> -Original Message-
> From: Arend Van Spriel [mailto:arend.vanspr...@broadcom.com]
> Sent: Sunday, September 18, 2016 21:54
> To: Otcheretianski, Andrei ; Luca Coelho
> ; johan...@sipsolutions.net
> Cc: linux-wireless@vger.kernel.org; Beker, Ayala ;
> Grumbach, Emmanuel ; Coelho, Luciano
>
Hi Kalle,
Here we go again, now I'm almost catching up with the pending stuff in
our internal tree, just in time for 4.9. This pull contains a bunch of
fixes to DQA and new HW support code, a few new features and some
cleanups. More details in the tag description.
Let me know if everything's fi
From: Liad Kaufman
Variable "ac" defined twice. Fix that.
Fixes: commit 93f436e2c7fe ("iwlwifi: mvm: set sta_id in SCD_QUEUE_CONFIG cmd")
Signed-off-by: Liad Kaufman
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 6 +++---
1 file changed, 3 insertions(+), 3 dele
From: Sara Sharon
commit 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwl
From: Sara Sharon
Use skb_queue_empty() and not skb_peek_tail() to check for
empty list.
Avoid a redundant check as well - loop will take care of it.
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 13 +++--
1 file changed, 7 i
From: Haim Dreyfuss
In 9000 family products we added an option to let the OEM fuse the
mac address via registers. If these registers are zeroed we use the OTP
address instead. Make sure that the address provided by the OEM is valid
and, if not, fall back to the OTP address as well.
Fixes: commit
From: Avrahams Stern
Implement support for RRM by adding an option to configure the scan
dwell time and reporting scan start time and BSS detection time, and
Advertise support for these features.
Signed-off-by: David Spinadel
Signed-off-by: Avraham Stern
Signed-off-by: Luca Coelho
---
driver
From: Aviya Erenfeld
enable MU-MIMO air sniffer if it's supported by the NIC
Signed-off-by: Aviya Erenfeld
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac802
From: Sara Sharon
On default queue we will not receive frame release notification,
but the BAR itself.
Upon receiving the BAR driver should look at the NSSN and adjust
window accordingly.
Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue")
Signed-off-by: Sara Sharon
Signed-off-by
From: Sara Sharon
There was recently a Full AP mode feature added where hostap adds
the station at auth stage, and not assoc.
However, when running with legacy hostapd, we get the auth response
before station was added, and tx_skb_non_sta fails to allocate
a queue, resulting in a complete failure
From: Sara Sharon
For automatic testing packet injection can be useful.
Support injection through debugfs.
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 55
1 file changed, 55 insertions(+)
diff --git a/d
From: Johannes Berg
When comparing command IDs, the group should be taken
into account so the same command/notification from a
different group doesn't trigger anything unexpected.
Fix this by comparing to the wide ID.
Fixes: commit 1738d60b31d7 ("iwlwifi: mvm: handle RX MPDUs separately")
Signed
From: Johannes Berg
There's no need to declare a list and then init it manually,
just use the LIST_HEAD() macro.
Signed-off-by: Johannes Berg
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/driv
From: Oren Givon
Add a new PCI ID for the 8265 series.
Signed-off-by: Oren Givon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
b/drivers/net/wireless/intel/iwlwifi
From: Sara Sharon
Log group as well. Remove 0x prefix to match TX logging.
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx
From: Emmanuel Grumbach
This can save a few bytes
Signed-off-by: Emmanuel Grumbach
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/iwl-devtrace.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-devtrace.c
b/drivers/net/wireless/i
From: Roee Zamir
New function, reveals the diff between gp2 and host time.
Signed-off-by: Roee Zamir
Signed-off-by: Luca Coelho
---
.../net/wireless/intel/iwlwifi/mvm/debugfs-vif.c | 26 ++
1 file changed, 26 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi
From: Johannes Berg
When we get an unexpected Block Ack Request frame, the BAID from
the hardware will be invalid, and we'll pass it to mac80211 for
further handling (sending a delBA action frame.)
Add a comment explaining that, in case anyone looks in the future.
Signed-off-by: Johannes Berg
From: Johannes Berg
There's no point in making this an out-of-line function
since it just calls a single other function with a few
changed parameters.
Signed-off-by: Johannes Berg
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 7 ---
drivers/net/wireless/in
From: Sara Sharon
Due to firmware design considerations, move to wide ID for
all commands.
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.c | 8 ++--
drivers/net/wireless/intel/iwlwifi/iwl-trans.c | 3 +++
drivers/net/wirel
From: Sharon Dvir
Change PCIE and trans resource allocations to managed resources.
Signed-off-by: Sharon Dvir
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/iwl-trans.c | 8 +--
drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 81 ++---
2 files change
From: Sara Sharon
AP queue is properly released, but P2P queue isn't.
Fixes: commit 4c965139a3cd ("iwlwifi: mvm: support p2p device frames tx on dqa
queue #2")
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 5 +
1 file change
From: Ido Yariv
In order to access cached/paged memory, there are a couple of firmware
commands (one for UMAC and one for LMAC) that let the host access memory
and registers indirectly. Since this is done by the firmware on behalf
of the host, even if memory is paged out or cached, the host will
From: Johannes Berg
There's no need for the common MAC context function to have an
if on AP mode, the values can be overridden in the AP-specific
function later. Clean that up by adding the full command as a
new parameter to the AP-specific function, and doing it there.
Signed-off-by: Johannes B
From: Arik Nemtsov
This will be used by more than MVM, so move it to iwlwifi
While at it, rename WRD_METHOD to the more appropriate
WRDD_METHOD and add some documentation.
Signed-off-by: Arik Nemtsov
Signed-off-by: Johannes Berg
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlw
From: Sara Sharon
Currently it is logged as UNKNOWN.
Also, 0x6c seems to be the permanent ID for this command, remove
incorrect comment and uncomment the command from the commands
list.
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c |
From: Johannes Berg
There's no need to declare a list and then init it manually,
just use the LIST_HEAD() macro.
Signed-off-by: Johannes Berg
Signed-off-by: Luca Coelho
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/driv
From: Johannes Berg
The previous commit added support for specifying the beacon rate
for AP mode. Add features checks to this, and extend it to also
support the rate configuration for mesh networks. For IBSS it's
not as simple due to joining etc., so that's not yet supported.
Signed-off-by: Joha
> -Original Message-
> From: Arend Van Spriel [mailto:arend.vanspr...@broadcom.com]
> Sent: Sunday, September 18, 2016 22:29
> To: Luca Coelho ; johan...@sipsolutions.net
> Cc: linux-wireless@vger.kernel.org; Beker, Ayala ;
> Otcheretianski, Andrei ; Grumbach,
> Emmanuel ; Coelho, Luciano
> -Original Message-
> From: Arend Van Spriel [mailto:arend.vanspr...@broadcom.com]
> Sent: Sunday, September 18, 2016 22:43
> To: Luca Coelho ; johan...@sipsolutions.net
> Cc: linux-wireless@vger.kernel.org; Beker, Ayala ;
> Otcheretianski, Andrei ; Grumbach,
> Emmanuel ; Coelho, Luciano
>
> -Original Message-
> From: Arend Van Spriel [mailto:arend.vanspr...@broadcom.com]
> Sent: Sunday, September 18, 2016 22:54
> To: Luca Coelho ; johan...@sipsolutions.net
> Cc: linux-wireless@vger.kernel.org; Beker, Ayala ;
> Otcheretianski, Andrei ; Grumbach,
> Emmanuel ; Coelho, Luciano
>
> Yes, it's passing all the wpa_supplicant tests, so
>
> Acked-by: Johannes Berg
>
I take that back. I think it's leaking memory - my tests never used to
run out of memory, but now they eventually do.
I'll try to figure out more.
johannes
> OK, it's finally ready now.
>
> This series contains one two patches. The first adds the rhlist
> interface and the second converts mac80211 to use it. If this works
> out I'll then proceed to convert the other insecure_elasticity
> users over to this.
Thanks a lot Herbert!
> I've tested th
Hi Markus,
On Mon, Aug 15, 2016 at 09:12:29AM +0200, SF Markus Elfring wrote:
> From: Markus Elfring
> Date: Mon, 15 Aug 2016 09:00:26 +0200
>
> The field "owner" is set by core. Thus delete an extra initialisation.
>
> Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
> Signed-o
Hi Julia,
On Tue, Aug 09, 2016 at 06:11:02PM +0200, Julia Lawall wrote:
> The pn533_phy_ops are never modified, so declare them as const.
>
> Done with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall
>
> ---
> drivers/nfc/pn533/i2c.c |2 +-
> drivers/nfc/pn533/pn533.c |2 +-
From: Roee Zamir
New function, reveals the diff between gp2 and host time.
Signed-off-by: Roee Zamir
Signed-off-by: Luca Coelho
---
Sorry, I was missing a compilation flag in my .config and missed a
compilation error detected by kbuild-bot. Here's the fix.
In v2:
* added a helper functio
Hi Arend,
On Wed, 2016-09-14 at 20:13 +0200, Arend Van Spriel wrote:
> On 14-9-2016 15:41, Jörg Krause wrote:
> >
> > Hi,
> >
> > On Mon, 2016-08-29 at 23:15 +0200, Jörg Krause wrote:
> > >
> > > On Mi, 2016-08-24 at 20:35 +0200, Arend Van Spriel wrote:
> > > >
> > > >
> > > > On 22-8-2016 15
Hi Julia,
On Tue, Aug 09, 2016 at 07:03:50PM +0200, Julia Lawall wrote:
> The nfcmrvl_if_ops structures are never modified, so declare them as const.
>
> Done with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall
>
> ---
> drivers/nfc/nfcmrvl/i2c.c |2 +-
> drivers/nfc/nfcmrvl/
On Mon, Sep 19, 2016 at 10:25:18AM +0200, Johannes Berg wrote:
>
> > Yes, it's passing all the wpa_supplicant tests, so
> >
> > Acked-by: Johannes Berg
> >
>
> I take that back. I think it's leaking memory - my tests never used to
> run out of memory, but now they eventually do.
>
> I'll try
mac80211 currently uses rhashtable with insecure_elasticity set
to true. The latter is because of duplicate objects. What's
more, mac80211 walks the rhashtable chains by hand which is broken
as rhashtable may contain multiple tables due to resizing or
rehashing.
This patch fixes it by converting
v2 contains a reworked insertion slowpath to ensure that the
spinlock for the table we're inserting into is taken.
This series contains one two patches. The first adds the rhlist
interface and the second converts mac80211 to use it. If this works
out I'll then proceed to convert the other insecu
The insecure_elasticity setting is an ugly wart brought out by
users who need to insert duplicate objects (that is, distinct
objects with identical keys) into the same table.
In fact, those users have a much bigger problem. Once those
duplicate objects are inserted, they don't have an interface t
Hi Kalle,
Please drop my previous pull-request. There was a compilation error
that I missed to due a missing flag in my .config. I fixed it now and
this is the new pull request that includes the fix.
Here we go again, now I'm almost catching up with the pending stuff in
our internal tree, just
> -Original Message-
> From: Arend Van Spriel [mailto:arend.vanspr...@broadcom.com]
> Sent: Sunday, September 18, 2016 23:00
> To: Luca Coelho ; johan...@sipsolutions.net
> Cc: linux-wireless@vger.kernel.org; Beker, Ayala ;
> Otcheretianski, Andrei ; Grumbach,
> Emmanuel ; Coelho, Luciano
>
> > I take that back. I think it's leaking memory - my tests never used
> > to run out of memory, but now they eventually do.
>
> > I'll try to figure out more.
>
> Interesting. The kernel test robot found a bug in the insertion
> slowpath where we end up inserting without taking the inner spin
> Actually, can you apply the v2 (cfg80211: add bitrate for 20MHz MCS
> 9) of this? Systems guys confirmed they use MCS 9 @ 20MHz when LDPC
> is enabled. Also confirmed bitrate should be ok.
I don't really understand that. How can the bitrate be "OK" when the
spec explicitly says it cannot be use
On Mon, 2016-09-19 at 16:40 +0800, Herbert Xu wrote:
> I've tested the rhlist code with test_rhashtable but I haven't
> tested the mac80211 conversion. So please give it a go and see
> if it still works.
This is still running out of memory on my test suite.
Somehow I don't see kmemleak kicking
On Mon, Sep 19, 2016 at 11:15:30AM +0200, Johannes Berg wrote:
> On Mon, 2016-09-19 at 16:40 +0800, Herbert Xu wrote:
>
> > I've tested the rhlist code with test_rhashtable but I haven't
> > tested the mac80211 conversion. So please give it a go and see
> > if it still works.
>
> This is still r
On 17 September 2016 at 00:37, Hsu, Ryan wrote:
[...]
>> + /* WMI and HTT may use separate HIF pipes and are not guaranteed to be
>> + * serialized properly implicitly.
>> + *
>> + * Moreover (most) WMI commands have no explicit acknowledges. It is
>> + * possible to infer
> What does your test suite actually do? Is it something that I
> can run without special hardware?
Yes, it's pretty simple - it spins up a number of VMs with hwsim and
just runs a lot of tests:
https://w1.fi/cgit/hostap/tree/tests/hwsim
I've attached a kernel .config you can use for it.
I'm r
On Mon, 2016-09-19 at 11:27 +0200, Johannes Berg wrote:
> >
> I have a feeling there's a bug with ht->nelems, since the crash is
> always in the grow worker, but I haven't quite put my finger on it
> yet.
>
Btw, I should not actually get into the duplicate case here.
johannes
On 19-9-2016 11:00, Johannes Berg wrote:
>
>> Actually, can you apply the v2 (cfg80211: add bitrate for 20MHz MCS
>> 9) of this? Systems guys confirmed they use MCS 9 @ 20MHz when LDPC
>> is enabled. Also confirmed bitrate should be ok.
>
> I don't really understand that. How can the bitrate be
On Montag, 19. September 2016 08:43:56 CEST Simon Wunderlich wrote:
[...]
> > We're testing encrypted AP + Mesh quite successfully right now with
> > this firmware: https://github.com/kvalo/ath10k-firmware/commit/307cb46b
> > 06661ebd3186723b5002de769c7add83, of course that is for a QCA4019 chip.
>
On Mon, Sep 19, 2016 at 11:27:24AM +0200, Johannes Berg wrote:
>
> I have a feeling there's a bug with ht->nelems, since the crash is
> always in the grow worker, but I haven't quite put my finger on it yet.
Can you show me a stack trace?
Thanks,
--
Email: Herbert Xu
Home Page: http://gondor.a
On Mon, 2016-09-19 at 17:34 +0800, Herbert Xu wrote:
> On Mon, Sep 19, 2016 at 11:27:24AM +0200, Johannes Berg wrote:
> >
> >
> > I have a feeling there's a bug with ht->nelems, since the crash is
> > always in the grow worker, but I haven't quite put my finger on it
> > yet.
>
> Can you show me
On Mon, 2016-09-19 at 17:34 +0800, Herbert Xu wrote:
> On Mon, Sep 19, 2016 at 11:27:24AM +0200, Johannes Berg wrote:
> >
> >
> > I have a feeling there's a bug with ht->nelems, since the crash is
> > always in the grow worker, but I haven't quite put my finger on it
> > yet.
>
> Can you show me
> The stack trace is useless, but my other annotation showed that the
> table's nelems *underflowed* to -1, so now the worker will continue
> to try to grow it forever.
>
And this *was* actually a case of duplication, afaict, since it was
multiple virtual interfaces on the same device all connec
On Mon, 2016-09-19 at 11:54 +0200, Johannes Berg wrote:
> >
> > The stack trace is useless, but my other annotation showed that the
> > table's nelems *underflowed* to -1, so now the worker will continue
> > to try to grow it forever.
> >
>
> And this *was* actually a case of duplication, afaict
On Mon, 2016-09-19 at 12:02 +0200, Johannes Berg wrote:
> On Mon, 2016-09-19 at 11:54 +0200, Johannes Berg wrote:
> >
> > >
> > >
> > > The stack trace is useless, but my other annotation showed that
> > > the
> > > table's nelems *underflowed* to -1, so now the worker will
> > > continue
> > >
Btw, for debug I put
BUG_ON(atomic_read(&ht->nelems) < 0);
after the atomic_dec() in __rhashtable_remove_fast_one(). That makes
the kernel crash instantly on the buggy code, and I just have to run a
single test ("wpas_ctrl_interface_add_many") to get there.
johannes
On Mon, Sep 19, 2016 at 12:10:27PM +0200, Johannes Berg wrote:
> Btw, for debug I put
>
> BUG_ON(atomic_read(&ht->nelems) < 0);
>
> after the atomic_dec() in __rhashtable_remove_fast_one(). That makes
> the kernel crash instantly on the buggy code, and I just have to run a
> single test ("wpas_ct
From: Prameela Rani Garnepudi
Signed-off-by: Prameela Rani Garnepudi
---
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index dbb2389..dc64532
On Mon, 2016-09-19 at 18:48 +0800, Herbert Xu wrote:
> On Mon, Sep 19, 2016 at 12:10:27PM +0200, Johannes Berg wrote:
> >
> > Btw, for debug I put
> >
> > BUG_ON(atomic_read(&ht->nelems) < 0);
> >
> > after the atomic_dec() in __rhashtable_remove_fast_one(). That
> > makes
> > the kernel crash i
v3 fixes a bug in the remove path that causes the element count
to decrease when it shouldn't, leading to a gigantic hash table
when it underflows.
v2 contains a reworked insertion slowpath to ensure that the
spinlock for the table we're inserting into is taken.
This series contains two patches.
mac80211 currently uses rhashtable with insecure_elasticity set
to true. The latter is because of duplicate objects. What's
more, mac80211 walks the rhashtable chains by hand which is broken
as rhashtable may contain multiple tables due to resizing or
rehashing.
This patch fixes it by converting
The insecure_elasticity setting is an ugly wart brought out by
users who need to insert duplicate objects (that is, distinct
objects with identical keys) into the same table.
In fact, those users have a much bigger problem. Once those
duplicate objects are inserted, they don't have an interface t
On Mon, 2016-09-19 at 18:58 +0800, Herbert Xu wrote:
> v3 fixes a bug in the remove path that causes the element count
> to decrease when it shouldn't, leading to a gigantic hash table
> when it underflows.
>
Ok, with the BUG_ON() thrown in, this works in the test that was
failing before. I'll run
In the error paths in brcmf_flowring_add_tdls_peer() the allocated
resource should be freed.
Reviewed-by: Hante Meuleman
Reviewed-by: Pieter-Paul Giesberts
Signed-off-by: Arend van Spriel
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c | 8 ++--
1 file changed, 6 insertions
In case of an error the variable returned is uninitialized. The caller
will probably check the error code before using it, but better assure
it is set to zero.
Reviewed-by: Hante Meuleman
Reviewed-by: Pieter-Paul Giesberts
Signed-off-by: Arend van Spriel
---
drivers/net/wireless/broadcom/brcm8
From: Hante Meuleman
in the function brcmf_bus_start() in the exception handling a
check is made to dermine whether ifp is null, though this is not
possible. Removing the unnessary check.
Reviewed-by: Arend Van Spriel
Reviewed-by: Franky Lin
Reviewed-by: Pieter-Paul Giesberts
Signed-off-by: H
This series consist of:
* fixes for several issues found by Coverity.
* ignore 802.11d configuration if not supported in firmware.
* remove worker from netdev callback.
This is intended for 4.9 and applies to the master branch of
the wireless-drivers-next repository.
Arend van Spriel (4):
brcmf
From: Hante Meuleman
802.11d is not always supported by firmware anymore. Currently the
AP configuration of 11d will cause an abort if the ioctl set is
failing. This behavior is not correct and the error should be
ignored.
Reviewed-by: Arend Van Spriel
Reviewed-by: Franky Lin
Reviewed-by: Piet
As it turns out there is no need to use a worker for the callback
because it is not called from atomic context.
Reported-by: Dan Williams
Reviewed-by: Hante Meuleman
Reviewed-by: Pieter-Paul Giesberts
Reviewed-by: Franky Lin
Signed-off-by: Arend van Spriel
---
.../wireless/broadcom/brcm80211
From: Hante Meuleman
Clearing the wowl wakeindicator happens with a rather odd
construction where the string "clear" is used to set the iovar
wowl_wakeind. This was implemented incorrectly as it caused an
out of bound access. Use an intermediate variable of correct
length and copy string in that.
From: Hante Meuleman
When IPv6 address is to be cleared there is a possible out of
bound access. But also the clearing of the last entry and the
adjustment of total number of stored IPv6 addresses is not
updated. This patch fixes that bug. Bug was found using coverity.
Reviewed-by: Arend Van Spr
The variable info is assigned to point to bcdc->msg[1], which is the
same as pointing to bcdc->buf. As that is what we want to access
make it clear by fixing the assignment. This also avoid out-of-bounds
errors from static analyzers are bcdc->msg[1] is not in the structure
definition.
Reviewed-by:
From: Hante Meuleman
The 802.11 standard only has four valid auth type configurations of which
our firmware only supports two, ie. Open System and Shared Key. Simplify
the mapping falling back to automatic for other types specified by
user-space.
Reviewed-by: Arend Van Spriel
Reviewed-by: Frank
On 19 September 2016 at 00:52, Steffen Arntz wrote:
> Hi at all,
>
> I have an QCA988X based card in my laptop and have some "issues" with
> it, that I was not experiencing with my previous ath9k based card.
>
> The main issue is, that after suspend to RAM the card seems to be
> "hung up" and only
On 16 September 2016 at 12:56, Matteo Grandi wrote:
> Hello all,
[...]
> [8.589474] ath10k_pci :07:00.0: qca988x hw2.0 (0x4100016c,
> 0x043222ff sub :) fw 10.2.4.70.54 fwapi 5 bdapi 1 htt-ver 2.1
> wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 features
> no-p2p,raw-mode
T
On Mon, 2016-09-19 at 13:03 +0200, Johannes Berg wrote:
> On Mon, 2016-09-19 at 18:58 +0800, Herbert Xu wrote:
> >
> > v3 fixes a bug in the remove path that causes the element count
> > to decrease when it shouldn't, leading to a gigantic hash table
> > when it underflows.
> >
> Ok, with the BUG
Hi all,
While using the wilc1000 driver with latest 4.8-rc7, I
have difficulties to open the device and actually use it as I have
this kernel Oops right after the loading of the firmware
(wilc1003_firmware.bin).
If I revert back the driver to its b9811891a9f60ca9c314dcab3244c65930c4cf37
state,
On Sat, Sep 17, 2016 at 3:29 PM, Kalle Valo wrote:
> Vidar Haarr writes:
>> sep. 17 11:38:36 edbpc kernel: WARNING: CPU: 0 PID: 1684 at
>> /home/kernel/COD/linux/drivers/net/wireless/ath/ath9k/beacon.c:642
>> ath9k_calculate_summary_state+0x135/0x390 [ath9k]
>
> Looks like exactly the same proble
On Mon, Sep 19, 2016 at 02:06:02PM +0200, Nicolas Ferre wrote:
> Hi all,
>
> While using the wilc1000 driver with latest 4.8-rc7, I
> have difficulties to open the device and actually use it as I have
> this kernel Oops right after the loading of the firmware
> (wilc1003_firmware.bin).
>
> If I
Hi,
I'm having connectivity issues with an Intel 8260 on a 2.5GHz network
when using 40Mhz. I'm getting errors like
Queue 2 stuck for 1 ms.
I've upgrade my system to the firmware version 21 (21.373438.0) and
Kernel 4.8.0-rc6 in hope that it fixes the issue and to be able to debug
the pro
On Fri, 2016-09-16 at 11:58 +0200, Arend Van Spriel wrote:
> On 15-9-2016 16:42, Dan Williams wrote:
> >
> > Hi,
> >
> > While refining NetworkManager's MAC address randomization behavior
> > we
> > came across two issues with brcmfmac:
> >
> > 1) when changing the MAC address, the driver schedu
On 09/19/2016 02:00 AM, Johannes Berg wrote:
Actually, can you apply the v2 (cfg80211: add bitrate for 20MHz MCS
9) of this? Systems guys confirmed they use MCS 9 @ 20MHz when LDPC
is enabled. Also confirmed bitrate should be ok.
I don't really understand that. How can the bitrate be "OK" whe
As soon as debugging is turned on, the logs are filled with messages
reporting the interrupt status. As this quantity is usually zero, this
output is not needed. In fact, there will be a report if the status is
not zero, thus the debug line in question could probably be deleted.
Rather than taking
On 09/19/2016 04:09 AM, Arend van Spriel wrote:
> This series consist of:
> * fixes for several issues found by Coverity.
> * ignore 802.11d configuration if not supported in firmware.
> * remove worker from netdev callback.
Thanks for doing this, can you also provide the coverity id when
relevant
On 09/19/2016 12:51 PM, Prameela Rani Garnepudi wrote:
> From: Prameela Rani Garnepudi
>
> Signed-off-by: Prameela Rani Garnepudi
> ---
> drivers/net/wireless/rsi/rsi_91x_mac80211.c | 10 ++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
Hi Johannes,
We are working on adding indoor location support to the wil6210 11ad driver.
This includes fine timing measurement (FTM) as well as something we call angle
of arrival (AOA) which measures azimuth and elevation.
Initially we implemented it internally using vendor commands but we woul
On 19-9-2016 16:48, Dan Williams wrote:
> On Fri, 2016-09-16 at 11:58 +0200, Arend Van Spriel wrote:
>> On 15-9-2016 16:42, Dan Williams wrote:
>>>
>>> Hi,
>>>
>>> While refining NetworkManager's MAC address randomization behavior
>>> we
>>> came across two issues with brcmfmac:
>>>
>>> 1) when cha
On 19-9-2016 19:31, Lior David wrote:
> Hi Johannes,
>
> We are working on adding indoor location support to the wil6210 11ad driver.
> This includes fine timing measurement (FTM) as well as something we call
> angle of arrival (AOA) which measures azimuth and elevation.
> Initially we impleme
> > However I did not see any comments or response on this
> > patch. Can you please update if you plan on eventually submitting
> > this patch?
>
> You can find several FTM related patches in backport-iwlwifi repo on
> kernel.org. See link to git log of nl80211.h there [1].
>
You can find thing
Hi, I happen to own a RTL8192EU WiFi dongle which is marked as untested
by the rtl8xxxu driver.
I'm on a linux from scratch system using kernel 4.7.3 and wpa_supplicant
2.5.
The dongle appears to connect and work fine, but after around 10 minutes
it deauthenticates and enters and endless loop of
On Sunday, September 18, 2016 6:44:08 PM CEST Greg KH wrote:
> On Sun, Sep 18, 2016 at 02:49:33PM +0200, Christian Lamparter wrote:
> > On Sunday, September 18, 2016 12:14:55 PM CEST Greg KH wrote:
> > > On Sun, Sep 18, 2016 at 10:54:18AM +0300, Kalle Valo wrote:
> > > > Greg KH writes:
> > > >
>
On 09/19/16 at 07:00pm, Herbert Xu wrote:
> The insecure_elasticity setting is an ugly wart brought out by
> users who need to insert duplicate objects (that is, distinct
> objects with identical keys) into the same table.
>
> In fact, those users have a much bigger problem. Once those
> duplicat
On Fri, Sep 09, 2016 at 08:47:34PM +0530, Amitkumar Karwar wrote:
> From: Xinming Hu
>
> This patch derives device tree node from pcie bus layer framework.
> Device tree bindings file has been renamed(marvell-sd8xxx.txt ->
> marvell-8xxx.txt) to accomodate PCIe changes.
>
> Signed-off-by: Xinmin
On Mon, Sep 19, 2016 at 11:16:21PM +0200, Thomas Graf wrote:
>
> Nice, I like how this simplifies users! Is this suitable for
> ILA as well?
Does it have duplicate objects and use inelastic_security? If so
then yes it should switch over to rhlist.
Cheers,
--
Email: Herbert Xu
Home Page: http://
It got broken by 0b8e3c4ca29fe2c0efd3d41a76e34a657b9f17a4
Signed-off-by: Nikolay Martynov
---
drivers/net/wireless/ath/ath10k/debug.c | 27 +--
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c
b/drivers/net/wireless/
Hi,
On Mon, Sep 19, 2016 at 5:00 PM, Volker Mische wrote:
> Hi,
>
> I'm having connectivity issues with an Intel 8260 on a 2.5GHz network
> when using 40Mhz. I'm getting errors like
>
> Queue 2 stuck for 1 ms.
>
> I've upgrade my system to the firmware version 21 (21.373438.0) and
> Kerne
1 - 100 of 104 matches
Mail list logo