I can offer you a utility type program
It "reads" in a PDS/PDSE containing load modules/program objects and it uses
the DESERV and IEWBIND API"s to list all csects in the objects and what
compiler/product was used to build it.
This what your looking for? Shout if it is and I can mail you either
not supported by IBM.
In some cases the data returned by the log stream browse has to be manipulated
by SMF before the user sees it, such as if zEDC compression is turned on in
z/OS V2R1.
-Nick Jones
z/OS Development
From a logger perspective there is no clear answer, but there are a number of
tools to get off the data set.
Logger data sets are of the form HLQ.lsname.suffix and there are staging data
sets and offload data sets.
To get off of staging data sets you can change the duplex method for the log
the IPCS dialog 3.2
-Nick Jones
z/OS Service Aids/IPCS
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi Dan,
I just opened up APAR OA45131 to update BLSQMFLD. Were planning on adding a
LABEL attribute to the macro. This will allow NAME to specify length and
offset, while LABEL will be up to 8 characters displayed that are displayed.
-Nick Jones
nrjo...@us.ibm.com
z/OS Service Aids
Kurt,
Hope you were able to find someone to maintain your 3590-B11's and A50
controller. If you did, would you mind sharing who you made arrangements with
for continued HW support?
Earlier this year I upgraded my 3590-B11's and A50 controllers to 3590-E11's
and A60 controllers as I was aware
will just mean you'll need try again later.
3) Logger issues ENF signal 48 for log steam events. Listen to the ENF signal
for specific events as they might signal logstream activity. (Offload complete
is a good one to look at here)
-Nick
suggestions how I can remove it?
2. How can I determine why it is stuck on there, I can see nothing in the
logs that give me a clue as to whats happening
Tia
Nick
--
For IBM-MAIN subscribe / signoff / archive access
at this URL
http://www.listserv.uga.edu/archives/jes3-l.html
Lizette
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
On Behalf Of Icke, Nick
Sent: Wednesday, November 12, 2014 7:05 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Jes3 CI queue
Hi
data and log data sets.
The section on Deleting log data give you various options depending on what
application using the log streams.
Using tso to delete the log data sets can cause a lot of trouble for system
logger.
-Nick Jones, z/OS Development
This solution is assuming that Jake is on the z13 ESP and has part of OA43495
++APARs or PTFs applied.
If this is not the case then, please open a PMR and we'll investigate the
problem.
Nick Jones
z/OS Service Aids
On Wed, 11 Feb 2015 08:28:23 -0600, Nick Jones nrjo...@us.ibm.com wrote
This should be corrected by making sure your miglib has the updated IOSVFMTC in
it, or making sure you are on the latest ++APAR build.
--
Nick Jones
z/OS Service Aids
--
For IBM-MAIN subscribe / signoff / archive access instructions
My group is currently looking for an individual or organization that can
provide coding expertise for an HLASM coding project.
The project is to convert some HLASM programs that currently use XCF for
communications between LPARs to using TCP/IP for the same communications. All
other processing
My group is currently looking for an individual or organization that can
provide coding expertise for an HLASM coding project.
The project is to convert some HLASM programs that currently use XCF for
communications between LPARs to using TCP/IP for the same communications. All
other
Hi List
We are seeing behaviour under fault analyser where the ABTERMENC LE runtime
option is being forced to RETCODE instead of ABEND.
Can anyone confirm the behaviour?
TIA
Nick
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com
rom: "Icke, Nick" <nick.i...@hpe.com>
>Sent: Mar 12, 2016 9:52 PM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: CA7
>
>Hi
>
>Is there a listserv specifically dealing with Ca7
>
>Regards
>
>Nick
>
>
Hi
Is there a listserv specifically dealing with Ca7
Regards
Nick
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Whats the prob you are encountering and can you supply the exec pack, I maybe
able to help
Ta
Nick
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Hardee, Chuck
Sent: 03 January 2017 18:56
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: FDR
Take a look at white paper WP102314 at http://www.ibm.com/support/techdocs
This gives you various options of merging CTNs either disruptively or
non-disruptively, I successfully used the non-disruptive approach last year
having studied this paper very carefully.
Hi Gord,
Thanks for the heads-up on FAMS. Yes, I think this is going to hurt!
Nick
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
to get the FAMS licence.
Nick
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Many thanks, Cieri.
However, this method obtains the system wide maximum as defined by
MAXGENS_LIMIT in parmlib member IGDSMSxx, not the MAXGENS value defined to an
individual PDSE V2 library.
Nick
--
For IBM-MAIN subscribe
indicates whether that
PDSE is enabled for member generations. Unfortunately, it does not get the
maximum number of generations supported by the PDSE.
From what I've gathered from my Google searches, I'm beginning to suspect that
this information is only available via FAMS.
Nick
For authorized code, you can use the CALLRTM service. This can kill the current
task or any task you want. You could have a test program that abends a task in
your main program. It also has options to disable retry.
Nick Jones
in
SYS, that is, in this case, it reduces the list of exits from the ten in the
SYS specification to just the two that are explicitly listed?
Any pointers would be welcome!
Thanks,
Nick.
Nick Varley
Director, Customer Support
p +44 (0) 1823 226012 | m +44 (0) 7766 806780
nick.var...@syncsort.com
that in the SMF record description.
Is the SMF89UZT field meant to be an interval value? If so, please can you fix
the z/OS code so it is.
Any additional thoughts or comments are most welcome.
Best wishes
Nick
Nick Varley
Director, Customer Support
p +44 (0) 1823 226012 | m +44 (0) 7766 806780
There is a Microsoft Windows version of the z/OS OEM batch utility, SELCOPY.
SELCOPY for Microsoft Windows can be invoked as a line command in a Windows
shell or from a shell script (BAT or VBS). It is capable of record based data
manipulation (including ASCII<->EBCDIC) and also supports
it appears that the copyright and patent infringement claims that SAS brought
against WPS have been dismissed or withdrawn.
https://www.worldprogramming.com/press/sas_institute_ip_claims_against_world_programming_fail_again/
28 matches
Mail list logo
