(PRIMARY) (SECONDARY) *
SSID CCA LSS SSID CCA LSS*
DEVICE LEVEL STATE PATH STATUS SERIAL# SERIAL#*
-- - -- --- -- *
1321 .
Wow!
Thank you for this recipe and information about JOINKEYS. I had to play a bit
with REFORMAT to understand it and get what I need.
Before you post this, I have already found SPLICE example 8 in the same
publication and was also able to get the results I wanted. I would never come
to
Is there z/OS (ISPF) tool that can check if all lines of dataset A are
contained in dataset B? In other words, is there a tool that could check if
dataset A is a subset of dataset B, where A and B are sets of records (lines)?
I can accomplish it using COMPARE ISPF edit function or SuperC
Are there discussion groups similar to IBM-MAIN that are devoted to
Mainframe automation tools?
For Tivoli System Automation for z/OS and Tivoli System Automation for
Multiplatforms
you will find links on the last page in the System Automation for z/OS: 101
Service Guide, IBM System z10 Enterprise Class (GC28-6866-05)
http://www-01.ibm.com/support/docview.wss?uid=pub1gc28686605
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu
SYS1.MODGEN(IARRAX)
Thank you!
I see I haven't done my homework properly. I've searched ibm-main archives and
internet, but failed to look in the SYS1 datasets.
Have a nice day!
--
Zaromil
--
For IBM-MAIN subscribe /
Is there any possibility to check if CRITICALPAGING is enabled for an address
space?
(z/OS V1R12)
The function is enabled in the COUPLExx member.
--
Zaromil
--
For IBM-MAIN subscribe / signoff / archive access instructions,
On Tue, 27 Jul 2010 10:31:08 -0400, Richards, Robert B. wrote:
Thanks for the pointers. So far, my best source is the reason I am
documenting them now: the paper called System-Managed CF Structure
Duplexing. I am in the process of identifying what should/should not be
duplexed and thought I would
On Thu, 22 Jul 2010 08:27:28 +0200, Vernooij, CP - SPLXM wrote:
To explain this trick a little more: putting your cursor on a column header
and pressing Enter sort the list on that item. This again is a short form of
the sort prompt (or any other column) command.
And sort prompt is short form of
On Tue, 13 Jul 2010 11:39:23 -0500, Casey Rhodes wrote:
...
Today we activated a new CFRM policy that caused some of our duplexed
structures to go pending. The only way I could find to resolve this is the
reallocate.
I know maybe I am being picky but dont really like to do the reallocate and
On Tue, 1 Jun 2010 02:56:38 -0700, Mark T. Regan, K8MTR wrote:
Anyone know where I can lookup info about this 3270 error code, prog695?
The tn3270 client vendor does not supply any info about it nor has any
Google or IBMLink search turned up anything.
If it is the same code and meaning as in
On Wed, 26 May 2010 15:01:51 -0500, Brian Peterson wrote:
We replicate all JES2 data sets (spool, checkpoint, etc) to our remote site,
and we have NEVER failed to warm start JES2 using our asynchronous DASD
replication solution - a solution which also guarantees consistency.
If the DASD
On Tue, 25 May 2010 14:05:08 -0500, Chase, John wrote:
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of John H Kington
snippage
Visualize it with these parameters:
INCLUDE COND=(1,6,CH,GE,C'SMITH ',AND,1,6,CH,LE,C'SMYTHE')
Show how, e.g., c'SMILEY' in
On Mon, 19 Apr 2010 05:14:09 -0500, Barbara Nitz wrote:
You may run into problems with the LOGR CDS. Check out II5 if that
applies to you. IIRC, the problem was going forward in time for LOGR.
Where can I find II5? Technical help database answer I get is:
No documents match your query.
We have done quite a lot of DR testing in the last year and a half. We
defined all coupling facilities in our active CFRM policy, the same way Alan
C. Field described, and never had a problem IPLing our sysplex. The only
difference is that we start JES2 with RECONFIG parameter, to set the CKPT1
Last weekend we had daylight saving time change, going from CET to CEST
(i.e. our time zone was CET -- UTC+1, now CEST -- UTC+2).
We are STP-only CTN, total of 3 z10, CTS = PTS = CEC dedicated to coupling
facilities
Coupling Facilities are spread over all three CECs.
As I read Coupling Facility
On Thu, 31 Dec 2009 01:22:16 -0500, Gerry Palmer gpal...@mindspring.com wrote:
Is there any way to convince DFSORT not to bother reading the rest of
the input once the ENDREC value has been exceeded?
Did you look at STOPAFT:
Use STOPAFT to specify the maximum number of records to be accepted
- DS8000: Architecture and Implementation redbook states that
If many LSSs are involved, then pick a quiet time to perform the SETIOS
HYPERPAV=YES command ...Because it can take some time
to initialize all needed LSSs ...
Is there a way to get an estimation on time needed per LCU ?
On Mon, 16 Nov 2009 14:43:44 -0600, Paul Gilmartin wrote:
Skeptic that I am, I'd be very interested in seeing the header
line that you trimmed, akin to the one I posted:
SDSF EDITHFSMAC (JOB00503) JCLEDIT Columns 1 00072
** * Top of
On Thu, 24 Sep 2009 17:40:13 -0500, Glen Gasior wrote:
*
Has anyone experienced no NIP console and no MASTER console with an IBM
2074 ?
*
During a D/R exercise the NIP console failed to appear on the PCOM emulator.
It was available at the HMC software console. The IPL proceeded using the
HMC
Does anyone have any experience in defining a Cascaded CISCO Ficon switch
in HCD?
I believe that we need to know both the Domain ID of the Switch and the
Switch Address, but we are unable to determine what the Switch address is?
Documentation on the Internet (an IBM redbook!) states that Switch
Hello!
Playing with the dynamic screen size(s) and customizing my PCOMM sessions I
tried to establish a connection to OSA-ICC and open an MVS console session
as model 5 (ScreenSize=27x132). It worked without problems and it was my
understanding that the screen size defined in the PCOMM
On Fri, 19 Jun 2009 14:16:47 -0500, Dave Kopischke
dgkopisc...@oppenheimerfunds.com wrote:
On Fri, 19 Jun 2009 15:02:12 -0400, Swanson, Curt wrote:
Dave,
The 'WLMPAV' value of 'Yes' is correct for both Dynamic PAV HYPERPAV.
The setup is the same for both; the only difference is the HYPERPAV
On Tue, 2 Jun 2009 22:27:11 -0500, Cwi Jeret cwi_je...@yahoo.com wrote:
Given the following working configuration -
snipped
Now I want to let LPAR B work with the same IODF-IOCDS configuration
on an seperate Disk device with the same addresses !
( Chpid and CU 300 CUAD 1 - left as is ) like
Hi Gadi,
That works if you know the file name.
How do I ask: Find all the members in all the PDS's on disks who name
begins with TSO and contain the string GABI (That is what my user wants to
know).
just use the empty Dsname Level field and generic Volume serial like
TSO* or TSO% etc. It works
On Fri, 16 Jan 2009 10:02:19 -0600, Tom Marchant wrote:
If you perform a soft activate only, everything will be fine until you IPL
again. Then, because you didn't do a hardware activate too, you will get
the old IODF, from before you changed the esoterics. That's because the
soft activate
Does Z/OS 1.8 and above still support the 3278 device type and is only the
hardware support for the real physical 3278's dropped?
Any idea where i can find thios on the IBM site?
To check the support for 3278 device type I would look in
HCD ---
7. Query supported hardware and installed
Hi Radoslaw,
From the other hand - what about MCS consoles? Two concurrently running
systems (LPARs) cannot use same device as console. Assuming monoplexes.
We also have OSA-ICC and all our LPAR use the same two device numbers for
MCS consoles. But, these are NOT same devices: MIFID - Device
On Tue, 23 Dec 2008 03:07:44 -0600, Parin Gangar wrote:
The dataset has following details -
Device type . . . . :,3390
Record format . . . :,FB
Record length . . . :,1526
Block size . . . . :,7630
1st extent tracks . :,15000
Secondary tracks . :,1500
Current Allocation,
,Allocated tracks .
On Tue, 18 Nov 2008 10:54:42 -0500, Mark Pace wrote:
Mark,
snip
... I did look at his PDSPROF and found this L WKLW.ZVWARN2 but I have
no idea what that means or if it's truely related.
/snip
What application creates PDSPROF? Is it a member in ISPF profile (I don't
have one with that
On Thu, 30 Oct 2008 10:12:06 +0800, Tommy Tsui wrote:
After I try to activiate the CBU from 2094-401 to 2094-707, the LPAR
cannot be IPL successfully because of 878 until I set the INITSQA. Is there
any overhead while CBU activiated? How comes we need to add the default
SQA/ESQA to NIP
Hi!
We use the Change LPAR Security task (under CPC Operational
Customization in a Single Object Operation) to display and modify security
controls for all LPARs on a single CPC.
We encountered the following problem: if we take away Input/Output
Configuration Control from some LPARs and then
Hi Kevin,
Are your spare volumes defined with WLMPAV=YES in your I/O config? Or, is it
possible to disable dynamic alias management for certain volumes directly in
the STK box?
--
Zaromil
--
For IBM-MAIN subscribe / signoff
On Thu, 18 Sep 2008 16:34:05 +0200, John Ticic IBM-MAIN wrote:
You can also use the SETIOS command.
Once the LCUs have been converted, the other LPARs can't move the aliases
around. The IBM documentation states that they are ignored.
RMF will show you the LCU and HyperPAV activity. The MVS
How can I query the DCB parms (RECFM , LRECL ) for an existing file via
FTP ?
You mean something like dir?
ftp dir cntl
200 Port request OK.
125 List started OK
Volume UnitReferred Ext Used Recfm Lrecl BlkSz Dsorg Dsname
CTST21 3390 2008/08/25 1 15 FB 80 3120 PO CNTL
250 List
Radoslaw,
snip
3. Fake definition of devices.
Devices 400-4F0 connected to CU 400 (OSE). CU 400 is logically connected
to chpid 10 on CPC A and 10 on CPC B. This is obviously fake, but it is
accepted by HCD. However: will it work?
In our shop all lpars in all CECs use the same device addresses
On Wed, 7 May 2008 12:55:47 +0200, Frank Allan Rasmussen wrote:
Are there any rectrictions or recommendations about PPRC (metro mirror)
and volumes with page datasets?
Good ide, bad ide, some performance impact, recomented?
It should be a prerequisite for a GDPS HyperSwap. For the HyperSwap
Thank you for all your answers and hints!
1. Trimming the trailing blanks:
Unfortunately I do not have any RegEx-capable program at work and UltraEdit
is not in our software catalog.
Anyhow, I've got the following Information offline:
- snip -
Hi, i normally use Notepad++ (free
On Thu, 24 Apr 2008 13:31:59 -0700, Edward Jaffe wrote:
Interesting. I also use 62x142 with a modified color scheme. My
background is light gray -- I found white a bit too harsh. Never thought
to turn on the cross hairs. (I might try that for a while to see how I
like it.)
I find light beige
Does any user of IBM PCOM know a way to change the cut and paste
behaviour so that trailing blanks are (automatically) stripped off?
I have found no parameter to do that. So, if I want to paste something from
the screen into a mail, the easiest way I found is to copy the data into a
variable
On Thu, 6 Mar 2008 13:54:36 -0500, Mark Pace wrote:
From z/OS 1.9 MVS:Planning Global Resource Serialization.
These links can be either a data link in a parallel CTC adapter. In ring
mode, link or CTC link means either an IBM 3088 data link, a parallel
CTC adapter, or an ESCON(R) channel
On Mon, 3 Mar 2008 16:29:43 -0500, Arthur T. wrote:
- snip -
This may not be the best way to validate. Check out
the results of the following, which is a very slightly
modified version of my previous example. At least on my PC
with Regina REXX, it gives unexpected results.
On Tue, 4 Mar 2008 12:31:01 +0100, Vernooy, C.P. - SPLXM wrote:
- snip -
Yes, as I understood too, it is fully managed by the hardware, not by
WLM. So this means that ASM may have to compete for exposures.
Possibly/hopefully ASM's I/O priority will give it the needed advantage.
Otherwise
On Tue, 4 Mar 2008 14:34:03 +0100, Barbara Nitz [EMAIL PROTECTED]
wrote:
good catch! I don't suppose oa20749 will correct this oversight, too?
My understanding was that it should be enough to define devices with
WLMPAV yes
in the HCD. We have this but I don't know how to check if it helps.
Do ASM algorithms support two I/Os to a page data set on a HyperPAV base
volume? If yes, are the aliases fixed, as in the case of dynamic PAV?
--
Zaromil
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
On Mon, 14 Jan 2008 21:17:15 -0600, Walt Farrell ... wrote:
snip
If I have a VB (or even an FB) with a larger LRECL, it shouldn't take
handstands to copy!
For VB, I agree.
For FB, how would you like the output padded? Blanks? Binary zeros?
One of those will be incorrect for some
On Wed, 9 Jan 2008 22:13:13 -0600, Bruce Baxter ... wrote:
ftp directly between the two systems, quite simply isn't an option. Our
business partner chose the mechanism in palce to deal with multiple other
shops, and they're not likely to want to do this sort of one-off thing for us.
And how
Does anyone know of a way to FTP the DUMP file back to a zOS system so it
is readable?
Using Windows as a client and z/OS as a server the following works for me for
tersed datasets (binary ftping in both directions):
ftp quote site lrecl=1024 recfm=fb blksize=6144
200 SITE command was
On Wed, 7 Nov 2007 15:42:54 +0900, Timothy Sipples wrote:
snip
Finally, there is the fact that software engineers -- or at least human
factors engineers -- apparently never reviewed ASCII. As we all know,
EBCDIC puts the letters in the correct numerical order, collating uppercase
and
On Tue, 23 Oct 2007 08:54:31 +0100, Kenny Fogarty wrote:
I agree, but, if the wrong date, or IPL parm, or whatever is entered,
then the chances are you're going to have to re-IPL to rectify the
situation. As you said above, if RACF doesn't start, you can go back
to see why, and take steps to fix
On Sun, 30 Sep 2007 13:58:42 -0400, Lizette Koehler
[EMAIL PROTECTED] wrote:
I was just was wondering what might have happened in a SINGLE Sysplex
environment (ie no other sysplexes other than mine) if the response of U was
done.
I would say IXC247D comes every time you try to use a CDS that
Hello!
Anyone on this list having experience with CentricStor? It would be very
interesting to hear
(see) a comparison between CentricStor and IBM VTS based on experience with
both of them.
Thank you!
--
Zaromil
--
For
Gil,
COND=(0,LE) is always true, so any step with COND=(0,LE) will always be
skipped. COND codes can only be positive, so zero is always LE any
possible
COND code.
Not entirely correct, IIRC. If the step is the first step in
the job it will not be skipped. This is mathematically correct
On Fri, 20 Oct 2006 08:55:25 -0500, Mark Zelden wrote:
snip
o Dark figures on a white ground.
As an experiment... I tried this. I changed my background on my
vista emulator to white just like all my email, browser windows
etc. but still used extended colors for the foreground (except
changing
54 matches
Mail list logo