"Stefano" == Stefano Ghirlanda [EMAIL PROTECTED] writes:
Stefano Hi,
Stefano On the other hand, I have to say in my defense that I was
Stefano following the User's Guide. I do not know if this has been
Stefano updated in the pre1 series, still using .12.
I think this has been fixed now.
"Rick" == Rick Angell [EMAIL PROTECTED] writes:
Rick I am having some difficulty quoting code segments in a Lyx
Rick document and having indentation appear as desired.
Rick This is an example of what I'm trying to do:
Rick last_day_of_week = 1; % first element is a Friday
Rick
"Shane" == Shane French [EMAIL PROTECTED] writes:
Shane I've been subscribed to this list for a while but this is my
Shane first post. I downloaded the file vita.cls but can't find what
Shane to do with it now.
Shane Could someone tell me where to look in the help system or
Shane explain to
"William" == William Pickles [EMAIL PROTECTED] writes:
William I asked a few weeks ago about using the LyxServer mechanism
William but did nt get any help from this group
Sorry about that... The situation now is that LyX cannot be started
without a GUI, so that the lyxserver cannot help much.
"ivo" == ivo [EMAIL PROTECTED] writes:
ivo In Lyx rel 0.12.0 I can't get Croatian letters ð (\dj, d-slash)
ivo and Ð (\DJ, D-slash), (they were always a problem, but in 0.10.7
ivo I used \kmap ð "\\dj" and \kmap Ð "\\DJ", to get them like TeX
ivo commands in Lyx -they were painted red - and
"Matthew" == =?iso-8859-2?Q?Mat=ECj Cepl?= iso-8859-2 writes:
Matthew Well, I am afraid, that the main issue is support of ISO
Matthew 8859-2 coding. There is nothing good in ISO 8859-1 coding in
Matthew East Europe.
I thought that LyX had a reasonable latin2 support? What's the
problem,
"Paul" == Paul L Lussier [EMAIL PROTECTED] writes:
Paul Hi all,
Paul Is there a quick way of taking a .lyx file and "exporting" to
Paul ascii using a command line utility? I needed to do this other
Paul day, and though that it would have been great if I didn't need
Paul to launch lyx to do
"Jose" == Jose L Gomez Dans [EMAIL PROTECTED] writes:
Jose Hi! I am using both klyx and lyx to write my thesis, and I am
Jose running into trouble importing pstex files. Basically, I do my
Jose drawings in xfig, and then import them into K/Lyx as included
Jose files. When I look at the
"Ronald" == Ronald Florence [EMAIL PROTECTED] writes:
Ronald While we're on extended alphabets, for transliterated Hebrew
Ronald and Yiddish I'd welcome help configuring a Solaris-Sparc
Ronald system to create underdot letters in LyX with the compose
Ronald key. I can do them by setting up a
"Myriam" == Myriam M Abramson [EMAIL PROTECTED] writes:
Myriam Hi!
Myriam I am a little bit confused about the previous post on
Myriam including pstex files from Xfig. Why is that done? Why not
Myriam including eps files as figures? I don't recall any problems
Myriam with text in Xfig.
"Frederic" == Frederic Leymarie [EMAIL PROTECTED] writes:
Frederic Hi I have an error mesg. for an lyx file which suddenly
Frederic appears (that very same file was fine before today), when I
Frederic run "view dvi".
Frederic I get the following errors about "babel.sty" not being found
"Frank" == Frank Mahler [EMAIL PROTECTED] writes:
Frank Hi there! I'd like to use the amsart equation numbering scheme
Frank in standard documents with article layout, so that the current
Frank section number is prepended the equation number. Each section
Frank should then start with equation
"Frank" == Frank Mahler [EMAIL PROTECTED] writes:
Frank Great! It works!
Frank Thanks a lot...
You're welcome.
Frank (BTW: Is this a FAQ? And if, is there a maintained, speak:
Frank current version of a LyX-FAQ?)
I don't know whether this is a FAQ, all I remember is that I already
answered
"Stefano" == Stefano Ghirlanda [EMAIL PROTECTED] writes:
Stefano Hi, I have had a number of crashes this afternoon. All
Stefano happened when hitting Ctrl-X or Ctrl-C to cut or copy text,
Stefano or math insets. I cannot reproduce the crash condition
Stefano easily, but Lyx crashed at least 4
"Panagiotis" == Panagiotis Melas [EMAIL PROTECTED] writes:
Panagiotis http://www.loria.fr/services/tex/ (in french mostly)
Nope. You will find english at
http://www.loria.fr/services/tex/english/index.html
and german at
http://www.loria.fr/services/tex/german/index.html
Check them out.
"Frederic" == Frederic Leymarie [EMAIL PROTECTED] writes:
Frederic Norbert Stribeck wrote:
problems converting LaTex files and would like the manuscript in
[MS] Word 6.0 or other microcomputer word processor.
Frederic What about the following:
Frederic latex2html -- HTML version
"Stefano" == Stefano Ghirlanda [EMAIL PROTECTED] writes:
Stefano Hi Jean-Marc, I know that I did not give very much info, just
Stefano want to know if these "random" cut/copy crashes ever happened
Stefano to anyone.
Well, there is at least one identified problem with cutting in
mathed which
"Bernd" == Bernd Kuemmerlen [EMAIL PROTECTED] writes:
Bernd Hi there, first of all sorry for not posting this to the
Bernd developers list. But since some developers are reading here as
Bernd well and the traffic isn't very high I though I could try...
Bernd I have a problem compiling
"Matthias" == Matthias Zenker [EMAIL PROTECTED] writes:
Matthias Should
Matthias I upgrade my 0.12.0 before (it works well in principle, but
Matthias has some annoying problems, e.g. the "lost
Matthias gs-processes"-bug), or are there no significant enhancements
Matthias in stability in
"Matthias" == Matthias Zenker [EMAIL PROTECTED] writes:
Matthias OK, so your advice is to grab 1.0.0pre2 now instead of
Matthias waiting one more week ? (There is no 1.0.0pre3 at the
Matthias moment, is there ? Because if I take literally what you
Matthias wrote above, ...)
1.0.0pre3 is what
"Yao-Pin" == Yao-Pin Kuo [EMAIL PROTECTED] writes:
Yao-Pin Hi How can I type cubic root or n-th root in LyX?
Unfortunately you can't. The only solution I can think about is to
define in the preamble
\newcommand{\cubroot}{#1}{\sqrt[3]{#1}}
and enter manually
\cubroot{
in the math editor. The
"Wolfgang" == Wolfgang Cohrs [EMAIL PROTECTED] writes:
Wolfgang Hi, i get this message
Wolfgang CC -c -g -I. -I. -I../images -I/usr/openwin/include
Wolfgang math_macro.C "math_macro.C", line 160: Error: Overloading
Wolfgang ambiguity between "operator+(const LString, const long)"
Wolfgang and
"Christopher" == Christopher Sawtell [EMAIL PROTECTED] writes:
Christopher Greetings to every one, I have just installed Debian 2.0
Christopher and recompiled LyX. The compilation went smoothly, no
Christopher problems whatever. However I get a SIGSEGV on starting
Christopher the new binary.
"Frederic" == Frederic Leymarie [EMAIL PROTECTED] writes:
Frederic Jean-Marc Lasgouttes wrote:
"Yao-Pin" == Yao-Pin Kuo [EMAIL PROTECTED] writes:
Yao-Pin Hi How can I type cubic root or n-th root in LyX?
Unfortunately you can't. The only solution I can think
"Wolfgang" == Wolfgang Cohrs [EMAIL PROTECTED] writes:
Wolfgang Hi Jean, thankyou for your support. now lyx works fine.
Fine. I'll commit the change then.
JMarc
--
+++ the lyx project user mailing list +++
To unsubscribe from this list send mail to
"Jitse" == Jitse Niesen [EMAIL PROTECTED] writes:
Jitse I believe the problem is the empty line before the
Jitse \begin{equation}.
Indeed.
Jitse So, my questions are: * Am I doing something wrong or is it a
Jitse bug in LyX? * In the latter case, can I circumvent the bug?
Jitse The only way
"Wolfgang" == Wolfgang Cohrs [EMAIL PROTECTED] writes:
Wolfgang for i in lyxrc.defaults doc/LaTeXConfig.lyx textclass.lst
Wolfgang packages.lst ; do \ ../config/install-sh -c -m 644 $i
Wolfgang /tmpdir/lyx/share/lyx/$i ; \ done; config/install-sh -c -m
Wolfgang 644 ./lyx.man \
"Wolfgang" == Wolfgang Cohrs [EMAIL PROTECTED] writes:
Wolfgang Hi Jean-Marc, after i have logout from my computer and have
Wolfgang login. i run configure, make and make install. and now lyx
Wolfgang works :-) . i think that my system was confusion.
Good.
Wolfgang thankyou for support an a
"Mukund" == Mukund T Vengalattore [EMAIL PROTECTED] writes:
Mukund Hi, I have a problem installing lyx-0.12.0. when I do
Mukund ./configure, I get the error message, '..., checking for a
Mukund working C++ compiler... configure: error: Unable to find a
Mukund working C++ compiler'. The
"Klaus" == Klaus Kragelund [EMAIL PROTECTED] writes:
Klaus Hi I hope this is not a too trivial question:
Of course not, and I guess this is why you did not get an answer yet :)
Klaus I have a footnote that is more than one line long and I would
Klaus like to have the lines stay exactly under
"Mike" == Mike Heffner [EMAIL PROTECTED] writes:
Mike Hello, I am possibly a new user of Lyx. I have just downloaded
Mike lyx version 0.12.0. Most of it seems to work, but it is having
Mike problem with .eps files when it has latex compile to document.
Mike The errors show up when I compile
"Jianxin" == Jianxin Yuan [EMAIL PROTECTED] writes:
Jianxin I believe many of our lyx users experienced the similar
Jianxin things as well. Could LyX display these paragraph breaks by
Jianxin some marks as done by Word? so we can exactly know when
Jianxin something goes wrong. A wish list :-)
"Hilaire" == Hilaire Fernandes [EMAIL PROTECTED] writes:
Hilaire I installed lyx-0.12.0-linux-elf-x86-libc5-bin.tar.gz on Red
Hilaire Hat 5.1 Executing Lyx gave me : ./lyx: can't resolve symbol
Hilaire '__argz_stringify'
Hello,
Try the newer version in
ftp://moni.msci.memphis.edu/pub/
[It
"Mike" == Mike Heffner [EMAIL PROTECTED] writes:
Mike Hello JMarc, Thank you for your fast reply. Your suggestion
Mike fixed most of the errors that I was having. There is one more
Mike error left. It seems to have something to with fonts. The
Mike error is:
Mike ! Font U/msa/m/n/10-msam10
"Francesco" == Francesco Lamonica [EMAIL PROTECTED] writes:
Francesco btw, have you removed the config.cache file, before of
Francesco re-running ./configure?
LyX's configure takes care of removing config.cache when such an error
is reported.
Francesco also, sometimes configure search for
"Jean-Pierre" == Jean-Pierre Chretien [EMAIL PROTECTED] writes:
btw, have you removed the config.cache file, before of re-running
Jean-Pierre ./configure?
Jean-Pierre A make clean is even better I think, you really restart
Jean-Pierre from scratch.
'make clean' does not remove config.cache
"Ignacio" == Ignacio Ramos [EMAIL PROTECTED] writes:
Ignacio Hello to all users of Lyx! I would like to know, who to put
Ignacio out the date of print that always appear at first page.
To remove this date, add a `Date' paragraph with an empty content (for
example, a protected space). LaTeX
"Bill" == Bill Simpson [EMAIL PROTECTED] writes:
Things would be easier if people noticed that there is a Readme
file in xforms distribution which explains that a 'make install'
will do all for you.
Bill I did the make install for xforms. I read the Readme, it was
Bill not helpful in
"Bill" == Bill Simpson [EMAIL PROTECTED] writes:
Bill JMarc, as I said before I have it working now. I just copied
Bill over one file from an old installation (libforms.so). I don't
Bill know what went wrong, but all is well now. Yes I have
Bill linux. Thanks.
OK, it seems that I am showing
"Robert" == Robert J Sprawls [EMAIL PROTECTED] writes:
Robert Hello, I'm using LyX v1.0.0pre2.
Hello,
Contrary to what you might have thought, an answer to your message is
finally coming ;)
Robert I'm finding when I include a text file that is located
Robert in the same directory as
"Joerg" == Joerg Zieren [EMAIL PROTECTED] writes:
Joerg Guess this is rather a LaTeX-related question... I don't want
Joerg to have LaTeX break (hyphenate? (sp?)) words for me, like "Lin-
Joerg ux". Where can this be turned off? Do I have to enter some
Joerg mysterious (to me :-) LaTeX
"Kaare" == Kaare Rasmussen [EMAIL PROTECTED] writes:
Kaare This is really anoying: According to man latin1 the symbol for
Kaare one half (½ - or 1/2 if it doesn't show up correcly on your
Kaare screen) is decimal 189. As I'm using latin1 encoding I try to
Kaare insert it with \symbol{189} but I
"Administrator" == Administrator [EMAIL PROTECTED] writes:
Administrator Hi, I got the lastest lyx archive (lyx-current.tar.gz)
Administrator from the server, untarred it and tried to install it
Administrator with ./configure in the lyx-0.12.0 directory. Answer
Administrator was:
[...]
"Niki" == Niki Afshartous [EMAIL PROTECTED] writes:
Niki Hi,
Niki I haven't been keeping up with the LyX versions (still using
Niki 12.1pre5). Since I'm ready to submit my thesis which uses the
Niki AMS-book class, I'd like to ask if there would be any visible
Niki benefits in
"Reuben" == Reuben Thomas [EMAIL PROTECTED] writes:
Reuben I have a LyX document which includes appendices with LaTeX
Reuben commands (so that I don't get problems with the fact that
Reuben these are fully-fledged LyX documents). I want to make
Reuben cross-references to these appendices; do I
"kimmo" == kimmo [EMAIL PROTECTED] writes:
kimmo Well, I'm inquiring if the same effect happens in the LyX
kimmo 1.0.0preN versions as now happens in version 0.12.
kimmo When I'm writing a book with a separate reference
kimmo (bibliography) section in the end of each chapter the chapter
kimmo
"Thomas" == Thomas Stroese [EMAIL PROTECTED] writes:
Thomas Hello Lyx-Users! Please, is there a possibility in lyx or in
Thomas latex type typeset formulas like that: K[X]/ ^ / (X-k) = K
Thomas which ist often used in Algebra ("K[X] modulo Ideal
Thomas (X-k)"). The right side should be
"Ignacio" == Ignacio Ramos [EMAIL PROTECTED] writes:
Ignacio Hello to all users of lyx! I would like to know how can I
Ignacio make to get no line at the top of the first page when I say
Ignacio to lyx thispagestyle=fancy. I want the bottom page with style
Ignacio fancy.
You can try to add
"Thomas" == Thomas Stroese [EMAIL PROTECTED] writes:
Thomas Hello Jean-Marc! Thanks for your answer. Your tip is nearly
Thomas that what i want. The font should be italic like the other
Thomas letters in math editor and it should keep its original size
Thomas (or that size, which is usually
Hello,
Since our fearless leader Lars is not here to make new prereleases of
LyX for everybody's consumption, I decided to make a snapshot of the
current cvs repository available from my own WWW space. It can be
found at
http://www-rocq.inria.fr/~lasgoutt/lyx/lyx-1.0.0pre7-990107.tar.gz
or
"Reuben" == Reuben Thomas [EMAIL PROTECTED] writes:
Reuben ...more out of interest than anything else: why is my LyX
Reuben 1.0.0pre6 binary 800Kb bigger than pre2? I've checked obvious
Reuben things like it not being stripped (they both are), and they're
Reuben both linked to the same set of
"Carl" == Carl Ollivier-Gooch [EMAIL PROTECTED] writes:
Carl On 07-Jan-99 Jean-Marc Lasgouttes wrote:
Carl I have one complaint:
- Protected spaces are output as plain spaces in LaTeX code (Edmar)
Carl This is IMO incorrect. One use of protected spaces is to ensure
Carl that &quo
"Jitse" == Jitse Niesen [EMAIL PROTECTED] writes:
Jitse Is it possible to change the float placement optins for a
Jitse single float in LyX? I know about the box in the
Jitse Layout|Document menu, but I want to tune the placement of a
Jitse particular float.
It is not possible currently.
"Niki" == Niki Afshartous [EMAIL PROTECTED] writes:
Niki Niki In the document (attached below) the spacing between the
Niki Niki equations is bigger than the spacing between the
Niki equations and Niki the text. Is there any way to make the
Niki spacing look more Niki consistent ?
"Tony" == Tony Greenwood - ext 4668 [EMAIL PROTECTED] writes:
Jean-Marc It appears that any two consecutive displayed formulas
end Jean-Marc up being separated by a \n\n, thus creating an
extraneous Jean-Marc paragraph break. This causes the extra
space seen by Niki.
Can you think of
"Joerg" == Joerg Zieren [EMAIL PROTECTED] writes:
Joerg Jean-Marc.Lasgouttes wrote: Guess this is rather a
Joerg LaTeX-related question... I don't want to have LaTeX break
Joerg (hyphenate? (sp?)) words for me, like "Lin- ux". Where can this
Joerg be turned off? Do I have to enter some
"Florian" == Florian Cramer [EMAIL PROTECTED] writes:
Florian However, I use none of them in my "opening" line, and neither
Florian can I find any in the LaTeX source code exported from LyX
Florian (see below).
Florian Could this be a LyX bug?
This is a weakness in LyX letter support, which
"Markus" == Markus Baeurle [EMAIL PROTECTED] writes:
Markus The second
Markus one has to do with page layout. I chose the fancy layout in
Markus Layout - Document. As you probably know, it puts the chapter
Markus heading on the left and the section heading on the right of
Markus the top of each
"Niki" == Niki Afshartous [EMAIL PROTECTED] writes:
Niki Hi,
Niki Thanks for any help with these questions:
Niki - How to enlarge the font size of bibliography entries ?
Are these manual entries or bibtex generated ones?
Niki - How to create manual entries in the table of contents
Niki
"wollmann" == wollmann [EMAIL PROTECTED] writes:
wollmann Hi everybody! I'm trying to import a figure created within
wollmann xfig following the instructions in the userguide. I need
wollmann formulas in the figure so i decided to export
wollmann postscript/latex combined. Then I created the
"Nabil" == Nabil Hathout [EMAIL PROTECTED] writes:
Nabil Hello, is there a mean to replace latex-style protected blanks
Nabil "\ " with lyx ones ? findreplace does not seem able to do it.
It is not easily possible (other than by modifying directly the .lyx
file). BTW, '\ ' is not really a
"Wolfgang" == Wolfgang Engelmann [EMAIL PROTECTED] writes:
Wolfgang Is something like Chemwindow or mdl-isis for drawing
Wolfgang chemical structures available under tex/latex?
A quick search on (La)TeX navigator shows that this file exists and is
called... chemtex! You'll find it on CTAN in
"Reuben" == Reuben Thomas [EMAIL PROTECTED] writes:
Wolfgang Is something like Chemwindow or mdl-isis for drawing
Wolfgang chemical structures available under tex/latex?
Reuben A quick look in the LaTeX Graphics Companion reveals two
Reuben packages which seem to be modern and capable: XYMTeX
"HoneyBunny" == HoneyBunny [EMAIL PROTECTED] writes:
HoneyBunny Maybe someone can help. Tanks in advance.
HoneyBunny I'm working on a SQL Reference pocket guide using the
HoneyBunny syntax macro package of Mark Wooding. Attached is a tex
HoneyBunny file. One command, ALTER DATABASE, has a
"Thomas" == Thomas Stroese [EMAIL PROTECTED] writes:
Thomas Hello Lyx-Users! Sorry for that question again:
Thomas I have to write german documents on an american keyboard and
Thomas would like to make the singe-quote a deadkey, which produces
Thomas 'a - \"a (in Latex,i.e. umlaut a) 'A -
"Dominic" == Dominic Barraclough [EMAIL PROTECTED] writes:
Dominic I finally able to install lyx v 0.12.0.beta last night after
Dominic some fighting with the xforms. However, when I tried to use
Dominic lyx I found that if I place the mouse cursor over the lyx
Dominic window my text area would
"Reuben" == Reuben Thomas [EMAIL PROTECTED] writes:
Reuben I like the new european keymap and I have LyX set up with
Reuben european on keymap 1 and greek on keymap 2. But I'd like it to
Reuben default to no keymap. Is there a way of doing this?
You can probably set \use_kmap to false in
"Kaare" == Kaare Rasmussen [EMAIL PROTECTED] writes:
Kaare How can I change the spacing between characters in just one
Kaare paragraph (or for a character choice)?
Kaare I need to add a little space between the letters in a section
Kaare header. Is it possible?
This is not possible directly
"Thierry" == Thierry Michalowski [EMAIL PROTECTED] writes:
Thierry Well, I should try to answer to that. Actually, I think
Thierry -should be corrected by someone if I'm wrong, I'm currently
Thierry working withe the 0.12 version of Lyx - that there is no
Thierry relashionship between Lyx and
"Paul" == Paul L Lussier [EMAIL PROTECTED] writes:
Paul Does KLyX work without KDE? I currently jump between Solaris
Paul and Linux, and really like having identical environments on the
Paul different platforms. Switching to KDE isn't really an option
Paul for the Solaris environment, so if
"Roger" == Roger Williams [EMAIL PROTECTED] writes:
Roger If you *had* tried it, you would discovered that each instance
Roger of LyX uses a private paste buffer, so you can't use X
Roger clipboard functions to copy between them. Or were you
Roger suggesting to the development team that this
"Ralph" == Ralph Clark [EMAIL PROTECTED] writes:
Ralph I'm peripherally involved in a co-operative effort to get a new
Ralph UK Linux magazine launched. Since the progenitor of this has
Ralph asked for contributions to be submitted in LaTeX format I am
Ralph advocating that contributors should
"John" == John Drake [EMAIL PROTECTED] writes:
John So my questions are :
John 1) How do I configure LaTeX to be able to handle a LyX file?
LaTeX cannot handle LyX files, but LyX exports latex files. In fact,
if you do File-Update_DVI, LyX will output a latex file, run latex
and show yu the
"Michael" == Michael Hanke [EMAIL PROTECTED] writes:
Michael Please could you be a little more specific? I am using
Michael barracuda as well as bibview. But i do not know how I can
Michael manage to communicate with LyX. Thank you.
The patch for barracuda has been written by Alejandro. There
"Etienne" == Etienne Grossmann [EMAIL PROTECTED] writes:
Etienne Hello,
the only thing I can´t do (possibly that´s my fault!? ) is "open a
file". The only thing I can do is to open the dialog File
Open. There is no parameter for the file name. So, what can I do?
Etienne Sending
"Sven" == Sven Gustke [EMAIL PROTECTED] writes:
Sven Hi out there! I´m working with the lyx-server very well. It is
Sven a wonderfull thing. But the only thing I can´t do (possibly
Sven that´s my fault!? ) is "open a file". The only thing I can do is
Sven to open the dialog File Open. There is
"Florian" == Florian Cramer [EMAIL PROTECTED] writes:
Florian Am Fri, 22.Jan.1999 um 09:15:15 +0100 schrieb Jean-Marc
Florian Lasgouttes:
The patch for barracuda has been written by Alejandro. There is
also a
Florian Do you have a download URL at hand?
Try http://barracuda.linuxbox.com/
"Joerg" == Joerg Zieren [EMAIL PROTECTED] writes:
Joerg ron wrote:
Some features I'd like to see in LyX search and replace:
Joerg [...]
Joerg Talking about the search function: I don't remember if it was
Joerg with pre2 or pre7 that footnotes and margin notes were not
Joerg searched unless
"Florian" == Florian Cramer [EMAIL PROTECTED] writes:
Florian Am Sat, 23.Jan.1999 um 10:50:22 -0500 schrieb Ronald
Florian Florence:
Some features I'd like to see in LyX search and replace:
- regular expressions;
- search multiple files, like all of the chapters of a book
project;
-
"Jeff" == Jeff Breidenbach [EMAIL PROTECTED] writes:
Jeff So, I tried 1.0.0pre8 for the first time. It autoconfigured and
Jeff compiled beautifully. It ran beautifully and was intuitive and
Jeff simple. It was easy for me to bang out a document, even though I
Jeff was totally rusty on latex
"Florian" == Florian Cramer [EMAIL PROTECTED] writes:
Florian Is there a way/a HowTo how LyX can use Adobe Type 1 fonts as
Florian _printer_ fonts? Florian
Could you be more specific? What kind of fonts would you like?
JMarc
--
+++ the lyx project user mailing list +++
"Ralf" == Ralf Plaenkers [EMAIL PROTECTED] writes:
Ralf Jean-Marc wrote:
Until then, you can get it from
http://www-rocq.inria.fr/~lasgoutt/lyx/bibviewlyx.patch.gz
If Bernhard can do a bit of packaging (explanations...) around it,
we could put it on the ftp site.
JMarc
Ralf Thanks,
"Niki" == Niki Afshartous [EMAIL PROTECTED] writes:
Niki I tried playing around with \bibliographystyle, but this seems
Niki to have no affect on font size.
Jean-Marc I am surprised. AFAIK, ams styles are the only ones which
Jean-Marc use a font for references which is smaller than the
"Reuben" == Reuben Thomas [EMAIL PROTECTED] writes:
Jeff I do suggest, that for the majority of the people who try lyx,
Jeff that the screen fonts shouldn't look blocky when lyx is first
Jeff run. I'm guessing this is something to be addressed by the linux
Jeff distributions or in RPMs or
"Raymond" == Raymond E Rogers [EMAIL PROTECTED] writes:
Raymond Look up \sqrt in the Latex manual. I believe the instruction
Raymond is \sqrt{n}{x} (in TeX mode).
Unfortunately, the right syntax is \sqrt[n]{x}. The fact that it does
not work is an old mathed bug that has still not been
"Bill" == Bill Simpson [EMAIL PROTECTED] writes:
Bill I have a LyX document (1.0.0pre2) with a number of included
Bill postscript figures taken from Mathematica (Mac version). All
Bill appears fine until I try view dvi or view ps. Then the gears
Bill grind for a while but the view is never
"Emmanuel" == Emmanuel Dumas [EMAIL PROTECTED] writes:
Emmanuel Hi I have this problem with Lyx-1.0.0pre8, when I want to
Emmanuel print my document, the dialog box ask me the instruction for
Emmanuel printing ( "lp" for my station), but Lyx always use
Emmanuel "lpr". Is it a bug ?
In fact,
"Kaare" == Kaare Rasmussen [EMAIL PROTECTED] writes:
Kaare This is not a problem report; just some thoughts. KLyX is very
Kaare nice, but how it's going to develop into a production system
Kaare for people that don't know TeX, I don't know. And if KDE is
Kaare betting on it as the heavy duty
101 - 188 of 188 matches
Mail list logo
