Dear Sir,
At present temporary i moved to Endian firewall 3.0 for https proxy its
works good.
Thanks
A Mohan Rao
___
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailman/listinfo/list
Hello,
>>Jason M. wrote:
>>I'm using the PFW201 hardware from Tranquilnet
>
> According to Tranquilnet:
>
> " *Note: These units may run hot to the touch and we recommend eith a wall
> mount or to place them on a cool, dry and hard surface with proper air
> flow"
>
> I can build systems that are mu
Oh I've got it: lack of default route on 192.168.yyy.40
Just how HTTP was working is still a mystery though.
Apologies for the noise!
-Original Message-
From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of Chris
Murray
Sent: 10 August 2014 21:08
To: pfSense Support and Discuss
Hi all
I have just installed PFSENSE in my one of the old box
installation works perfectly
my achievements are
i got one of the Ethernet port and one of o2 dongle to connect internet
i configured to my box back to back cable ethernet
i try to connect o2 it says ppp0 up
i do not see any IP add
Just one more issue now which has me puzzled and I'm hoping someone has
some ideas? It appears to be working for some hosts but not others?
I have a machine 192.168.yyy.60, which I can ping & SSH to from the
192.168.xxx.0 network.
I have a machine 192.168.yyy.40, which listens on port 80. I can ac
They don't now, but the process of reassignment suggested that they did,
and that one of them was down. i.e. the "Valid interfaces are:" list
wasn't right. It's now correct though, thanks for that.
-Original Message-
From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of compdoc
S
You wrote "I did correct the MAC address for OPT1," , please note that
it is normally not needed to configure the MAC addresses of networkcards
inside the pfSense webgui. (only sometimes if you want to avoid some ISP
arp-cache update issue when changing hardware) make sure to remove that
settin
>em1 third MAC address (up) <-- shouldn't that be the second MAC address?
Are you saying two interfaces have the same mac address even after
reassignment? That's not right.
___
List mailing list
List@lists.pfsense.org
https://lists.pfsense.org/mailm
Oh that's odd, they were mixed-up on the console screen and on the
option to reassign interfaces.
I'd expect em0 em1 and em2 to be enumerated same order as the virtual
interfaces presented to the VM, but when reassigning, they were like
this:
em0 first MAC address (up)
em1 third MA
> OPT1 interface - actually has the VM's WAN MAC address (the second
interface rather than the third interface)
If you haven't yet, you might want to reassign interfaces on the console
login screen. The Option is number (1) in the list.
Then reboot.
>Jason M. wrote:
>I'm using the PFW201 hardware from Tranquilnet
According to Tranquilnet:
" *Note: These units may run hot to the touch and we recommend eith a wall
mount or to place them on a cool, dry and hard surface with proper air flow"
I can build systems that are much faster and more pow
Hi all,
I'm having some confusion with my OPT1 interface. I've found quite a few
questions around OPT1 routing, with various solutions too, however none
of them seem to be applicable to me. I may be misunderstanding something
basic, so please bear with me.
I had pfSense inside KVM, with two virtu
12 matches
Mail list logo