>The tool is improperly counting samples in Pause processing as using CPU
rather than counting them as delays. Strobe had the same issue years
ago, when Pause/Release was first introduced.
MA-Tune has it right, it was me who was wrong: I thought IEAVEPS1 is POST, and
therfore I would not
For CVAF I need the DEB of the VTOC
Sent from my iPhone
> On May 3, 2016, at 7:24 PM, Mike Shaw wrote:
>
>> On 5/3/2016 11:29 AM, michelbutz wrote:
>> Hi
>> ..
>
> Michael, since you said "...what is the VTOC..." it looks like you have a
> long row to hoe..
>
IIRC there's one already coded up on cbttape.org file182 with PDS command.
In a message dated 5/3/2016 6:25:11 P.M. Central Daylight Time,
techsupp...@quickref.com writes:
If you just want space info for one DS, maybe CVAF is better.
We have tried CVAF, BSAM, and EXCP; EXCP with a
On 5/3/2016 11:29 AM, michelbutz wrote:
Hi
..
Michael, since you said "...what is the VTOC..." it looks like you have
a long row to hoe..
To read the VTOC of a DASD volume you can issue a RDJFCB for a DDNAME
that is allocated to the volume, set the DSN in that JFCB to all x'04'
Thanks I am going to try the GTF trace
Sent from my iPhone
> On May 3, 2016, at 9:02 AM, Blaicher, Christopher Y.
> wrote:
>
> Peter,
> Obviously I didn't fully put on my thinking cap yesterday when I mentioned
> the LOCAL LOCK.
>
> I was attempting to think of what
OK, just learned from a colleague who actually read the doc (!) that with the
addition of two lines in , HTTPS is used to download an order
instead of FTP. I missed that tweak. Mea culpa.
downloadmethod="https"
downloadkeyring="javatruststore"
.
.
.
On 5/3/2016 4:30 AM, Peter Hunkeler wrote:
I'm analyzing a job using CA's MA-Tune (similar to Strobe). Question is if
there is that could be optimized. Looking at the MA-Tune reports which are
based on 100 samples per second for 1 minute, I see that the job is seen in
IEAVEPS1 for some 20%.
On 5/1/2016 3:45 PM, michelbutz wrote:
Hi
If a nonpreamtable scope=global SRB does a pause
And another SRB is scheduled does it get dispatched ?
Being non-preemptable means that z/OS won't take control away from the
unit of work without cause. Cause being something like a page fault
Sorry to harp on a question that I've asked before, but I need to ask it again.
We cannot use FTPS here because the proxy appliance we're required to go
through (Blue Coat) does not understand it. We get 'syntax error' from the
appliance with FTPS keywords. We have no problem with Shopz orders
On 5/2/2016 12:54 PM, Blaicher, Christopher Y. wrote:
What parameters were on the IEAMSCHD macros for the two SRB's? If the
LLOCK=YES parm is set on both, then there is your problem.
A Pause is not allowed while holding *any* class of lock. The Pause
request will fail.
Greg
thanks that maybe a lot easier
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Rob Scott
Sent: Tuesday, May 3, 2016 4:36 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Dataset space information
If you need to find the space info for a
I agree. For a single dataset, OBTAIN/CAMLST would be much simpler.
Sent from my iPhone
> On May 3, 2016, at 16:38, michealbutz wrote:
>
> thanks that maybe a lot easier
>
> -Original Message-
> From: IBM Mainframe Discussion List
If you need to find the space info for a single dataset - use CAMLST SEARCH to
get the F1-DSCB and then CAMLST SEEK to process the F3-DSCBs.
For PDS/Es - you need to use FAMS (not a public interface).
For VSAM you can also use IGGCSI00
For bulk dataset info requests - you can use the DCOLLECT
This all started by me trying to find out how space was taken by a dataset DSCB
info which led me to CVAFDIR
It needed the DEB of the VTOC
Maybe I should of used OBTAIN/CAMLIST
Sent from my iPhone
> On May 3, 2016, at 4:09 PM, J R wrote:
>
> The RDJFCB doesn't care too
The RDJFCB doesn't care too much about the DCB other than for the DDNAME and
where to put the copy of the JFCB.
I'm not really sure what you're trying to do. Unless you actually want to
access your dataset rather than its DSCB, why do you want to access the VTOC?
Back in the '60s, this
Okay then the DCB on the open type=j is for the VTOC how about the DCB for the
RDJFCB
The original DCB in my program was for VB
Dataset
I hate bothering everybody is this documented anywhere i.e how to get the deb
of the VTOC
Sent from my iPhone
> On May 3, 2016, at 3:44 PM, J R
>>> On 5/3/2016 at 02:54 PM, Jasi Grewal wrote:
> Greetings, Is there a way to have system bypass dasd volsers duplicates
> during system IPL as I am aware, we can add in IODF as OFFLINE=YES but we
> have many z/OS systems and many DASD which are duplicates.
>
> These
dataset, not damage! (Danged predictive text.)
Sent from my iPhone
> On May 3, 2016, at 15:45, J R wrote:
>
> You should use BSAM, ie. READ, not GET, KEYLEN=44, BLKSIZE=140? (Not sure,
> it's been a long time). Then read until you see your damage in the key area.
>
You should use BSAM, ie. READ, not GET, KEYLEN=44, BLKSIZE=140? (Not sure, it's
been a long time). Then read until you see your damage in the key area. Or, if
you are more adventurous, you could use BDAM and search directly for the key
you are interested in.
Sent from my iPhone
> On May 3,
W dniu 2016-05-03 o 21:06, Itschak Mugzach pisze:
I agree with John. This is a management decision and it will be done with
you or with any other consultant. so, shouldn't it be you?
It depends.
There are activities which are 100% legal, but your conscience have
objections. I'd prefer to not
Something strange is bombed on the open
Message IEC141I the dataset it in the message is sys1.vtoc
The DCB whose DSCB I am trying to access is a VB have that DCB on the open
type=j
Sent from my iPhone
> On May 3, 2016, at 2:35 PM, J R wrote:
>
> Do the RDJFCB first,
I agree with John. This is a management decision and it will be done with
you or with any other consultant. so, shouldn't it be you?
ITschak
ITschak Mugzach
Z/OS, ISV Products and Application Security & Risk Assessments Professional
On Tue, May 3, 2016 at 8:52 PM, John Mattson
Greetings, Is there a way to have system bypass dasd volsers duplicates during
system IPL as I am aware, we can add in IODF as OFFLINE=YES but we have many
z/OS systems and many DASD which are duplicates.
These duplicates are being created by our zLinux Environments and we share the
same DASD
Except the comment is more about expert system interventions (custom
software, paper, tape histories, people) in transactions and moving to a
system that utilizes blockchain to replace "mainframe era" operations. My
own experience in banking, indicates that the process is still full of
processes,
Thanks Ren. I'll check it out.
Bob
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Brenton, Ren
Sent: Tuesday, May 03, 2016 2:31 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Rexx EXEC SHOWALC Panel Member
All I have is a CLIST,
Do the RDJFCB first, *then* move the 44X'4' to JFCBDSNM.
Sent from my iPhone
> On May 3, 2016, at 14:30, michelbutz wrote:
>
> I am still getting return code 4 in R15 CVSTAT is 8
>
> I first move 44X'04' to JFCBDSNM
> I then do a READJFCB FILE
> Everything is okay I
That was the message I got. And I forget exactly but $DPROCLIB gave me I think
something like MSTJCL00, MSTJCL01, then some dataset names.
Cancelling a started task caused it to start right up again.
So my problem was that normally I can work backwards on MVS to find the source
code of the
All I have is a CLIST, sorry: But here it is:
PROC 0
/* SYSTEM.SP.CLIST(SHOWALC)
/* 04-20-93
I am still getting return code 4 in R15 CVSTAT is 8
I first move 44X'04' to JFCBDSNM
I then do a READJFCB FILE
Everything is okay I get R15 = 0
I then do OPEN FILE,TYPE=J
R15 = 0
I then do ICM. R11,B'0111',DCBDEBA
XC BUFLIST(BFLHLN+BFLELN),BUFLIST
OI BFLHFL,BFLHDSCB
MVI. BFLHNOE,1
LA.
Now that we have the panel, I'm missing the EXEC! :-)
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Brenton, Ren
Sent: Tuesday, May 03, 2016 1:24 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Rexx EXEC SHOWALC Panel Memeber
Here is
Thanks Ren! You're the BEST!
*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's
"Willy Jensen" wrote ...
> A started job will not tell you from where it came. On the other hand, it
will also not say instream.
>
> Willy
>
Willy,
If you look at the SYSMSGS of a started job you will still see ...
3 IEFC001I PROCEDURE procname WAS EXPANDED USING INSTREAM PROCEDURE
DEFINITION
Nope.
Sent from my iPhone
> On May 3, 2016, at 13:55, Staller, Allan wrote:
>
> ITYM 44x'40'
>
>
>
> So, as I posted before:
>
> VTOC DSN is 44X'4'
>
> This email � including attachments � may contain confidential information. If
> you are not the intended
ITYM 44x'40'
So, as I posted before:
VTOC DSN is 44X'4'
This email � including attachments � may contain confidential information. If
you are not the intended recipient, do not copy, distribute or act on it.
Instead, notify the sender immediately and delete the message.
Much like any job you take, so much depends on the corporate culture,
personalities, as well as the situation. I am working happily in a
decommissioning situation where their interests and mine match very well.
Were I to give advice to someone entering such a job, I would say insist on
knowing
So, as I posted before:
VTOC DSN is 44X'4'
Sent from my iPhone
> On May 3, 2016, at 12:55, John McKown wrote:
>
>> On Tue, May 3, 2016 at 11:39 AM, michelbutz wrote:
>>
>> I have seen examples in the DFSMS advanced services using
On 5/3/2016 4:50 AM, Peter Relson wrote:
The system will no longer treat it as such after the pause.
So the "globalness" of an SRB is an attribute known only at scheduling
time and not something saved/restored in an SSRB? Good to know...
--
Edward E Jaffe
Phoenix Software International, Inc
Here is the panel we have for SHOWALC:
)ATTR FORMAT(MIX)
@ TYPE(OUTPUT) INTENS(LOW) CAPS(OFF)
! TYPE(INPUT) INTENS(HIGH) CAPS(ON) PAD(_)
)BODY
+SHOWALC --%CURRENT TSO DATASET ALLOCATIONS+---
+
%COMMAND ===>_ZCMD
On Tue, May 3, 2016 at 11:39 AM, michelbutz wrote:
> I have seen examples in the DFSMS advanced services using CVAFDIR one of
> the parameters is the DEB of the VTOC is there a way to get that
> Normally when you open a dataset its in the DCB
>
>
The data extent block
I have seen examples in the DFSMS advanced services using CVAFDIR one of the
parameters is the DEB of the VTOC is there a way to get that
Normally when you open a dataset its in the DCB
Sent from my iPhone
> On May 3, 2016, at 12:15 PM, John McKown wrote:
>
>>
On Tue, May 3, 2016 at 10:54 AM, michelbutz wrote:
> I am sorry dont understand what is the VTOC
> Dataset name, there is another dataset on that volume sys1.vvds.v
> concentrated to the volser
>
SYS1.VTOCIX.aa (aa is _normally_ the same as the volser, but need
I am sorry dont understand what is the VTOC
Dataset name, there is another dataset on that volume sys1.vvds.v concentrated
to the volser
Sent from my iPhone
> On May 3, 2016, at 11:46 AM, J R wrote:
>
> VTOC DSN is 44X'4'
>
> Sent from my iPhone
>
>> On May 3,
VTOC DSN is 44X'4'
Sent from my iPhone
> On May 3, 2016, at 11:30, michelbutz wrote:
>
> Hi
>
> I need to obtain dataset space information
>
> I have been looking at the DFSMS advanced services and there seems like a few
> away of going about this
>
> The OBTAIN
On Tue, 3 May 2016 13:02:43 +, Blaicher, Christopher Y. wrote:
>once SRB #1 did the PAUSE, SRB #2, or any other qualifying unit of work, [is]
>free to run in the address space
It seems to me that whether or not SRB #1 PAUSEs, SRB #2 can be dispatched on
another processor. When SRB # 1
Hi
I need to obtain dataset space information
I have been looking at the DFSMS advanced services and there seems like a few
away of going about this
The OBTAIN and camlist seems like the easiest
As all it needs is a dataset name and volser
The CVAF macros seems like the must current
But I
Chuck,
It does not sound like VIO was ever an option to improve this utility.
I think you identified early on that directory search is the main issue with
this PDS, so your options are PDSE V2, PDSE, LA add/remove.
VIO would be an option if the PDS was smaller, but reading all the members
(1400
> IEAVEPS1 is task Pause, not Post.
>
>> Well that's why it's spending a lot of time there! PAUSE tends to do that to
>> you.
Indeed! Now it all seems to makes more sense: The TCB is being PAUSEd until DB2
finishes its work. MA-Tune finds the TCB not dispatched and looks at the OPSW
in the
Kurt Quackenbush wrote:
>> Including for example SCRT software, Red Alerts and freebies (RACF goodies,
>> RMF Spreadsheet software, et al.) from www.ibm.com?
>No, it only affects "IBM download servers used for all z/OS product and
>service orders."
Many thanks for your kind clarification!
Well, the date for the end of the transition has been announced:
"As of AUGUST 14, 2016, all unsecured connections will be rejected
by IBM download servers used for all z/OS product and service
orders."
Including for example SCRT software, Red Alerts and freebies (RACF
goodies, RMF Spreadsheet
Well that's why it's spending a lot of time there! PAUSE tends to do that to
you.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Paul Streitman
Sent: Tuesday, May 03, 2016 6:43 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re:
> Is it possible that the process being monitored is running disabled or
holding a lock before the POST? When it releases the lock or similar,
MA-Tune will pop out of its wait state and report the first instruction it
sees, which could be the POST.
I doubt. This is a plain normal COBOL
Is there someone that knows anything about this EXEC? I'm missing the panel
member for the EXEC.
*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill
Kurt Quackenbush wrote:
>Well, the date for the end of the transition has been announced: "As of AUGUST
>14, 2016, all unsecured connections will be rejected by IBM download servers
>used for all z/OS product and service orders."
Including for example SCRT software, Red Alerts and freebies
IEAVEPS1 is task Pause, not Post.
Paul Streitman
z/OS Core Components Development
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Is it possible that the process being monitored is running disabled or
holding a lock before the POST? When it releases the lock or similar,
MA-Tune will pop out of its wait state and report the first instruction it
sees, which could be the POST.
Charles
-Original Message-
From: IBM
Peter,
Obviously I didn't fully put on my thinking cap yesterday when I mentioned the
LOCAL LOCK.
I was attempting to think of what might be causing the poster's perceived
condition of SRB #2 not appearing to run in the address space of the PAUSED
global SRB #1.
Your comment seems to be
Thanks so much the documentation for IEAVPSE2 says "NO LOCKS HELD"
Sent from my iPhone
> On May 3, 2016, at 7:50 AM, Peter Relson wrote:
>
> I'll point out that the very fact that a global SRB paused very likely
> means that you did not consider the SRB itself truly to be
Well, the date for the end of the transition has been announced: "As of
AUGUST 14, 2016, all unsecured connections will be rejected by IBM
download servers used for all z/OS product and service orders."
http://www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/FLASH10863
As I suggested in
I'll point out that the very fact that a global SRB paused very likely
means that you did not consider the SRB itself truly to be global. The
system will no longer treat it as such after the pause.
Chris mentioned the local lock. I'm not sure why. You can't pause a work
unit that is holding
I'm analyzing a job using CA's MA-Tune (similar to Strobe). Question is if
there is that could be optimized. Looking at the MA-Tune reports which are
based on 100 samples per second for 1 minute, I see that the job is seen in
IEAVEPS1 for some 20%. IEAVEPS1 is POST, IIRC.
I thought that POST
Thanks for the suggestion. I tried it out as a test and it worked. The only
drawback is that I will have to include the output of the job after the
//SYSUT1 DD *
As a test I tried inserting the dsn as in the SYSUT1 DD * however it did not
work. I got the folowing :
DATA SET UTILITY -
I found that the terminal where the problem was originating, was defined wrong,
and instead of sending a $ it was sending the cent sign.
I changed that, so we'll see what happens.
Gadi
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of
Gadi wrote:
>When our operator issues the command $EPRT1 from SDSF he gets:
>$HASP152 PRT1 COMMAND REJECTED
You have got good replies. Perhaps you're looking up the wrong JES2 manuals.
I have some questions:
Do you have RACF authority or not? JES2 will not show you.
Issue
I looked at the manual.
It's next to useless.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Itschak Mugzach
Sent: Tuesday, May 03, 2016 11:38 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: $HASP152
The msg is not issued as result of
The msg is not issued as result of authority issue but the printer status.
Have a look at the msg manual.
ITschak
בתאריך 3 במאי 2016 11:23, "גדי בן אבי" כתב:
The command was issued, so the operator has authority to issue commands.
The group that the operator is in has
The command was issued, so the operator has authority to issue commands.
The group that the operator is in has CMDAUTH(ALL) and CMDLEV(7)
Gadi
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Edward Finnell
Sent: Tuesday, May 03, 2016
Do a WHO on command line. Look for groupindx. This tells which tier of
Groups the operator is in. The authority is COMMANDs in ISFPARMS..
In a message dated 5/3/2016 1:50:18 A.M. Central Daylight Time,
gad...@malam.com writes:
When our operator issues the command $EPRT1 from SDSF he
Hi everyone,
When our operator issues the command $EPRT1 from SDSF he gets:
$HASP152 PRT1 COMMAND REJECTED
If he issue the command from the console, the command is accepted.
PRT1 is an PSF Controlled, IP connected Infoprint 4000
We are running z/OS v2.1 and PSF v4.4
Does anyone have an
Hi all,
On Wednesday 4th May at 9-11am EST, IBM High Level Assembler (HLASM)
software engineer Richard Cebula will be doing an AMA (Ask Me Anything) on
Reddit's /r/mainframe. If you want to join the discussion, create a reddit
account and head to /r/mainframe in time for the AMA. There are
69 matches
Mail list logo