Do these volumes contain any VSAM datasets?
Lizette
Good Evening To All,
We have noticed that some of the VIRs on several volumes are very small. We
would like to increase the size. I am not sure if I am on the right track
this is why I need your help.
The VIR exsists on the volume
I do not think that is needed. Instead setup a JES2 Spool Offloader just for
that userid. Send it off to tape. If they want it back - make them grovel.
In fact, there is a lot of flexibility in the offloader you could use.
Lizette
OK, I'm being Scrooge. But we have a person here who
Antonio,
At this point, you may wish to open an ETR to IBM to identify why your files
are growing so quickly. I would not think it should grow that fast unless
there is a lot of backup functions running.
How many volumes/datasets do you do HSM backup for? It maybe that 4320
Cylinders is
We will be installing a z10 next month. I am trying to find the little
gottcha's that people have identified.
Such as changes to IEAOPTxx for instance.
Anyone have anything else that might be good to know?
I am searching the archives, but that will take a little while to go through.
Any
Could you include the error message and/or display of the device?
Lizette
I have a problem with the console device; is it possibile to unpin the
device associated to the console??
--
For IBM-MAIN subscribe / signoff /
I think this is what you want to do.
An example I wrote does the following:
The proc is called TSTPROC
//MYPRCTXT PROC
//*
//COPYIT1 EXEC PGM=IEBGENER
I found this note in the Init and Tuning Guide (z/OS V1.9) under CONSOLxx
The system pins UCBs for console devices defined in CONSOLxx at IPL time, and
the UCBs are only unpinned when a console definition is removed using the
console removal definition service, which may be invoked using the
It looks like he may have many bad records on his BCDS that have not been
deleted in over 3 years. Which probably explains the size of the BCDS
dataset. I think the AGE=2993 may be the point when EXPIREBV may have had
problems.
When I had a similar issue, I got very conservative and worked with
John,
In PDFs you can sometimes do a SAVE AS command and save it as text. It is
not pretty (no formatting) but you could get the information to paste to
somewhere else.
Lizette
-Original Message-
McKown, John Wrote
-Original Message-
From: IBM Mainframe Discussion List
I am having a bit of trouble with ADOBE READER 9 and PDF Manuals.
I have customized my folders to show the TITLE of the PDF. Under XP this
worked great, but from some reason the same setup shows blanks ( or nulls)
for TITLE when I pull up the folder.
Any guidance out there for how to get
On Tue, 5 Jan 2010 09:29:02 -0500, Lizette Koehler
stars...@mindspring.com wrote:
I am having a bit of trouble with ADOBE READER 9 and PDF Manuals.
I have customized my folders to show the TITLE of the PDF. Under XP this
worked great, but from some reason the same setup shows blanks
I am not sure you can do this. An ML2 tape is created by DFHSM and
information contained on the MCDS as to where it came from and what TAPE it
is on. So you might need to using something like ABARs or put it on DASD
for HSM to migrate to L2.
Lizette
I have a tape dataset I would like to
At DR you may need to do a DISCONNECT on your VCAT catalog. We ran into a
problem where at DR (same as your setup) we kept getting a message about a
Library and we did not have one. The DISCONNECT of the VCAT corrected that
issue.
Lizette
T. M. Ioia Wrote:
We just recently started using a
I should be more clear - VOLCAT VGENERAL catalog (my term VCAT for short)
Lizette
Subject: Re: 3592 standalone drives at DR Site
At DR you may need to do a DISCONNECT on your VCAT catalog. We ran
into a
problem where at DR (same as your setup) we kept getting a message
about a
Library
Eric I do not know of a facility in DFSMS called IGC There is IGG and IDC
but no IGC.
This probably is a typo at your shop.
Do you know when that facility was added? Or could you send a listing of it
to this list?
Lizette
Hello all,
We have a profile in RACF in the facility class
If you have a job scheduling package, it can submit jobs based on dataset
creation. Or can do a few other tricks.
Or you can write a clist or rexx or sas or easytrieve that will figure out
if the creation date is within a date range.
There are probably other solutions as well.
You could also
I have a task to create some code using OPS/MVS. I think a very long time ago
I had a design document that helped me flesh out the details.
IIRC - it had 3 or 4 sections. The purpose, the requirements, the what-it-does
and perhaps a flow chart (as I said very old)
What is being used today to
If you are having issues, it is best to open an ETR to SMP/E in IBM. They have
always been very helpful to me when I have hang issues.
It is had to know if the IBM servers are having problems for this request. But
IBM SMP/E can find out for you.
Lizette
All,
Has the website/process
I am trying to remember how to see who and when an alias was deleted.
I was going to use DAF but I was not sure if it could tell me this information.
I was then going to go after only the SMF 17 records but was not sure if that
would include the alias entry.
What is my best option?
Lizette
Michael,
Thanks for the response. It turned out the alias never existed. So I had
no records for it.
It was a somewhat interesting problem.
The USER= on the jobcard was not a real ID or alias. But when a control
block in LE was damaged, the HLQ for the dataset LE wanted to create the
dump it
Little did I realize I still had the ability to have fun. I recently
(inadvertently) caused a problem in JES2. IBM took the following APAR for fin.
It happened when I was bouncing JES2 to validate and put in place new JES2
parms and had a error on a comment line. I issued CANCEL and JES2
, this probably not going to be an issue.
Lizette
-Original Message-
From: Elardus Engelbrecht elardus.engelbre...@sita.co.za
Sent: Jan 13, 2010 2:03 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: I Broke JES2 - Apar OA31559
Lizette Koehler wrote:
Little did I realize I still had the ability
IBMLink Scheduled Outages
Many of our customers have requested IBMLink to post a schedule of upcoming
outages. This News Item will be updated as necessary to give you advanced
notice. Here is the current schedule (updated on 10/06/09):
* January 15-16, Fixpack deployment (between 8:00 pm
You could probably write a REXX or CLIST and use LISTDSI to get SYSUSEDPAGES
and do the calculation.
SYSLRECL Logical record length
SYSBLKSIZE Block size
SYSKEYLENKey length
SYSALLOC Allocation, in space units
SYSUSED Allocation used, in space units. For a partitioned data set
I am installing CA-ESP and have a few basic questions.
If someone has time to answer a couple of quick questions, that would be
great
For example
It looks like it dynamically creates dataset based on a parm - APPLFILE If
so, how is space handled?
Lizette
When the manual says $T command or cold start, I use the $T command to make
the change and then update the JES2 parms to reflect my change. That way it
is permanent. It will only go away the next time you cold start JES2,
otherwise it is always there.
At startup (WARM, QUICK, or HOT) JES2 will
There is a DB2 Newsgroup that this might be better posted to.
Go to this link and join (its free) if you have not already.
The IDUG DB2-L Listserv is only part of your membership in IDUG. If you are
not already an IDUG member, please register here
http://www.idug.org/register
Lizette
Rather than using OUTTRAP allow the output to go to your terminal with trace
?i. This way you can see what is or is not working.
With vsam all messages that go to SYSPRINT could help in identifying your
issue. It maybe that you did not do an ALLOC DD(VSAMKSDS) or freed
SYSPRINT.
The messages
Albert,
These outputs - are they from a remote device? They look suspiciously like
an RJE names or perhaps RDR names.
Could you do a $TO?(xx),LONG and send it to the group?
? = S for STC, T for TSU and J for Job
x the number of the task.
Thanks
Lizette
Here is what I might do
I might go ahead and in SDSF or with a JES2 command, route the job back to
local on HOLD. Then route it to your node, then release the job.
Hold Jobs
Route to Local
Route to JES2DMVS
Release Jobs
That might clear up things if there is any discrepancies in JES2.
Lizette
Albert,
You are welcome.
Lizette
-Original Message-
From: Albert Venetitay albert.veneti...@numericable.com
Sent: Jan 22, 2010 12:29 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Help JES2 : Release sysouts with status user
Lizette,
Well it worked fine, your idea and suggestion i.e , hold
I am not strong on IP and server stuff, so I have a question I hope someone
can answer
We had two things go on tonight. One was a cpu upgrade from z890 to z10.
No big deal.
However, during this time we also had a six hour internet outage. Some
upgrade that required a larger outage than
EKM is on z/OS - I plus a DNS or IP address in to my tape library and in IOS
through the IECIOSxx member of parmlib.
Though it is rare, our whole internet/intranet connection was out for an
extended period of time. I was hoping there might be some way to keep EKM
happy on the mainframe while
Nigel,
With SMS it can only issue certain commands. There is not CMD function that
I know of is SMS. So it needs to be able to Modify OAM so it can sync things
like TAPE
It needs to be able to activate an SCDS or ACDS data set.
You also need (as a person) the ability to issue V SMS
I am not sure but I think the LE might be getting into your way if you are
trying to create a different return code if it something like an S0C4 or
S0C7.
Let me know if I do not understand.
Currently your assembler program may get an S0C7 but it will produce a
different return code? Is that
The ARC1151I indicates that there was another DFHSM function active for this
dataset.
The DFHSM Log or PDA may have some additional information. I am not sure
that SMF would be helpful.
Look at ALL DFHSM STCs to see if perhaps a recall and backup or dump were
occurring at the same time for this
I had a problem this weekend when operations installed a new INFO Print 4000
printer.
The $ADDFSS was good
The $ADDPRT was good
But when they finally got to testing the printer they got a FSS Failed to
Connect.
It looks like we missed a Dataset for the PSF printer that is coded on
--Roger
[---]
On Sun, Jan 31, 2010 at 2:50 PM, Lizette Koehler
stars...@mindspring.comwrote:
I had a problem this weekend when operations installed a new INFO
Print
4000
printer.
The $ADDFSS was good
The $ADDPRT was good
But when they finally got to testing
environment.
Lizette
Lizette,
This STC is not shared by other LPARS. Thanks for your help.
--- On Mon, 2/1/10, Lizette Koehler stars...@mindspring.com wrote:
The ARC1151I indicates that there was another DFHSM function active for
this
dataset.
The DFHSM Log or PDA may have some
Could you let us know which manual you found it in?
Lizette
Never mind. It was in the manual.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET
Is this volume defined in a VATLSTxx member? Is it part of an SMS group?
Lizette
I am trying to change the status of an online volume. It is mounted as
PRIVATE and I want to change it to PUBLIC. I issued the following mount
command:
M A3FD,VOL=(SL,WRKC14),USE=PUBLIC
However, it failed
This is so the SVC Dump process will use the volume MVSRES and use the dump
dataset name of SYS1.SYSNAME..DMPSEQ.
Here are my parms
COM='DD ADD,SMS=(S=SYSTEMS) ADD AUTOMATIC DUMP TO SMS STORGRP'
COM='DD NAME=SYS4.SYSNAME..DMPSEQ..JOBNAME SET DUMP SYMBOLICS '
COM='DD ALLOC=ACTIVE
Always helps to have a subject line.
Have you looked up the HASP690 message?
It states:
A command was entered by an operator or from a console that lacks sufficient
authority to issue the command. If JES2 is unable to obtain messages from
the security product, the $HASP687 message is issued;
I was not able to get to it through the link provided.
However I did find the z/OS V1.12 Announcement letter here
http://tinyurl.com/ylo3ykj
Lizette
On 02/09/10 06:41, Michael W. Moss wrote:
http://www-01.ibm.com/common/ssi/rep_ca/8/897/ENUS210-008/ENUS210-
008.PDF
I have been working on the new version of DAF.
When I assembler it I get an RC04 on the Macro IGWSMF at AO25205 level for
my z/OS V1.9 system. Is that okay? Or should the macro resolve correctly?
I will send the error message if you need it for the IGWSMF macros.
Second I downloaded the
I believe there should be careful consideration when replacing products. Basic
cost is one, but there are others.
Are you looking for something that can read Easytrieve and not require a
conversion?
Are you going to provide training to those that are currently using Easytrieve
but will need
If you want to backup non z/OS stuff to the VTS it is probably doable if you
look at FDR Upstream for that function.
A little cable to your smaller boxes and this software may do the trick. I
had hoped to this at our shop with a TS3500. So far, the little guys are
very resistant.
Lizette
I guess a couple of questions I would have are:
1) All jobs or just some jobs? If so, can you identify them easily or is it a
mix of jobs or output classes?
2) Do you have an automation product like OPS/MVS or Tivoli?
3) Do you want to code a JES2 exit?
Lizette
-Original Message-
In the old days you have the ACCOUNT function in TSO that you could set MOUNT.
In today's environment, I think that is controlled in the TSO Segment of your
security product.
So I would check with your security admins to see if your TSO Segment has MOUNT
capability.
Lizette
I am
I thought the TEST function of TSO could do this as well?
Lizette
Try CBT 149 (UCLA Utilities) or CBT179-181 (Leonard Woren). IIRC there
is a program in (SUPERZAP?) that should do what you want...
HTH,
snip
I have a need to zap core, but my client does not have OMEGAMON. I
searched
the
Rex,
I would check with CA. The messages appear to be an annoyance but not a
problem.
A quick look through their knowledge base turned up several hits for IDMS.
Once such hit was:
Title: MESSAGES CEE3792I AND CEE3790I WRITTEN TO LOG
Description:
NOTE: The lowest maintenance level to which
Depending on your level of z/OS you might want to look at the PROCLIB statement
in JES2. It might help in these types of situations.
Lizette
i marked the line below and jes2 start successfully :
//* DD DSN=CSQ700.SCSQPROC,DISP=SHR
this line is under proc00 on the jes2 proc, until
You could use an OUTPUT statement to send print to two places, one the printer
queue and the other a held sysout queue if you like.
Or you can use SDSF to PRINT to a file or SYSOUT.
Lizette
Hello all, is there any way to print a spool file and then retain it in
the spool after it prints? I
I guess that will depend.
Are you doing a push-pull? So only one Tape Type will be active at one
time?
Are your ACS routines reviewed?
I did not change my esoteric name, only the device addresses defined to that
esoteric when I moved from STK to VTS. So TAPE had B00-B25 in it and I
had
One thing you could do ? the job, then SORT DDNAME on the command line, then
everything is together.
Or a process could be built with the SDSF REXX interface to collect all the
stuff.
Does that help?
Lizette
-Original Message-
From: Thompson, Steve steve_thomp...@stercomm.com
Sent:
FILTER DDNAME JESMSGLG
FILTER DDNAME OUTDD
FILTER OFF to see them all
MERGE POSTS
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lizette Koehler
Sent: Friday, March 12, 2010 1:22 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: SDSF DOC for USER
releases). But this is the guy I was looking for.
Thank you very much.
Steve Thompson
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lizette Koehler
Sent: Friday, March 12, 2010 2:09 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: SDSF DOC for USER
You can use the LOG command in SMPE
Chapter 13.
In addition to the messages written by SMP/E, you may want to store messages
in the SMPLOG, such as why a SYSMOD is being installed and who is installing
it. You can do this using the LOG command.
Lizette
We have a problem attempting to
I have been asked if it is possible to take a PDF and load it on the
Mainframe for printing.
I think it is, but I am not sure where to look to see if there are any
additional products we need.
Can anyone point out where I can begin?
Lizette
We are currently using INFOPRINT 4100. It is not currently setup as a
network printer. Hence the need to load the PDF on the mainframe before
printing.
I was thinking I could put the PDF in the USS files in Unix and then find an
inexpensive (free??) process to send the PDF to the mainframe
Yes, that is correct.
I currently do not have DFS, NFS or SMB active in my environment. So I
would need something like FTP to get it into the Unix on z/OS. Of course I
am assuming that I would need to load the PDF on the Unix system in z/OS
before anything else could happen.
There is also a
We use Extreme Dialog for forming the bill, but that is done on Windows.
So the bills come up from windows where Extreme can do the transformation to
print.
However, this is after this process, when the printing is done, some of the
images get rejected. It is those images that need to be
Can you provide a DDDEF list from your global, tlib, and dlib environments?
That would help us to understand your environment better.
Lizette
I only have one CSI that contains all zones. The SMP SCDS, LTS, MTS, and STS
are the same for all target zones. Each target zone has its own target
Only the SMP* type datasets name.
Lizette
Thank you for offering to help. What information are you looking for in the
DDDEF listings? I ask because it could be hundreds of lines of output to look
at.
Luke
Can you provide a DDDEF list from your global, tlib, and dlib environments?
I am not sure what this is trying to tell me. Does this require TSO be cycled?
Or just the TSO USERID logoff and back on?
IKJ579I
CANNOT EXECUTE SEND
Explanation:
The SEND command handling routines are unable to perform their functions for
one of the following reasons:
* There is an
Allan,
Thanks. We have on Brodcast dataset (SYS1.BRODCAST) and we have just installed
ESP which has over loaded this file. I am trying to get my team to go with
individual Brodcasts which I believe will correct my problem.
I just don't understand why IBM cannot do better with these older
Is this for Mainframe, Unix, Linux, ...?
There is also the REXX-LA website as well
http://www.rexxla.org/
Lizette
Is There a REXX list?
John Norgauer
--
For IBM-MAIN subscribe / signoff / archive access instructions,
I am not sure I have seen that before.
Sometimes IBM recommends tools that are internal to them. But they think it is
common.
Lizette
This is for Z/os REXX. I had a suggestion from an SCLM IBM'er to do the
following on a VSAM file:
Use the VERLIST and VERDEL sevices to read the VSAM
I am not sure I have seen that before.
Sometimes IBM recommends tools that are internal to them. But they think it
is common.
Lizette
This is for Z/os REXX. I had a suggestion from an SCLM IBM'er to do the
following on a VSAM file:
Use the VERLIST and VERDEL sevices to read the VSAM
Mark,
That would be great. Either or both (website or CBT Tape) would be acceptable.
I was looking into writing something like this for our DR process.
Lizette
I have something similar I wrote for DR. Instead of dumping the
spool and restoring to a test spool back at the home shop, or
Have you check out your MSTRJCL setup? Is the proclib that JES2 is in, in that
concatenation?
Lizette
Hu Lei Wrote:
Hello world!
I am trying to setup a mini system, and during IPL, I have met JES2 start
error. I am suffer from this error for days, I have do all I can image to
correct
I was wondering if starting JES2 with SUB=MSTR be of any more help on this
issue?
Lizette
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Dave,
Are these 1.11 volumes just the install libraries? Or are they from an
actual working z/OS V1.11 system?
There may be an issue if z/OS V1.11 SMS had touched these volumes and you
are trying to use them under z/OS V1.9 SMS.
Lizette
I seem to have a looping Incremental Backup task in
From my perspective, I have DBAs and Programmers that want to know what is
currently installed. Currently they have to contact me and make a request, I
then pull the SMP List, MCS and Applied information for them.
If they had LIST capabilities ONLY, then I could can a job for them to run
and
Sunil,
What kind of dump? Application, Operating System? Stand Alone Dump (SAD)?
There are many Redbooks you might be able to use.
For concepts see the Redbook - The New Mainframe
http://www.redbooks.ibm.com/redbooks/pdfs/sg246366.pdf
For WebSphere
I am curious how the dataset is being update? Is it with a homegrown process
or a vendor supplied utility? (IEBCOPY, IEBGENER, etc...)
PDSMAN as others have pointed out is only reporting the issue, nothing else.
I am not clear on how the file is updated.
Could you provide more detail on the
I have done this in the past. All I would suggest is that the output Seq file
have a BLKSIZE=32760.
DFDSS does not care, but I think FTP likes it better when the blksize is
understandable.
Lizette
Tim Brown Wrote:
DFDSS can dump all files with say myqual.*.** to a seq dataset.
I want
If you have a product from DTS Software called EASYEXIT, it could do this.
You might have a submit exit (IKJEFT10???) that could do this.
If you have Thruput Manager, it might do this.
There could be a JES2 exit
Or there might be a converter exit.
Check with your SYSPROGs and see if they can
This has been discussed in the past here.
I am sure Steve Comstock will respond to you.
But you need to know about the operating system as well as the Vtam
(Commnication Server) side of things.
So you can contact Steve for his training programs, or IBM or CA or many
others.
Knowing where you
I am trying to determine the best way to inventory OPS/MVS environment.
I have inherited this product, so I am now trying to pull together the
MSG/REQ/CMD/etc. stuff into a cross reference.
What affects production batch and what affects system function.
I am currently do this manually,
Alan,
In OS/390 V2.9 (I think) IBM provided an mvs command called CMDS. It can
display or remove various types of MVS commands from the queue.
You might want to put a trigger in place to issue the CMDS SHOW when this job
starts to see what all else might be going on.
CMDS D or CMDS DISPLAY
You can probably download and use the IBM Tape tools found here
ftp://ftp.software.ibm.com/storage/tapetool/
Lizette
MONTERO, ENRIQUE Wrote
Hi to all,
Is there some way to get from RMF or SMF the total write/read Gb(or Mb)
by tape drive?
Do you have some sample? So I can
PDSMAN has a facility called FASTCOPY that will intercept the call to
IEBCOPY (This is in the PDSMAN Parms) and use FASTCOPY instead. You can
tell when FASTCOPY is used because in the SYSOUT instead of IEBI
messages you will see FCOI messages. So you might have PGM=IEBCOPY
coded, but
Let me add one more point.
If you have PDSMAN and it is intercepting IEBCOPY. If the STC for PDSMAN is
down you would only see IEB messages and not FCO. And this could create
some interesting issues.
If you do not use PDSMAN's Fastcopy, then having the PDSMAN STC down would
be less of a
Peter,
If the expectation is that PDSMAN's FASTCOPY replaces IEBCOPY, then yes, a
change to the $IEBCOPY statement in the parms could have an affect.
Determine the following
1) Is there an LMP Key for FASTCOPY?
2) What was the change that required NEWRULES? Can you compare the
previous parm
I will be interested to know what the final resolve will be.
Please post when you have that answer.
Lizette
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Peter Nuttall
Sent: Friday, April 16, 2010 10:07 AM
To: IBM-MAIN@bama.ua.edu
What was used to restore the dataset? FDR, DFDSS, ??? Some have RENAME
capability that can be used to put it down as a cataloged vsam dataset, then
you could copy (REPRO) to the correct dataset name.
There is also a RECAT option on the DEF VSAM function. You might want to
review that.
Lastly
What you might want to try is getting into ISPF in TEST mode.
If you look it up, I think the Syntax is ISPF TEST.
This might give you a more pertinent dump.
The other option is to use ISPVCALL to trace the ISPF application.
Lizette
Dave Day Wrote
I have an ISPF application where
I am trying to understand what this message is telling me and if it is serious.
IOS581E LINK FAILED REPORTING CHPID=11 328
INCIDENT UNIT TM=0MDS9K/509 SER=CSC00-0989C3 IF=00E4 IC=03
INCIDENT UNIT LIF=E4
), the path to view the
FICON
events was Logs -- Switch Resident -- FICON Link Incidents
Brian
On Mon, 19 Apr 2010 17:46:54 -0400, Lizette Koehler wrote:
I am trying to understand what this message is telling me and if it is
serious.
IOS581E LINK FAILED REPORTING CHPID=11 328
Have you contacted IBM. Sometimes the fault is on their end, not yours.
Lizette
I connected the certificate. If you look at the output, it says so.
Gadi
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Walter Marguccio
Sent:
My understanding is that this issue goes away (or is mitigated) with z/OS
V1.12. Indirect cataloging is available for VSAM in 1.12 but not before.
Our process is to have the zFS on a separate volume and use the SYSR1 to
handle the various datasets at IPL.
For example.
SYS1.OMVS.ROOT.Z19RS1
Another thought might be an automation solution.
If the IEF message has FTP in the statement for this specific mount or there is
a way to determine that this flavor is for FTP, then you could have automation
(like OPS/MVS) trap the messages and automatically reply CANCEL.
Lizette
Fred
I had an interesting message come out of JES2 to night when CA Dispatch was
starting up.
The HASP473 with TYPE=B32K
I am not finding much in the JES2 Books on this issue. I am guessing that
since there was only one occurrence we are okay.
However, where would I find more information
$TBUFDEF,EXTBUF=(LIMIT=...) to
bump up the limit and restart CA Dispatcher and see if it makes much
difference.
Cheers, Ant.
Northern Territory Government, Australia
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Lizette Koehler
IBM came back with an answer. I will be monitoring the CA Dispatch STC.
Should we see this again, we will look at raising its Region size.
Here is their response:
The HASP473 message with RC=0 is primarily informational. The cell
pool get for B32K is from the SAPI SSI which is called
Matan,
I guess I would need to know more about your environment.
For windows - what version
From mainframe - z/OS V1.??
Do you have other products like NDM, XCOM, etc on Mainframe/Open Systems???
Do you use IE, Mozilla, filezilla on Windows?
Do you have any limitations on the Server for
I have a project to review all the virtual tapes in the VTS and see which
tape datasets could go on dasd.
I am using CA1 to get the LRECL, BLKSIZE and BLKCNT to determine how many
bytes are on the tape. Then dividing that by the number of bytes per track
to get a rough estimate.
Is there a
Mount Analyzer?
It's free and you already have it (or as someone is bound to point out,
you already have so you're already paying for it.) Point is, it will do
what you want at no extra cost.
Thank You,
Dave O'Brien
NIH Contractor
From: Lizette Koehler
So, if I understand your requirements, it looks like you are creating a
tapeless backup solution to your servers from the Mainframe DFDSS dumps.
The amount of data will be between 2-27GB with 700GB total possible weekly.
How are you creating your DFDSS dumps? Do you use BLKSIZE=32760 on the
1001 - 1100 of 1752 matches
Mail list logo
