Is there any way to export the 3D model of the board? I want to be able to
use it to design the enclosure and check for interference. I can’t seem to
find the option anywhere. Can someone help?
TIA - MarkW
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version:
2007/2/9, Mark Webster [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] solutions.co.uk:
Is there a key to swap between the active layer pair while routing? I
invariably start off on the wrong layer for surface mount components and I
find it distracting to move the cursor up to the layer menu.
Hi
Hi Glenn,
I'm not sure if this is doable with kiCAD, as you would have to generate two
different netlists to import into the two boards. However: I would strongly
suggest that you do this as two projects anyway. You don't want to have to
up issue both boards because you needed to make a change
I am brand-new to Kicad - just trying to learn to use it. Am I missing
something, or is there a way that when you move a part or block in pcb
or schematic, that the connections stay attached and just stretch from
their origins, or is the only choice to re-do all your connections
routed track
I'll begin a new design (3rd with Kicad) in some days, and I should ask
before drawing schematic: What could be the most efficient way to make a
single side PCB with 0R SMD bridges on tracks?
I read the Single layer PCB ... bridges on top layer thread, and it
seems, the SMD solution is not
Igor,
PCBNEW and most PCB packages always view the board from the component side.
If you place a component on the copper side then all the pins will appear
reversed because you are viewing it through the board. The pin numbers and
net connections will still be correct.
Yes, because it is
Hi Marcus,
You did nothing wrong, the DRC in PCBNEW doesn't detect zone connections. I
usually run thin tracks between the ground pins and DRC before filling the
zones just to make sure.
Regards,
MarkW
From: kicad-users@yahoogroups.com [mailto:[EMAIL PROTECTED] On
Behalf Of avr4you
Hello all,
I have one problem with the PCBNew or Gerber file viewer. The scale of
my printed PCB layer (on A4 with Scale 1) does not match with the PCB
dimension drawed in PCBNew.
Hi,
Printer scaling is never exact. If you need to do it this way (rather than
plot to a file to sent to a
Thanks for pointing that out. Let me know if you spot any other issues.
MarkW
From: kicad-users@yahoogroups.com [mailto:kicad-us...@yahoogroups.com] On
Behalf Of burnsrobbie
Sent: 06 April 2010 11:44
To: kicad-users@yahoogroups.com
Subject: [kicad-users] Very suspect links in the members
