/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
}
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute
Doug Asherman wrote:
To Whom It May Concern: :-)
I'm trying to set up a bar of music where an acciaccatura anticipates a
chord tone and is tied to that chord tone. The example is below. If I
use the \acciaccatura, the slur goes to the lowest chord tone, and I'd
like it to go to the chord
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED]
WWW
and in
individual parts.
Thanks
Zbynek
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors
Zbynk Burget wrote:
Hello,
I'm beginner with lilypond and I've some (may be) small problems. This is
one:
Can I have more parts in one .ly file? I need write a score for choir and
orchestra and parts for individual instruments. I've written all instruments
and voices and header information. If
Mark Van den Borre wrote:
Hi all,
Her I am again with my Debian PPC build errors, this time for LilyPond
2.1.27.
I included extensive information about my build environment, and useful
output from the package build itself. Hints on a solution highly
appreciated!
Mark
P.S. Please tell me if you
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors
Jan Nieuwenhuizen wrote:
Claudia Groiss writes:
I installed Lilypond yesterday for the first time and ran into an
error, for which I found no solution in the archives.
My system is Windows2000(SP4), the most recent Cygwin, teTex, etc. and
Lilypond 2.0.1 (MikTex is installed in a different
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
makes nothing
lilypond-book: \ in \markup makes
Is there a way around this?
-David
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Thomas Scharkowski wrote:
Hello,
I have two questions:
1. How do I avoid the following warning or what is the correct syntax
for no numbers instead of s?
It works, though.
--
warning: Junking event: `SkipEvent':
s4 64 28
--
2. How can I put the numbers above the staff?
The
My question now is what is the best way to create eps using dvips,
whenever I run dvips on the .dvi file I get the ugly output.
Please discribe some more details on what you try to do and what
problems you see. Also, say what LilyPond version you have and on
what platform.
Just a wild guess, have
if there was a similarly easy solution when using
lilypond-book on an html file...
On Mon, 1 Mar 2004, Mats Bengtsson wrote:
I hope you have seen the comment at
http://lilypond.org/doc/v2.0/Documentation/user/out-www/lilypond/Invoking-lilypond.html#Invoking%20lilypond
in connection to the --no-pdf
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790
list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
by running the following two commands
as root:
ln -s /usr/share/lilypond/$(VERSION)/fonts/type1
usr/share/texmf/fonts/type1/public/lilypond
texhash
(In the first command, replace $(VERSION) with 2.0.0 or whatever
you have on your machine.)
/Mats
Adam Tee wrote:
On 03/01/04 16:25:39, Mats
/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax
David Bobroff wrote:
It seems that for lyrics it is optional to escape the . It appears to
work either way. The problem with *not* escaping them is that the auto
indent gets confused for anything input after that point in the *.ly
file. Nor does auto-highlighting of enclosures i.e.: () [] {},
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
...
/Oddmund
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-use
r
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
}
}
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute
anymore.
As a more draconian measure we have decided to restrict email to
simple text/plain (or text/html). Emails that have mutipart/mixed are
rejected until further notice. Sorry for the inconvenience.
Greetings,
Jan.
--
=
Mats Bengtsson
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
-breaks shouldn't occur in
the middle of bars like this, or that a bar number should be printed at
the start of the first full bar.
I'm using 2.1.28.
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal
://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
\resetBarsB
I was hoping that someone here would be able to think of a better way.
Thanks for any responses to these questions!
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute
David Raleigh Arnold wrote:
When numbering measures at the beginning of a line, if there be a line
break in the middle of the measure, the number should be that of the
*following* measure, not the current measure which is broken. I should
have pointed that out.
That's because it is not possible
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED
David Raleigh Arnold wrote:
On Friday 12 March 2004 01:48, Edward Sanford Sutton, III wrote:
On Wednesday March 10 2004 12:23, David Raleigh Arnold wrote:
On Saturday 06 March 2004 02:53, Edward Sanford Sutton, III wrote:
Is there a preferred way to have two different dynamics in a
section
://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
, that solve this problem?
Thanks
Zbynek
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal
/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Well, I haven't seen a single mail on the list that has not been
delayed by at least 2 days, I hope you have not had to review
everyone of them.
/Mats
David R. Linn wrote:
We (the project leaders and I) have made a number of changes to the Lilypond
mailing list configurations over the last few
The only real inconvenience is the inability to send .pngs, since .ly
files can simply be the text or part of it.
For those who don't have a website, Would it be possible to provide a
separate subdirectory somewhere so .pngs could be sent separately and
posters could provide either a citation to
{}
}
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone
David Bobroff wrote:
Thanks for the \grace {skip} suggestion. I haven't tried it yet.
Somewhat related to this thread:
I want to use the slash style grace without a slur. I discovered in
the acciaccatura definition that this is done with some bit of scheme
which I don't remember at the
The mailing list has been extremely slow during the last weeks
due to the enormous amounts of virus emails swirling around.
When you send questions to the list, please always tell what
LilyPond version you use (and on what kind of system if you
have any question related to the installation).
Lyle
mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
chords) in the MIDI output of a piece?
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email
)
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44
Mostly, I deal with marching percussion, but the same sort of stuff applies
to all percussion really. The main thing is the slashes through the notes,
and the grace notes without slurs.
A single grace notes without a slur but with a slash is trivial to
obtain, see
Edward Sanford Sutton, III wrote:
On Tuesday March 16 2004 10:45, Mats Bengtsson wrote:
A single grace notes without a slur but with a slash is trivial to
obtain, see
http://mail.gnu.org/archive/html/lilypond-user/2004-02/msg00122.html
Is there a doc somewhere that would have told me
-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Han-Wen Nienhuys wrote:
[EMAIL PROTECTED] writes:
I guess the problem appears if you want another slur to end at the
main note after the appoggiatura/acciaccatura.
I was actually surprised myself to notice that slurs indeed can be
nested in LilyPond of neither the start nor the end point
On the topic of ambiguities, es and ees both are e-flat; I haven't seen it
documented or used so I avoid it myself. it it normal, correct, and
acceptable for proper style?
It's probably just included for completeness. For people who don't
speak dutch, it's easier to discribe the general
This is actually documented in the notation maunual:
http://lilypond.org/doc/v2.0/Documentation/user/out-www/lilypond/Pitches.html#Pitches
/Mats
Edward Sanford Sutton, III wrote:
On Wednesday March 17 2004 10:48, Mats Bengtsson wrote:
On the topic of ambiguities, es and ees both are e-flat; I
But does a nested slur always work? I am on 2.1.30.hwn1 and with a code
snippet from my nocturne piece I'm typesetting
g8\( |
f4.\trill^\markup { \finger 13 } \acciaccatura { e16-2[ f] } g8\)
if you turn the phrasing slur into a normal slur, it errors at the first g8 's
slur saying that it
if this is a really stupid answer. daveA
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute
/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
.
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44
.
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED]
WWW: http
?
Zbynek
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
As you can find in the manual (section Invoking lilypond), the
only possible values for this field are no or a positive number.
This is why your file fails. Just leave out that field if you want
normal page numbering.
/Mats
Lyle Raymond wrote:
On Wednesday 24 March 2004 9:36 am, Mats Bengtsson
.
Thanks.
Bostjan
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
-files.html#new-markup-syntax.ly
which illustrates both how to typeset dynamics with \markup and how to
stack several lines of markup text. Don't forget to browse through the
Tips and Tricks document once in a while also.
/Mats
Lyle Raymond wrote:
On Wednesday 24 March 2004 9:36 am, Mats Bengtsson
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED
.:::.
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44
LaTeX document, you should
definitely take a look at the program lilypond-book, which lets
you include music scores within a LaTeX document, either with
inline LilyPond code or by refering to a separate file.
/Mats
Mats Bengtsson wrote:
LilyPond is one of these programs where you unfortunately
}
(I'm running v. 2.1.0 in Mandrake 9.2)
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals
, respectively, except that they are
offset horizontally in case of collisions.
/Mats
Mats Bengtsson wrote:
One solution (which might be right or wrong depending on what voices
the different tones belong to, musically) is to let the two half notes
be typeset as a chord:
{\stemUp fis8([ g-0]) e
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED]
WWW
be hard to add this option also
to lilypond-book.
/Mats
Ernesto Trajano de Lima wrote:
On Mar 25, 2004, at 7:28 AM, Mats Bengtsson wrote:
Reading your question again, I realize that I was maybe too
patronizing in my answer. If you process the file with lilypond-bin
without any extra flags, you
://fr.messenger.yahoo.com
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal
, but I'm
trying to be faithful to the original.
Then, just follow my first suggestion in the previous answer:
''text of song``
/Mats
Again, suggestions are welcome.
Stan
On Mar 26, 2004, at 4:04 AM, Mats Bengtsson wrote:
The LaTeX syntax for a double quote is ''quoted text``, at least
/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Have you tried
``this syntax''
yet? This is the right way to do it in LaTeX and works well
in LilyPond as well.
Stan Sanderson wrote:
On Mar 26, 2004, at 9:25 AM, Mats Bengtsson wrote:
...
What did you read that made you think that? Underscores in lyrics
are simply replaced by spaces, nothing
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790
I hope you have seen the instructions at
http://lilypond.org/web/download/windows.html.
To convert a .ly file to .pdf, just double-click on it.
/Mats
Juhani Valtasalmi wrote:
Hi!
I'm having trouble generating from LY to PDF. I downloaded stable version 2.0.1 with Cygwin's setup.exe (I use
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED
/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
fine
with the setting of interscorelinefill in the paper block.
Best Regards Roland
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats
spamguy21
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal
Bostjan Kuzman wrote:
Thanks, this will come handy. However, this conversion doesn't replace
11pt option with staffwidth=11.
If I keep 11pt in the code, I get several warnings from lilypond-book
and on running latex I get this:
LaTeX error: missing \begin{document}
l.1 ^^ef
Sorry, too quick with the send button!
Mats Bengtsson wrote:
I know some people use
\header{
...
piece = Vivace
}
Otherwise, you could take a look at
http://mail.gnu.org/archive/html/lilypond-user/2004-02/msg00098.html
/Mats
Bertalan Fodor wrote:
What is the preferred method to put meter
chip wrote:
Mats Bengtsson wrote:
This is actually described in the manual, see
http://lilypond.org/doc/v2.0/Documentation/user/out-www/lilypond/Multi-measure-rests.html
You may want to use the \center or \column text markup commands to
print the number on its own line above or below
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
You can certainly have a \header block within a \score.
Possibly, you have managed to place a \notes declaration
that includes the \header block.
Take a look at
http://lilypond.org/doc/v2.2/input/test/out-www/collated-files.html#title.ly
for a working example (even though the titles don't show in
Yann Davin wrote:
Hello,
i am a new user, and i have two questions :)
1. I would like to know if there is a way
to do a function like get-object (x y) returns
lilypond object at (x,y) position.
??? Why would you want to do that? What kind of coordinate system
do you have in mind? The absolute
I recommend to take a look at the point and click feature of xdvi:
http://lilypond.org/doc/v2.2/Documentation/user/out-www/lilypond/Point-and-click.html
/Mats
Yann Davin wrote:
--- Mats Bengtsson [EMAIL PROTECTED] a écrit
:
Yann Davin wrote:
Hello,
i am a new user, and i have two
Bug/limitation in lilypond reported below!
Thomas Scharkowski wrote:
Thank you.
I want to use the \changefont command for titling.
latexheaders = newcommand.tex
in the *.ly file does produce
\include{newcommand.tex}
in the resulting *.latex file, right?
Certainly! If you want to find out
PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790
.
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal
Please always state what Linux distribution you use and what
package you used to install LilyPond, when sending questions.
From the error message, it seems that you would need a newer
version of Guile. However, you have installed a very old
version of LilyPond, I definitely recommend to install
Ferenc Wagner wrote:
Ruven Gottlieb [EMAIL PROTECTED] writes:
I see there is a file called titledefs.tex in
/usr/share/lilypond/2.2.0/tex/
I don't want to hack on that if I can help it, rather I'd
like to be able to have lilypond use one I specify, or the
equivalent Right Thing.
The
/listinfo/lilypond-user
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
--
=
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
701 - 800 of 4913 matches
Mail list logo