we have 3 different servers running P4 3.2 GHz with 2 GB ram, sata2 160 GB
Harddisks
( 3 different labs of 20 clients, each ) clients are P1 166 with 64MB ram.
the clients run KDE with Opera (or Firefox 2) and Open Office
2.0.4beautifully :-)
we bought them a year and a half ago, so i guess we
On 07/12/06, Eilert [EMAIL PROTECTED] wrote:
Looking for this entry in the Wiki, but didn't find it - can you give me
a hint what I've got to look for?
Look at running two dhcpd ltsp boxes on the same network. When the
client machine is witched on the server which replies first gets the
client
Follow on post:
To setup a failover DHCPD + LTSP servers plan that Server1 should have
IP of 192.168.0.254 and Server2 192.168.0.253. Setup both servers for
LTSP as usual using these IP's. Now copy the files given below for
Master and Slave servers in place of /etc/dhcpd.conf on both servers
Follow on:
Please note that in the configuration for the primary server we put in
an option for split=128 which is commented out an just below it is a
hash declaration. Hashes allow for more fine tuning as to how the
actual load may be split up. If the servers
are nearly identical, chose a 50/50
the minimum requirement depends that of you use in the clients ...
just to you have an ideia...
I have a Pentuim D 930 3.0 GHZ with 2GB of RAM and HD sata2 of 250 GB ...
the clients use math sotfwares (kile,scribus,geogebra...), firefox,g++ to
compile little prograns, ..into the kde ...
the
Hi all,
You can run two dhcp servers in the same network for two different LTSP
servers.You can run dhcp for Ist server after binding the MAC address of
thin clients and deny unknown clients. For second server' dhcp, you have to
deny booting for the mac address which has been bind in Ist
Dear Expert,
I need your suggestion about server hardware minimum requirement.
I would like to use LTSP for about 20 clients.
What is the minimum requirement for the server?
If I would like to use 2 LTSP Servers, how to setup it?
Thanks in advance.
--
Best Regards,
Donny Christiaan.
[EMAIL
I forgot something.
Fyi, my office has 2 floors and I planed to use 2 LTSP servers for each
floor.
I used 1 network 192.168.0.x/24 .. can I implement this 2 LTSP ?
what about the DHCP Server ?
Original Message
Subject: Minimum Requirement for 20 Clients
Date: Thu, 07 Dec 2006
On 07/12/06, Donny Christiaan [EMAIL PROTECTED] wrote:
Fyi, my office has 2 floors and I planed to use 2 LTSP servers for each
floor.
This is more of physical layout issue than networki or system issue.
I used 1 network 192.168.0.x/24 .. can I implement this 2 LTSP ?
what about the DHCP
Hi Sudev,
Thanks for your reply.
Sudev Barar wrote:
I used 1 network 192.168.0.x/24 .. can I implement this 2 LTSP ?
what about the DHCP Server ?
[SNIP]
I need your suggestion about server hardware minimum requirement.
I would like to use LTSP for about 20 clients.
What is the minimum
Sudev Barar schrieb:
On 07/12/06, Donny Christiaan [EMAIL PROTECTED] wrote:
Fyi, my office has 2 floors and I planed to use 2 LTSP servers for each
floor.
This is more of physical layout issue than networki or system issue.
I used 1 network 192.168.0.x/24 .. can I implement this 2 LTSP
11 matches
Mail list logo
