Is the triplet OSA set 0048-04A attached to TCPIP
Issue a QUERY OSA and if you are setup correctly you should see all three OSA
devices connected to TCPIP
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Melancon,
I am trying to install Linux on z and RHEL 6.3 Test mode installation assumes a
lot.
I want to allocate specific /dev/dasdx to specific mount points
/dev/dasda to /boot
/dev/dasdb to /
/dev/dasdc to swap
Is there a way to do this I can't seem to get X Windows working or VNC.
Larry Davis,
VM
, did you use the ssh -x install@IP
(-x) ?
-
Filipe Miranda
On Feb 19, 2013, at 12:45 PM, Davis, Larry (National VM Capability)
larry.dav...@hp.commailto:larry.dav...@hp.com wrote:
I am trying to install Linux on z and RHEL 6.3 Test mode installation assumes
a lot.
I want to allocate
: Davis, Larry (National VM Capability)
Subject: Re: RHEL 6.3 DASD configuration
On 21.02.2013 15:57, Davis, Larry (National VM Capability) wrote:
I finally got the Graphical installer working using X but now when I try to
Install Linux on my DASD I end up with DASD accessed R/O when
I have a SUSE 11 system that when I Log on from a 3270 session I get thrown in
to a LOG like if I was logging into a Running CMS user.
I have my CONSOLE SPOOL'd to my Linux ID and have Operator as my SECUSER in the
Directory on the CONSOLE statement.
This did not do this on z/VM 5.4 but it does
When pulling files using the GET command in FTP from LINUX to VM, the CR/LF is
lost and the files end up as one huge line in CMS.
Is there a function on the Linux side I need to change to prevent this or is it
an entry in the FTP client on VM?
Larry Davis,
HP Enterprise Services
E-mail:
Change the Virtual addresses to 300 and 301 and IPL and see if all works
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Paolo
Cacciari
Sent: Tuesday, May 21, 2013 4:50 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re:
If you are not familiar with Linux and good with zVM then look at the SUSE SLES
10 SP2 Starter system it is self-contained and self-configurable when you move
it between networks. Also it is fairly easy to add an LVM and mount newer
versions of SLES or RedHat ISO images for building new Linux
What would cause the UNPK files to be 100 years in the past the Century is 19
rather than 20?
This is from a CT time zone system
SWAP1308 VMARCA1 F 80 3602 71 2013-08-26 12:21:36
SWAPGEN PDFBIN A1 V 8192 20 39 1913-08-22 16:16:35
SWAP1308
David it may have been both of us, I downloaded the latest VMARC from IBM and
it is a few bytes difference, but the files were still a century off.
Filename Filetype Fm Format Lrecl
VMARCMODULE B1 V 13464
VMARCMODULE R1 V 13456
The new VMARC file you created works great
Try sending the Password on a separate line with the PASS command
user $USER
pass $PASS
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Bauer,
Bobby (NIH/CIT) [E]
Sent: Friday, August 30, 2013 12:30 PM
To:
Shouldn't it be CST Now and if Operations adjusted the clock at IPL time then
VM is correct by Operator intervention.
When you installed Linux did you tell it to use GMT and apply its own offset or
use the Local time?
One answer I believe uses the hardware clock and the other uses the VMDBK
I believe you need X Windows at a minimum installed and Gnome for a desktop
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of van
Sleeuwen, Berry
Sent: Monday, November 11, 2013 6:46 AM
To: LINUX-390@VM.MARIST.EDU
HLASM for Linux on an IFL has a separate Feature code for the OTC and the SS
IBM High Level Assembler for Linux on System z intending to execute High Level
Assembler on IFL processors should order PRPQs 5799-TCQ and 5799-TCR for each
IFL.
5799-TCQ (OTC)and
5799-TCR (SS)
Larry
Then just order the VM HLASM and that should give you access to the Linux RPM.
Later you will have to convert the CP HLASM license to an PRPQ per IFL License
if IBM is nice they should convert it straight over.
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port
Do your IMG files look like this
Filename Filetype Fm Format LreclRecords Blocks
INITRD IMG I1 F 80 234521 4581
KERNEL IMG I1 F 80 113594 1752
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port
Has anyone else had an issue installing the SLES 11 Starter system and the NIC
device not being recognized
Once the system is up the NIC Devices are visible but need to be configured to
make them active but won't connect to ETH0
Anyone else experience this or have a suggestions to fix this.
, 2014 4:28 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES 11 Starter System NIC problem
On 11/14/2014 at 04:22 PM, Davis, Larry (National VM Capability)
larry.dav...@hp.commailto:larry.dav...@hp.com wrote:
Has anyone else had an issue installing the SLES 11 Starter system and
the NIC device
Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Mark Post
Sent: Friday, November 14, 2014 6:20 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES 11 Starter System NIC problem
On 11/14/2014 at 04:39 PM, Davis, Larry (National VM
Subject: Re: SLES 11 Starter System NIC problem
On 11/14/2014 at 04:39 PM, Davis, Larry (National VM Capability)
larry.dav...@hp.com wrote:
-snip-
novstart:/sys/bus/ccwgroup/drivers/qeth # dir dir total 0
--w--- 1 root root 4096 Nov 14 19:54 bind
--w--- 1 root root 4096 Nov 14 19:54 group
You can't have NICDEF's using a VSWITCH with TCPIP and ATTACH: statements in
the DTCPARMS file
NICDEFS are used to connect a virtual device to the user and couple it to the
VSWITCH. The VSWITCH is the only one that touches the Real devices not TCPIP in
this case.
ATTACH: is used when you want
What version of SLES are you using
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Michael
Weiner
Sent: Tuesday, March 10, 2015 8:58 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Dasd question
Hi everyone. First time posting
Look at the device drivers book for SLES on IBM's Development Works site.
There are /s390 tools that should be installed and I believe you can use
Lsqeth
Znetconf
These utilities should help
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390
Sent: Tuesday, November 10, 2015 9:53 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES12 - yast does not create a udev rule
>>> On 11/10/2015 at 08:08 AM, "Davis, Larry (National VM Capability)"
<larry.dav...@hpe.com> wrote:
> I have the same problem with Network and D
I have the same problem with Network and DASD devices that I add, I am not sure
of the proper procedure but I had to add the network device to the Rules files
in
/etc/udev/rules.d/70-persistent-net.rules
I have also had to add rules for each new DASD device so it is available after
an
Is this a dedicated OSA to Linux or through a VSWITCH running on z/VM?
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Victor
Echavarry Diaz
Sent: Wednesday, August 26, 2015 1:35 PM
To: LINUX-390@VM.MARIST.EDU
, 2015 at 9:44 AM, Rich Smrcina <r...@velocitysoftware.com>
wrote:
> COMMAND DEFINE VFB-512 0202 128000
> COMMAND DEFINE VFB-512 0203 256000
>
>
> On 09/04/2015 11:35 AM, Davis, Larry (National VM Capability) wrote:
>
>> How are people using a CMS PROFILE EXEC and SW
of Surrender is signed on board USS
Missouri in Tokyo Bay. President Truman proclaims this as the official V-J Day.
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@vm.marist.edu] On Behalf Of Davis,
Larry (National VM Capability)
Sent: Friday, September 04, 2015 10:44
To: LINUX
in the directory
rather then having a PROFILE EXEC create it.
Scott Rohling
On Fri, Sep 4, 2015 at 10:34 AM, Davis, Larry (National VM Capability) <
larry.dav...@hpe.com> wrote:
> Thank you
> I am thinking I can either QUEUE up the DETACH statements like Marcy
> suggested or add th
To: LINUX-390@vm.marist.edu
Subject: Re: SSI LGR using CMS PROFILE with SWAPGEN and VDISK
Our exec does
queue "CP DET 190"
queue "CP DET 19E"
queue "CP IPL 101 CLEAR"
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Davis,
The * is being improperly translated try using the VM USERID where you are
executing the vmcp command from
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Michael
Weiner
Sent: Friday, December 04, 2015 3:50 PM
To:
CA has been looking for people to give them the API's they are looking for, but
IBM is not sharing all there interfaces either
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Dave Jones
Sent: Tuesday, March 22, 2016
We are using btrfs and it just requires some changes to adding DASD and
expanding file systems.
I would look at your backup mechanism and make sure it is compatible before you
commit to it.
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Davis,
Larry (National VM Capability)
Sent: Tuesday, August 16, 2016 8:59 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES 12 - to btrfs or not to btrfs
We are using btrfs and it just requires some changes
We run it on a group of Red Hat systems, I believe, the Linux Admins use it to
maintain our Red Hat Linux system running on z/VM.
We have not tried it with any SLES systems
Larry Davis,
VM Capability
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On
I would push the vendor and you may get farther than me that they need to
support SLES 12 on s390x like they do on SLES 11, and if they complain that
they don't have a test system then give them my email address as a POC
Larry Davis
VM Capability
Tel: +1 813 394 4240 Office
E-mail:
It looks like there currently is not an RPM file for a s390x architecture for
RHEL 7
Has anyone ever built OOREXX on a s390x system from source or can anyone
recommend documentation for doing this?
TIA
Larry Davis
DXC Technology, National Mainframe z/VM team
T +1.813.394.4240
/OSS/7/s390x/ooRexx-4.2.0-9940.cl7.s390x.rpm
It should be added to our EPEL7 library shortly as well.
Neale
On 10/3/17, 12:10 PM, "Linux on 390 Port on behalf of Davis, Larry (National VM
Capability)" <LINUX-390@VM.MARIST.EDU on behalf of larry.dav...@dxc.com> wrote:
newer release is in
> this separate repo as it required a higher level of rpm to build
> (along with co-reqs). This repo also contains a heap of python2/python3
> packages.
>
> On 10/3/17, 4:43 PM, "Linux on 390 Port on behalf of Davis, Larry
> (National VM Capab
I am searching for p7zip for processing large files on RHEL 7 and I can find
the RPM files for Fedora "p7zip-16.02-6.fc28.s390x.rpm" can I download this rpm
and use it on a RHEL 7.3 system
Larry Davis
DXC Technology, National Mainframe z/VM team
T +1.813.394.4240
Thank You this is great help
Larry Davis
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of R P
Herrold
Sent: Thursday, November 02, 2017 14:41
To: LINUX-390@VM.MARIST.EDU
Subject: Re: P7zip for RHEL 7 s390x
responding to myself:
On Thu, 2 Nov
For that process to work you will have to load a new Standalone program Loader
using the new Device address for the PDR volume on the PDVOL =
Here is an example of an exec to load the IPL SALIPL file from the MAINT 190
"S" disk
MKSAIPL EXEC:
/* rexx exec */
true = (1=1)
false = \true
Q IPLPARMS should display what was set in the IPL SALIPL when it was loaded to
the RESVOL
When you move the VM Volumes as long as the VOLSER's don't change there should
be no issues unless you are setting the new devices OFFLINE AT IPL time in
Your SYSTEM CONFIG file.
For the most part Spool
When I try to boot RHEL 7 on a z/VM system I end up with an error
Starting Dracut Emergency Shell...
Warning: /dev/root does not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want
What's in your prm file?
Original message
From: "Davis, Larry (National VM Capability)"
Date: 7/6/18 09:39 (GMT+10:00)
To: LINUX-390@VM.MARIST.EDU
Subject: [LINUX-390] RHEL will not boot on s390x
When I try to boot RHEL 7 on a z/VM system I end up with an error
Subject: Re: RHEL will not boot on s390x
Are you able to use the same ftp URL from a browser and get that .img file?
On 7/6/18, 20:47, "Linux on 390 Port on behalf of Davis, Larry (National VM
Capability)" wrote:
Ý 15.806090¨ dracut-initqueueÝ839¨: curl: (9) Server denied you
Not sure if it is in RHEL 6.0, but look at /etc/dasd.conf file putting your
device address' in this file we allow them to be online and available at IPL
time
Larry Davis
-Original Message-
From: Linux on 390 Port On Behalf Of Roberto Ibarra
Magdaleno
Sent: Thursday, August 15, 2019
Also make sure that you add the address "0.0.0200" to the /etc/dasd.conf file
Larry Davis (z/VM Team)
-Original Message-
From: Linux on 390 Port On Behalf Of Cohen, Sam
Sent: Wednesday, April 15, 2020 12:06 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Adding disk to root LVM with RHEL 7
Really need a way to link SSI member VM systems over something other than CTCA
only connections.
Allowing Remote VM systems like DR sites to participate in a SSI complex
Wishful thinking?
Larry Davis (z/VM Team)
-Original Message-
From: Linux on 390 Port On Behalf Of Alan Altmark
On Behalf Of Mark Post
Sent: Friday, June 26, 2020 11:56 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Moving Root to Larger disk
On 6/26/20 9:54 AM, Davis, Larry (National VM Capability) wrote:
> I am trying to move a Linux root (/) file system to a larger disk
> format
I'm not sure what yo
I am trying to move a Linux root (/) file system to a larger disk format
I was able to block copy the data from one device to the other using the DD
command below
dd if=/dev/dasdb1 of=/dev/dasdd1 bs=64K conv=noerror,sync
But I need to make the new Device Bootable and normally I
I have a Linux admin that wants a Linux Terminal to reboot the Linux server and
view the reboot, but when they login through Putty using Line mode Telnet to VM
and login to the Linux server they are not able to send any commands or type
anything on the screen
Am I missing anything in the PUTTY
I found this statement in the Linux-390 archives from Rick Troth and was
wondering if any one has used this interface or if there are more details on
using it
*Linux sees an ASCII "system console"*
This is where I had to do a little digging. They don't let me on the HMC
so I have never gotten
We are looking at using Containers to simplify our Linux upgrades and
Application deployments
What do Users recommend for a RHEL environment on zSeries
OpenShift
Kerbenetes
Podman
Are there any Redbooks or good guides on setting up a container or Openshift
type environments?
Larry Davis
That is what, I thought the SYSASCII device was designed for?
Larry Davis (z/VM Team)
-Original Message-
From: Linux on 390 Port On Behalf Of Paul Gilmartin
Sent: Tuesday, March 2, 2021 12:06 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SYSASCII Console for Linux images
Yes and it works great as long as the user does not do a reboot or the systems
fails to boot or load the IUCV driver
Larry Davis (z/VM Team)
-Original Message-
From: Dave Jones
Sent: Monday, March 1, 2021 3:50 PM
To: Linux on 390 Port
Cc: Davis, Larry (National VM Capability
What are people doing when the local Linux people are wanting ASCII Consoles
available for performing reboots or problem resolution
I know I can attach the SYSASCII (HMC ASCII vt220 console) to a Linux image
Does the Linux image need to include "ttys1" in the /etc/zipl.conf file for
RHEL 7.5
We are seeing an Issue when Using Hipersockets connected to a DB2 system on z/OS
When we perform a VMRELOCATE (LGR) to another member in the complex we lose the
HS device and it goes offline
The Relocate works fine the HS devices have the same EQID and we see the
devices attached on the
Thanks we are testing again soon, just looking for others that may have tried
and had similar issues
Larry Davis (z/VM Team)
-Original Message-
From: Linux on 390 Port On Behalf Of Bill Bitner
Sent: Tuesday, April 20, 2021 12:49 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Question
Cross posting to Linux for s390 and z/VM List Serves
We are looking at using a SAN and connect our z/VM system to it to allow our
Linux servers on z/VM to use it
We are having questions on Connectivity in the IOCP to backend LUN's in the SAN
For FCP Channels you are not allowed to do
icktime.symantec.com/3Ra5CNjXqdX5owcopq55Vp7VN?u=https%3A%2F%2Fwww.vm.ibm.com%2Feducation%2Flvc%2FLVC0924.pdf%3Fcm_sp%3Ddw-dwtv-_-linuxonz-_-PDF-for-3rdpartyhost-videos%2520PDFs
On Mon, Feb 7, 2022 at 5:37 PM Davis, Larry (National VM Capability) <
larry.dav...@dxc.com> wrote:
> Cross posting to Linux
61 matches
Mail list logo
