Re: [gentoo-user] root password gremlin
John Jolet schrieb: On Nov 19, 2005, at 12:39 AM, Alexander Skwar wrote: Patrick McLean schrieb: Running a system withoug pam is a rather strange thing to do on a modern Linux system, and I can think of very few reasons to do it. What do you need PAM for, when there's basically just one (human) user on the system and the system acts as a consumer (ie. no servers)? Why add the complexity of PAM? Where's the gain - in *THAT* scenario? I'm not sure about you, but I can think of MANY times over my career when I set up a box to do just one thing or for just one person and down the road all of a sudden, I needed another thing or another person. Fine. That's a different scenario. Please stick to the scenario I mentioned. Retrofitting pam onto a running, configured system is not something I'd care to attempt. Having pam on from the beginning, if you don't fiddle with the defaults, poses no extra complexity. And what do you gain by using PAM? Again: Stick to the scenario I mentioned. I think, that it is not an unusual scenario - I tend to think, that it'll fit most home users and also most desktop machines in a *SMALL* office enviroment. Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to create a pgp signature
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 gpg --gen-key But you won't be able to use it with the gmail interface. I personally use it with thunderbird (enigmail extension). El Nino wrote: dear friends, can anybody tell me methode to create my own pgp signature? -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFDgFu9Ct0ZF9kLPvYRApeXAJ93iZbR+y+yrdPnAGYrPQDDnzkU5ACeIH2W V//gUYLUkynl8Dpq6B7dDbQ= =1qs4 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] confused udev?
On Sat, 19 Nov 2005, Richard Fish wrote: According to the dmesg output you posted earlier, your memory stick is not partitioned. This is ok, some are, some are not. You can confirm this by taking a look at /proc/partitions when it is inserted, or the output of fdisk -l. So, only getting /dev/plextor_memstick is probably correct, and you should mount that, not plextor_memstick1. I'm out of office for the weekend, so I can't insert the stick and confirm. But the stick is partitioned with a unique partition with vfat. I tried to mount it and mount gave the no such device complaint. But I may be forgetting something. What about the kernel config? I posted the file as you suggested. Does it look OK? Thanks, Jorge -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schrieb: Alexander Skwar wrote: What do you need PAM for, when there's basically just one (human) user on the system and the system acts as a consumer (ie. no servers)? Why add the complexity of PAM? Where's the gain - in *THAT* scenario? Learning. The whole point of using free, open source software. if you do not want to get messy, then use windows. Anyway, if this user chosed all of his use flags, then he is probably willing to LEARN. What kind of nonsense is that? I suppose, that you'd find it appropriate to use LDAP for a 1 user machine? Sorry, but that's absolute bullshit. Furhter, especially on Windows, there are *WAY* too many things to get messy with. Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 abhay wrote: What? What kind of theory is that? Sorry, I didn't explain myself clearly. I didn't mean to say that use gnu/linux/oss for the purpose of learning. However you can't argue that one gets to learn a lot from simply using it. So, to clarify: Learning is the answer to the question, No it's not. The answer to the question: Why DON'T refrain from using unneeded software and systems? is NOT: Learning. The answer is: Do refrain fromusing systems that you don't need. And for the majority of systems, this would include PAM. Eg. if it's sufficient to use /etc/{passwd,shadow} as a password/user database, then there's just no reason to use another (in this case clearly: useless) layer on top of that. It just adds unneeded and unwanted complexity for no gain. So: Why use PAM on systems that fit to the scenario I laid out? Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] divx4linux
James Colby schrieb: List Members - I have another question. I can't seem to find the divx4linux package anymore. It's been dumped. It's broken. Nobody fixes it. It's been superseded by xvid or ffmpeg. -- Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Holly Bostick wrote: So no, I do wish I could agree with you (it would certainly be a more comfortable environment for me than what we actually have in terms of geek-friendliness), but I just cannot. You are probably right... :P - 12 years of floss made me believe otherwise, specially where I live, Argentina, where it seems that even the most clueless windows user that switches/tries linux, when first asking a question on a forum, mailing list, whatever, they usually append I wish I learn enough so I can help other people, too. I've worked for SuSE, I'm core-team developer for ututo, plus my since 12-to-24 linuxism... you get my picture: i'm just so geek-nerd-hacker-like I tend to believe most people want to learn. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgGBTAlpOsGhXcE0RAgXMAJkBV1/4407/H2qU/xEKuaLkDh3obQCfSI+k hix+Pa5dR6HSjhsI51Xs52k= =JKc/ -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] revdep-rebuild fails
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 James Colby wrote: Thanks, revdep-rebuild did give me the list of files that would not link, and equery belongs FILENAME tells me that the files are part of the kde-base/kdelibs-3.3.2-r7 package. Is there a way for me to find out which packages on my system depend on kdelibs-3.3.2-r7? equery depends '=kde-base/kdelibs-3.3.2-r7' Try equery -h, it does lots of things. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgGCqAlpOsGhXcE0RAqifAJ49W+O76gRb60FGZ7lCe4L7UoiFwACdHkFJ yh/gEkfJVuzVoIyfh70v790= =T0lO -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: So: Why use PAM on systems that fit to the scenario I laid out? Because, in the very near time, your configuration will be obsoleted by an upgrade, and probably stop working altogether. It's standard already, I guess. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgGH+AlpOsGhXcE0RAs5/AJ4hY9PpTYM1CePQ1qGrI7lzpIDRdwCfdpag DnKV7qrWnNiNZ/tr0sHap3Q= =kMRR -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to create a pgp signature
You're answer was to a different question. Ralph Slooten schrieb: gpg --gen-key Wrong. can anybody tell me methode to create my own pgp signature? That's the question. Alexander Skwar Posting out-of-order makes it easy to follow context. -s -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to create a pgp signature
El Nino schrieb: dear friends, can anybody tell me methode to create my own pgp signature? The man page of gnupg will tell: man gpg It's also in the help output: LC_ALL=C gpg --help | grep 'make a' Alexander Skwar -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: root password gremlin
On Sunday 20 November 2005 12:27, Alexander Skwar wrote: What kind of nonsense is that? I suppose, that you'd find it appropriate to use LDAP for a 1 user machine? Sorry, but that's absolute bullshit. I don't think it's a good example: you can set up a Samba box, with a LDAP backend with just 2 or 3 *unix* (administrative) users and hundreds user into LDAP database. Nscd and PAM do the rest of collage. So PAM can be of much use for a few user machine (ok, acting as a server...). That said I'm quite neutral about PAM, maybe it's just overkill for a desktop, maybe it's simply too complex to get rid of it for a standard user... Ciao Francesco -- Linux Version 2.6.12-gentoo-r9, Compiled #2 Wed Aug 24 18:43:16 CEST 2005 One 2.2GHz AMD Athlon 64 Processor, 2GB RAM, 4325.37 Bogomips Total aemaeth -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: So: Why use PAM on systems that fit to the scenario I laid out? Because, in the very near time, your configuration will be obsoleted by an upgrade, and probably stop working altogether. No, it won't, I'd think. But, why DO you think so? It's standard already, I guess. No, it isn't. Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: root password gremlin
Francesco Talamona schrieb: On Sunday 20 November 2005 12:27, Alexander Skwar wrote: What kind of nonsense is that? I suppose, that you'd find it appropriate to use LDAP for a 1 user machine? Sorry, but that's absolute bullshit. I don't think it's a good example: you can set up a Samba box, with a LDAP backend with just 2 or 3 *unix* (administrative) users and hundreds user into LDAP database. Nscd and PAM do the rest of collage. Yes, for such a scenario, I'd of course use PAM as some sort of layer - no doubt at all! So PAM can be of much use for a few user machine (ok, acting as a server...). We're talking about a non-server machine: | What do you need PAM for, when there's basically just one | (human) user on the system and the system acts as a consumer | (ie. no servers)? Why add the complexity of PAM? Where's | the gain - in *THAT* scenario? See what's in the 2nd ()? That said I'm quite neutral about PAM, maybe it's just overkill for a desktop, maybe it's simply too complex to get rid of it for a standard user... No, it's not too complex to get rid off - if you leave it away from the beginning. I totally agree, that it's hard to convert a non-PAM system to PAM - and the other way is also hard. Alexander Skwar -- gentoo-user@gentoo.org mailing list
[gentoo-user] cisco-vpnclient-3des (4.6.03.0190-r1) and gentoo-sources (2.6.14-r2)
Hi, After upgrading to gentoo-sources 2.6.14-r2 and cisco-vpnclient-3des 4.6.03.0190-r1 the cisco-vpnclient installs in the wrong directory. Here is a snippet from emerge cisco-vpnclient-3des # emerge cisco-vpnclient-3des Calculating dependencies ...done! emerge (1 of 1) net-misc/cisco-vpnclient-3des-4.6.03.0190-r1 to / snip * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found sources for kernel version: * 2.6.14-gentoo-r2 snip Merging net-misc/cisco-vpnclient-3des-4.6.03.0190-r1 to / snip /lib/modules/0/CiscoVPN/cisco_ipsec.o /lib/modules/0/CiscoVPN/cisco_ipsec.ko /lib/modules/0/CiscoVPN/cisco_ipsec.mod.c /lib/modules/0/CiscoVPN/cisco_ipsec.mod.o Should this not be /lib/modules/2.6.14-gentoo-r2/CiscoVPN/... ? Any suggestions on what could be wrong? Regards, -- Dan Johansson, http://www.dmj.nu *** This message is printed on 100% recycled electrons! *** pgp6zh9fYLHMp.pgp Description: PGP signature
Re: [gentoo-user] root password gremlin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: No, it won't, I'd think. But, why DO you think so? Excessive parts of a working system are curretnly opt-dependant on PAM, but most also use PAM to get specific functionality they do not want to provide. It just a guess, but I'm sure this trend will get to parts of a minimal system, too, because of the minimalism required. Applications will provide auth functionality over PAM, in a centralized library, instead that providing that functionality on their own. Less size. Less complexity. More code-reusing. Just a guess. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgHNVAlpOsGhXcE0RAj6RAJ9c6mPP0+qUFFrifh287/6vnR57PwCePsDF ytFxeZbcOpglnNoZ5luq40g= =MnfX -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: It's standard already, I guess. No, it isn't. Why do you think so? - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgHN7AlpOsGhXcE0RAp9IAJ4nv4rIYWIM3EpWH+RJzEoWniucQACaAonr DSvh/IzgNnTpnDvPYcuYIQI= =0dT+ -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cisco-vpnclient-3des (4.6.03.0190-r1) and gentoo-sources (2.6.14-r2)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Dan Johansson wrote: /lib/modules/0/CiscoVPN/cisco_ipsec.o /lib/modules/0/CiscoVPN/cisco_ipsec.ko /lib/modules/0/CiscoVPN/cisco_ipsec.mod.c /lib/modules/0/CiscoVPN/cisco_ipsec.mod.o that 0 in the middle let's check the ebuild. It looks like a badly-typed variable. find /usr/portage -iname '*cisco-vpnclient-3des*4.6.03.0190-r1*ebuild' -exec joe {} \; Line 70 in the ebuild: insinto /lib/modules/0/CiscoVPN shouldn't that be... insinto /lib/modules/${KV_FULL}/CiscoVPN or something of that sort? - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgHWVAlpOsGhXcE0RAs5eAJ91pi5f3eJ7av3WYGXLsOW++pX5igCgghkS Chi6kvFedeovcW3oO3sNplk= =v53Y -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: No, it won't, I'd think. But, why DO you think so? Excessive parts of a working system are curretnly opt-dependant on PAM, That's wrong. Most support optional PAM support, but for most it's not a requirement. but most also use PAM to get specific functionality they do not want to provide. Yep. And if those functionalities aren't needed, why use PAM? To learn? I don't think so... It just a guess, but I'm sure this trend will get to parts of a minimal system, A minimal system is one, that does NOT use PAM. PAM is another layer and thus not minimal. If what you're writing were true, we'd still use /etc/passwd like on HP-UX 11.00. Ie. no /etc/shadow. their own. Less size. Less complexity. More code-reusing. Just a guess. Wrong. PAM adds complexity. Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: It's standard already, I guess. No, it isn't. Why do you think so? Standard is something, for which you don't need additional software. For PAM, you need additional software, as PAM is already additional software. -- Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cisco-vpnclient-3des (4.6.03.0190-r1) and gentoo-sources (2.6.14-r2)
On Sunday 20 November 2005 13.58, Dan Johansson wrote: Hi, After upgrading to gentoo-sources 2.6.14-r2 and cisco-vpnclient-3des 4.6.03.0190-r1 the cisco-vpnclient installs in the wrong directory. Here is a snippet from emerge cisco-vpnclient-3des # emerge cisco-vpnclient-3des Calculating dependencies ...done! emerge (1 of 1) net-misc/cisco-vpnclient-3des-4.6.03.0190-r1 to / snip * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found sources for kernel version: * 2.6.14-gentoo-r2 snip Merging net-misc/cisco-vpnclient-3des-4.6.03.0190-r1 to / snip /lib/modules/0/CiscoVPN/cisco_ipsec.o /lib/modules/0/CiscoVPN/cisco_ipsec.ko /lib/modules/0/CiscoVPN/cisco_ipsec.mod.c /lib/modules/0/CiscoVPN/cisco_ipsec.mod.o Should this not be /lib/modules/2.6.14-gentoo-r2/CiscoVPN/... ? Just a reply to my own posting, Found bug 112817 on bugs.gentoo.org (http://bugs.gentoo.org/show_bug.cgi?id=112817). -- Dan Johansson, http://www.dmj.nu *** This message is printed on 100% recycled electrons! *** pgpIQu209yj3K.pgp Description: PGP signature
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: Standard is something, for which you don't need additional software. For PAM, you need additional software, as PAM is already additional software. ? - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgHkSAlpOsGhXcE0RAnq8AJ9aMKWkTqhRlupPxfUH4CU/urB2hQCfW/PL 075hxRWjXrPXtBohthnCEAs= =Opn7 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: /etc/passwd like on HP-UX 11.00. Ie. no /etc/shadow. /etc/shadow was provided by an additional package and libraries. Just like PAM. Shadow changed from being a security measure to be an auth storage backend. As a storage backend, it needs libraries to access it. That's where PAM enters. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgHlsAlpOsGhXcE0RAophAJ4uayd+KB3MVIB/3hT8O6tc/fheMgCfZGj0 1HszDYiX/bxf2lIFcp6hknI= =NpjA -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cisco-vpnclient-3des (4.6.03.0190-r1) and gentoo-sources (2.6.14-r2)
On Sunday 20 November 2005 14.09, Arturo 'Buanzo' Busleiman wrote: Dan Johansson wrote: /lib/modules/0/CiscoVPN/cisco_ipsec.o /lib/modules/0/CiscoVPN/cisco_ipsec.ko /lib/modules/0/CiscoVPN/cisco_ipsec.mod.c /lib/modules/0/CiscoVPN/cisco_ipsec.mod.o that 0 in the middle let's check the ebuild. It looks like a badly-typed variable. find /usr/portage -iname '*cisco-vpnclient-3des*4.6.03.0190-r1*ebuild' -exec joe {} \; Line 70 in the ebuild: insinto /lib/modules/0/CiscoVPN shouldn't that be... insinto /lib/modules/${KV_FULL}/CiscoVPN or something of that sort? Thanks, I've added your comment to Bug 112817 (http://bugs.gentoo.org/show_bug.cgi?id=112817) -- Dan Johansson, http://www.dmj.nu *** This message is printed on 100% recycled electrons! *** pgpoKgMLt4UfA.pgp Description: PGP signature
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: Standard is something, for which you don't need additional software. For PAM, you need additional software, as PAM is already additional software. ? Optional things aren't standard. They are optional. PAM is optional. You don't need it - at least not for basic setups. -- Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: /etc/passwd like on HP-UX 11.00. Ie. no /etc/shadow. /etc/shadow was provided by an additional package and libraries. Just like PAM. Shadow changed from being a security measure to be an auth storage backend. Yep. As a storage backend, it needs libraries to access it. That's where PAM enters. You don't need PAM to access /etc/shadow. There are different ways. You have the option to use PAM to access /etc/shadow. But there's no requirement to do so. Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schreef: Alexander Skwar wrote: /etc/passwd like on HP-UX 11.00. Ie. no /etc/shadow. /etc/shadow was provided by an additional package and libraries. Just like PAM. Shadow changed from being a security measure to be an auth storage backend. As a storage backend, it needs libraries to access it. That's where PAM enters. No, that's where PAM *can* enter, but it *need* not-- eix shadow * sys-apps/shadow Available versions: 4.0.4.1-r4 4.0.5-r2 4.0.5-r3 ~4.0.6-r1 ~4.0.7 ~4.0.7-r1 4.0.7-r3 4.0.7-r4 ~4.0.11.1-r1 ~4.0.11.1-r2 ~4.0.12 ~4.0.13 Installed: 4.0.7-r4 Homepage:http://shadow.pld.org.pl/ Description: Utilities to deal with user accounts eix pam * app-vim/pam-syntax Available versions: 20030818 Installed: none Homepage: http://www.vim.org/scripts/script.php?script_id=735 Description: vim plugin: PAM configuration syntax highlighting * dev-perl/Authen-PAM Available versions: 0.14 ~0.16 Installed: none Homepage:http://www.cs.kuleuven.ac.be/~pelov/pam/ Description: Interface to PAM library * kde-base/kdebase-pam Available versions: 4 5 6 Installed: none Homepage:http://www.kde.org Description: pam.d files used by several KDE components. * net-mail/checkpassword-pam Available versions: 0.97 0.99 Installed: none Homepage:http://checkpasswd-pam.sourceforge.net/ Description: checkpassword-compatible authentication program w/pam support * net-www/mod_auth_pam Available versions: 1.1.1 ~1.1.1-r1 Installed: none Homepage:http://pam.sourceforge.net/mod_auth_pam/ Description: PAM authentication module for Apache2 * sys-apps/pam-login Available versions: 3.14 3.17 ~4.0.11.1-r2 ~4.0.12 Installed: none Homepage:http://www.thkukuk.de/pam/pam_login/ Description: Based on the sources from util-linux, with added pam and shadow features * sys-auth/pam_ldap Available versions: 156 ~161 ~164 ~167 171 176 176-r1 ~178 178-r1 180 Installed: none Homepage:http://www.padl.com/OSS/pam_ldap.html Description: PAM LDAP Module * sys-auth/pam_ssh_agent Available versions: ~0.1 0.2 ~0.2-r1 Installed: none Homepage:http://pam-ssh-agent.sourceforge.net/ Description: PAM module that spawns a ssh-agent and adds identities using the password supplied at login * sys-auth/pam_usb Available versions: 0.3.1 0.3.2 Installed: none Homepage:http://www.pamusb.org/ Description: A PAM module that enables authentication using an USB-Storage device (such as an USB Pen) through DSA private/public keys. * sys-auth/pam_smb Available versions: 1.9.9-r1 2.0.0_rc5 ~2.0.0_rc6 Installed: none Homepage:http://www.csn.ul.ie/~airlied/pam_smb/ Description: The PAM SMB module, which allows authentication against an NT server. * sys-auth/pam_ssh Available versions: 1.9 1.91 ~1.91-r1 Installed: none Homepage:http://pam-ssh.sourceforge.net/ Description: Uses ssh-agent to provide single sign-on * sys-auth/pam_dotfile Available versions: 0.7 ~0.7-r1 Installed: none Homepage: http://www.stud.uni-hamburg.de/users/lennart/projects/pam_dotfile/ Description: pam module to allow password-storing in $HOME/dotfiles * sys-auth/pam_passwdqc Available versions: 0.7.5 ~1.0.2 Installed: none Homepage:http://www.openwall.com/passwdqc/ Description: Password strength checking for PAM aware password changing programs * sys-auth/pam_mysql Available versions: ~0.4.7 0.5 ~0.6.0 Installed: none Homepage:http://pam-mysql.sourceforge.net/ Description: pam_mysql is a module for pam to authenticate users with mysql * sys-auth/pam_krb5 Available versions: 1.0 1.0-r1 ~20030601 ~20030601-r1 Installed: none Homepage:http://www.fcusack.com/ Description: Pam module for MIT Kerberos V * sys-auth/pam_pwdfile Available versions: ~0.99 Installed: none Homepage:http://cpbotha.net/pam_pwdfile.html Description: PAM module for authenticating against passwd-like files. * sys-auth/pam_require Available versions: ~0.6 Installed: none Homepage: http://www.splitbrain.org/Programming/C/pam_require/ Description: Allows you to require a special group or user to access a service. * sys-libs/pam Available versions: 0.77-r6 ~0.77-r8 0.78-r2 0.78-r3 Installed: none
Re: [gentoo-user] root password gremlin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: You don't need PAM to access /etc/shadow. There are different ways. That's why PAM can be skipped. I know that. Please tell me about the alternatives, as I'm obviously missing important information here. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgH5qAlpOsGhXcE0RArVSAJ0Ugb2Ul6dmEouMppe7YgADAz7ssgCeIy+y fKfKV115dWgRfDrauugmXXE= =KRDc -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: Optional things aren't standard. They are optional. PAM is optional. You don't need it - at least not for basic setups. It is NOW optional. I'm sure this will change, that's why I recommend to try it now that there is time to still enhance it LOTS. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgH70AlpOsGhXcE0RAnVTAJ0a4TaNnhpGIR/5GfcObkXw+m2kGgCePUys dmraL474EHQWFYK/JYzcn34= =khHS -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Dinosaur Matrox Mystique: corruption
I think Hans's idea makes sense, since it was the file storm.c that was patched in the first place by others. I'll have to wait, because I've started a new gentoo install due to problems detecting the /boot partition in my machine. I botched an attempt to move data from that partition to the / partition. I have been able to do 1064x768 at 16 or 24 bits. Even 1100something x something worked, perhaps not as perfectly. Thank you for so many great answers, in great depth. I will see what comes about in a day or two. It's tricky to do this on a dialup. Alan DavisOn 11/20/05, Walter Dnes [EMAIL PROTECTED] wrote: On Fri, Nov 18, 2005 at 11:57:12PM -0600, kashani wrote The Mystique has 4mb of RAM upgradeable to 8mb IIRC. It was likely0 new in '95-'96 as I scraped together $140 to by the slightly better Matrox Millennium used off Ebay in '96. The Mystique did not do well at higher resolutions, which is why I went with the Millennium. I'd shoot for 800x600 and go from there.1024x768 at 24bits (16 million colours) should be doable.--Walter Dnes [EMAIL PROTECTED] In linux /sbin/init is Job #1My musings on technology and security at http://tech_sec.blog.ca--gentoo-user@gentoo.org mailing list
Re: [gentoo-user] *** glibc detected *** malloc(): memory corruption (fast): 0x081fb2c1 ***
On Sat, 19 Nov 2005 08:02:55 -0500 fire-eyes [EMAIL PROTECTED] wrote: | Okay. My difference is that I see this with apps that I didn't write, | which others don't have issues with. But I haven't seen it in a while, | seems to come and go. Doesn't make much sense, and I have checked my | hardware repeatedly. Well... Here's the thing... If you're using an app which triggers that message, then the app is broken. However, were detection not turned on, the app would instead behave randomly in such a way that it might carry on working. So whilst you could turn off the detection, it's probably not a good idea because you'd end up with random, hard to trace memory corruption... -- Ciaran McCreesh : Gentoo Developer (Look! Shiny things!) Mail: ciaranm at gentoo.org Web : http://dev.gentoo.org/~ciaranm signature.asc Description: PGP signature
Re: [gentoo-user] *** glibc detected *** malloc(): memory corruption (fast): 0x081fb2c1 *** [SOLVED]
On Sat, 19 Nov 2005 08:16:19 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: | Actually, I solved the error for my situation last night - I just | forgot to write it in as SOLVED. I had created a temporary pointer, | then assigned the temporary pointer to a variable I was planning to | return from a method, then deleted the temporary pointer. I'm not | used to using pointers. I've always heard that you should always | delete your pointers when you're done with them and for some reason I | thought the delete keyword deleted the pointer instead of the memory | it was pointing at... Consider using boost::shared_ptr instead. You don't have to worry about delete or exception-checking then. -- Ciaran McCreesh : Gentoo Developer (Look! Shiny things!) Mail: ciaranm at gentoo.org Web : http://dev.gentoo.org/~ciaranm signature.asc Description: PGP signature
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman schreef: Holly Bostick wrote: As you see, all the relevant programs that *can* use PAM (which is *optional*) do *not* do so on my system. I do not need PAM authentication, and I do not use PAM authentication. As far as I know, my system runs fine (or at least has no PAM-related issues). I never said PAM was needed :P - I'm defending its usage. :) Well, defend it, then :-). Why should I-- who has further had (very) bad experiences with the use of PAM, give it another try, when my system clearly runs without it, which suggests I have no need for it? What overwhelming benefit can I gain, that will offset my previous bad experience and make what I (because of the bad experience) must consider a risking my system worthwhile? Holly -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Holly Bostick wrote: Well, defend it, then :-). :) Why should I-- who has further had (very) bad experiences with the use of PAM, give it another try, when my system clearly runs without it, which suggests I have no need for it? I'd like to know why. I'm very interested in what your problems were, really. What overwhelming benefit can I gain, that will offset my previous bad experience and make what I (because of the bad experience) must consider a risking my system worthwhile? The first impression is the one that counts. You will probably never change your mind, and I fully and sincerely understand/comprehend you. - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgIvJAlpOsGhXcE0RAmkGAJwLh38R7aNEALtYVAqBUNulUSwJWACcCW7R kFHOg0waqR/w3EK04kjxXC8= =lgeD -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
Arturo 'Buanzo' Busleiman schrieb: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: Optional things aren't standard. They are optional. PAM is optional. You don't need it - at least not for basic setups. It is NOW optional. I'm sure this will change, Well, I'm sure it won't. On low end embedded systems, you just don't need it. And when discussing base requirements, it should be made sure that even the low end is still supported. Also on normally sized systems, there just is no requirement for it - as long as the requirements are simple enough (eg. LDAP? Go PAM! Database? Go PAM!). But on consumer systems, and that's what we're talking about!, you won't need PAM. Not now, not in the future. Alexander Skwar -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alexander Skwar wrote: Also on normally sized systems, there just is no requirement for it - as long as the requirements are simple enough (eg. LDAP? Go PAM! Database? Go PAM!). But on consumer systems, and that's what we're talking about!, you won't need PAM. Not now, not in the future. Let's settle this here, then. We've both provided enough arguments, both pro and against our points of view :) Nice discussion, anyway! - -- Arturo Buanzo Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgI9DAlpOsGhXcE0RAkNtAJ41K7mlxQcJ3QDxE/zNwM1LqfuergCeKl4Y 6ZPV6ZtTIP2H45O2NViiyzs= =b1R6 -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
On Sunday 20 November 2005 14:49, Arturo 'Buanzo' Busleiman wrote: Alexander Skwar wrote: Optional things aren't standard. They are optional. PAM is optional. You don't need it - at least not for basic setups. It is NOW optional. I'm sure this will change, that's why I recommend to try it now that there is time to still enhance it LOTS. well, pam is buggy (ever logged out because of a X crash and not able to play any sounds anymore? That was pam) pam has a long history of security problems pam is not easy to configure and error prone. every added layer adds to the risks. All that I read said, that pam was a temporary solution some years ago - and that the chances are big that it will fade into obscurity in the next ones. For single-user setups it is as needed as a wart. I am angry with myself, that I installed it, without thinking. Learning? Where? And why? Most setups don't need it. And the ones that need some more complex authentification, can get it in other ways. -- gentoo-user@gentoo.org mailing list
[gentoo-user] DNS lookup fails on a server; no changes since it worked
I have a server out on the net, and it's been up for a week or two. I've been on and off it all week long, but as of last night, DNS didn't seem to work for it. Network connectivity worked, because not only could I ssh *in*, but I could also contact the outside network as long as I used something in the hosts file or an IP address. Adding more (known good) DNS servers to /etc/resolv.conf doesn't seem to help. DNS was working recently, and I haven't changed anything since then. A reboot didn't help (I would have just stopped started networking... but, well, all I have is ssh, so...). One very weird thing is that it can apparently send mail to outside network addresses. It could send to my gmail account fine last night, though it seemed to take a while (20 minutes or so, when normally it's instantaneous). I don't have gmail or google in my /etc/hosts. I've seen elsewhere to look at the output of iptables, but it has never been installed. The contents of /etc/nsswitch.conf are at http://vlack.com/vlack/lol/ nsswitch.conf. I'm getting nowhere, and I have no idea why. Thanks. - Micah -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] regarding PAM [WAS: root password gremlin]
On Sunday 20 November 2005 15:24, Hemmann, Volker Armin wrote: On Sunday 20 November 2005 14:49, Arturo 'Buanzo' Busleiman wrote: Alexander Skwar wrote: Optional things aren't standard. They are optional. PAM is optional. You don't need it - at least not for basic setups. It is NOW optional. I'm sure this will change, that's why I recommend to try it now that there is time to still enhance it LOTS. well, pam is buggy (ever logged out because of a X crash and not able to play any sounds anymore? That was pam) pam has a long history of security problems pam is not easy to configure and error prone. every added layer adds to the risks. All that I read said, that pam was a temporary solution some years ago - and that the chances are big that it will fade into obscurity in the next ones. For single-user setups it is as needed as a wart. Bingo... I manage a herd of laptops... well... I'm done from 100 to 22... but PAM isn't on a single one of them and life hasn't been happier. :') I am angry with myself, that I installed it, without thinking. Learning? Where? And why? Most setups don't need it. And the ones that need some more complex authentification, can get it in other ways. -- ** Registered Linux User Number 185956 FSF Associate Member number 2340 since 05/20/2004 Join me in chat at #linux-users on irc.freenode.net Buy an Xbox for $149.00, run linux on it and Microsoft loses $150.00! 12:51pm up 63 days, 4:16, 3 users, load average: 3.12, 3.06, 3.01 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] root password gremlin
Arturo 'Buanzo' Busleiman wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Holly Bostick wrote: Why should I-- who has further had (very) bad experiences with the use of PAM, give it another try, when my system clearly runs without it, which suggests I have no need for it? I'd like to know why. I'm very interested in what your problems were, really. Do a search on the forums for problems with pam. Read the resulting fifty odd threads. kashani -- gentoo-user@gentoo.org mailing list
[gentoo-user] any SSH guru on the list
I'm having problem logging into my Gentoo server from Knoppix booted PC Connection between two Gentoo servers works fine. I narrow it to the authorization method ssh is trying to use. When I'm logging from Getnoo workstation the authorization ssh is trying to use: service ssh-connection method publickey When I try to login from Knoppix booted PC, ssh is trying to use: ssh-connection method keyboard-interactive Here is debug-log from Knoppix (failed) vs Gentoo (successful) login attempt: Gentoo (success) debug1: userauth-request for user joseph service ssh-connection method none debug1: attempt 0 failures 0 Failed none for joseph from 68.148.84.225 port 61399 ssh2 debug1: userauth-request for user joseph service ssh-connection method publickey debug1: attempt 1 failures 1 debug1: test whether pkalg/pkblob are acceptable debug1: temporarily_use_uid: 1000/100 (e=0/0) debug1: trying public key file /home/joseph/.ssh/authorized_keys debug1: matching key found: file /home/joseph/.ssh/authorized_keys, line 1 Found matching DSA key: 2a:0f:a0:d5:43:c0:a3:30:78:e4:30:df:fb:18:dc:17 debug1: restore_uid: 0/0 Postponed publickey for joseph from 68.184.83.225 port 61399 ssh2 Connection closed by 68.184.83.225 debug1: do_cleanup Knoppix (failed): debug1: userauth-request for user joseph service ssh-connection method none debug1: attempt 0 failures 0 Failed none for joseph from 68.148.84.225 port 61398 ssh2 debug1: userauth-request for user joseph service ssh-connection method keyboard-interactive debug1: attempt 1 failures 1 debug1: keyboard-interactive devs debug1: auth2_challenge: user=joseph devs= debug1: kbdint_alloc: devices '' Failed keyboard-interactive for joseph from 68.184.83.225 port 61398 ssh2 Connection closed by 68.184.83.225 debug1: do_cleanup What file control ssh-connection method? -- #Joseph -- gentoo-user@gentoo.org mailing list
[gentoo-user] DVB-T errors
Hello! I use a new Pinnacle i300 card with analog and dvb-t tuner. I have no problem with the analog tuner, but if I try to use the dvb-t tuner after about 20 seconds it stops to work. I read that from dmesg: [ 456.905661] saa7134[0]: mt352_pinnacle_init called [ 460.907225] saa7134[0]: mt352_pinnacle_init called [ 468.754747] mt352_read_register: readreg error (reg=1, ret==-5) [ 469.698328] mt352_read_register: readreg error (reg=0, ret==-5) [ 470.717146] mt352_read_register: readreg error (reg=0, ret==-5) The program is kaffeine 0.7.1 and the kernel is the 2.6.14-r2 preempt What can I do? Thanks, Luigi -- Public key GPG(0x073A0960) on http://keyserver.linux.it/ pgpfCS6eEw0kA.pgp Description: PGP signature
Re: [gentoo-user] any SSH guru on the list
On Sun, 2005-11-20 at 15:22 -0500, Willie Wong wrote: snip What file control ssh-connection method? man ssh_config look for PreferredAuthentications Thanks for the pointer. According to the manual the default for ssh PreferredAuthentications is: hostbased,publickey,keyboard-interactive,password So it should work but for some reason or another Knoppix is not defaulting to publickey; even though I have public key in /knoppix/.ssh/authorized_keys Adding to /etc/ssh/ssh_config PreferredAuthentications publickey has no effect. Do I need to log-out and log-in in order to take it effect? -- #Joseph -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: udev: lost dvd
Neil Bothwick neil at digimed.co.uk writes: Do the (2) layer NEC devices, such as the NEC ND-3540A work on linux? It works, whether it works in DL mode I have no idea as I haven't tried it. DL discs are so expensive. Is there anything special about the way DL discs are written, or does the drive recognise the medium and write accordingly? I have no clue. Oh well at 42 dollars, I ordered one. If it does dual layer writing, then cool, but I'd suspect dual layer reading is standard now for movie DVDs. Thanks for the recommendation on NEC. James -- gentoo-user@gentoo.org mailing list
[gentoo-user] OT - Good GUI debugger that can be used for Qt apps
What's a good gui debugger that works on Qt c++ files? I'm getting a segmentation fault in my program and I don't really want to go through each individual file (there are only eight, but I'm a wimp) and search for it, because I lose track of which variables have been initialized and which haven't. I've tried to be careful this time, but at least one crept through. I'd like to be able to step through the program (without waiting through the internal code of the Qt objects and find where this problem is... -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] any SSH guru on the list
Joseph schrieb: Thanks for the pointer. According to the manual the default for ssh PreferredAuthentications is: hostbased,publickey,keyboard-interactive,password So it should work but for some reason or another Knoppix is not defaulting to publickey; even though I have public key in /knoppix/.ssh/authorized_keys What are the permissions for / /home /home/knoppix /home/knoppix/.ssh /home/knoppix/.ssh/authorized_keys? has no effect. Do I need to log-out and log-in in order to take it effect? No. Alexander Skwar -- gentoo-user@gentoo.org mailing list
[gentoo-user] kernel 2.6.14.2 and problem with ACPI (lost interrupt)
Hi, I've decided to switch to new kernel. When I've rebooted the system start to type error messages and newver stoped. The message is: hdc: lost interrupt irq 15: nobody cared (try booting with the irqpool option) I found the problem is ACPI, but I don't want to turn off the ACPI support. The configuration works fine for 2.6.11.11 kernel. Please, could someone help me ??? Thanks Pat -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] divx4linux
Here is the relevant gentoo-dev thread. http://marc.theaimsgroup.com/?l=gentoo-devm=112940871726601w=2 On Sun, 20 Nov 2005 12:36:49 +0100 Alexander Skwar wrote: James Colby schrieb: List Members - I have another question. I can't seem to find the divx4linux package anymore. It's been dumped. It's broken. Nobody fixes it. It's been superseded by xvid or ffmpeg. -- Alexander Skwar -- gentoo-user@gentoo.org mailing list -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT - Good GUI debugger that can be used for Qt apps
On 11/20/05, Michael Sullivan [EMAIL PROTECTED] wrote: What's a good gui debugger that works on Qt c++ files? I'm getting a kdevelop -Richard -- gentoo-user@gentoo.org mailing list
[gentoo-user] MythTV compile error
List - Thanks for all of your help this weekend. I am having another issue. When I try to upgrade mythTV I am getting the attached error (I hope the attachment comes through). Does anyone have any ideas on what could be causing this? Thanks Again, James lcddevice.cpp: At global scope: lcddevice.cpp:564: error: `QPtrList' was not declared in this scope lcddevice.cpp:564: error: syntax error before `' token lcddevice.cpp: In member function `void LCD::outputText(...)': lcddevice.cpp:569: error: `QPtrListIterator' undeclared (first use this function) lcddevice.cpp:569: error: syntax error before `' token lcddevice.cpp:578: error: `it' undeclared (first use this function) lcddevice.cpp: In member function `void LCD::assignScrollingText(QString, QString, int)': lcddevice.cpp:676: warning: comparison between signed and unsigned integer expressions lcddevice.cpp:711: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp: In member function `void LCD::startMusic(QString, QString)': lcddevice.cpp:720: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp: In member function `void LCD::startChannel(QString, QString, QString)': lcddevice.cpp:747: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp: At global scope: lcddevice.cpp:752: error: `QPtrList' was not declared in this scope lcddevice.cpp:752: error: syntax error before `' token lcddevice.cpp: In member function `void LCD::startGeneric(...)': lcddevice.cpp:755: error: syntax error before `' token lcddevice.cpp:768: error: `textItems' undeclared (first use this function) lcddevice.cpp:771: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp: At global scope: lcddevice.cpp:792: error: `QPtrList' was not declared in this scope lcddevice.cpp:792: error: syntax error before `' token lcddevice.cpp: In member function `void LCD::startMenu(...)': lcddevice.cpp:796: error: `menuItems' undeclared (first use this function) lcddevice.cpp:809: error: `app_name' undeclared (first use this function) lcddevice.cpp:811: error: syntax error before `' token lcddevice.cpp:843: error: `popMenu' undeclared (first use this function) lcddevice.cpp:844: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp:848: error: syntax error before `' token lcddevice.cpp:851: error: `itTemp' undeclared (first use this function) lcddevice.cpp:871: warning: comparison between signed and unsigned integer expressions lcddevice.cpp:873: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp:965: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp: In member function `void LCD::beginScrollingMenuText()': lcddevice.cpp:978: error: syntax error before `' token lcddevice.cpp:989: warning: comparison between signed and unsigned integer expressions lcddevice.cpp:1003: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp: In member function `void LCD::scrollMenuText()': lcddevice.cpp:1012: error: syntax error before `' token lcddevice.cpp:1047: warning: comparison between signed and unsigned integer expressions lcddevice.cpp:1051: error: no matching function for call to `QTimer::start(int, bool)' /usr/include/qt4/QtCore/qtimer.h:58: error: candidates are: void QTimer::start(int) /usr/include/qt4/QtCore/qtimer.h:60: error: void QTimer::start() lcddevice.cpp:1058: warning: comparison between signed and unsigned integer expressions lcddevice.cpp:1094: warning: comparison
Re: [gentoo-user] kernel 2.6.14.2 and problem with ACPI (lost interrupt)
pat wrote: Hi, I've decided to switch to new kernel. When I've rebooted the system start to type error messages and newver stoped. The message is: hdc: lost interrupt irq 15: nobody cared (try booting with the irqpool option) Have you tried booting with the irqpool option as the messages say (whatever the irqpool option is)? m. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] divx4linux
On 11/20/05, Nick Rout [EMAIL PROTECTED] wrote: Here is the relevant gentoo-dev thread. http://marc.theaimsgroup.com/?l=gentoo-devm=112940871726601w=2 Excellent, thanks for the link. Very helpful -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] kernel 2.6.14.2 and problem with ACPI (lost interrupt)
Have you tried booting with the 'irqpool' kernel option as suggested by the error message? --Peter signature.asc Description: This is a digitally signed message part
Re: [gentoo-user] kernel 2.6.14.2 and problem with ACPI (lost interrupt)
On Sun, 20 Nov 2005 22:53:24 +, b.n. wrote pat wrote: Hi, I've decided to switch to new kernel. When I've rebooted the system start to type error messages and newver stoped. The message is: hdc: lost interrupt irq 15: nobody cared (try booting with the irqpool option) Have you tried booting with the irqpool option as the messages say (whatever the irqpool option is)? m. Yes, I did. But I've made a mistake, the option is irqpoll not irqpool :-\ So I'm sorry about this. With this option there's only once the error message and the system boots. But I want to ask if someone knows why this happen, I want to use swsuspend and ACPI and finally I don't want to lose data. Thanks for help. Pat -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] kernel 2.6.14.2 and problem with ACPI (lost interrupt)
The message is: hdc: lost interrupt irq 15: nobody cared (try booting with the irqpool option) Have you tried booting with the irqpool option as the messages say (whatever the irqpool option is)? Yes, I did. But I've made a mistake, the option is irqpoll not irqpool :-\ So I'm sorry about this. With this option there's only once the error message and the system boots. But I want to ask if someone knows why this happen, I want to use swsuspend and ACPI and finally I don't want to lose data. I can't see why something should happen to your data (unless you throw your computer out of the window in anger and frustration...) Anyway... you mean that, if you put the irqpool option, ACPI does not work? m. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] divx4linux
On Sun, 20 Nov 2005 16:54:54 -0500 James Colby wrote: On 11/20/05, Nick Rout [EMAIL PROTECTED] wrote: Here is the relevant gentoo-dev thread. http://marc.theaimsgroup.com/?l=gentoo-devm=112940871726601w=2 Excellent, thanks for the link. Very helpful no problems. there is a lot of stuff getting the biff from portage for similar reasons. search for last rites here and you will get the relevant threads. http://marc.theaimsgroup.com/?l=gentoo-devr=1w=2 -- Nick Rout [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] emerge sync
On Sat, 2005-11-19 at 20:25 +0100, Cédric FINANCE wrote: Nagatoro wrote: Try and download a big file with ftp and see how the throughput is. This should show if it's a modem/ISP problem or a rsync one. I fetched vmware-workstation and got 180kB/s. Downloading a single file isn't necessarily going to do the same stress test as an rsync trying to download 10+ files... Is it always with the same rsync server or have you tried different ones? Also, someone mentioned the channel, did you check your AP and card are using the same channel? (This may be a long shot...) Did you try a different driver for ndiswrapper? Did you try the same rsync server with a different card? I know you don't think its the card, but I would still rule it out if I could. I don't know what else to suggest - if its the rsync server then don't use it! If not, then try playing around with different hardware / drivers until you isolate the problem... HTH, -- Iain Buchanan [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] baselayout broke my system
On Sat, 2005-11-19 at 21:08 -0800, Grant wrote: Hello everyone, I updated to something like baselayout pre9-r2 a few days ago and I immediately started getting this on boot up right after Checking root filesystem: I checked /etc/fstab and it looked fine. I tried upgrading to baselayout-1.12.0_pre10-r1 with the same results. I was able to fix it by downgrading back to baselayout-1.12.0_pre9-r1. Should I just keep trying to upgrade when a new version is released and then roll back if it still breaks? That what I'd do! Also: post your results on bugzilla (under an existing bug if there is one, or make a new one) so the devs know what the issue are. This is occasionally the fun you get with ~x86 :) -- Iain Buchanan [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT - Good GUI debugger that can be used for Qt apps
On Sun, 2005-11-20 at 14:19 -0700, Richard Fish wrote: On 11/20/05, Michael Sullivan [EMAIL PROTECTED] wrote: What's a good gui debugger that works on Qt c++ files? I'm getting a kdevelop -Richard I copied my code into a KDevelop project and built it. I then placed a breakpoint on int main (int argv, char** argc) and selected Start from the Debug menu. It immediately gave me a dialog that said Program received SIGABRT. Aborted. It did not tell me where my Segfault came from. Is there a way to get it to tell me, or at least allow me to step through my program without instantly shutting down? -- gentoo-user@gentoo.org mailing list
[gentoo-user] how to save ps file from OpenOffice writer?
Hello. So far openoffice is the only application that I know that could not directly export PS format, or print to a 'generic PS printer'. I am having a lot of troubles trying to generate PS file for my documents. Usually I have to go to a Windows computer and print to the 'Adobe PS Printer', and take the file back in a usb stick to my Linux computer. The usual gnome 'generic PS printer' simply does not exist as a printer of choice in the print dialogue box. How do you guys manage to make PS files? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
On Sunday 20 November 2005 19:18, 張韡武 wrote: Hello. So far openoffice is the only application that I know that could not directly export PS format, or print to a 'generic PS printer'. I am having a lot of troubles trying to generate PS file for my documents. Usually I have to go to a Windows computer and print to the 'Adobe PS Printer', and take the file back in a usb stick to my Linux computer. The usual gnome 'generic PS printer' simply does not exist as a printer of choice in the print dialogue box. How do you guys manage to make PS files? You could try exporting as a PDF, then running pdf2ps (from app-text/ghostscript) on it pgpsqUCVqG0rQ.pgp Description: PGP signature
[gentoo-user] Re: Webserer monitoring tools
Colin Copley cmc.75 at btinternet.com writes: Does anyone have any advice about monitoring software/apache modules that I can use to check how many connections, connection speed, resources (CPU) so I can monitor how the webservers doing, if it's getting overloaded etc. jffnms is an excellent monitoring package for all sorts of server resouces, routers and other snmp based devices. It's masked (in testing), so you \have to add this line to your '/etc/portage/package.keywords' file net-analyzer/jffnms ~x86 It a bit challenging to get set up and happy, but definately the best monitoring package I've seen. YMMV, James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
Open the print dialog, tick the Print to file box and then print. A file save dialog pops up. It prints in ps format. OO has done it this way for years ... BillK On Sun, 2005-11-20 at 19:32 -0800, John Myers wrote: On Sunday 20 November 2005 19:18, 張韡武 wrote: Hello. So far openoffice is the only application that I know that could not directly export PS format, or print to a 'generic PS printer'. I am having a lot of troubles trying to generate PS file for my documents. Usually I have to go to a Windows computer and print to the 'Adobe PS Printer', and take the file back in a usb stick to my Linux computer. The usual gnome 'generic PS printer' simply does not exist as a printer of choice in the print dialogue box. How do you guys manage to make PS files? You could try exporting as a PDF, then running pdf2ps (from app-text/ghostscript) on it -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
W.Kenworthy wrote: Open the print dialog, tick the Print to file box and then print. A file save dialog pops up. It prints in ps format. OO has done it this way for years ... I just wish to further know if this PS file contains anything related to the printer, anything printer-specific. E.g does it make difference if I choose printer A or printer B before I click 'Print to fiile' and get the PS file. As far as I know doing things this way on Windows is dangerous. E.g. print to a random PS printer (a laserject for example) and get the print-to-file PS file, chances these files are very specific to that PS printer and opens wrongly in gsview. You have to use the 'Adobe PS Printer' which produce 'standard' PS file. BillK On Sun, 2005-11-20 at 19:32 -0800, John Myers wrote: On Sunday 20 November 2005 19:18, 張韡武 wrote: Hello. So far openoffice is the only application that I know that could not directly export PS format, or print to a 'generic PS printer'. I am having a lot of troubles trying to generate PS file for my documents. Usually I have to go to a Windows computer and print to the 'Adobe PS Printer', and take the file back in a usb stick to my Linux computer. The usual gnome 'generic PS printer' simply does not exist as a printer of choice in the print dialogue box. How do you guys manage to make PS files? You could try exporting as a PDF, then running pdf2ps (from app-text/ghostscript) on it -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: [Iptables related] How to make one machine only talk on loc lan
A. Khattri [EMAIL PROTECTED] writes: But preventing updates (espec. if they're Windoze boxes) seems like a bad idea to me. It can be done by running IE thru a proxy on my linux box. Then it only sees local address. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
This is a gentoo list - nobody here really cares what OO on windows does :) However, I produce pdf's all the time using standard tools from the linux OO generated postcript files and the doze users seem happy. The postscript is pretty standard it seems, my only beef is that more control (resolution, DPI etc) isn't available. BillK On Mon, 2005-11-21 at 12:28 +0800, Zhang Weiwu wrote: W.Kenworthy wrote: Open the print dialog, tick the Print to file box and then print. A file save dialog pops up. It prints in ps format. OO has done it this way for years ... I just wish to further know if this PS file contains anything related to the printer, anything printer-specific. E.g does it make difference if I choose printer A or printer B before I click 'Print to fiile' and get the PS file. As far as I know doing things this way on Windows is dangerous. E.g. print to a random PS printer (a laserject for example) and get the print-to-file PS file, chances these files are very specific to that PS printer and opens wrongly in gsview. You have to use the 'Adobe PS Printer' which produce 'standard' PS file. BillK On Sun, 2005-11-20 at 19:32 -0800, John Myers wrote: On Sunday 20 November 2005 19:18, 張韡武 wrote: Hello. So far openoffice is the only application that I know that could not directly export PS format, or print to a 'generic PS printer'. I am having a lot of troubles trying to generate PS file for my documents. Usually I have to go to a Windows computer and print to the 'Adobe PS Printer', and take the file back in a usb stick to my Linux computer. The usual gnome 'generic PS printer' simply does not exist as a printer of choice in the print dialogue box. How do you guys manage to make PS files? You could try exporting as a PDF, then running pdf2ps (from app-text/ghostscript) on it -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
W.Kenworthy wrote: This is a gentoo list - nobody here really cares what OO on windows does :) However, I produce pdf's all the time using standard tools from the linux OO generated postcript files and the doze users seem happy. The postscript is pretty standard it seems, my only beef is that more control (resolution, DPI etc) isn't available. after a few test it looks obvious OO on gentoo suffer from the samiliar problem as oo on Windows (sorry to mension Windows again). On my gentoo there is only one printer installed on cups that is a LaserJet. Later I discovered all PS files I provided are grayscale, and there is no possibility to switch to color. On one other gentoo computer the PS output is colorful thanks to the color printer installed. This is not perfect but nevertheless I managed to make PS files. I only need to take the ODT file to my another gentoo computer who has color printer and make the PS, this is much simpler then asking Windows user for help. Certainly I could share my color printer. Is there an even better (perfect) way? -- gentoo-user@gentoo.org mailing list
[gentoo-user] about console resolution
Hi, My screen resolution outside of X is 720x400. I don't know in which file this is set and i want to change it because whenever splash starts it tries to load 720x400.cfg file. I've tried to change it on grub.conf file but nothing happens, it always switches back to 720x400. I've tried these in grub.conf file just to be sure that resolution works: kernel /kernel-2.6.14-gentoo-r2 root=/dev/hda4 vga=ask - The scan result returned a maximum resolution of 132x60 kernel /kernel-2.6.14-gentoo-r2 root=/dev/hda4 video=vesafb:[EMAIL PROTECTED] - It switches to 720x400 (for all video=vesafb:resolutions) In kernel I've enabled these: Device Drivers - Graphics Support - *Support for frame buffer devices * VESA VGA graphics support VESA driver type (vesafb-tng) ([EMAIL PROTECTED]) VESA default mode *nVidia Framebuffer Support [*] Enable DDC Support Console display driver support - [*] Video mode selection support * Framebuffer Console support [*] Support for the framebuffer splash Can you help me? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [SOLVED] any SSH guru on the list
On Sun, 2005-11-20 at 21:53 +0100, Alexander Skwar wrote: Joseph schrieb: Thanks for the pointer. According to the manual the default for ssh PreferredAuthentications is: hostbased,publickey,keyboard-interactive,password So it should work but for some reason or another Knoppix is not defaulting to publickey; even though I have public key in /knoppix/.ssh/authorized_keys What are the permissions for / /home /home/knoppix /home/knoppix/.ssh /home/knoppix/.ssh/authorized_keys? [snip] Alexander Skwar Solved! In my case it was a logical error, it appears had copied Public-Key from from server I was logging into to the computer I was logging from. And it suppose to be other way around. I've learned my lesson now. -- #Joseph -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
Zhang Weiwu wrote: after a few test it looks obvious OO on gentoo suffer from the samiliar problem as oo on Windows (sorry to mension Windows again). On my gentoo there is only one printer installed on cups that is a LaserJet. Later I discovered all PS files I provided are grayscale, and there is no possibility to switch to color. On one other gentoo computer the PS output is colorful thanks to the color printer installed. This is not perfect but nevertheless I managed to make PS files. I only need to take the ODT file to my another gentoo computer who has color printer and make the PS, this is much simpler then asking Windows user for help. Certainly I could share my color printer. Is there an even better (perfect) way? You shouldn't need a physical printer attached in order to configure a dummy postscript color printer driver for cups. Zac -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] about console resolution
On Mon, 2005-11-21 at 08:28 +0200, sempsteen wrote: Hi, My screen resolution outside of X is 720x400. I don't know in which file this is set and i want to change it because whenever splash starts it tries to load 720x400.cfg file. I've tried to change it on grub.conf file but nothing happens, it always switches back to 720x400. I've tried these in grub.conf file just to be sure that resolution works: kernel /kernel-2.6.14-gentoo-r2 root=/dev/hda4 vga=ask vga= is not for vesafb-tng! - The scan result returned a maximum resolution of 132x60 this is characters (wide) and lines (long), not resolution! kernel /kernel-2.6.14-gentoo-r2 root=/dev/hda4 video=vesafb:[EMAIL PROTECTED] - It switches to 720x400 (for all video=vesafb:resolutions) try video=vesafb:[EMAIL PROTECTED] note the 24 colour depth, and the 60 refresh rate. Once this works, you can try higher numbers. In kernel I've enabled these: *nVidia Framebuffer Support not sure, but I don't think you need this one - ie. choose either vesafb-tng _or_ nvidia framebuffer... I'm guessing, but 720x400 may be something the nvidia framebuffer is determining, and overriding vesafb-tng... dunno... Can you help me? I hope so :^) -- Iain Buchanan [EMAIL PROTECTED] -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how to save ps file from OpenOffice writer?
configure a dummy colour printer in cups. Despite what I said, I do admin some windows machines that print via an adobe driver to a gentoo print server. Different versions of doze, but the same adobe print driver (all installed from the same installation file) - and one, and only one refuses to print in colour! I'll try and configure a dummy colour printer in that machine and see if it corrects the problem. Thanks for starting me thinking again on this one. BillK On Mon, 2005-11-21 at 14:19 +0800, Zhang Weiwu wrote: W.Kenworthy wrote: This is a gentoo list - nobody here really cares what OO on windows does :) However, I produce pdf's all the time using standard tools from the linux OO generated postcript files and the doze users seem happy. The postscript is pretty standard it seems, my only beef is that more control (resolution, DPI etc) isn't available. after a few test it looks obvious OO on gentoo suffer from the samiliar problem as oo on Windows (sorry to mension Windows again). On my gentoo there is only one printer installed on cups that is a LaserJet. Later I discovered all PS files I provided are grayscale, and there is no possibility to switch to color. On one other gentoo computer the PS output is colorful thanks to the color printer installed. This is not perfect but nevertheless I managed to make PS files. I only need to take the ODT file to my another gentoo computer who has color printer and make the PS, this is much simpler then asking Windows user for help. Certainly I could share my color printer. Is there an even better (perfect) way? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] PostgreSQL Interfaces
Am Montag, 21. November 2005 05:00 schrieb ext Brett I. Holcomb: I am looking for a GUI interface to PostgreSQL and have found several open source ones available. I'd like some comments on what others use and the good, bad, and ugly of what you use. kpogre doesn't compile against libpqxx 2.5.5, you have to use 2.5.1. pgadmin3 segfaults at startup. So I use psql. Bye... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net pgpyoQACpRy4A.pgp Description: PGP signature