On Sun, Jun 21, 2009 at 11:44 PM, Laszlo Kustanlkus...@gmail.com wrote:
Hi everyone,
I have a Kword DVB-T 323UR connected to a Linux Mint 7 Gloria (based
on Ubuntu Jaunty), kernel 2.6.28.
I successfully compiled em28xx, the firmware was obtained based on these
steps:
1) Download the windows
Hi Markus,
Sorry, it seems that sometimes my usb is not recognized as 2.0, I
wonder why this happens.
Anyway, I'll send you in the afternoon a correct dmesg output, but the
results are the same: same problems with analog routing and no remote.
After I installed your tvtime version (had to install
Hi,
On 06/22/2009 04:29 AM, Mauro Carvalho Chehab wrote:
snip
luvcview is a somewhat limited app, which only works with uvc cams, even libv4l
cannot
help it, as it requests uvc specific formats to which libv4l cannot convert.
What application works better with libv4l? Btw, it would be nice
Kevin,
I think this patch has to be taken into DaVinci tree so that it
can be submitted upstream. This patch has to be present in the Linux
tree for Hans to prepare a pull request for DM646x display driver
patches.
Regards,
Chaithrika
-Original Message-
From:
Using dtv1000s tree revision 21a03349f7f9 and a blank modprobe.conf
I can tune to channels but never all of them in the single run of w_scan.
Every time I run w_scan it's different channels that say 'filter timeout'.
Thanks
dmesg:
[8.616658] Linux video capture interface: v2.00
[
Platform specific display device setup for DM646x EVM
Add platform device and resource structures. Also define a platform specific
clock setup function that can be accessed by the driver to configure the clock
and CPLD.
This patch is dependent on a patch submitted earlier, which adds
Pin Mux and
Platform specific display device setup for DM646x EVM
Add platform device and resource structures. Also define a platform specific
clock setup function that can be accessed by the driver to configure the clock
and CPLD.
This patch is dependent on a patch submitted earlier, which adds
Pin Mux and
mutex_lock_interruptible return value has to be handled properly to indicate
the status to the higher layers of the kernel.
Signed-off-by: Chaithrika U S chaithr...@ti.com
---
Applies to v4l-dvb-dm646x repo maintained by Hans Verkuil
at http://linuxtv.org/hg/~hverkuil/v4l-dvb-dm646x/
On Sun, 2009-06-21 at 22:39 -0500, Theodore Kilgore wrote:
Andy,
You are right. Your camera is emitting JPEG while streaming. I just
succeeded in creating an image which resembles your test picture by
extracting the frame data for one frame, tacking on a header, and running
hex2bin on
input, inp and i are unsigned. When negative they are wrapped and caught by the
other test.
Signed-off-by: Roel Kluin roel.kl...@gmail.com
---
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c
b/drivers/media/dvb/ttpci/av7110_v4l.c
index ce64c62..8986d96 100644
---
On Saturday 20 June 2009 12:05:13 ext Dongsoo, Nathaniel Kim wrote:
Following patch.
http://www.gitorious.org/omap3camera/mainline/commit/d92c96406296310a977b00f45b209523929b15b5
What happens to the capability when the int device is dummy? (does it
mean that there is no int device?)
Yes, when
-Original Message-
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Tuukka.O Toivonen
Sent: Monday, June 22, 2009 8:52 AM
To: ext Dongsoo, Nathaniel Kim
Cc: Sakari Ailus; linux-media@vger.kernel.org; Aguirre Rodriguez, Sergio
Alberto;
2009. 06. 22, 오후 10:52, Tuukka.O Toivonen 작성:
On Saturday 20 June 2009 12:05:13 ext Dongsoo, Nathaniel Kim wrote:
Following patch.
http://www.gitorious.org/omap3camera/mainline/commit/d92c96406296310a977b00f45b209523929b15b5
What happens to the capability when the int device is dummy? (does
2009. 06. 22, 오후 11:01, Aguirre Rodriguez, Sergio Alberto 작성:
-Original Message-
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Tuukka.O Toivonen
Sent: Monday, June 22, 2009 8:52 AM
To: ext Dongsoo, Nathaniel Kim
Cc: Sakari Ailus;
Hans,
Thanks for taking care of this.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
email: m-kariche...@ti.com
-Original Message-
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Sent: Friday, June 19, 2009 8:41 AM
To: Alexey Klimov
Cc: Karicheri,
snip
+static int dm355_ccdc_init(void)
+{
+ printk(KERN_NOTICE dm355_ccdc_init\n);
+ if (vpfe_register_ccdc_device(ccdc_hw_dev) 0)
+ return -1;
Don't you want to rewrite this to return good error code?
int ret;
printk();
ret =
-Original Message-
From: Dongsoo Kim [mailto:dongsoo@gmail.com]
Sent: Monday, June 22, 2009 9:05 AM
To: Aguirre Rodriguez, Sergio Alberto
Cc: Tuukka.O Toivonen; Sakari Ailus; linux-media@vger.kernel.org;
Hiremath, Vaibhav; Koskipaa Antti (Nokia-D/Helsinki); Cohen David.A
Hi list!
This patch fixes some checkpatch warnings in mt312-driver.
Signed-off-by: Matthias Schwarzott z...@gentoo.org
Regards
Matthias
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===
---
Hi list!
It seems the path to lsmod tool is hardcoded in the Makefile for out-of-tree
building of v4l-dvb.
Now at least gentoo has moved lsmod from /sbin to /bin.
Additionally it is bad style (or at least I am told so), to not rely on $PATH
but hardcode pathes for tools that should be in $PATH.
-Original Message-
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Aguirre Rodriguez, Sergio Alberto
Sent: Monday, June 22, 2009 5:22 PM
Thank you Sergio. So you mean that I can buy OMAP Zoom target board
with MT or OV sensor on it
On Mon, 22 Jun 2009, Andy Walls wrote:
On Sun, 2009-06-21 at 22:39 -0500, Theodore Kilgore wrote:
Andy,
You are right. Your camera is emitting JPEG while streaming. I just
succeeded in creating an image which resembles your test picture by
extracting the frame data for one frame, tacking on
This patch adds files which creates the radio interface
for si4713 FM transmitter (modulator) devices.
In order to do the real access to device registers, this
driver uses the v4l2 subdev interface exported by si4713 i2c driver.
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
Simple add Makefile and Kconfig entries.
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
linux/drivers/media/radio/Kconfig | 22 ++
linux/drivers/media/radio/Makefile |2 ++
2 files changed, 24 insertions(+), 0 deletions(-)
diff --git
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
linux/include/media/v4l2-subdev.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/linux/include/media/v4l2-subdev.h
b/linux/include/media/v4l2-subdev.h
index 5dcb367..4dc3788 100644
---
This single patch adds documentation description for FM Modulator (FM_TX)
Extended Control Class and its Control IDs. The text was added under
Extended Controls section.
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
v4l2-spec/Makefile |1 +
v4l2-spec/controls.sgml |
Hello all,
First of all, I'd like to thank you for the good review. The driver
is getting better and better. With this new API change, si4713 is looking
like a fm transmitter driver.
So, I'm resending the FM transmitter driver and the proposed changes in
v4l2 api files in order to cover the
This patch adds simple support for FM TX extended controls
on v4l2-ctl utility.
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
v4l2-apps/util/v4l2-ctl.cpp | 36
1 files changed, 36 insertions(+), 0 deletions(-)
diff --git
This patch adds a new class of extended controls. This class
is intended to support FM Radio Modulators properties such as:
rds, audio limiters, audio compression, pilot tone generation,
tuning power levels and preemphasis properties.
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
This patch adds a document file for si4713 device driver.
It describes the driver interfaces and organization.
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
linux/Documentation/video4linux/si4713.txt | 175
1 files changed, 175 insertions(+), 0
Signed-off-by: Eduardo Valentin eduardo.valen...@nokia.com
---
linux/drivers/media/video/v4l2-common.c | 48 +++
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git a/linux/drivers/media/video/v4l2-common.c
b/linux/drivers/media/video/v4l2-common.c
index
I have upgraded my dvb-t card to a leadtek pxdvr3200 but unfortunatly
scan always fails
i use a 2.6.30 amd64 kernel
with kaffeine 0.8.7 (when tuned: signal 56% snr 88%)
Using DVB device 0:0 Zarlink ZL10353 DVB-T
tuning DVB-T to 58600 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
Hi,
Snip
-/**
+/*
* struct tvp514x_decoder - TVP5146/47 decoder object
- * @v4l2_int_device: Slave handle
- * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device
+ * @sd: Subdevice Slave handle
* @tvp514x_regs: copy of hw's regs with preset values.
* @pdata:
Hi again,
Here is the correct dmesg output when my usb port is recognized
properly The output is kind of weird, because this tuner does not have
radio but according to dmesg it is switching the device to FM mode...
[ 550.908041] usb 1-4: new high speed USB device using ehci_hcd and address 6
[
On Sat, 20 Jun 2009 22:19:30 +0200, Jens Krehbiel-Gräther
jens.krehbiel-graet...@jkg-it-services.de wrote:
Hi!
Does anyone know something about this card?
Hi!
I got answer from Media-Pointer about this Dual DVB-S2-Card.
answer
das Micronas Referenz Design hat auf dem STB6100 (5V Tuner) du dem STV0899
sowie dem LNBH 221 aufgebaut.
Wir haben die neuen Chips verwendet, STB6110A (3V Tuner) und dem STV 0900B
(Cut/2) und dem LNBH 24.
/answer
-Original Message-
From: Steven Toth st...@kernellabs.com
Sent: Jun 22, 2009 7:29 AM
To: whelky-82...@mypacks.net
Cc: linux-media@vger.kernel.org
Subject: Re: Hauppauge HVR-1250 IR Support? (CX23885)
whelky-82...@mypacks.net wrote:
I was wondering if anyone is working on IR support for
From: Muralidharan Karicheri m-kariche...@ti.com
Fix documentation style based on comments from Mauro.
Reviewed by: Hans Verkuil hverk...@xs4all.nl
Reviewed by: Mauro Carvalho Chehab mche...@redhat.com
Signed-off-by: Muralidharan Karicheri m-kariche...@ti.com
---
Applies to v4l-dvb repository
Aguirre Rodriguez, Sergio Alberto wrote:
-Original Message-
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Zach LeRoy
Sent: Wednesday, June 17, 2009 5:06 PM
To: linux-omap; linux-media@vger.kernel.org
Subject: OMAP34XXCAM: Micron
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Jun 22 19:00:07 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 12124:57f76a6d4f1c
gcc version: gcc
whelky-82...@mypacks.net wrote:
-Original Message-
From: Steven Toth st...@kernellabs.com
Sent: Jun 22, 2009 7:29 AM
To: whelky-82...@mypacks.net
Cc: linux-media@vger.kernel.org
Subject: Re: Hauppauge HVR-1250 IR Support? (CX23885)
whelky-82...@mypacks.net wrote:
I was wondering if
sacha wrote:
Forget all that has with stability to do on Linux, it will never work!
It is my experience after three years of desperate trying. I have the
same card and some others. Sometimes they works sometimes no. 24 hours
running is called High Availability in IT world and can be assured only
Hi,
I've been watching and recording free channels for almost a couple of
year with this card, using MythTV, but suddenly some weeks ago I
couldn't any more.
I thought it was a problem with the signal in my region, but it could
not be the case, since I still can watch TV perfectly fine with the
On Mon, Jun 22, 2009 at 5:01 PM, Laszlo Kustanlkus...@gmail.com wrote:
Hi again,
Here is the correct dmesg output when my usb port is recognized
properly The output is kind of weird, because this tuner does not have
radio but according to dmesg it is switching the device to FM mode...
[
Hello again. I have some updates now that I've been able to make some further
tests.
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctly under
Windows. The scanning detects the one channel we're running over our closed
circuit cable (channel 3) and displays it on-screen
Oh, and in case it's useful, here are my video modules before plugging in the
Pinnacle device...
lsmod | grep vid
video 19856 0
output 4736 1 video
hwmon_vid 4352 1 it87
nvidia 9555940 0
agpgart34760 1 nvidia
On Mon, Jun 22, 2009 at 5:39 PM, George Adamsg_adam...@hotmail.com wrote:
Hello again. I have some updates now that I've been able to make some
further tests.
1) My Pinnacle PCTV HD Pro (800e) stick does, in fact, work correctly under
Windows. The scanning detects the one channel we're
On Mon, Jun 22, 2009 at 5:39 PM, George Adamsg_adam...@hotmail.com wrote:
Hello again. I have some updates now that I've been able to make some
further tests.
snip
Also, do you have the device plugged in via a powered USB hub? And if
so, are you unplugging the 800e from the hub, or are you
On Monday 22 June 2009 07:13:49 Andreas Oberritter wrote:
Juergen Urban wrote:
Now I've a problem with the 1-byte-checksum calculation. Each message
which I send to the device has a checksum (last byte). I don't know how
to calculate the checksum.
Did someone know how to reverse engineer
On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
Hi list!
It seems the path to lsmod tool is hardcoded in the Makefile for out-of-tree
building of v4l-dvb.
Now at least gentoo has moved lsmod from /sbin to /bin.
Additionally it is bad style (or at least I am told so), to not
On Mon, 22 Jun 2009, Andy Walls wrote:
On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
Hi list!
It seems the path to lsmod tool is hardcoded in the Makefile for out-of-tree
building of v4l-dvb.
Now at least gentoo has moved lsmod from /sbin to /bin.
Won't your patch cause
On Mon, 22 Jun 2009, Andy Walls wrote:
On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
Hi list!
It seems the path to lsmod tool is hardcoded in the Makefile for out-of-tree
building of v4l-dvb.
Now at least gentoo has moved lsmod from /sbin to /bin.
Sorry, but is it
I sent out a new patch yesterday under a different subject line, but it
looks like it did not make through it. Is this list a moderated one?
Anyway, please ignore yesterday's patch if you have not had a chance to
look at it. Please use this following patch, which is against 1283. It
contains:
Ok, here's something to try. I assume you are rebooting the box,
keeping the stick plugged in. Please unplug the device, plug it back
in, and then post the full dmesg output.
Devin
Actually I've been unplugging the device, booting, letting the system settle
down, then plugging the device
Hi,
Am Montag, den 22.06.2009, 18:43 -0500 schrieb Yufei Yuan:
I sent out a new patch yesterday under a different subject line, but it
looks like it did not make through it. Is this list a moderated one?
Anyway, please ignore yesterday's patch if you have not had a chance to
look at it.
Paul,
I have a Happauge HVR-1800 with a CX-23885 chip that I would like to get
working the same way you described in your email to George. It does work
correctly with MythTV, but like you I've not been able to get it to work with
Totem Movie Player, MeTV or any of the other players I've tried.
I noted from a discussion in the list back in April there were
problems with SAA7133 devices under 2.6.29 Kernel.
I have such a device and just upgraded to Fed 11 yesterday, device now
fails. Under Fed 10 no problems.
I'm happy to provide dmesg and lspci and whatever else you need,
however
Hi,
Am Dienstag, den 23.06.2009, 03:02 +0100 schrieb Another Sillyname:
I noted from a discussion in the list back in April there were
problems with SAA7133 devices under 2.6.29 Kernel.
I have such a device and just upgraded to Fed 11 yesterday, device now
fails. Under Fed 10 no problems.
On Mon, Jun 22, 2009 at 10:40 PM, Robert
Krakorarob.krak...@messagenetsystems.com wrote:
On Mon, Jun 22, 2009 at 5:39 PM, George Adamsg_adam...@hotmail.com wrote:
Hello again. I have some updates now that I've been able to make some
further tests.
1) My Pinnacle PCTV HD Pro (800e) stick
Am Montag, den 22.06.2009, 22:48 -0400 schrieb Robert Krakora:
On Mon, Jun 22, 2009 at 10:40 PM, Robert
Krakorarob.krak...@messagenetsystems.com wrote:
On Mon, Jun 22, 2009 at 5:39 PM, George Adamsg_adam...@hotmail.com wrote:
Hello again. I have some updates now that I've been able to
Are these the same boards and/or different revisions? Are they supported by
the Mantis driver including the CI? This part I wasn't able to confirm from
my search.
Thomas,
The maintis driver currently doesn't support CI. Unfortunately I
bought a Twinhan SP300 (1034) before I knew this, so I
Hi,
I've a LV5H clone marketed in Italy under Extreme Technology brand
which does not work under Ubuntu Jaunty (kernel version 2.6.30 used to
solve intel graphics video card performance issue).
It is identified by:
idVendor=eb1a, idProduct=2883
I tried to use it using the following
61 matches
Mail list logo
