [EMAIL PROTECTED] wrote:
On 10/5/07, Fernando Antunes [EMAIL PROTECTED] wrote:
Alfredo, I´ve in my home PC automount for pendrive with XFCE and I
didn´t use ivman.
Tonight, when I go home, I´ll post another message explaining how I
Rafael Barrera Oro написа:
Hello, i am trying to install 2007.0 on a x86 system using the minimal
CD. However, since i have other stuff to do, my idea is to install via
a gentoo station i already have properly set up and working fine.
¿how can i connect to the pc which booted from the livecd
Hi,
Rafael Barrera Oro написа:
I already did that (started ssh, passwd root, etc), in fact, i can
connect from to the computer that booted from the livecd to the my
gentoo box, but not the other way around.
Have you started sshd (/etc/init.d/sshd start as root).
Could check with: netstat -t |
On Sun, 23 Sep 2007 23:53:11 +0200
Volker Armin Hemmann [EMAIL PROTECTED] wrote:
On Sonntag, 23. September 2007, Marc Redmann wrote:
boot from cd
Don't want to start a flame war here, but why should he use
reiserfs ???
it was an example. And I am free to choose any fs I want for
On (19/09/07 22:45) Miroslav Puda wrote:
On 13:13 Wed 19 Sep , [EMAIL PROTECTED] wrote:
On Wed, Sep 19, 2007 at 08:05:16PM +0100, Mick wrote:
When I launch mplayer from aterm I get this type of symbols on my
terminal:
I get them too, and have always chalked it up to some
On (14/09/07 22:02) Grant Edwards wrote:
On 2007-09-14, Grant Edwards [EMAIL PROTECTED] wrote:
I need to create a statically linked program that uses libtcl,
but I only seem to have a shared libtcl. The ebuild for
dev-lang/tcl doesn't appear to have any sort of static/dynamic
USE flags.
Hi,
On (09/09/07 12:30) Arturo 'Buanzo' Busleiman wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Steen Eugen Poulsen wrote:
Gentoo doesn't have any default limits, so I don't know how this rumor
came about.
It's not a Gentoo-specific rumor, Steen.
Some time ago had such
Hi,
On (06/09/07 15:36) Marco Antônio da Veiga wrote:
CFLAGS=-march=k8 -O2 -pipe -fomit-frame-pointer
Try the following:
EXTRA_ECONF=-mmx -sse emerge qemu-softmmu -a
Assuming your processor is k8 compatible.
...SKIP...
HTH. Rumen
--
[EMAIL PROTECTED] mailing list
On (06/09/07 01:36) Marco Antônio da Veiga wrote:
Hi,
I'm trying to have qemu running, but compiling qemu-softmmu with
gcc-3.4.6fails.
This is the error:
i686-pc-linux-gnu-gcc -Wall -O2 -g -fno-strict-aliasing -I. -I..
On (03/09/07 14:28) William Xu wrote:
Hi, why the `work' subdir under /var/tmp/.. has this sort of permission
setting:
,
| drwx-- 3 portage portage 80 Sep 3 10:43 work
`
This way, it seems rather difficult for a non-root user to access
them. Currently I'm trying to debug
Hi,
On (03/09/07 16:13) William Xu wrote:
Rumen Yotov [EMAIL PROTECTED] writes:
May be because this directory is meant to be used by portage only.
Since it's just a tmp dir, only allowing portage user to read seems too
strict.
May be 'yes' but it's kind of security measure - so while
On (28/08/07 22:31) Lingyun Yang wrote:
Hi all,
I am using a program doing scientific calculations,
it requires liblapack.so.3. But where is it ?
I have installed lapack-atlas 3.7.1,
no this lib found.
Thanks.
Best regards,
Lingyun
Hi,
Checked on Google - there're
Hi,
Marc Joliet wrote:
Am Montag, den 27.08.2007, 11:58 +0100 schrieb Neil Bothwick:
On Fri, 24 Aug 2007 22:29:58 +0200, Marc Joliet wrote:
Yeah, I should have set noauto the instant I found out about it. Any
other recommended mount options? Right now they are
William Kenworthy wrote:
On Fri, 2007-08-24 at 14:13 +0200, Alex Schuster wrote:
Hi there!
But then, there are things like the expat update. This happens seldomly,
but if it does, it's rather annoying. Maybe I have become too comfortable
I'm all for comfort - I remember
On (15/08/07 22:49) Colleen Beamer wrote:
Hi,
I have a situation that, before, kind of bugged me but I was able to
deal with it. However, now I've added another wrinkle to the situation.
I have a usb external hard drive attached to my computer. It's an
Iomega and has a power switch. In
Hi,
On (13/08/07 17:22) Grant wrote:
Three of my systems are having package management trouble. One of the
systems does this after revdep-rebuild:
All ebuilds that could satisfy =sys-devel/gcc-4.1.1 have been masked.
Please post the output of: eix sys-devel/gcc
and: ls -ld
On (13/08/07 22:32) Allan Gottlieb wrote:
At Mon, 13 Aug 2007 21:15:20 -0400 Dan Cowsill [EMAIL PROTECTED] wrote:
On 8/13/07, Dan Cowsill [EMAIL PROTECTED] wrote:
Wow. Well, contrary to my expectations, my system (after emerge
-uDNav world) exhibits every one of the problems that you
Hi,
On (13/08/07 23:59) Allan Gottlieb wrote:
At Tue, 14 Aug 2007 05:49:20 +0300 Rumen Yotov [EMAIL PROTECTED] wrote:
On (13/08/07 22:32) Allan Gottlieb wrote:
At Mon, 13 Aug 2007 21:15:20 -0400 Dan Cowsill [EMAIL PROTECTED] wrote:
On 8/13/07, Dan Cowsill [EMAIL PROTECTED] wrote
Hi,
On (13/08/07 21:50) Grant wrote:
Three of my systems are having package management trouble. One of the
systems does this after revdep-rebuild:
All ebuilds that could satisfy =sys-devel/gcc-4.1.1 have been masked.
Please post the output of: eix sys-devel/gcc
# eix
On (11/08/07 08:55) Mick wrote:
On Sunday 29 July 2007 17:46, Rumen Yotov wrote:
On (29/07/07 18:05) Jakob wrote:
Anything else I could try? How do I troubleshoot it?
Have a look at the log files is always a good way to troubleshoot ;-)
what does dmesg and /var/log/messages say
On (30/07/07 15:39) Kevin Lacquement wrote:
On Mon, 30 Jul 2007 16:27:16 -0400
Eric Martin [EMAIL PROTECTED] wrote:
enable crypt in the use flags for mozilla-thunderbird
Crypt is enabled in my use flags. The problem isn't on the initial install -
enigmail installed with no problems.
On (30/07/07 18:35) Kevin Lacquement wrote:
On Tue, 31 Jul 2007 03:25:21 +0300
Rumen Yotov [EMAIL PROTECTED] wrote:
Hi,
Try exchanging thunderbird with enigmail in your /var/lib/portage/world.
Do it manually, no problem as one of the duo is in world (+crypt
USE-flag).
HTH. Rumen
On (29/07/07 18:05) Jakob wrote:
Anything else I could try? How do I troubleshoot it?
Have a look at the log files is always a good way to troubleshoot ;-)
what does dmesg and /var/log/messages say about eth0 or 8139?
--
[EMAIL PROTECTED] mailing list
Hi,
Could also try the latest
On (04/07/07 15:26) Stefán István wrote:
Hello!
I got the following error:
* Failed Running automake !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/gnome-base/gnome-vfs-2.16.3-r1/temp/automake-24490.out
!!! ERROR: gnome-base/gnome-vfs-2.16.3-r1
Richard Cox wrote:
On Mon, Jun 04, 2007 at 04:52:26PM -0500, Randy Barlow wrote:
I've set up my desktop machine using LVM over software raid, and
although I like it I'm getting weary of the complication of the setup
for a simple desktop system. What I would like to do is get the same
On Fri, 04 May 2007 08:48:20 -0400
Colleen Beamer [EMAIL PROTECTED] wrote:
david wrote:
What happens when you;
emerge -pv xorg-x11
What do you mean, What happens? It emerges, no error messages.
Regards,
Colleen
Hi,
Don't have the OP mail-thread, but just a suggestion -
AIT Gentoo User написа:
Dear list friends,
i tried to update one of my gentoo box.it gave me following notice. it
tried to unmerge kde-env but there is no like ebuild in de portage. so
what will be the problem. please help me resolve this.
NOTICE
--
[ebuild N]
Hi,
On Mon, 16 Apr 2007 16:52:42 +0100
Hamie [EMAIL PROTECTED] wrote:
On Sunday 15 April 2007 07:37, Dale wrote:
Norberto Bensa wrote:
Daniel da Veiga wrote:
On 4/15/07, Norberto Bensa [EMAIL PROTECTED] wrote:
Not true. 2006.1 doesn't boot on my hardware.
...
We (I) need
Hi Neil,
On Thu, 5 Apr 2007 08:52:12 +0100
Neil Bothwick [EMAIL PROTECTED] wrote:
Hello Rumen Yotov,
This happens with all binary-source ;) packages, like java,
firefox-bin, openoffice-bin etc.
They have been made to work on quite all systems (despite existing
libraries).
Use
Hi,
On Thu, 5 Apr 2007 15:59:21 +1200
Bogo Mipps [EMAIL PROTECTED] wrote:
On Thu, 05 Apr 2007, you wrote:
everytime I run revdep-rebuild, it wants to rebuild
dev-java/swt-3.2-r2 . When I do this, it emerges fine, but
revdep-rebuild still complains.
It states, that
broken
On Thu, 29 Mar 2007 15:44:20 +0800
Buffalo Dickens [EMAIL PROTECTED] wrote:
Hi all! I am not familiar with openssl at all. Here I got a problem.
My Windows 2003 can not (or I can not) accomplish the task of
generating a private key file and a csr file. That holds up my
process of going on
On Mon, 26 Mar 2007 16:59:31 -0400
A. R. [EMAIL PROTECTED] wrote:
Howdy,
This is just a FYI, after upgrading my kernel to 2.6.20, my firewall
was broken. I was using firestarter but had the same problem
trying to use guarddog. Traced it down to missing the iptables
state module.
On Wed, 21 Mar 2007 11:37:17 +0100
Timo Bergemann [EMAIL PROTECTED] wrote:
Hello all,
This is my first mail to this mailing list, so I hope it is the right
one.
I have a problem compiling kopete-3.5.5-r2 into my system. Additional
I have to say that I am mainly try to compile kde-meta.
On Tue, 13 Feb 2007 15:35:27 + (UTC)
Grant Edwards [EMAIL PROTECTED] wrote:
What am I doing wrong?
# emerge thunar
Calculating dependencies... done!
Emerging (1 of 1) xfce-base/thunar-0.8.0-r2 to /
* Thunar-0.8.0.tar.bz2
MD5 ;-) ...
[ ok ]
*
On Tue, 23 Jan 2007 12:07:46 +
Neil Bothwick [EMAIL PROTECTED] wrote:
On Mon, 22 Jan 2007 18:12:07 -0800 (PST), Eric Bohn wrote:
Using Portage you're putting yourself at the mercy of any Joe Schmoe
with a proxy connection to a Gentoo server that wants to compromise
your machine.
Hi,
James wrote:
Hello,
Trying to run a routine upgrade I get this error:
hecking for Informix support... no
checking for InterBase support... yes
checking for isc_detach_database in -lfbclient... no
checking for isc_detach_database in -lgds... no
checking for isc_detach_database in
On Sun, 21 Jan 2007 01:49:33 + (UTC)
James [EMAIL PROTECTED] wrote:
hello,
I have a system using this card:
NV11 [GeForce2 MX/MX 400]
and I want to use this card:
NV34 [GeForce FX 5200]
to hopefully get more perfomance on 3D applications.
Can I just swap the hardware or do I
On Wed, 17 Jan 2007 22:49:35 +0800
Chuanwen Wu [EMAIL PROTECTED] wrote:
The error is:
make[3]: *** No rule to make target `../scintilla/libscintilla.a',
needed by `test-scintilla'. Stop.
make[3]: *** Waiting for unfinished jobs
mv -f .deps/LexVB.Tpo .deps/LexVB.Po
mv -f
Hi,
On Sun, 31 Dec 2006 03:09:24 +0100
frank [EMAIL PROTECTED] wrote:
Hi,
I've posted this former
After the start of the blender bulid (after the sources are unpacked)
I have to (from another shell):
cp /var/tmp/portage/blender-2.41-r1/work/blender/extern/bFTGL/include/*
David Relson написа:
After emerging dbus-1.0.2 on my x86 system, I've run
rc-update add dbus default to make sure dbus will run in the future
/etc/init.d/dbus start to start it
/etc/init.d/dbus reload to be sure it's running
revdep-rebuild - as suggested by the build notes
Now, _every_
Kumar Golap написа:
Hi All,
I've been trying to upgrade gnome...but i keep stumbling on evolution
failing to compile
I've re-emerged evolution-data-server etc...it does not help...What am
I missing ?
This is the bit of the failing compilation :
bORBit-2.so -lm /usr/lib64/libgmodule-2.0.so
Grant Edwards написа:
Is there an ati-drivers ebuild that will install a Radeon
9200/9250 compatible driver under 2.6.18? The most recent ATI
driver that works with the 9200 series is 8.28.8, but it (and
older versions) won't compile out-of-the-box under 2.6.18.
I downloaded the ATI 8.28.8
Uwe Thiem написа:
On 26 December 2006 18:03, Alessandro Cipriani wrote:
HI, i'm alessandro. I'm a newbie of gentoo. I've installed the system from
stage 1 on a Asus Laptop. I've a problem: i don't know how i can play wma
songs with kaffeine. The output error is:
xine: found input plugin :
Raymond Lewis Rebbeck написа:
On Friday, 22 December 2006 0:30, Wolfgang Liebich wrote:
Hi,
I tried to install qemu on my system. The command I used (and the
response) were:
emerge -v --ask --tree --newuse qemu
--newuse implies --update... adding --update to options.
These are the packages
Randy Barlow написа:
On Fri, 2006-12-22 at 00:44 +1030, Raymond Lewis Rebbeck wrote:
You need gcc 3.x to compile Qemu.
So how does one go about this? Would emerge gcc-3.4.4 (or whatever the
version you want to use) do the trick? Is there anything else that
would need to be done? As in,
Grant wrote:
I have squirrelmail-1.4.8 installed and working on my server, and
portage wants to install 1.4.9a in a new slot. How will the slots
work in this context?
- Grant
Hi,
Just checked and don't see any SLOTS in squirrelmail, even a SLOT var.
HTH.Rumen
smime.p7s
Description: S/MIME
Daniel Iliev wrote:
james wrote:
Hello,
A couple of week ago, I installed a system using 2006.1 Livecd
To day, I took a look at the /etc/group file and found 'gentoo'
listed in several groups, including wheel
(wheel audio cdrom usb users games) to be specific.
I do not remmeber this
Hi,
Used my desktop kernel-config as a base for a laptop config.
Quite all is OK, except console/text-mode scrolling.
The text scrolls till the end of screen then scrolls only on the last
line. No such problems under X.
Any hints will be appreciated. Haven't looked very much in
kernel-config, just
Hemmann, Volker Armin wrote:
On Saturday 16 September 2006 15:02, Mick wrote:
On 13/09/06, Hemmann, Volker Armin [EMAIL PROTECTED]
wrote:
On Wednesday 13 September 2006 05:03, Brett I. Holcomb wrote:
Most BIOS programs save the existing BIOS so they need somewhere to
write to.
I never
On Fri, 15 Sep 2006 09:11:56 +0100
Neil Bothwick [EMAIL PROTECTED] wrote:
On Fri, 15 Sep 2006 12:30:33 +0800 (CST), Stephen Liu wrote:
What DVD/CD burning packages will you recommend to emerge on Gentoo
other than Gnomebaker and K3b. TIA
That depends on the type of discs you want to
On Fri, 15 Sep 2006 09:27:06 +0200
Bo Ørsted Andresen [EMAIL PROTECTED] wrote:
On Friday 15 September 2006 07:52, Rumen Yotov wrote:
Just a sidenote here, if knowing you'll have to rebuild after expat
downgrade you could run revdep-rebuild --library libexpat.so.1
before and save the order
Hi,
On Wed, 13 Sep 2006 12:36:45 + (UTC)
James [EMAIL PROTECTED] wrote:
Ryan Tandy tarpman at gmail.com writes:
Michael Crute wrote:
USE=-* hardened pic ncurses ssl crypt berkdb tcpd pam perl
python readline
You could omit pic here IIRC (on a hardened profile) hardened
includes
David Grant wrote:
On 9/13/06, *Bo Ørsted Andresen* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
On Wednesday 13 September 2006 18:24, David Grant wrote:
revdep-rebuild keeps wanting to re-emerge gcc-4.1.1 over and over
again. Is
anyone else seeing this?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jerry McBride wrote:
On Sunday 10 September 2006 22:45, Richard Fish wrote:
On 9/10/06, Jerry McBride [EMAIL PROTECTED] wrote:
There's hardly anyone sharing it
Just let it send in pending for awhile...eventually one of the main
seeders will
On Fri, 2006-09-08 at 16:18 +, James wrote:
Rumen Yotov rumen at qrypto.org writes:
I did some quick searches and couldn't find any ISOs for that disc,
Hi James,
Did you tried passing some ON/OFF options when booting with
install-minimal-2006.1 (i mean gentoo acpi=off doscsi
On Fri, 2006-09-08 at 10:13 -0700, kashani wrote:
Timothy A. Holmes wrote:
Cool -- that makes life very good indeed -- as far as I know the driver
configurations are essentially identical so that out to be easy -- the
processors are identical
I've got two sets of hardware, one has LSI
On Thu, 31 Aug 2006 12:08:20 -0700
David Grant [EMAIL PROTECTED] wrote:
If I re-emerge hotplug, for example, I get a big fat warning about
hotplug's init.d script being dead and buried. When I look at my elog
directory I don't see anything there, nor do I get an email about it.
Am I doing
On Sun, 27 Aug 2006 23:26:57 +0800 (CST)
Stephen Liu [EMAIL PROTECTED] wrote:
Hi Neil,
Shutdown involves unmounting the drive, and I recommended syncing
before unmounting.
The USB enclosure will be automatically mounted/umounted.
Whether on the script includes syncing once before
Mark Knecht wrote:
On 7/30/06, Arturo 'Buanzo' Busleiman [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mark Knecht wrote:
NOTE: I currently do this be editing the grub file itself but I'm
looking for something more sophisticated since I'd like my wife to be
able
Walter Dnes wrote:
Before I make a fool of myself for unnecessarily re-opening
http://bugs.gentoo.org/show_bug.cgi?id=131151 (allegedly fixed a couple
of weeks ago), am I doing anything glaringly wrong? I just finished
doing an emerge sync and the only package that fails a deep world update
1 - 100 of 412 matches
Mail list logo
