.
But I do have the following question.
If the lane-polarities property is not specified, shouldn't the
relevant struct member (bus-lane_polarities[i]) be set to 0?
Regards,
Benoit
Example
--
1.7.10.4
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body
Sakari Ailus sakari.ai...@iki.fi wrote on Fri [2015-Apr-24 22:49:33 +0300]:
Hi Benoit,
On Fri, Apr 24, 2015 at 02:41:00PM -0500, Benoit Parrot wrote:
Sakari Ailus sakari.ai...@iki.fi wrote on Thu [2015-Mar-26 00:57:36
+0200]:
Add lane-polarity property to endpoint nodes
Paul Walmsley p...@pwsan.com wrote on Mon [2015-Jan-26 18:47:11 +]:
Hi Prabhakar,
On Mon, 26 Jan 2015, Lad, Prabhakar wrote:
Hi Benoit,
On Mon, Jan 26, 2015 at 3:50 PM, Benoit Parrot bpar...@ti.com wrote:
Lad, Prabhakar prabhakar.cse...@gmail.com wrote on Mon [2015-Jan-26
Suspend/resume is functional with this patch.
Tested-by: Benoit Parrot bpar...@ti.com
Lad, Prabhakar prabhakar.cse...@gmail.com wrote on Mon [2015-Jan-26 08:21:28
+]:
From: Benoit Parrot bpar...@ti.com
this patch adds VPFE HWMOD data for AM43xx.
Signed-off-by: Benoit Parrot bpar
Lad, Prabhakar prabhakar.cse...@gmail.com wrote on Mon [2015-Jan-26 08:13:01
+]:
Hi Paul,
Thanks for the review.
On Mon, Jan 26, 2015 at 2:15 AM, Paul Walmsley p...@pwsan.com wrote:
Hi
On Sun, 25 Jan 2015, Lad, Prabhakar wrote:
From: Benoit Parrot bpar...@ti.com
up this list as well.
Cc: Benoît Cousson bcous...@baylibre.com
Cc: Tony Lindgren t...@atomide.com
Cc: linux-omap@vger.kernel.org
Cc: devicet...@vger.kernel.org
Signed-off-by: Nishanth Menon n...@ti.com
Acked-by: Benoît Cousson bcous...@baylibre.com
Thanks,
Benoit
---
MAINTAINERS |3
Hi Tony,
On 23/04/2014 16:48, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140422 07:14]:
Hi Leigh,
On 16/04/2014 13:26, Leigh Brown wrote:
In ARM: dts: am33xx: correcting dt node unit address for usb, the
usb_ctrl_mod and cppi41dma nodes were updated with the correct
Hi Ezequiel,
On 23/04/2014 17:17, Ezequiel Garcia wrote:
On Apr 23, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140422 07:14]:
Hi Leigh,
On 16/04/2014 13:26, Leigh Brown wrote:
In ARM: dts: am33xx: correcting dt node unit address for usb, the
usb_ctrl_mod and cppi41dma
-by: Leigh Brown le...@solinno.co.uk
If this is a final version, I'll apply it for -rc3.
Thanks,
Benoit
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 4 ++--
arch/arm/boot/dts/am335x-evm.dts | 4 ++--
arch/arm/boot/dts/am335x-evmsk.dts| 4 ++--
arch/arm/boot/dts/am335x
it if either of you want.
Feel free to queue it, I don't have anything else pending so far, so I
was not planning to do a pull request.
Acked-by: Benoit Cousson bcous...@baylibre.com
Thanks,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from
On 02/03/2014 23:17, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140302 12:45]:
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks pulling into omap-for-v3.15/dt.
Thank you Tony.
Regards,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux
= default;
+ pinctrl-0 = i2c2_pins;
+
+ status = okay;
+ clock-frequency = 10;
+
+ tlv320aic3106: tlv320aic3106@1b {
A more generic name will be prefered here.
Regards,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from
Hi Sourav,
On 21/02/2014 15:28, Sourav Poddar wrote:
Hi Benoit,
On Tuesday 14 January 2014 07:51 PM, Benoit Cousson wrote:
Hi Felipe,
On 14/01/2014 14:14, Felipe Balbi wrote:
On Mon, Jan 13, 2014 at 10:13:13PM +0530, sourav wrote:
Benoit,
On Thursday 19 December 2013 06:03 PM, Sourav
andy...@gmail.com
Signed-off-by: Archit Taneja arc...@ti.com
I've just applied your patch.
Thanks,
Benoit
---
Documentation/devicetree/bindings/arm/omap/dmm.txt | 22 ++
arch/arm/boot/dts/dra7.dtsi| 7 +++
arch/arm/boot/dts/omap4.dtsi
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks,
Benoît
The following changes since commit 6d0abeca3242a88cab8232e4acd7e2bf088f3bc2:
Linux 3.14-rc3 (2014-02-16 13:30:25 -0800)
are available in the git repository at:
, Touchscreen and WLAN driver changes haven't
made it into 3.14, so the patchset I mailed is complete.
Sorry for the delay, I've just applied them for 3.15.
BTW, do you have any other pending DTS patches?
Thanks,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
just before your modification in the patch itself.
Thanks,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
.
Yeah, I will have to sync with Tony to understand what will be in 3.14-rc1.
Do you have strong dep with the series Tony has done?
Regards,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line unsubscribe linux-omap
Hi Felipe,
On 14/01/2014 14:14, Felipe Balbi wrote:
On Mon, Jan 13, 2014 at 10:13:13PM +0530, sourav wrote:
Benoit,
On Thursday 19 December 2013 06:03 PM, Sourav Poddar wrote:
Add gpio keys node for am43x gp evm.
Signed-off-by: Sourav Poddarsourav.pod...@ti.com
---
arch/arm/boot/dts
]
for the patch 18.
Benoit: I guess that I am too late for the 3.14... ?
Yeah, I think so, even my 3.14 branch is too late for 3.14 :-)
Thanks,
Benoit
Regards,
Florian
Florian Vaussard (18):
of: add vendor prefix for Gumstix
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts
.
Thanks for that. I've just applied it.
Regards,
Benoit
Signed-off-by: Nishanth Menon n...@ti.com
---
arch/arm/boot/dts/omap3430-sdp.dts |4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts
b/arch/arm/boot/dts/omap3430-sdp.dts
index 281914e..cd3d047
pushing my branch after Xmas :-).
Thanks,
Benoit
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused
platform init code and headers
Bootlog: http://pastebin.mozilla.org/3744412
arch/arm/boot
On 18/12/2013 18:02, Nishanth Menon wrote:
On 12/18/2013 10:57 AM, Benoit Cousson wrote:
On 17/12/2013 20:45, Nishanth Menon wrote:
On 12/09/2013 03:55 PM, Nishanth Menon wrote:
Craneboard is a hardware development platform based on the Sitara
AM3517 ARM Cortex - A8 microprocessor device
Hi Sourav,
On 18/12/2013 18:43, Sourav Poddar wrote:
Benoit,
On Wednesday 27 November 2013 01:01 PM, Sourav Poddar wrote:
The patch series adds support for enabling gpio, pwm backlight and
matrix gpio keys on am43x-gp-evm.
Done on top of 3.13-rc1 + tero clock series(1) + Afzal's basic gp
On 18/12/2013 19:15, Sourav Poddar wrote:
On Wednesday 18 December 2013 11:19 PM, Benoit Cousson wrote:
Hi Sourav,
On 18/12/2013 18:43, Sourav Poddar wrote:
Benoit,
On Wednesday 27 November 2013 01:01 PM, Sourav Poddar wrote:
The patch series adds support for enabling gpio, pwm backlight
-by: Roger Quadros rog...@ti.com
Acked-by: Paul Walmsley p...@pwsan.com
Will you pick this up for the -rc series, or do you want me or Tony to?
Roger writes that this one's pretty important.
I guess, it is better for you to take it. I don't have anything queued
for -rc.
Acked-by: Benoit Cousson bcous
...@ti.com
---
Hi,
This patch is needed for 3.13 to get the LCD backlight to work again.
OK, so this is a fix for the next -rc?
Regards,
Benoit
Regards,
Peter
arch/arm/boot/dts/omap4-sdp.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm
Hi Jyri,
A side question related to audio cape support on BBB. In the official
3.8.13 CircuitCo version the HDMI audio support was breaking the
audio-cape support due to some bad hacks in the mcasp driver.
Is this still the case with you series?
Thanks,
Benoit
On 19/11/2013 13:21, Jyri
-dt.git:for_3.13/dts.
Thanks, I've just applied the whole series.
Regards,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
...@gmail.com
It's probably best that you take it via with the LED patches.
OK, I will do it. what about PATCH 2 of this patch set? Will you take
care of it?
Benoit should take that one, otherwise there's a good chance of
pointless merge conflicts with the .dts files.
I've just merged
support for dmic.
Regards,
Peter
I've just applied your series, let's try to push that for 3.13.
Thanks,
Benoit
---
Peter Ujfalusi (2):
ARM: dts: omap5-uevm: Correct twl6040 reset GPIO pinmux
ARM: dts: omap5-uevm: Remove pinmux for dmic pins
arch/arm/boot/dts/omap5-uevm.dts | 12
Hi Tony,
Please pull the branch for even more OMAP Device Tree for v3.13 or later.
Thanks,
Benoit
The following changes since commit 6a96867844895008558810853c7838af39dd317c:
ARM: dts: AM33xx+: Add i2c aliases (2013-10-22 11:05:42 +0200)
are available in the git repository at:
git
for:
'Multichannel Audio Serial Port' and this is pretty much what McASP is.
Yes, I do agree, there are tons of nodes that cannot have generic name.
Moreover, we are already using that name in few OMAP dts, so for
consistency, let's keep that name.
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology
will reach 3.13 :-(
Thanks,
Benoit
Signed-off-by: Enric Balletbo i Serra eballe...@gmail.com
---
arch/arm/boot/dts/am335x-igep0033.dtsi | 13 +
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi
b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 06eba07
Hi Tony,
Please pull the branch for few more OMAP Device Tree for v3.13 or later.
Thanks,
Benoit
The following changes since commit 6cf02dbb4b71f1c0c9acec89ae2df3b2318135f4:
ARM: dts: dra7-evm: Add mmc2 node for eMMC support (2013-10-11 21:15:02 +0200)
are available in the git repository
on
top of my for_3.13/dts?
Thanks,
Benoit
On 06/10/2013 22:27, Sebastian Reichel wrote:
Add SSI device tree data for OMAP3 and Nokia N900.
Signed-off-by: Sebastian Reichel s...@debian.org
---
arch/arm/boot/dts/omap3-n900.dts | 12 ++
arch/arm/boot/dts/omap3.dtsi | 47
)
RTC (Maxim DS1338)
GPIO Expander (Microchip MCP23017)
Expansion connector:
6 x UART
1 x MMC/SD
1 x USB2.0
Signed-off-by: Mark Jackson m...@newflow.co.uk
Reviewed-by: Javier Martinez Canillas javier.marti...@collabora.co.uk
Thanks I've just applied it.
Regards,
Benoit
Hi Markus,
On 14/10/2013 14:49, Markus Pargmann wrote:
Control module is not usb specific. This patch changes the label to
usb_ctrl_mod.
Signed-off-by: Markus Pargmann m...@pengutronix.de
I've just applied it.
Thanks,
Benoit
---
arch/arm/boot/dts/am33xx.dtsi | 6 +++---
1 file changed
Hi Eric,
On 18/10/2013 08:42, Eric Witcher wrote:
Correct mcspi pin descriptions to match corresponding node name and
add chip select number to be consistent with OMAP5 TRM.
Signed-off-by: Eric Witcher ewitc...@mindspring.com
Applied on my tree.
Thanks,
Benoit
---
arch/arm/boot/dts
Hi Sebastian,
On 22/10/2013 16:44, Sebastian Reichel wrote:
Hi Benoit,
On Tue, Oct 22, 2013 at 02:48:45PM +0200, Benoit Cousson wrote:
Thanks to Tony, I've just realized that I missed all your patches,
that for some reason ended-up in my junk folder :-(
oh :( Can you check why they ended up
to Benoit's for_3.13/dts [5]
I've just applied them in my DTS tree.
Thanks,
Benoit
- patch 8 needs to depend on [1] and should eventually go to [5]
NOTES: obviously without clock nodes cpufreq will not function.
Test Script: http://pastebin.com/VvJPjsne
Test-log:
BeagleBoard-XM
Hi Jyri,
On 20/10/2013 19:04, Jyri Sarha wrote:
Hi Benoit,
I rebased the DTS patches on top of
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.13/dts -branch
and tested the result. Hope that was the right branch.
Yes, thanks for the update.
I've just applied
Hi Lokesh,
On 18/10/2013 05:49, Lokesh Vutla wrote:
Hi Benoit,
On Friday 11 October 2013 12:44 AM, Lokesh Vutla wrote:
This patch series add nodes for l2-cache-controller, EDMA, mailbox, mmc, sham,
and updates the properties for cpsw, i2c0, matrix-keypad.
These patches are applied on top
it?
Thanks,
Benoit
Regards,
Tony
---
v3: Added Tony's ACK properties for generic USB PHY framework.
Previous version: http://marc.info/?t=138005105700010r=1w=2
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/omap3-n9.dts | 18
arch/arm/boot/dts
Hi Roger,
On 18/10/2013 14:00, Roger Quadros wrote:
Hi Benoit,
Could you please include this one for 3.13?
Without this OTG port will be broken for beagle. Thanks.
I've just applied it.
Thanks,
Benoit
cheers,
-roger
On 10/07/2013 01:46 PM, Roger Quadros wrote:
The generic PHY framewrok
+ Tony
Hi Jyri,
The DTS part looks fine to me, but does not apply at all on my branch,
Could you rebase it and repost it without the driver part to avoid any
issue during the driver merge?
Thanks,
Benoit
On 18/10/2013 17:37, Jyri Sarha wrote:
The v4 version of patches can be found here
Hi Kishon,
On 16/10/2013 15:17, Kishon Vijay Abraham I wrote:
Benoit,
On Tuesday 15 October 2013 11:19 AM, Kishon Vijay Abraham I wrote:
From: George Cherian george.cher...@ti.com
Added dr_mode property in dwc3 and set its default mode to device.
Currently dwc3 driver doesn't have support
Hi Kishon,
On 16/10/2013 15:27, Nishanth Menon wrote:
On 10/16/2013 08:17 AM, Kishon Vijay Abraham I wrote:
Benoit,
On Thursday 10 October 2013 04:19 PM, Kishon Vijay Abraham I wrote:
smps10 should be enabled only in the case of host mode. So stop
doing always_on, boot_on from smps10_out1
Hi Lokesh,
On 12/10/2013 15:26, Lokesh Vutla wrote:
Hi Benoit,
On Thursday 29 August 2013 06:22 PM, Lokesh Vutla wrote:
Add the AM33xx RNG module's device tree data.
Also add Documentation file describing the data
for the RNG module.
Seems you missed this patch. Please consider
Hi Roger,
On 14/10/2013 11:20, Roger Quadros wrote:
Hi Benoit,
On 10/10/2013 06:34 PM, Felipe Balbi wrote:
On Mon, Oct 07, 2013 at 04:28:13PM +0300, Roger Quadros wrote:
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB
Hi Rajendra,
On 09/10/2013 18:45, Benoit Cousson wrote:
+ A couple of DT maintainers
On 09/10/2013 18:41, Rajendra Nayak wrote:
On Wednesday 09 October 2013 08:43 PM, Benoit Cousson wrote:
Hi Rajendra,
On 09/10/2013 12:11, Rajendra Nayak wrote:
On OMAP we have co-processor IPs, memory
series from Rajendra:
http://marc.info/?l=linux-docm=138131355520116w=2
Applies on Benoit's for_13/dts branch:
https://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.13/dts
I've just applied it after Rajendra's series.
Thanks,
Benoit
Tested on PandaBoard-ES without
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.13.
Thanks,
Benoit
The following changes since commit d0e639c9e06d44e713170031fe05fb60ebe680af:
Linux 3.12-rc4 (2013-10-06 14:00:20 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux
Hi Tony,
On 11/10/2013 20:03, Tony Lindgren wrote:
Hi Benoit,
* Benoit Cousson bcous...@baylibre.com [131011 09:50]:
Add the minimal DTS support for DRA7xx based SoC core.
Add the initial support for N900 and gta04 phones.
Enable USB3 on OMAP5 evm board.
Add support for cryto accelerators
Add
support for gpio-pcf857x is available, input supply
will be modelled as cascaded regulator.
Signed-off-by: Balaji T K balaj...@ti.com
Acked-by: Sekhar Nori nsek...@ti.com
Hi Benoit,
Can you let me know if you have any comments on this patch series?
The series looks good, and I've just applied
Hi Tony,
Please pull the updated branch for OMAP Device Tree for v3.13.
I removed the 2 conflicting patches, and added 2 mores for dra7 to compensate
:-)
Thanks,
Benoit
The following changes since commit d0e639c9e06d44e713170031fe05fb60ebe680af:
Linux 3.12-rc4 (2013-10-06 14:00:20 -0700
] http://marc.info/?l=linux-omapm=138139106312786w=2
Cc: Benoit Cousson bcous...@baylibre.com
Signed-off-by: Sricharan R r.sricha...@ti.com
---
Acked-by: Santosh Shilimkar santosh.shilim...@ti.com
I've just applied it for 3.13.
Thanks,
Benoit
--
To unsubscribe from this list: send the line
easier for you and Benoit to pick them up independently.
If you could do it soon, I'm about to send an early pull request to Tony
to avoid the trouble we had last time.
Thanks,
Benoit
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord
there are erratas which prevent an IP
from being reset)
Have a way to pass this information from DT.
Did you get some acked-by from the DT maintainers?
Every new bindings must be carefully reviewed now.
Regards,
Benoit
Update the am33xx/omap4 and omap5 dtsi files with the
new bindings for modules which
+ A couple of DT maintainers
On 09/10/2013 18:41, Rajendra Nayak wrote:
On Wednesday 09 October 2013 08:43 PM, Benoit Cousson wrote:
Hi Rajendra,
On 09/10/2013 12:11, Rajendra Nayak wrote:
On OMAP we have co-processor IPs, memory controllers,
GPIOs which control regulators and power switches
Hi Javier
On 07/10/2013 17:12, Javier Martinez Canillas wrote:
Hi Benoit,
This series are some enhancements and cleanups for IGEP boards
that it would be great if can make it for v3.13.
This is a third version of the patch-set that addresses some issues
raised by Roger Quadros and is composed
, 102 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt
create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
I've just applied this series and the remaining ones from the previous
version.
Thanks,
Benoit
--
To unsubscribe from
.
Thanks,
Benoit
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
] - git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
Hi Roger,
Thanks for the pointer, I'll add those properties and test using the PHY generic
framework.
Should I expect a v3 then?
Benoit
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body
On 07/10/2013 14:02, Javier Martinez Canillas wrote:
On 10/07/2013 01:58 PM, Benoit Cousson wrote:
Hi Javier,
On 07/10/2013 13:54, Javier Martinez Canillas wrote:
On 10/07/2013 12:43 PM, Roger Quadros wrote:
Javier,
On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote:
Commit ad871c10b
100644 arch/arm/boot/dts/am335x-base0033.dts
create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi
--
1.8.1.2
Hi Benoit and Tony,
Any comments on this series? I had already reviewed previous versions
of the DT and it looks good to me now.
It would be great if this can make it for 3.13
) /*
gpmc_ad1.mmc1_dat1 */
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /*
gpmc_ad2.mmc1_dat2 */
Thanks, I'll apply it for 3.13.
Regards,
Benoit
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More
@@ -423,4 +423,5 @@
mmc1 {
status = okay;
vmmc-supply = vmmc_reg;
+ bus-width = 4;
};
Thanks, I'll apply it for 3.13.
Regards,
Benoit
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo
On 04/10/2013 04:00, Joel Fernandes wrote:
On 10/03/2013 08:25 AM, Benoit Cousson wrote:
+ DT list and DT maintainers.
Hi Joel,
Thanks for the update. It looks good to me.
For the new bindings added below;
.../devicetree/bindings/crypto/omap-aes.txt| 34
On 30/09/2013 17:13, Joel Fernandes wrote:
Signed-off-by: Joel Fernandes jo...@ti.com
Even if this is obvious, a small changelog is always recommended.
Thanks,
Benoit
---
arch/arm/boot/dts/am33xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts
On 02/10/2013 15:54, David Gibson wrote:
On Tue, Oct 01, 2013 at 03:54:20PM -0500, Rob Herring wrote:
On Tue, Oct 1, 2013 at 10:06 AM, Benoit Cousson bcous...@baylibre.com wrote:
Hi Rob,
On 01/10/2013 15:17, Rob Herring wrote:
On 10/01/2013 03:06 AM, Benoit Cousson wrote:
+ more DT
Hi Roger,
Yes, I will. I've been waiting for these ones for so long :-)
Thanks,
Benoit
On 03/10/2013 12:34, Roger Quadros wrote:
Hi Benoit,
Could you please take the device tree related patches [5 to 10] in this series?
Thanks.
cheers,
-roger
On 09/24/2013 11:53 AM, Roger Quadros wrote
Hi Stephen,
On 02/10/2013 00:22, Stephen Warren wrote:
On 09/24/2013 10:52 AM, Benoit Cousson wrote:
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here is a first attempt
to introduce:
- a schema language to define
of the DT maintainers.
Regards,
Benoit
On 30/09/2013 17:12, Joel Fernandes wrote:
Following series is a collection of dts patches for the below features:
crypto:
aes, sha on am335x
aes, des on am437x
aes, des on omap4
display:
beaglebone black HDMI
am335x-evm panel
Series is based
been waiting for some time for it, I fixed it myself and pulled
it.
I even fixed the changelog... Lucky you :-)
You can check the updated version below.
Sorry for the delay.
Thanks,
Benoit
---
From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001
From: Keerthy j-keer...@ti.com
On 03/10/2013 14:05, Benoit Cousson wrote:
Hi Roger,
Yes, I will. I've been waiting for these ones for so long :-)
In fact it does not apply correctly on my for_3.13/dts branch :-(
error: arch/arm/boot/dts/omap3-beagle.dts: patch does not apply
Patch failed at 0004 ARM: dts: omap3-beagle
Hi David,
On 02/10/2013 16:29, David Gibson wrote:
On Tue, Oct 01, 2013 at 04:22:24PM -0600, Stephen Warren wrote:
On 09/24/2013 10:52 AM, Benoit Cousson wrote:
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here
On 03/10/2013 15:58, Roger Quadros wrote:
Hi Benoit,
On 10/03/2013 04:44 PM, Benoit Cousson wrote:
On 03/10/2013 14:05, Benoit Cousson wrote:
Hi Roger,
Yes, I will. I've been waiting for these ones for so long :-)
In fact it does not apply correctly on my for_3.13/dts branch :-(
error
Hi Jon,
On 01/10/2013 17:17, Jon Loeliger wrote:
Hi Rob,
On 01/10/2013 15:17, Rob Herring wrote:
On 10/01/2013 03:06 AM, Benoit Cousson wrote:
+ more DT maintainers folks
Hi all,
I know this is mostly boring user space code, but I was expecting a
little bit of comments about at least
some base for further discussion during
ARM KS 2013.
I feel alone :-(
If you have any comment, go ahead!
Thanks,
Benoit
On 24/09/2013 18:52, Benoit Cousson wrote:
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here
Hi Rob,
On 01/10/2013 15:17, Rob Herring wrote:
On 10/01/2013 03:06 AM, Benoit Cousson wrote:
+ more DT maintainers folks
Hi all,
I know this is mostly boring user space code, but I was expecting a
little bit of comments about at least the bindings syntax:-(
I'd like to know
Hi Joel,
On 26/09/2013 00:01, Joel Fernandes wrote:
Following series is a collection of dts patches for the below features:
crypto:
aes, sha on am335x
aes, des on am437x
aes, des on omap4
display:
beaglebone black HDMI
am335x-evm panel
Series is based on Benoit Cousson's for_3.13
= GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH;
Regards,
Benoit
+ dmas = sdma 111, sdma 110;
+ dma-names = tx, rx;
+ };
};
};
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord
,
Benoit
Signed-off-by: Aaro Koskinen aaro.koski...@iki.fi
---
arch/arm/boot/dts/omap3-devkit8000.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts
b/arch/arm/boot/dts/omap3-devkit8000.dts
index 7ef2827..4665421 100644
--- a/arch/arm
be good to use the
standard attribute instead.
Regards,
Benoit
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
/bcousson/linux-omap dts_schema
Regards,
Fabien Benoit
---
Fabien Parent (15):
scripts/dtc: fix most memory leaks in dtc
scripts/dtc: build schema index for dts validation
scripts/dtc: validate each nodes and properties
scripts/dtc: add procedure to handle dts errors
scripts/dtc: check type
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema.c | 234 ++-
1 file changed, 233 insertions(+), 1 deletion(-)
diff --git a/scripts/dtc/schema.c b/scripts/dtc/schema.c
index dd134d6..a797821 100644
--- a/scripts/dtc/schema.c
.
dtc-lexer: Do not duplicate the string which contains literals because the
string is directly converted afterward to an integer and is never used again.
livetree: Add a bunch of free helper functions to clean properly the dt.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit
description;
value = ti,omap4430-timer;
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/.gitignore| 2 +-
scripts/dtc/Makefile | 9 +-
scripts/dtc/dtc.c | 19 ++-
scripts/dtc/dtc.h | 11
to missing
constraints.
Activate the verbose mode by default into the Makefile.
Usage example:
dtc -M ./bindings -B 1 file.dts
A count of errors found so far as also been added and is printed
on each error.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous
is a string array for the dts above one can use the following schema:
/ {
compatible = abc;
abc {
type = integer;
};
def {
type = string;
};
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/data.c
-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c | 10
scripts/dtc/schema.c | 63 --
scripts/dtc/tests/schemas/nodes-count-1.schema | 5 ++
scripts/dtc
/;
/ {
compatible = ti,omap[0-9]+-timer;
ti,hwmods {
is-required;
};
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c| 6 ++
scripts/dtc/schema.c
as well four test files for the feature.
Usage example:
node {
compatible = array_size;
myarray = 0 1 2 3 4;
};
Schema:
/dts-v1/;
/ {
compatible = array_size;
myarray {
length = 5;
};
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson
as specified inside a schema.
Add as well a routine to print error message using these informations in case
of validation error.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/dtc-parser.tab.c_shipped | 595
subnode 'subnode1', 'subnode2', and
'abc' with the schema below:
/dts-v1/;
/ {
compatible = comp;
children = abc, subnode[0-9];
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c
element of an array has the correct value one
can use the following constraint:
prop1 {
type = integer;
value@2 = 2;
};
or
prop2 {
type = string;
value@1 = value1;
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson
have the
value 0xa.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c | 16 +++
scripts/dtc/schema.c| 126 +++-
scripts/dtc/tests/schemas/parent
From: Fabien Parent fpar...@baylibre.com
Introduce a couple of real schema for OMAP DTS files. For the moment validate
only: MPU, DSP, INTC, IVA, TIME and COUNTER.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
bindings/arm/omap
From: Fabien Parent fpar...@baylibre.com
Add the path of the bindings schema directory on the command line used
for compiling the dts files. The dts files will be validated against all the
matching schemas found.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson
1 - 100 of 1897 matches
Mail list logo