Re: [GRASS-user] MODIS HDF conversion in TIF tool.

${INPUT} $NEWNAME.HGRS87.tif done Nikos Alexandris wrote: Well, after searching and reading I found a script written by Markus Neteler. I tried to change the parameters in it and get directly from sinusoidal to HGRS87 (below the script only with the parameters changed). Initially

[GRASS-user] FOSSGIS2008 in Freiburg, Germany -- Is it interesting for the latest news?

According to http://www.fossgis.org/ the conference will take place from the 1st till the 3rd of April in the University of Freiburg, in Germany. Is this interesting to upload in http://grass.itc.it/ ? -- View this message in context:

[GRASS-user] Is there an r.categorize-like command in GRASS 6.3 ?

In GRASS 6.2.2 (installed from the Ubuntu repo's) there is r.categorize with the very useful categorization mode: rwidth. What is the respective tool in GRASS6.3? -- View this message in context:

[GRASS-user] r.regression.line... differences with regression function LINEST in openoffice.org-calc (?)

I have submitted some comments upon the documentation of the r.regression.line script in http://wald.intevation.org/tracker/?func=detailaid=552group_id=21atid=207 Now I have 2 questions. Apologies if I miss some obvious things but I am confused! Here it goes: 1. I don't understand why (in

[GRASS-user] i.smap fails because it can't find subgroup (?)

Hi GRASS-community! I am facing this strange (for me!) problem with i.smap: 1. I build a group subgroup with i.group (using 3 raster maps, floating point all) 2. I digitised in QGIS some burned and some non-burned areas, imported the vector file in GRASS and transformed it to a raster map

Re: [GRASS-user] i.smap fails because it can't find subgroup (?)

? ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49

Re: [GRASS-user] (kein Betreff)

help me with this problem? a want to have an equal space for all vertices on my polylines michael -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697

Re: [GRASS-user] MASK does not do it's work (?) with r.mapcalc

OK... I am confused! (An example) With r.mapcalc I create: (a) NDVIDIFF0 based on if(NDVIDIFF 0, StudyArea_Raster, null()) { Data type and r.describe of NDVIDIFF0: CELL, * 1-23 25-30 32-42 } (b) and NDVIDIFF0_fromNDVI based on if(NDVIDIFF 0, NDVIDIFF, null()) { Data type and r.descrive of

[GRASS-user] he ISPRS Student Consortium interviews the GRASS-GIS user mailing list

http://www.opensource.org/docs/osd --- Compiled by Nikos Alexandris ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] Running two instances of GRASS

Indeed, you can use the same location but different mapset! On Thu, 10 Jan 2008 15:18:19 +0100 [EMAIL PROTECTED] wrote: Hi Daniel! I use grass 6.2.3 and 6.3.svn at the same time on different location and mapset (of course!). Cheers, Nikos. On Thu, 10 Jan 2008 12:10:23 -0200

Re: [GRASS-user] Running two instances of GRASS

http://lists.osgeo.org/mailman/listinfo/grass-user . Nikos Alexandris - Ph.D. Candidate . Department of Remote Sensing and Landscape Information Systems

Re: [GRASS-user] About importing VMAP into GRASS... (as shapefiles)

Hi! I still didn't find a way to import coastlines from the VMAP data base. I tried to look after the: mv: missing destination file operand after `.' error message but I can't figure it out. I don't need necessarily to convert into a shapefile. Anybody that has done it recently? I really

Re: [GRASS-user] Another SQLite - OpenOfficeorg Database issue (for me?)

YOuuwhooo sqlitebrowser is superbe!!! Thanks for the tip! So easy and fast... ! On Fri, 2008-01-11 at 15:44 +0200, Wolf Bergenheim wrote: On 11.01.2008 15:32, Nikos Alexandris wrote: Is it a limitation of SQLite or OOo DB that I cannot drop columns from

Re: [GRASS-user] About importing VMAP into GRASS... (as shapefiles)

) precise. YMMV, though, depending on the area you are interested. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems

[GRASS-user] SRTM3 data export to ESRI ascii or grid -- Problem: exported file is huge!

Hi list! I have imported (from GeoTIFF to GRASS) an SRTM3 tile (the one that covers Switzerland) and after creating a subset ( based on following vector-box... : v.info Cadre Projection: Swiss. Obl. Mercator (zone 0) N: 137742.082S: 125477.601

[GRASS-user] Can't dissolve based on column?

All I try to do is a dissolve... and for: v.dissolve input=clc00_clean output=clc00_dissolved col=CODE_00 I get: DBMI-SQLite driver error: Cannot step: SQL logic error or missing database ERROR: Cannot fetch data ERROR: Unable to open vector map [EMAIL PROTECTED] on topology level 2

RE: [GRASS-user] Can't dissolve based on column?

be of type integer, and *only* integer? ~ Eric. -Original Message- From: [EMAIL PROTECTED] on behalf of Nikos Alexandris Sent: Wed 1/16/2008 3:41 PM To: grass-user@lists.osgeo.org Subject: Re: [GRASS-user] Can't dissolve based on column? Well... I suspected it had to do

Re: [GRASS-user] problems starting wxPython gui using wingrass

@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0) 761 203 3701 / Skype

Re: [GRASS-user] Can't dissolve based on column?

to open vector map [EMAIL PROTECTED] on topology level 2 ERROR: Vector map clc00_final_v not found in current mapset On Wed, 2008-01-16 at 22:08 +0100, Martin Landa wrote: Hi, 2008/1/16, Nikos Alexandris [EMAIL PROTECTED]: My column CODE_00 was identified as TEXT, not varchar. So maybe

Re: [GRASS-user] Can't dissolve based on column?

Are there plans to change the TEXT problem with respect to v.dissolve (v.extract)? I need to know, if it possible, due to some documentation I am preparing. Thank you! On Wed, 2008-01-16 at 22:08 +0100, Martin Landa wrote: Hi, 2008/1/16, Nikos Alexandris [EMAIL PROTECTED]: My column

Re: [GRASS-user] When starting grass in text mode,why... ? (Question of minor importance)

Very LONG Post! [EMAIL PROTECTED]:/usr/local/grass-6.3.0RC4/etc$ grass63 -text + trap echo 'User break!' ; exit 2 3 15 + GRASS_PERL=/usr/bin/perl + export GRASS_PERL + GRASS_SH=/bin/sh + export GRASS_SH + GRASS_VERSION=6.3.0RC4 + export GRASS_VERSION + CMD_NAME=grass63 + uname -s + SYSTEM=Linux +

Re: [GRASS-user] Can't dissolve based on column?

is not good but you may be the idea of what I mean) Cool. It's always amazing how powerful these little command line tools can be. ~ Eric. . Nikos Alexandris - Ph.D. Candidate

Re: [GRASS-user] problems starting wxPython gui using wingrass

expression) that I was getting an error with svn up but now not! (2) Yes... trunk... (sorry for insisting). On Thu, 17 Jan 2008 10:28:41 +0100 Martin Landa [EMAIL PROTECTED] wrote: Hi, 2008/1/16, Nikos Alexandris [EMAIL PROTECTED]: I am sorry for bothering again. I am on ubuntu

[GRASS-user] How to list all unique pixel values (of a raster) covered by polygons (areas) for each polygon separately(?)

I tried to make it clear in the title... but I am not sure that it's easy to understand. Using v.rast.stats I get uni-variate statistics from a raster (in my case a MODIS image with 250m pixel size) based on polygons I digitised manually (areas). How can I get listed all unique pixel values

Re: [GRASS-user] How to list all unique pixel values (of a raster) covered by polygons (areas) for each polygon separately(?)

. Nikos Alexandris - Ph.D. Candidate . Department of Remote Sensing and Landscape Information Systems (FeLIS) . Faculty of Forestry and Natural Environment Albert-Ludwigs

Re: [GRASS-user] problems starting wxPython gui using wingrass

: Hi, 2008/1/16, Nikos Alexandris [EMAIL PROTECTED]: I am sorry for bothering again. I am on ubuntu. I updated (sudo svn up) from within general note, why are you running 'svn up' as sudo?? the /usr/local/src/MyGRASSsourceDirectory Configured-compilled-installed

Re: [GRASS-user] problems starting wxPython gui using wingrass

not! (2) Yes... trunk... (sorry for insisting). On Thu, 17 Jan 2008 10:28:41 +0100 Martin Landa [EMAIL PROTECTED] wrote: Hi, 2008/1/16, Nikos Alexandris [EMAIL PROTECTED]: I am sorry for bothering again. I am on ubuntu. I updated (sudo svn up) from

Re: [GRASS-user] How to list all unique pixel values (of a raster) covered by polygons (areas) for each polygon separately(?)

. Nikos Alexandris - Ph.D. Candidate . Department of Remote Sensing and Landscape Information Systems (FeLIS) . Faculty of Forestry

Re: [GRASS-user] How to list all unique pixel values (of a raster) covered by polygons (areas) for each polygon separately(?)

!) script: #!/bin/sh # List pixel values covered by areas of interest for each area separately # First attempt, Nikos Alexandris if [ -z $GISBASE ] ; then echo You must be in GRASS GIS to run this program. 2 exit 1 fi PROG=$0 echo Script to list all unique pixel values in raster(s) covered

Re: [GRASS-user] MASK does not do it's work (?) with r.mapcalc -- Again!

I still can't explain why I can't create a mask with the following raster: ++ | Layer:NDVI20060.35 Date: Tue Jan 22 13:53:02 2008 | | Mapset: nikLogin of Creator:

Re: [GRASS-user] border irregular

? Alfredo ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert

Re: [GRASS-user] MASK does not do it's work (?) with r.mapcalc -- Again!

. Maybe I use it wrong(?) Should I specify to assign a value of 1 for all non-NULL source pixels? I'll try with mask = a != 0 as described in the r.mapcalc manual. If you want to create a mask based upon null/non-null, use e.g.: r.mapcalc MASK = !isnull(inmap) -- Nikos

RE: [GRASS-user] MASK does not do it's work (?) with r.mapcalc --Again!

Folks, (with all the respect) the GRASS community is a phenomenon! Cheers, Nikos. On Wed, 2008-01-23 at 09:24 -0500, Patton, Eric wrote: Nikos Alexandris wrote: Thanks for the important clarification. Do you think it would be useful to add this information in the manual of r.mask

Re: [GRASS-user] v.coordinate.sh - improve this script?

mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0

Re: [GRASS-user] clip and rotate a raster

___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs

Re: [GRASS-user] online documentation is off

relevant pages have been fixed. Please watch out for further broken links. cheers, Markus ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing

Re: [GRASS-user] online documentation is off

to have PHP based IP geolocating here, to auto-insert the location. Any ideas how to implement that? Markus On Jan 25, 2008 5:09 PM, Nikos Alexandris [EMAIL PROTECTED] wrote: Salut! Just a small remark... (because I don't know where the master server now is): if the master server

Re: [GRASS-user] creating new geometry from pre-existing lines and points

it to update? thank you again, -david ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty

Re: [GRASS-user] creating new geometry from pre-existing lines and points

Hi! On Wed, 2008-01-30 at 23:52 +0200, David Epstein wrote: Hi Nikos, Thank you for that suggestion. Indeed, I did NOT realize that v.extract was used to create new geometry in a layer. However, I too need some of the islands (is there a technical difference between island, hole, and

[GRASS-user] [Fwd: Re: r.regression.line... differences with regression function LINEST in openoffice.org-calc (?)]

-- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0) 761 203 3701 / Skype: Nikos.Alexandris . Address: Tennenbacher str. 4, D-79106 Freiburg

Re: [GRASS-user] v.db.addtable G_calloc Problem

Hi Mick, just look in the archives! I have found in an older post that it is probably related with the region settings (the resolution). Check your resolution with g.region -p. Is it too high? -- View this message in context:

Re: [GRASS-user] Permission denied (again!)

right permissions on grassdata ? what does ls -lh /path/to/grassdata/parent/dir say? jachym Nikos Alexandris píše v Út 05. 02. 2008 v 12:17 +0100: Hi list! I shifted from Ubuntu 7.10 32-bit to 64-bit and all of a sudden I have a very annoying problem when using GRASS

Re: [GRASS-user] Permission denied (again!)

O.K. 1. grass -gui (or grass62 -gui) does not allow me to create a new LOCATION anywhere *using ESPG just ends up with: WARNING: Please restart GRASS (closint it for you now). *using Georeferenced file ends up with: /usr/bin/x-terminal-emulator: to set an icon, please use

Re: [GRASS-user] Permission denied (again!)

___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg

Re: [GRASS-user] v.rast.stats error

___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University

[GRASS-user] How can I upload a screenshot (.png) in GRASS propaganda?

? -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0) 761 203 3701 / Skype: Nikos.Alexandris . Address: Tennenbacher str. 4, D-79106 Freiburg

Re: [GRASS-user] Questions: Clipping polygon layer to the outer boundary of another layer...

in grass6 -- but it's not really necessary. Thanks for any help, Rick Reeves ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape

Re: [GRASS-user] wxgui issue ( No module named wx)

-- Martin Landa landa.martin gmail.com * http://gama.fsv.cvut.cz/~landa * -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0) 761 203

Re: [GRASS-user] Display Of Tiff Raster file Stored on HDD in Grass

09871147561 -- Thanks Regards Kunal Malik 09871147561 ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information

Re: [GRASS-user] Display Of Tiff Raster file Stored on HDD in Grass

information. ERROR: Projection of dataset does not appear to match current location. Same messge is coming when I am doing the same through GIS Manager.. Can u help me i this Regards..so that i could open the avalible TIf image On 2/13/08, Nikos Alexandris [EMAIL PROTECTED

Re: [GRASS-user] Problem with v.digit

://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0) 761 203 3701 / Skype: Nikos.Alexandris . Address

[GRASS-user] (no subject)

I am curious if any of you experienced developers has ever thought about using GPU as a CPU (or Co-CPU) in order to boost calculation speed... ? Is it or is not possible? http://www.gpgpu.org/ Cheers, Nikos signature.asc Description: This is a digitally signed message part

Re: [GRASS-user] r.describe Range output report type - superseded?

://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0) 761 203 3701 / Skype: Nikos.Alexandris . Address

Re: [GRASS-user] d.rast.edit does not save edited cells (?)

raster and see the changes (I load the NEW raster and it is identical with the old map) Is it the * values? Effects take place with non-NULL values maybe? On Thu, 2008-02-21 at 08:02 +, Glynn Clements wrote: Nikos Alexandris wrote: I am trying to make use of this amazing tool

Re: [GRASS-user] d.rast.edit does not save edited cells (?)

of countless clicks. I know many occasions were this is necessary to be done and there is no fastest and more precise method than just doing it by hand. Cheers ;-) On Thu, 2008-02-21 at 12:14 +0100, Nikos Alexandris wrote: No errors! Hmmm... ! I though that it works as follows (and did): 1. Open

Re: [GRASS-user] d.rast.edit does not save edited cells (?)

On Fri, 2008-02-22 at 02:32 +, Glynn Clements wrote: Nikos Alexandris wrote: Hmmm... ! I though that it works as follows (and did): 1. Open a raster and give a name for the new raster (open a raster with areas, all having the same value 5) 2. edit, save, exit (I erased lots

Re: [GRASS-user] d.rast.edit does not save edited cells (?)

mapping is not the automatic way. It's necessary to get involved! This is why I like the link option in OpenEV (FWTools), the cell value layer, the directional arrows layer. Thank you Glynn, Nikos On Fri, 2008-02-22 at 09:07 +, Glynn Clements wrote: Nikos Alexandris wrote: However

Re: [GRASS-user] d.rast.edit does not save edited cells (?)

I just now realised the use of the right mouse button. But I am not able to figure out how the middle button works. How does it work? I take back my words for the magic key if this highlight function is working ;-) Cheers, Nikos On Fri, 2008-02-22 at 04:41 -0800, Hamish wrote: Nikos Alexandris

[GRASS-user] How to import KML polygons in GRASS?

Maybe I am just loosin' my time struggling to import KML polygons in GRASS but here is my attempt and my problems. I have read past threads but I didn't really found the SOLUTION I understand that it should be easy to play with xpath and xslt but since KML's are XML's but, again, I have no idea

Re: [GRASS-user] How to import KML polygons in GRASS?

(especially in the -f parameter in the cur command). Does ogr2ogr convert from GML to GRASS vector files? Oh... I am trying it out right away... ;-) On Sun, 2008-02-24 at 16:05 +0100, Nikos Alexandris wrote: Maybe I am just loosin' my time struggling to import KML polygons in GRASS but here is my

Re: [GRASS-user] How to import KML polygons in GRASS?

OK, I can open correctly the kml and the gml file with OpenEV which means I got support for both. But I wonder why can't I read/ wrtie successfully in the command line or within GRASS (v.in.ogr) Am I maybe using another GDAL/OGR version... since I compiled GRASS manually! I don't remember

Re: [GRASS-user] How to import KML polygons in GRASS?

Hamish, thank you. You are always there... ;-) On Sun, 2008-02-24 at 20:53 -0800, Hamish wrote: Nikos Alexandris wrote: Maybe I am just loosin' my time struggling to import KML polygons in GRASS but here is my attempt and my problems. You might try using v.in.gpsbabel, http

Re: [GRASS-user] query of attribute data

mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences, Albert-Ludwigs-University Freiburg . Tel. +49 (0) 761 203 3697 / Fax. +49 (0

Re: [GRASS-user] circular pallete?

illustration program, saving as eps? The intent id to draw a circular colorscale for aspect maps, so it would look nicer than a rectangular one. cheers Carlos -- Nikos Alexandris . Department of Remote Sensing Landscape Information Systems Faculty of Forestry Environmental Sciences

Re: [GRASS-user] How to import KML polygons in GRASS?

(Replying partially to myself) Well, afterall it works! I removed gdal-bin (installed from Ubuntu repo's) and build gdal from source. With a simple ./configure - make - sudo make install I get gdal/ogr almost working ( got expat support but lost something else ;-( ) I needed to add in

[GRASS-user] kml topology... ?

Continuing my small quest with kml files... and bombing you with simple questions ;-p are kml files carrying topology information besides coordinates? I needed to manually correct a kml file which looked very bad after importing in GRASS (with -c otherwise it was not useful!) Automatic

[GRASS-user] Just a successful report ; -) --- Compiling GRASS source code under Ubuntu 7.10 64-bit with...

... support for 64-bit, SQLite, OpenGL, PYTHON, FFMPEG It's FAST ;-) I would like to put that on the wiki if there no objections. # Compiling latest GRASS source code on a 64-bit machine (with ATI graphic card) under Ubuntu 7.10 64-bit with support for: 64-but, SQLite, OpenGL, PYTHON, FFMPEG

[GRASS-user] Creating with GRASS (and QGIS) a LOCATION with EPSG:2100 assingns the wgs84 ellipsoid instead of grs80!

It might be something serious... or maybe not (?) EPSG:2100 is the Greek Geodetic Rereference System 1987 ( I insist it should be named Hellenic Geodetic... etc). This Projected Coordinate Reference System is based on the GRS80 [1] * Whenever I create a LOCATION with this code through GRASS and

Re: [GRASS-user] MAPSET PERMANENT - permission denied

On Wed, 2008-02-27 at 17:06 +0530, Kunal Malik wrote: Hi jachym, do i need subversion tool for downloading the source code .??? Yes you can use the svn (=subversion) tool to download GRASS source code and the grass-addons as well. Look at http://trac.osgeo.org/grass/wiki/DownloadSource

Re: [GRASS-user] Just a successful report ; -) --- Compiling GRASS source code under Ubuntu 7.10 64-bit with...

On Wed, 2008-02-27 at 18:47 +0100, Maciej Sieczka wrote: Nikos Alexandris pisze: *** FFTW *** # ...installing FFTW cd fftw-2.1.5/ Not needed. On Gutsy the stock FFTW 3 suffices. Thanx for the tip. I can just add the rest then. Maciek Cheers, Nikos signature.asc

Re: [GRASS-user] v.digit background colour

On Thu, 2008-02-28 at 13:19 +0200, Craig Leat wrote: Hi It appears that the v.digit option: settings - Symbology - Background is broken, because I am unable to change the background colour. A further annoyance is that the background colour changes from white to cyan whenever a background

Re: [GRASS-user] kml topology... ?

On Thu, 2008-02-28 at 09:15 -0800, Dylan Beaudette wrote: Thank you for your reply Dylan! On Tuesday 26 February 2008, Nikos Alexandris wrote: Continuing my small quest with kml files... and bombing you with simple questions ;-p are kml files carrying topology information besides

Re: [GRASS-user] kml topology... ?

On Thu, 2008-02-28 at 09:23 -0800, Dylan Beaudette wrote: On Thursday 28 February 2008, Nikos Alexandris wrote: On Thu, 2008-02-28 at 09:15 -0800, Dylan Beaudette wrote: Thank you for your reply Dylan! On Tuesday 26 February 2008, Nikos Alexandris wrote: Continuing my small quest

Re: [GRASS-user] Just a successful report ; -) --- Compiling GRASS source code under Ubuntu 7.10 64-bit with...

On Wed, 2008-02-27 at 19:11 +0100, Nikos Alexandris wrote: On Wed, 2008-02-27 at 18:47 +0100, Maciej Sieczka wrote: Nikos Alexandris pisze: [...] Thanx for the tip. I can just add the rest then. Attached is a txt file slightly modified (removed the FFTW section). SuperSimple question: I

Re: [GRASS-user] Re: Just a successful report ; -) --- Compiling GRASS source code under Ubuntu 7.10 64-bit with...

On Thu, 2008-02-28 at 23:15 +0100, Markus Neteler wrote: On Wed, Feb 27, 2008 at 11:46 PM, Tim Michelsen [EMAIL PROTECTED] wrote: [...] We could think to develop a script that does the GRASS compilation and install each time there's a new version out. This is on the (long) TODO list.

Re: [GRASS-user] About .mdb geo-data base file format... please some information about alternative file formats!

and teachers and both the academic and the scientific community worldwide can benefit if EEA's geo-data are available publicly (with a subscription) in open source file formats. Thank you for your time in advance. Sincerely, Nikos Alexandris. and the reply: Dear Nikos Alexandris

Re: [GRASS-user] Re: [GRASS-dev] r.out.gdal Gtiff output does not preserve color tables

On Fri, 2008-02-29 at 10:44 -0800, Dylan Beaudette wrote: On Thursday 28 February 2008, Hamish wrote: Hamish: [...] I decided (out of complete frustration) never to use Arc again before I started much with GRASS, so I can't comment on that. For exporting stuff for colleagues I usually

Re: [GRASS-user] Just a successful report ; -) --- Compiling GRASS source code under Ubuntu 7.10 64-bit with...

On Sat, 2008-03-01 at 07:09 +0100, Jachym Cepicky wrote: better post it as normal wiki page, rather then attachment o.k. ___ grass-user mailing list grass-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/grass-user

Re: [GRASS-user] kml topology... ?

On Thu, 2008-02-28 at 18:36 +0100, Nikos Alexandris wrote: [...] One example http://tilaphos.blogspot.com/2008/01/blog-post_30.html The kml file I am talking about is (for which it is stated that it's only a rough estimation of burned areas): http://tilaphos.googlepages.com

Re: [GRASS-user] vector data: creating areas from polygon and contour lines?

On Mon, 2008-03-03 at 17:16 -0600, Jaime Carrera wrote: Hi list, For a couple of days I've been trying to create three different areas from a polygon (outer boundary) and two contour lines. The polygon is rectangle-shaped, while the contours intersect the rectangle on the right hand side

Re: [GRASS-user] a few suggestions and questions

On Mon, 2008-03-03 at 22:52 -0300, Carlos Guâno Grohmann wrote: Hello all [...] is plan curvature in r.param.scale broken? I can't get a map of it. profc works fine. Also is it possible to make r.param.scale work in latlong regions? (please?) Probably not! Just tested... and it says:

Re: [GRASS-user] How to import KML polygons in GRASS?

Just for the records: a. kml2html 1. Rename Korinthia_estimate_2007.kml to Korinthia_estimate_2007.xml and save on the same directory with kml2html.xsl. [1] 2. Edit the xml file and replace kml

Re: [GRASS-user] please help: v.rast.stats

the r.univar ) #!/bin/sh # List pixel values covered by areas of interest for each area separately # First attempt, Nikos Alexandris if [ -z $GISBASE ] ; then echo You must be in GRASS GIS to run this program. 2 exit 1 fi PROG=$0 echo $0 if [ $# -lt 1 -o $1 = -h -o $1 = --help -o $1

Re: [GRASS-user] please help: v.rast.stats

On Tue, 2008-03-04 at 17:08 -0800, Dylan Beaudette wrote: On Tuesday 04 March 2008, Nikos Alexandris wrote: On Tue, 2008-03-04 at 12:57 +, christian Brandt wrote: Dear list, Also-- see the application 'starspan'. works with GRASS, based on GDAL and GEOS. Although Jose Luis Gomez

Re: [GRASS-user] Re: Signature made by i.class not accessible?

On Wed, 2008-03-05 at 11:57 +0200, [EMAIL PROTECTED] wrote: Dear all, Since no-one seems to have any ideas for my problem (I can't get the supervised classification to work, since I can't access the signature created by i.class, and there seems to be other problems with i.class as well)

Re: [GRASS-user] removal of duplicate points

On Wed, 2008-03-05 at 09:58 -0800, Dylan Beaudette wrote: Hi, Hi Dylan I have some squares which are stored as polygons. When converting these to points (v.to.points) I am left with the 5 points (first and last point are duplicated) that define the corners of the square. Is there a

Re: [GRASS-user] removal of duplicate points

On Wed, 2008-03-05 at 19:27 +0100, Nikos Alexandris wrote: On Wed, 2008-03-05 at 09:58 -0800, Dylan Beaudette wrote: Hi, Ideas? Not really a solution but maybe... Bad Idea afterall! ___ grass-user mailing list grass-user@lists.osgeo.org

Re: [GRASS-user] removal of duplicate points

On Wed, 2008-03-05 at 10:50 -0800, Dylan Beaudette wrote: [...] And this got the job done. I wonder how hard it would be to add a similar functionality to v.edit-- which would preserve the attribute table. What about rmdupl for points based on x,y,z?

Re: [GRASS-user] removal of duplicate points

On Wed, 2008-03-05 at 11:44 -0800, Dylan Beaudette wrote: On Wednesday 05 March 2008, Nikos Alexandris wrote: rmdupl right -- from v.clean . This works, but it would be a good idea at some point to change the v.clean tool descriptions from referring to lines when the tool equally applies

Re: [GRASS-user] I need help

On Thu, 2008-03-06 at 13:18 +0100, Raonel wrote: Hi Raonel! I have already discharged the installer of Grass but I am not able to install it. I have the manual but I don't understand the form that they explain as making it Which operating system do you use? Which version of GRASS are you

Re: [GRASS-user] I need help

On Thu, 2008-03-06 at 14:07 +0100, Raonel wrote: Nikos Alexandris escribió: On Thu, 2008-03-06 at 13:18 +0100, Raonel wrote: Hi Raonel! I have already discharged the installer of Grass but I am not able to install it. I have the manual but I don't understand the form

Re: [GRASS-user] I need help

On Thu, 2008-03-06 at 23:09 +0100, Philipp Steigenberger wrote: [...] Hola Raonel, bien venido al mundo GRASS aquí una lista de difusión en español: http://lists.osgeo.org/mailman/listinfo/grass-es quizá vas a encontrar ayuda por allá. swich to inglés... You have to unpack

Re: [GRASS-user] occurrence of attributes in vektortable

On Fri, 2008-03-07 at 13:12 +0100, Nikos Alexandris wrote: On Fri, 2008-03-07 at 11:37 +0100, Marco Lechner wrote: hi list, how can i get a list of all different occurences in a column of an attributetable. Marco, in a linux-box another way would be to combine db.select

RE: [GRASS-user] occurrence of attributes in vektortable

On Fri, 2008-03-07 at 07:17 -0500, Patton, Eric wrote: how can i get a list of all different occurences in a column of an attributetable. v.db.select map=mapname column=columnname | uniq (for vector with a connected attribute table) It doesn't work for me. What am I doing wrong?

Re: [GRASS-user] occurrence of attributes in vektortable

On Fri, 2008-03-07 at 10:20 -0700, Tom Russo wrote: On Fri, Mar 07, 2008 at 03:35:17PM +0100, we recorded a bogon-computron collision of the [EMAIL PROTECTED] flavor, containing: [...] So we end up with (in my example using the table TrainingSamples and the column clccode_le): v.db.select

Re: [GRASS-user] [GRASSLIST:9108] Re: Area size of a vector layer..

HamishB wrote: I got a SHP surface vector layer and inside i got 4 categories of surfaces (each one splitted in smaller area spread on the map): I need to know the total cover extension for each category. How can I? as mentioned, v.to.db will do it, but in GRASS 6.1, v.report is a

Re: [GRASS-user] Can't connect to osgeo.org today

On Mon, 2008-03-10 at 10:51 -0400, Patton, Eric wrote: Has anyone had success synching their source code to the repositories on osgeo.org today? I can't update my source, nor connect to osgeo.org via the main website either. Eric, both work fine for me (web svn up). ~ Eric. Nikos

Re: [GRASS-user] please help: v.rast.stats

Hey guys, wanted to echo this -- we are continuing development on starspan again -- it works with gdal 1.5, among other improvements, and if you have any feature requests (or if anyone can help us make this into a grass package :), please email me or Carlos Rueda! --j Dear Jonathan, how

Re: [GRASS-user] Error using v.in.ogr to load a shapefile: any clue?

On Mon, 2008-03-10 at 15:52 +, Corrado wrote: Dear friends, I get this error when trying to read the Scotland.shp shape file using v.in.ogr. Please, not that I have the proper permissions on the databse. Do you use Ubuntu? If no disregard whatever I am writing. If yes there is strange

[GRASS-user] Wich file format to transport (raster/ vector) data from a GRASS db in to another computer's GRASS db? Why export vector data in shapefile for starspan/ OpenEV?

Dear all, it's some months now that I am trying to learn GRASS-GIS and I wonder 1. if one needs to copy some GRASS raster data from his data base in another computer's GRASS data base (same coordinate system of course), then how? Where do for example the history files go? I understand (I

  1   2   3   4   5   6   7   8   9   10   >