Re: Spindle drive

Tim, Very nice. How did you get that very clean looking large hole in the steel plate? Did your brother do it for you? Where did you get the steel plate?   Cost? Cheers! Mac   -Original Message- From: Sent: Nov 28, 2021 10:51 PM To: LOM Group Subject: Re: Spindle drive   Here is what I

RE: Spindle drive

Ok sigh, I have to do everything lol https://www.youtube.com/watch?v=p2olosNXa80 =6s_channel=aussiman77181 Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 29 November 2021

RE: Spindle drive

Same motor just looks bigger because its back further. We have to go with what we can get There is nearly always a motor on ebay its just how much you want to pay its over for me know postage cost is impossible to me now. $70 postage for a $5 magazine finished it for me Bill From:

Re: 3d printed chuck jaws

Yup I am pretty sure it can be done now after looking at those parts yesterday for the Yesteryear tractor. Wow I better hit the hay its late. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28,

Re: New member introduction

Yeah I get it. I have some stashed for some playing but more for the chucks etc... I want for bone turning. I just watched a short video on the apprentice from Crafts Supplies USA Getting itchy there. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330

Re: New member introduction

You are absolutely right and yes baby steps and lots of planing ahead right? lol Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 10:45 PM wrote: > Baby steps Tim baby steps I think

RE: 3d printed chuck jaws

With the technology ever improving I bet there will be a material for the printer out there someday where we will be able to print the entire chuck Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 29 November 2021 3:29 PM To: LOM Group Subject:

Re: New member introduction

yup thanks Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 10:35 PM wrote: > I totally agree keep going Tim > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < >

Re: 3d printed chuck jaws

IM OUT!  ;-P C.A.G. On Sunday, November 28, 2021, 11:43:10 PM EST, wrote: Yea I wish I had one but I would never have a clue how to use it lol   Bill   From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 29 November 2021 3:24 PM To:

Re: New member introduction

You guys, Make me want to go back and build another Legacy toy.  I'm thinking something small this time. Something like the Legacy model 200, but with 1000ex / normal sized gears, and linear rail.  I've always liked the 200's floating Z axis. and I think the Y movement 1" on either side of 0,

RE: New member introduction

Baby steps Tim baby steps I think making mods is almost as much fun as using the mill itself lol Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 29 November 2021 3:27 PM To: LOM Group Subject: Re: New member introduction thanks Curt yes I

RE: 3d printed chuck jaws

Yea I wish I had one but I would never have a clue how to use it lol Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 29 November 2021 3:24 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: 3d printed chuck jaws Those look very nice! Please let us

RE: New member introduction

I totally agree keep going Tim Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 29 November 2021 3:16 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New member introduction I cant wait to see it when its done! looks Great!!! I still think you

Re: New member introduction

Yeah exactly what I want. I wish that wood chuck was not so far away I'd even settle for that. Curts giving me a couple idea's too using the Shopsmith size will see where it goes. Just know its going to happen sooner then later lol. I had to finally rob my drive off my 1500. I could not stand it

Re: Spindle drive

Great I best look a bit closer at that too. Did you attach the link or go to your youtube channel? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 10:24 PM wrote: > Yep Tim that’s

Re: Spindle drive

It looks fabulous I have to agree. Looks like you used a bigger motor now too? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 10:20 PM 'Curt George' via Legacy Ornamental Mills <

Re: 3d printed chuck jaws

Wow that is incredible. Yes the 3d is the new wave. I saw parts yesterday that were 3D printed of a 1918 tractor then they made castings from them . Its cool Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On

Re: New member introduction

thanks Curt yes I take all advice into consideration and keep moving forward. I'm getting super stoked to get more done then I have time for but. Its coming. Thanks again for the encouragement. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330

RE: New member introduction

Not before they sell a ball bearing one to me Tim lolol Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 29 November 2021 3:02 PM To: LOM Group Subject: Re: New member introduction Hey that looks pretty slick and is giving me idea's, but of

RE: Spindle drive

Yep Tim that’s where I got the idea I like it better than belts and by changing index gears I get many different speeds with a variable control. If you look at the leadscrew motor on my revo it literally is a woodchuck spindle motor modified to fit my revo. I have a video on it Bill

Re: 3d printed chuck jaws

Those look very nice! Please let  us know how they work. 3D printing is some Awesome stuff. C.A.G. On Sunday, November 28, 2021, 11:19:20 PM EST, bulke...@mmnet.com.au wrote: I had a friend of my son print these up for me to try strictly for very light holding for sanding or

Re: Spindle drive

Very Nice. Bill!I think yours looks better then Legacy's did. C.A.G. On Sunday, November 28, 2021, 11:09:24 PM EST, wrote: Welcome to the group jack https://www.youtube.com/watch?v=n80P9cLYkFs=292s_channel=aussiman77181 Bill -Original Message- From:

Re: New member introduction

I cant wait to see it when its done! looks Great!!!  I still think you should make your own head and tailstock For you Hybrid, Tim.Use a 5/8 shaft, then all your Shop Smith adaptors will fit it. The 5/8" shaft is smaller so ball bearings and everything will work with in the framework you

Re: Spindle drive

Thanks Bill yes we may have to talk more about that. I'm going to attempt to find material now to make the head and tail stock brackets. too. I'm going to have to post a bunch of pix now and get this more complete. I ran some tests on it tonight too. So I got to play a fair amount today. Kind

Re: New member introduction

Hey that looks pretty slick and is giving me idea's, but of course if someone would sell me a head stock and tail stock my search would be over and I could finish my HYBRID right Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798

RE: Spindle drive

Nice Tim a small note don’t forget to leave enough room for table nuts to be added or removed you never know when you might have to add them to the mill Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 29 November 2021 2:51 PM To: LOM Group

Re: New member introduction

Jeff don't feel alone I've only owned LOM's now 3 maybe 4 years. but found the group right out of the shutte. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 7:46 PM Jeff Richmond

Re: Spindle drive

Wow Bill you got that all painted up and working super great. Works on the principle of my WoodChucks spindle drive. Sorry my post earlier was just adding a acme thread drive. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop

Re: New member introduction

Nice! ;-) C.A.G. On Sunday, November 28, 2021, 10:52:14 PM EST, Tim Ziegler wrote: Not a lot of progress but at least I had it fired up lol Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Sun, Nov 28,

Re: New member introduction

Curts right I added a little over 2 foot of extra rail to runs some 8 foot plus on my 1200 worked great just needed more supports. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 7:19

Re: New member introduction

Hey Stranger great to here from you Mike. Speaking of the Wood Chuck I was playing on mine today. Yes as I looked there are some things about it I really like and now super glad I keep it. I found another only 10 miles from me but not sure if he's willing to part with it. Drive and all just like

Re: New member introduction

https://www.routerforums.com/forums/woodworking-classifieds.16/ Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 4:09 PM Jeff Richmond wrote: > Hi Tim, > > Thanks for the welcome. I

Re: New member introduction

Thanks Jeff, Yes I had to search for a rotary table too and found one on the Router Forum I belong too. However trying to get any response on there is like pulling teeth. Like Curt says "Crickets" I'd have to check the miles on that one. Wow. But I sent my kids all the way to Texas for my first

RE: New member introduction

I had forgotten I do like that one Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 29 November 2021 1:26 PM To: 'Curt George' via Legacy Ornamental Mills Subject: Re: New member introduction Just found Joe's tailstock. (Pretty Slick! ) C.A.G. On Sunday,

Re: New member introduction

Well thats certainly good to hear. Let er fly Jeff. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Nov 28, 2021 at 2:50 PM Jeff Richmond wrote: > Thanks for the links Curt, I will have to check

Re: Spindle drive

I’m looking into that too, Jack (I have a 900) Rick > On Nov 28, 2021, at 19:24, Jack Terry wrote: > > Saw your note recommending a spindle drive for the LoM. How do you add a > drive motor to the 1200. Before I moved I had a lathe with a 3 jar chuck. I > ordered a new hub from legacy and

Re: New member introduction

Thanks again Curt, yes that makes sense and is pretty creative use of a hole in the garage wall. Lol Even with my limited use, a live center is definitely an upgrade I see a need for on the Legacy. I will have to check compatibility with the shopsmith I have. I use that as a lathe from time to

RE: New member introduction

Also if you hold the work in a chuck and the other end in a steady rest you can do it all in just the mill . do half then end for end and do the second half Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 29 November 2021 12:19 PM To:

RE: Spindle drive

Welcome to the group jack https://www.youtube.com/watch?v=n80P9cLYkFs=292s_channel=aussiman77181 Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com On Behalf Of Jack Terry Sent: Monday, 29 November 2021 11:25 AM To: legacy-ornamental-mills@googlegroups.com

Re: New member introduction

Woops. I missed something. 4' cutting at a time. and then flipping the stock over to cut the other 4'. Is what I thought I wrote.   (hope this helps?) C.A.G. On Sunday, November 28, 2021, 08:19:14 PM EST, 'Curt George' via Legacy Ornamental Mills wrote: Hello again Jeff Your 900 can

Re: New member introduction

Hello again Jeff Your 900 can turn a 8' post if you only turn 4' at a time. It will take some slight modifications, like removing your tailstock on the legacy and using some time of object to hold the end of your stock. I small hole in the wall in my garage did it first, to hold my live

Re: New member introduction

Thanks for the background Mike and the warm welcome. I think I saw some snow coming down today. I have a goal of being able to do 8’ posts in the future (not on my stock 900) but a 15’ post must be a sight to behold and a real bear to move around. I am not familiar with the previous

Spindle drive

Saw your note recommending a spindle drive for the LoM. How do you add a drive motor to the 1200. Before I moved I had a lathe with a 3 jar chuck. I ordered a new hub from legacy and simply moved my work to the lathe with the hub for sanding and other details. A spindle drive motor wound be

Re: New member introduction

Welcome to the group Jeff.  I'm with you on the smell of burnt   I don't like it at all.  Air exchange as well as a good filtered mask is a must. The Wood Chuck in the picture has one very important mod that was made by the owner.  He took the 1 X 2 steel rail off the front and

Re: New member introduction

Hi Curt, My 900 is a manual model with the hand crank. It did pretty well for me on candlesticks and canes gifts back then but I am hoping to expand my project range. I haven't performed any modifications to the machine yet but may consider it. The links you provided will be very helpful. I

Re: New member introduction

Thanks for the offer Curt, I will reach out shortly. Jeff from Connecticut > On Nov 28, 2021, at 5:14 PM, 'Curt George' via Legacy Ornamental Mills > wrote: > >  > Hello Again Jeff > > If you want I have an extra turn table. > Send me a e-mail curt.geo...@yahoo.com > Perhaps we could

Re: New member introduction

Hello Again Jeff If you want I have an extra turn table.  Send me a e-mail    curt.geo...@yahoo.com Perhaps we could come to some agreements on getting you one? C.A.G.     On Sunday, November 28, 2021, 05:09:09 PM EST, Jeff Richmond wrote: Hi Tim,  Thanks for the welcome. I can relate

Re: New member introduction

Hi Tim, Thanks for the welcome. I can relate to adopting the whole tool but the challenge ever increases trying to find another corner in the garage to put them. I will have to dig up some photos. I believe Belchertown is in central Massachusetts which is about a 1 hour drive from me in

Re: New member introduction

Thanks for the links Curt, I will have to check those out. I have a 900 manual model which I purchased back in the early /mid 2000’s after seeing it demo at a woodworking show and used it for a few small projects / gifts. With the cost and it only being a hobby with a young family at the time,

Re: New member introduction

Hey Jeff, Welcome, Yeah good old Wood Chuck, a few of us actually have them. I may inquire for the drive. So yeah I'm one looking for parts all the time and everytime I purchase another machine its too good to take parts from so then my search continues. . I robbed my drive off my WoodChuck to

Re: New member introduction

Hello Jeff Welcome to the group. What modal Legacy do you own? Hopefully we will have a video collection of training videos for the group to watch. ( A project in the works. But sadly I have not idea when this will happen.) But at this time You tube has a number of them.  Mike Pung has a few

Re: Black Friday Weekend Woodshop Deals

Great I'm glad it was beneficial to you. I think it was a huge gain for WoodPecker to add turning wood and frequently have some good sales. WoodPecker rocks. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On

New member introduction

Hello Everyone, I recently joined this group in late October as a fellow owner of a Legacy Ornamental Mill with the hopes of learning more about this tool and its capabilities. Thanks in advance to everyone for sharing offering your experiences and helpful tips that a user group like this

Re: Black Friday Weekend Woodshop Deals

Thanks for the link Tim. I usually purchase my pen supplies from pennstate industries (https://www.pennstateind.com/?msclkid=81cdd1f3dc6f131c2001b0505c3aeccd_source=bing_medium=cpc_campaign=Penn%20State%20Industries%20Mispellings%20TEST_term=pennstateind_content=Penstateindustries) but these