Thanks Alot guys, this is something can do with thorough testings but my
client does not want to work on this colo anymore and i have no more access
of these servers :(.
Thanks,
Yousuf
On Wed, Jan 13, 2016 at 9:44 AM, Ugo Bellavance <u...@lubik.ca> wrote:
> On 16-01-11 01:23 AM, Muhamm
et cable.
>
> Also, if the Ethernet chipset is a Realtek, there is a bug in the FreeBSD
> driver that affects auto negotiation with some switch hardware.
>
> --cro
>
>
> > On Jan 11, 2016, at 05:40, Muhammad Yousuf Khan <sir...@gmail.com>
> wrote:
> >
> >
s.
> also: check with ifconfig 'interface name' for crc errors, and the
> advertised speeds, paste here the full output of the problematic interface.
>
>
> let us know how it goes.
>
>
> 2016-01-11 3:23 GMT-03:00 Muhammad Yousuf Khan <sir...@gmail.com>:
>
> > I
I am remotely supporting one of my client who is using pfsense. i have
been using pfsense for years and never face such issue in this
experience, the Client Co-location is recommending to use 100BaseTX full
duplex setting instead of Auto. i do not know why they required that since
i am not in US
I am using ver 2.1.3. Thanks Walter now i can see the IP actually at first
i was checking WAN since i switched to LAN it showed me the IP that i want.
and i also like to thank Espen for giving some tips on CLI option i was
using these CAPITAL Alphabets but i didn't used them in interface mode.
hi guys actually i want to check which IP is using most of the internet
traffic. i see pftop a bit confusing i tried changing sorting via o but
it is still confusing me . can you guys please guide me how can i viiew
live monitoring. what i want to check is which one host is eating up the
whole
oliver.han...@gmail.com
wrote:
Status - Traffic Graph is where I usually look in the GUI.
On Sep 24, 2014 7:25 AM, Muhammad Yousuf Khan sir...@gmail.com wrote:
hi guys actually i want to check which IP is using most of the internet
traffic. i see pftop a bit confusing i tried changing sorting
when i sort by RATE or Speed it shows a suspected ip on the top
but when i close the download on that host/client it always shows on top.
i need a tool like NTOP work on CLI and shows same output as Linux Terminal
console.
Thanks,
MYK
On Wed, Sep 24, 2014 at 7:55 PM, Muhammad Yousuf Khan sir
i have been working on Pfsense for few years its a best firewall tool that
i have worked with.
Now i want assign quota to every IP behind the firewall.
let say i have a static quota of 10 GB . now i want to assign 10 GB each
client ip.
for example.
192.168.1.10 = 10GB limit
192.168.1.11 = 10GB
Hello all,
I have created a queue with wizard and i am bit confuse need you help to
understand the rule. the NAT rule says port any any on UDP protocol. now
the confusion is all the softwares use UDP are going to have priority
Bandwidth? how come pfsense classify the traffic if the packet is from
i am trying to block skype logging with the signature number 5999 and 6001
as describe in few howtos.
i added all p2p rules for skype. but the main signaure with sid 6001 is
missing. i can not see that signature in the list.
however i can see 5999 and few others related to skype which are not
i am using two instance one on port 1194 and one on 1196
1194 is preshared for dd-wrt working fine.tunnel subnet is 10.3.3.0/24.
1196 is remote acess for road warriers.tunnel subnet is 10.4.4.0/24
i want both my VPN segments to use my headoffice LAN and can also connect
to each other as hub and
of it and why NAT
is required for certain things to work, but this was the only way I could
get it to work in my setup. Of course, I'd like to be educated if
someone has an answer.
Bryan D.
http://www.derman.com/
On 2014-Feb-26, at 11:41 AM, Muhammad Yousuf Khan sir...@gmail.com
wrote:
i am
but as bryan says i also see NAT solution in pfsense docs. however my
confusion still remains the same. referring to the pfsense doc why we need
NAT ?when routing is the way for this any technical reason.
On Thu, Feb 27, 2014 at 1:42 AM, Muhammad Yousuf Khan sir...@gmail.comwrote:
Thanks
i am trying to work on a lab for auto failover however i just want to test
manual failover.
when i change the default gateway by editing routers tab it changes the
default gateway.
but i can not access the internet.
i enable allow default gateway switching option but now i can not even
come back
be a problem?
Thanks
Myk
On Tue, Feb 25, 2014 at 7:06 PM, Muhammad Yousuf Khan sir...@gmail.comwrote:
i am trying to work on a lab for auto failover however i just want to test
manual failover.
when i change the default gateway by editing routers tab it changes the
default gateway.
but i can
ok resolved, i didnt selected the default gateway in interface gui. and
just created a gateway route. one i selected the route in OPT1 interface.
things starts to works as expected.
Thanks.
On Tue, Feb 25, 2014 at 7:34 PM, Muhammad Yousuf Khan sir...@gmail.comwrote:
guys, is there any howto
Thanks Jim,
i think i messed up the firewall, therefore i reinstalled the firewall. and
testing it again to see whether things are working properly or not.
Thanks
On Fri, Feb 21, 2014 at 7:37 PM, Jim Pingle li...@pingle.org wrote:
On 2/21/2014 2:24 AM, Muhammad Yousuf Khan wrote:
however
I am using the latest build
*2.1-RELEASE * (amd64)
built on Wed Sep 11 18:17:48 EDT 2013
however the problem is when i create a VPN server other then 1194 my VPN
server does not work.
must current VPN server is listening on port 1199 on tcp port i tried
changing it to udp but nothing help.
Hello all,
I am Newbie, my pfsense is behind the ISP router, having a private ip of
192.x.x.x
i can ping via ssh and via web console both i can also check dnslookup from
console and ssh they are working fine. however when i click on available
packages. i see this
Unable to communicate with
://ca.linkedin.com/in/davejwarren
On 2014-02-13 12:03, Muhammad Yousuf Khan wrote:
Yes i can ping, here is the result from web console Diagnosticsping
Ping output:
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=40 time=293.328 ms
64 bytes from 8.8.8.8: icmp_seq=1
21 matches
Mail list logo