Hi people,
I have installed the latest gentoo linux distribution and I don't know
what I am missing in my installation, specially the last gentoo
installation worked for me fine.
At booting I recive the error message:
Block device /dev/sda5 is not a valid root device.
Hard disk is a SATA one,
(/home/tamer/fritz/src/fwlanusb.o) is not supported
How am I able to solve this?! I looked in the kernel configuration where
the setting elf32 bit support for non 64 bit libraries is enabled.
For any advise, I would thank you kindly.
Tamer Higazi
Hi people!
Has anybody of you ever bootstrapped / built Liunux from the scratch
with the Intel C++ compiler?! I would love to know the process itself,
if it was a difficulty step building linux from the scratch with a
different compiler (implemetnation to get it run).
For any answer
Thanks
--
gentoo-user@gentoo.org mailing list
the official gentoo xorg guide, and nothing changed.
Any ideas?!
for any I help I would kindly thank you.
Tamer Higazi
Hi Mark!
you were entirely right, the problem were the input drivers.
There three packages I remerged:
xf86-input-mouse
xf86-input-keyboard
xf86-input-evdev
and the problem was gone.
Tamer
Am 13.07.2010 18:45, schrieb Mark Knecht:
On Tue, Jul 13, 2010 at 8:57 AM, Tamer Higazi th9
Hi people!
I am in front of a disaster updating my gentoo system. Now the system
is shot, and I am not capable starting the gnome-manager:
at the end it says only:
checking Pango flags... configure: error:
*** Pango not found. Pango built with Cairo support is required
*** to build GTK+. See
Bill Longman bill.long...@gmail.com:
On 08/13/2010 07:09 AM, Tamer Higazi wrote:
Hi people!
I am in front of a disaster updating my gentoo system. Now the system
is shot, and I am not capable starting the gnome-manager:
at the end it says only:
checking Pango flags... configure: error
Hi Alex!
I solved the problem. There's a workaround! I had to merge at first
cairo and then pango. This is what gentoo didn't make, the hell I know
why.
Tamer
Am 14.08.2010 17:01, schrieb Alex Schuster:
Alan McKinnon writes:
On Friday 13 August 2010 16:09:48 Tamer Higazi wrote
pango could be built without cairo support, the configure script should
have checked if pango was built with cairo support.
Tamer
Am 13.08.2010 19:28, schrieb Bill Longman:
On 08/13/2010 08:22 AM, Tamer Higazi wrote:
As you told me I merged lafilefixer and ran lafilefixer --justfixit
then I
I am still trying to get the last 50 packages merged, at gnome-panel
(and others too), png 1.2 flag is not
recognized, but libpng 1.2 is installed, and I don't know where to fund
the error.
for any advises thank you
Tamer
Here the error:
CCLD gnome-panel
Hi people!
For a project I need to create ssh accounts (based on shared keys) who
would be loged in a specific directory. They should only be able to
login in the desired directory, but not be able for outside browsing.
for example:
/work/
but not / or any other scope.
How would you guys
on the console:
Write failed: Broken pipe
Any ideas?!
On 22.08.2010 20:40, Kalkin Sam wrote:
Hi,
Young padawan Tamer Higazi th9...@googlemail.com spoke:
Hi people!
For a project I need to create ssh accounts (based on shared keys) who
would be loged in a specific directory. They should only
Hi people!
I updated yesterday my gentoo box. And now I can't login with SSH
through shared keys on my clients Server what I did all the time.
When I made the world update, there was the package udev. I guess it
might have something todo with this.
For a short reply I would thank you.
Tamer
Hi people!
I am trying to merge x11-themes/tango-icon-theme-0.8.90, and I don't
know how to solve this problem. If anybody know's the answer I would
kindly thank him/her.
What could it be?!
Here is the output:
/usr/bin/install -c -m 644 'window-new.png'
ICC would be only interisting if I would have a fallback sollution, that
doesn't exist right now.
For example, if ICC wouldn't compile that it falls back automaticly to gcc.
As said, too sad :(
Tamer
Am 05.09.2011 23:43, schrieb Stefan G. Weichinger:
Anyone else using Intel's compiler,
As I say, I did once. There is no fallback to gcc if icc wouldn't
compile a package.
I know, that the ICC compiler promise to give more performance
However, collect your experience and speak with the gentoo maintainer
for the icc compiler packages to have a fallback routine. Would be
really
Hi people!
Has any of you an idea what might be the problem that I get this message
displayed in the console:
./phes: error while loading shared libraries: libwx_base-2.8.so.0:
cannot open shared object file: No such file or directory
is it a program linking problem, or is it a setting that the
Hi!
As I know Unity is a cannonical thing, not a gnome or ubuntu issue.
I even wouldn't wonder if that application is closed source that is
destributed only through the apt cannonical package mirror APT list.
Tamer
Am 24.09.2011 09:31, schrieb Dale:
Nilesh Govindarajan wrote:
Okay the thing
Hi!
I have configured pulseaudio according
http://en.gentoo-wiki.com/wiki/PulseAudio
but I simply have no sound.
The pulseaudio playback volume meter shows me signal, and that the bars
are jumping if I playback a music track.
alsa-plugins (with pulseaudio USE flag)
gst-plugins-pulse
are
Am 28.09.2011 23:28, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:24 PM, Tamer Higazi th9...@googlemail.com wrote:
Hi!
I have configured pulseaudio according
http://en.gentoo-wiki.com/wiki/PulseAudio
but I simply have no sound.
The pulseaudio playback volume meter shows me
Am 29.09.2011 00:09, schrieb Mick:
On Wednesday 28 Sep 2011 22:49:06 Tamer Higazi wrote:
Am 28.09.2011 23:28, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:24 PM, Tamer Higazi th9...@googlemail.com
wrote:
Hi!
I have configured pulseaudio according
http://en.gentoo-wiki.com/wiki
Am 29.09.2011 00:03, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:49 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 28.09.2011 23:28, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:24 PM, Tamer Higazi th9...@googlemail.com wrote:
Hi!
I have configured pulseaudio according
Am 29.09.2011 01:27, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 7:08 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 29.09.2011 00:03, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:49 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 28.09.2011 23:28, schrieb Canek Peláez
Am 29.09.2011 01:28, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 7:27 PM, Canek Peláez Valdés can...@gmail.com wrote:
On Wed, Sep 28, 2011 at 7:08 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 29.09.2011 00:03, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:49 PM, Tamer
Am 29.09.2011 01:28, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 7:27 PM, Canek Peláez Valdés can...@gmail.com wrote:
On Wed, Sep 28, 2011 at 7:08 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 29.09.2011 00:03, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 5:49 PM, Tamer
at the office and I'm writing this on my phone). It's also
possible to do it with gnome-sound-settings, in the hardware tab (if I
remember correctly).
Good luck.
El 28/09/2011 20:27, Tamer Higazi th9...@googlemail.com
mailto:th9...@googlemail.com escribió:
Am 29.09.2011 01:27, schrieb Canek
16:51, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 8:26 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 29.09.2011 01:27, schrieb Canek Peláez Valdés:
On Wed, Sep 28, 2011 at 7:08 PM, Tamer Higazi th9...@googlemail.com wrote:
Am 29.09.2011 00:03, schrieb Canek Peláez Valdés:
On Wed
Hi people!
I want to make my linux machine being a wlan access point for my other
components like Notebook, Cell phone etc...
Now the big question, what do I need to accomplish this?!
like a wlan router where I would get a WPA2 key, I want the linux
machine to act as a wlan router who offers
Hi people!
I am not getting smart how to connect my bluetooth headset on gentoo
linux having a continues connection with an alsa device.
Is there anybody here who did that before?!
For any support from you I would thank you.
Tamer
was in discovery mode. I added it, okay. but
even though on pulseaudio I don't see the device at all.
however, I need to see it as an alsa device. this is my problem.
But thanks so far
Tamer
Am 06.01.2012 05:47, schrieb Canek Peláez Valdés:
On Thu, Jan 5, 2012 at 10:39 PM, Tamer Higazi
People!
I am not a bluetooth expert how do I configure bluez to make a
permanent connection with the bluez headset???
I did:
pcm.jabra {
type bluetooth
}
pcm.jabra-in {
type plug
slave {
pcm jabra
rate 48000
}
}
ctl.jabra {
type bluetooth
}
but for sure it's not all
I tell you the right way todo it. Make it easy as possible, not so
difficult like the others in the thread!
Download system rescuecd (which is a nice gentoo system with lots of
beautiful tools running out of the box):
http://www.sysresccd.org/Download
download, burn and boot from the cd. This
Hi people!
I want to upgrade gnome 2.32 to gnome 3.
First question, is it now officially supported by the gentoo team or
should I keep my fingers away of it?!
http://www.gentoo.org/proj/en/desktop/gnome/howtos/gnome-3.2-upgrade.xml
doesn't tell me a lot how to accomplish this task. Is there any
GNOME 3.2, please disable
* it now, since GNOME 3.2 is already in portage and unmasked.
How do I install gnome 3.2, that is now in portage?!
Tamer
Am 11.03.2012 17:43, schrieb Alan McKinnon:
On Sun, 11 Mar 2012 17:01:41 +0100
Tamer Higazi th9...@googlemail.com wrote:
Hi people!
I
AM Tamer Higazi th9...@googlemail.com wrote:
Hi Alan!
I thought more or less that I have to unmask packages, or making any
configurations to unlock the update to gnome3.
If I run now:
tamer@office ~ $ emerge -pav gnome
These are the packages that would be merged, in order:
Calculating
output you get:
emerge -pv =gnome-3.2.1
On Mon, 12 Mar 2012 13:56:56 +0100
Tamer Higazi th9...@googlemail.com wrote:
Hi Alan!
I thought more or less that I have to unmask packages, or making any
configurations to unlock the update to gnome3.
If I run now:
tamer@office
a full emerge -e world, then emerge
gnome-3. It will go easy and probably JustWork out the box.
On Tue, 13 Mar 2012 22:33:56 +0100
Tamer Higazi th9...@googlemail.com wrote:
Hi Alan!
you were right. It is masked! I figured out that autounmask is not
in portage, because of that I believe
Hi!
I am running a stable port of gentoo with gnome 2.31.1 and I want to run
compiz.
How do I run compiz proparly?! I am pretty sure, that I do something
wrong. For any advise, I would thank you.
Tamer
When I open gnome-terminal (shell) and run compiz-manager I get the
following output:
Hi Nilesh!
Am 16.03.2012 13:49, schrieb Nilesh Govindrajan:
I think you need to be present in the video group.
I am;
Clearly the problem is because access is denied to your video card.
Just ls -l /dev/nvidiactl (you should see group video there)
tamer@office ~ $ ls -lA /dev/nvidiactl
Hi people!
I have installed wanpipe from freeswitch overlay, and figured after
long time out, that if I manually load the module modprobe wanrouter,
I have the error on the screen:
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
FATAL: Error
Hi!
I have a TP-Link wlan stick, which works fine on my gentoo box! i want
to use this stick as a wlan accesspoint. Now my problem is that hostapd
tells me:
* Starting hostapd ...
rmdir[ctrl_interface]: No such file or directory
* start-stop-daemon: failed to start
`/usr/sbin/hostapd'
Hi people!
I have installed through the freeswitch overlay, the wanpipe package.
What I figure out, that If I modprobe a driver, I recevie this error:
Invalid module format
here is the output:
tamer@office ~ $ sudo modprobe wanpipe
Passwort:
WARNING: Deprecated config file /etc/modprobe.conf,
:
On 20.08.2012 00:44, cov...@ccs.covici.com wrote:
Tamer Higazi th9...@googlemail.com wrote:
Hi people! I have installed through the freeswitch overlay, the
wanpipe package. What I figure out, that If I modprobe a
driver, I recevie this error: Invalid module format
here is the output:
tamer
Even though they couldn't help..
Am 20.08.2012 18:29, schrieb cov...@ccs.covici.com:
I would contact sangoma or file a bug on the freeswitch gira.
Tamer Higazi th9...@googlemail.com wrote:
Hi Hinnerk!
I did what you say, now the magic issue comes, the kernel drivers ARE
BUILT
I even use the same headers for gentoo-3.3.8 (linux-headers-3.3),
recompiled the entire kernel and rebooted.
And the same nonsense
Am 21.08.2012 09:53, schrieb Alex Schuster:
Tamer Higazi writes:
I did what you say, now the magic issue comes, the kernel drivers ARE
BUILT for this kernel
.
Am 21.08.2012 11:14, schrieb Hinnerk van Bruinehsen:
On 20.08.2012 18:14, Tamer Higazi wrote:
Hi Hinnerk! I did what you say, now the magic issue comes, the
kernel drivers ARE BUILT for this kernel, here the modinfo output:
tamer@office ~ $ sudo modinfo
/lib/modules/3.3.8-gentoo/kernel
I am trying to get hostapd with my Atheros Wlan USB Stick to run
(zd1211rw) on Gentoo Linux to run and I am not getting further.
Now I really don't know if it's the USB stick, the driver or the hostapd
itself that makes me troubles.
I am running Gentoo x64 bit with the kernel 3.3.8.
If somebody
Hi people!
I wanted to build a qt3 application from source, that is not in the
portage tree.
http://www.tipp10.com/en/index/
What needs to be done from my side to compile this application successful?!
---
tamer@office /storage/downloads/tipp10_source_v2-1-0 $ ./configure
Configuring tipp10
Hi people!
After updating my entire world I have problems emergeing gnustep-base
(revdep-rebuild).
I get the error on the screen and I am not getting smart how to solve
it, and ideas?!:
checking whether objc really works... no
I don't seem to be able to use your Objective-C compiler to produce
Hi people,
I want my gentoo machine to check every 5 minutes the connection status.
Therefor I wrote a shell script:
-
#!/bin/bash
#set -x
dnsbroken=`ping -c1nqW5 -s8 mydomain.com 21 | grep -e unknown -e
denied -e permited`
if [ -n $dnsbroken ]
then
# reconnect the connection
hi people!
I have used all the time firehol (gentoo sources 3.3.8) to make my
firewall rules. After kernel 3.4.x I can't make use of it any more.
Has anyone of you got firehol running on a genoo system with a 3.4.x
kernel above to run?
And if not, can you adivse me something similiar to build
.
And it works.
Thank you!
Tamer
Am 19.02.2013 05:16, schrieb Alon Bar-Lev:
Yes, I use it.
Just enable all non experimental iptables settings at kernel including NAT.
Works perfectly.
On Tue, Feb 19, 2013 at 3:34 AM, Tamer Higazi th9...@googlemail.com
mailto:th9...@googlemail.com wrote
Hi people!
I have tried to install the latest release of wanpipe through the
freeswitch overlay, which I did so far successfully. Shortly I have
realised, that the wanrouter module is not loadable. When I try to
load it I get the following error:
office / # modprobe wanrouter
modprobe: ERROR:
Hi Daniel!
It tells me:
wanrouter.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV),
BuildID[sha1]=0xc0b7c0d39ff6be2335b0317010649c8fff44d58d, not stripped
what shoould I do know?!
Tamer
Am 07.03.2013 21:53, schrieb Daniel Frey:
On 03/07/2013 09:23 AM, Tamer Higazi wrote:
Hi people
Hi Alan,
insmod wanrouter.ko tells me in dmesg:
wanrouter: exports duplicate symbol register_wan_device (owned by kernel)
what does this message mean here ???
Tamer
Am 07.03.2013 21:57, schrieb Alan McKinnon:
On 07/03/2013 22:53, Daniel Frey wrote:
On 03/07/2013 09:23 AM, Tamer Higazi
successfully tested.
Tamer
Am 08.03.2013 14:09, schrieb Alan McKinnon:
On 08/03/2013 13:52, Tamer Higazi wrote:
Hi Alan,
insmod wanrouter.ko tells me in dmesg:
wanrouter: exports duplicate symbol register_wan_device (owned by kernel)
It means your module is buggy and you can't use
/2013 13:52, Tamer Higazi wrote:
Hi Alan,
insmod wanrouter.ko tells me in dmesg:
wanrouter: exports duplicate symbol register_wan_device (owned by kernel)
It means your module is buggy and you can't use it.
what does this message mean here ???
Tamer
Am 07.03.2013 21:57, schrieb
Hi people!
I am looking for a way, to set eth0:0 at the moment the system is
booting is there a way?!
I always have to set it by hand by doing: ifconfig eth0:0 192.168.2.100
I would kindly thank you having a sollution for me.
Tamer
Thank you!
Helped me very much
Tamer
Am 26.03.2013 23:02, schrieb Alan McKinnon:
On 26/03/2013 23:55, Tamer Higazi wrote:
Hi people!
I am looking for a way, to set eth0:0 at the moment the system is
booting is there a way?!
I always have to set it by hand by doing: ifconfig eth0
Hi people!
I can't update on my gentoo box gnustep-base. Always I get the error
I don't seem to be able to use your Objective-C compiler to produce
working binaries! Please check your Objective-C compiler installation.
If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
Hi people!
My old core2duo machine says slowly goodbye and I am at this lever after
7 years for buying myself a new developer machine, that should serve me
well for a long time again. With intel I never had problems, all their
systems were REALLY stable, and they were really worth their money up
Hi Dale!
Am 13.04.2013 13:54, schrieb Dale:
Pandu Poluan wrote:
I myself prefer AMD CPUs to Intel ones.
Intel has this habit of 'segmenting' their processor features. E.g.,
Intel VT-x (Intel's buggy implementation of AMD-V) is not available
across the board.
What is VT-x
And also
13.04.2013 18:24, schrieb Pandu Poluan:
On Apr 13, 2013 8:29 PM, Tamer Higazi th9...@googlemail.com
mailto:th9...@googlemail.com wrote:
Hi Dale!
Am 13.04.2013 13:54, schrieb Dale:
Pandu Poluan wrote:
I myself prefer AMD CPUs to Intel ones.
Intel has this habit of 'segmenting
Am 13.04.2013 19:45, schrieb Pandu Poluan:
One, I'm not Erick.
Sorry Pandu
Two, please don't top-post.
Three, AMD has no concept of Hyperthreading. Just match -j to the number
of cores your CPU provides, and that's it.
okay.
As I wrote, an AMD Quad Core provides actual 4 cores.
Hi João!
Seems to be that the bulldozer and FX architecture is from GCC 4.6.3 up
fully supported.
http://en.gentoo-wiki.com/wiki/Safe_Cflags/AMD#FX-8xxx.2F6xxx.2F4xxx_.28Bulldozer.29
Tamer
Am 15.04.2013 16:47, schrieb João Matos:
Great discussion.
I'm in a similar situation. I'm using a
Hi people!
I uninstalled the linux-headers and the kernel-sources by accident, how
can I install then again?! Any ideas?!
I tried, but got at the linux-headers problems.
I have a linux-rescuecd on a usb stick, might it work over that way ?!
Tamer
Hi Michael,
Nope, I don't get them there.
1st question) where are the headers installed at all?!
2nd) where are the headers already compiled to get?!
Tamer
Install linux-headers-3.9 into
/var/tmp/portage/sys-kernel/linux-headers-3.9/image/ category sys-kernel
make -j5
Michael!
You didn't get my question Where does Gentoo install the
linux-headers, after compilining on the system?!
Tamer
Am 16.05.2013 15:16, schrieb Tamer Higazi:
Hi Michael,
Nope, I don't get them there.
1st question) where are the headers installed at all?!
2nd) where
Am 16.05.2013 15:42, schrieb Nikos Chantziaras:
On 16/05/13 16:20, Tamer Higazi wrote:
Where does Gentoo install the
linux-headers, after compilining on the system?!
They are installed in:
/usr/include/asm-generic
/usr/include/mtd
/usr/include/linux
/usr/include/asm
Hi people!
I want to have a feature installed on my gentoo machine, that if I boot
I am will see a high resolution console.
When I boot from the system rescue cd, at boot time it is being switch
to a higher resolution, which I want to have on my default system as well.
Can somebody of you tell
Hi people!
I don't know how to merge the package pycrypto, I get always this error.
How do I solve this problem that portage can merge python packages
without any problems?!
Tamer
here the log:
ACCESS DENIED open_wr:
answer to stupid response:
as a normal user you wouldn't be capable to merge anything.
OF COURSE I DID IT AS ROOT!
Am 20.05.2013 05:31, schrieb staticsafe:
On Mon, May 20, 2013 at 05:24:29AM +0200, Tamer Higazi wrote:
Hi people!
I don't know how to merge the package pycrypto, I get always
walt, I am just confused because the entire system is totally unstable
and I need to update it
HP PLEASE.
Am 21.05.2013 02:13, schrieb walt:
On 05/20/2013 05:54 AM, Tamer Higazi wrote:
answer to stupid response:
as a normal user you wouldn't be capable to merge anything
Hi people!
When I merge large or big packages like firefox, thunderbird or
chromium. The system hangsup with kernel panick and displays on the
screen reboot after 30 seconds.
What could it be?!
For any help or advises, I would kindly thank you.
Tamer
The problem is the following, that the same crap happen on Windows as
well. I got there bluescreen after a while.
I made a memory test, and let it run over 50% of over all tests, and no
error displayed (perhaps I let it go more then hours).
However, I don't really believe that it is a memory
Hi people!
I have come close, according my profession to buy myself the latest Mac
Mini Server.
Because I do all of my development stuff on Gentoo and Windows, I am
highly interested to know if any of you guys is running Mac OS X and
Windows beside Gentoo and boot from GRUB.
What I hear all the
Hi!
My questions:
1. Do I need bootcamp?!
2. Why am I not able to accomplish this task with grubm and have to take
refind ?
3. What would be the way to install Windows, Linux and Mac on 1 hard
disk. Would that be possible?
I would kindly thank you for your answer.
Tamer
Boot Camp is a
, May 28, 2013, at 11:31 AM, Tamer Higazi wrote:
Hi!
My questions:
1. Do I need bootcamp?!
You don't need bootcamp, but it does make the windows install more
streamlined. You will probably still want bootcamp to install the apple
drivers post-install regardless. The drivers are the OS X
It's usually a quality power supply unit, that made it 6 years.
However, what I find totally strange, at the same time. That
applications die during my work.
Totally strange, like clock dies, and restarts. Eclipse dies, firefox
dies.
I have the feeling that memory and power supply are
Dale!
I am getting now myself a Mac OSX Mini Server with 8GB or 16GB RAM, and
get OSX, Windows and Gentoo there on a disk to run. That's it!
Proper screen with a very high resolution, and I am happy, and I am back
coding.
For future travels, My CPU makes with me the journey all the time
:)
Hi Andrea!
Am 29.05.2013 11:25, schrieb Andrea Conti:
The real problem is that while rEFIt/rEFInd, OSX and Linux have no
problem dealing with a GPT partition table, Windows only supports MBR.
(Windows 7+ supports GPT partition tables but it can only boot from a
GPT disk in EFI mode.
So,
Okay, I meanwhile got that even the most new Mac Mini Servers make use
of the earliest implementations of EFI that Windows doesn't understand.
The only way to get Windows booted propperly is in BIOS emulation mode,
but that Partitions wouldn't be recognized (according it's emulation).
Hi Andrea!
Got the problem with Windows I red myself today through (h)
No need to answer my last Mail in the List, it is all clear to me now.
But thanks again, for the last long explanation anyway
Tamer
Am 30.05.2013 10:04, schrieb Andrea Conti:
The real problem
Hi Yuri,
If the MAC Mini has a UEFI Bios, then the whole problem we have talked
about was for nothing.
That is only related to 32 Bit Versions of Windows.
x64 Windows 7 Version comes with a UEFI Bootloader and an installer,
that can be used.
Am 30.05.2013 10:04, schrieb Andrea Conti:
No. :)
While Intel Macs are EFI platforms, they have an early and quirky
implementation that cannot properly boot Windows in EFI mode
I hope you are not right for the latest MAC Mini, I would like to buy.
PS: Sorry, long line
Tamer
Hi people!
I am trying to build pycrypto, by it fails to merge.
Always I get ACCESS VIOLATION. I didn't make the merge as user (with
sudo), I am doing it as root from a shell.
Not even a shell opened in gnome. Just in a plain terminal session.
If anybody of you could tell me where the error
Pielmeier:
2013/6/19 Tamer Higazi th9...@googlemail.com:
Hi people!
I am trying to build pycrypto, by it fails to merge.
Always I get ACCESS VIOLATION. I didn't make the merge as user (with
sudo), I am doing it as root from a shell.
Which version of setuptools do you have installed?
You
Same result with the version of sandbox you make use of it!
Tamer
Am 19.06.2013 10:13, schrieb Helmut Jarausch:
That's strange, since I've just re-emerged the same version of PyCrypto
here.
One difference might be the version of sys-apps/sandbox
On my unstable Portage system I'm using
Daniel!
You were absolutely right, it was the doc USE Flag that caused the
problem.
Thank you
Am 19.06.2013 13:05, schrieb Daniel Pielmeier:
No ebuild should mess with the live system!!!
The problem is probably with the doc use flag.
Tamer you can also try to install pycrypto without
And I will file this evening a bug of course..
Am 19.06.2013 14:23, schrieb Tamer Higazi:
Daniel!
You were absolutely right, it was the doc USE Flag that caused the
problem.
Thank you
Am 19.06.2013 13:05, schrieb Daniel Pielmeier:
No ebuild should mess with the live system
tried to merge libreoffice-bin, and the dependency failed to compile.
Any ideas what might be the problem or how to solve that?!
http://pastebin.com/raw.php?i=dwMcutSq
Tamer
I want to update the system and then world, but still have a lots of
blocks and don't know how to solve that.
emerge error output:
http://pastebin.com/raw.php?i=XTKQHUjk
On the gentoo forums nobody could help me.
Perhaps here any ideas ?!
gentoo actually wants to install systemd? Did you change
to gnome3? Which profile do you use?
Regards,
Ralf
On 01/09/2014 01:01 PM, Tamer Higazi wrote:
I want to update the system and then world, but still have a lots of
blocks and don't know how to solve that.
emerge error output:
http
I tried, and I get still blocks, independently which
PYTHON_SINGLE_TARGET I make use of!
http://pastebin.com/raw.php?i=hVLKC1J5
Any ideas ?!
Tamer
On 01/09/14 13:34, Hinnerk van Bruinehsen wrote:
On Thu, Jan 09, 2014 at 01:01:28PM +0100, Tamer Higazi wrote:
I want to update the system
Hi people!
I finally managed to update my @system profile completly.
Now I want to update world, and I see that certain packages require
python_single_target_python2_7 or python_single_target_python3_2
I don't know how to change my make.conf that everything fits, that I can
update my entire
You were RIGHT!
I had to comment out at make.conf 2 lines (last line wasn't enough):
PYTHON_TARGETS and PYTHON_SINGLE_TARGET as well.
Thank you David!
Tamer
On 01/20/14 21:45, David Abbott wrote:
Try commenting them out.
[snip]
Regards,
David
I don't know why, but I did a complete @system @world profile update
and everything got solved by itself.
Still, thanks a lot!
Tamer
Am 09.01.2014 03:30, schrieb Tom Wijsman:
On Thu, 09 Jan 2014 03:06:05 +0100 Tamer Higazi
th9...@googlemail.com wrote:
tried to merge libreoffice-bin
1 - 100 of 158 matches
Mail list logo