Hi Yann.
You cannot do this so for the time being. You have either to :
- center each cell of your column with the paragraph popup
- use the {...} construction provided by the array package(i.e.,
from the top of my head, put {\centering} in the special column
alignment
Kathryn Andersen wrote:
On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
Peter Suetterlin wrote:
Thai DANG wrote:
Do you know if there is a tool to convert Lyx format to Microsoft Word
format ?
Please read the LyX FAQ (Help-FAQ; Chapter 3.2)
In short: You have to go via RTF
I
On Wednesday 04 September 2002 17:48, Jos van den Oever wrote:
On Wednesday 04 September 2002 17:18, Jos van den Oever wrote:
Hello lyx-developers,
I'm writing my thesis in lyx 1.2.1. I've this document, entirely witten
in lyx 1.2.1 (no conversion problem). This document contains 3
Hi Juan,
maybe there are other ways, but what I'm doing is : view postcrpt and then print
from ghostview. It also works print to file (from lyx),. This give you a *.ps file
that you can open and print with gv.
I hope this will help,
Davide
Juan_Ramón_Rico [EMAIL PROTECTED] ha
There are programs such as latex2rtf, which do what you need.
Rod
On Fri, 6 Sep 2002, Thai DANG wrote:
Kathryn Andersen wrote:
On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
Peter Suetterlin wrote:
Thai DANG wrote:
Do you know if there is a tool to convert Lyx
Im not using 1.2.1 but in 1.1.6fix4 i have the following printer settings:
cmd: dvips
page range: -pp
copies: -c
reverse: -r
to printer: -P
file extension: .ps
spool command: lp
papertype: -t
even pages: -B
odd pages: -A
collated: -C
landscape: -t landscape
to file: -o
spool printer prefix: -d
Many thanks to all.
latex2rtf works very well !
Rod Pinna wrote:
There are programs such as latex2rtf, which do what you need.
Rod
On Fri, 6 Sep 2002, Thai DANG wrote:
Kathryn Andersen wrote:
On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
Peter Suetterlin wrote:
Hello all,
Sorry if the title is not that clear, here is what I look for:
I have figure floats with several figures, and I want to have letters
(a) (b) etc. under each subfigure, and before the figure caption.
I have done this using a label as a title for each figure, according
to
Hello,
I was REALLY happy when I saw that we could use footbib with lyx starting
version 1.2.1 (urls is : http://www.lyx.org/help/bibtex/footbib.php)
So I upgraded to this version and tryed this wonderfull feature. It doesn't
work unfortunately :-(
I've fallowed step to step the instructions
Hi,
I have a problem with the preview of .ps Files. The preview is not accurate at
all, the right border seems to be cut off a bit, though in the generated
postscript is all right. This makes it hard use the bounding box-feature
because I have to compile the lyx file every time I change
Hi,
when I choose a value higher than the size of the bounding box, Lyx 1.2.1
crashes. Can anybody confirm this behavior?
-j
Did you try to delete the ~/.lyx directory before the installation ?
Thiébaut wrote:
Hello,
I was REALLY happy when I saw that we could use footbib with lyx starting
version 1.2.1 (urls is : http://www.lyx.org/help/bibtex/footbib.php)
So I upgraded to this version and tryed this
Vinay Ramnath wrote:
Hi,
the installation of teTeX went fine. I put it in /usr/local/teTeX, which
was the default. However, when I tried to install LyX using rpm -Uvh
--nodeps lyx-1.2.1* it seems like the installer can't find anything of
my teTeX installation.
Which sounds believable,
Remzi Seker wrote:
Did anyone use pdfscreen with lyx?
I did. See http://www.math.tau.ac.il/~dekelts/slides/
On Fri, Sep 06, 2002 at 10:32:29AM +, Thai DANG wrote:
Many thanks to all.
latex2rtf works very well !
See also
http://www.tug.org/utilities/texconv/textopc.html
I've just moved one of our sparc-solaris-8 users from OpenWindows to
CDE. LyX fails to share the color map on the 24-bit display, and the
only cure I've found is to run `lyx -visual truecolor'. But when lyx
is started with -visual truecolor, it crashes on loading a file.
Here is the output
On Fri, Sep 06, 2002 at 12:07:01PM -0400, Ronald Florence wrote:
I've just moved one of our sparc-solaris-8 users from OpenWindows to
CDE. LyX fails to share the color map on the 24-bit display, and the
only cure I've found is to run `lyx -visual truecolor'. But when lyx
is started with
John Levon wrote:
when lyx
is started with -visual truecolor, it crashes on loading a file.
Here is the output of `-dbg 3':
What is the backtrace from :
gdb ./lyx
set args -visual truecolor -sync
run
bt
?
After the command `run' in gdb I get:
Failed to share colors. Using
Collette [EMAIL PROTECTED] wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
Hello,
I've got a problem with tabular.
I've got a table with three columns and some lines.
The title of the columns are too wide. So I set the width of the
column via the
tabular dialog (Column/Row -
Guys hello,
You might want to download Solaris 9 SPARC packages of: lyx 1.2.1 and
netpbm library + pngtopnm from my page:
http://www.extum.com/~stefan/node6.html
The site is 100% under work, I haven't got time to take care of the look
too much.
*Description:
SPlyx is a Solaris 9, SPARC
Hi,
A friend of mine sent me a file with an .lyx extension
in the hopes of opening it up to see what it was. It
was supposed to be some type of image file.
So, I installed LyX on my Linux box and proceeded to
open the file, but it won't open.
Is there any way that I can tell if this is indeed
Hi folks,
I'm writing a thesis using book class with modification to chapter numbering to
Roman but the section and subsetion and other still using arabic numbering.
Table of Contents produce in this format:
Contents
LIST OF FIGURES ...
LIST OF TABLES ...
...
...
I INTRODUCTION
1.1
On Saturday 07 September 2002 05:32, Drew wrote:
[...]
A friend of mine sent me a file with an .lyx extension
in the hopes of opening it up to see what it was. It
was supposed to be some type of image file.
So, I installed LyX on my Linux box and proceeded to
open the file, but it won't
I haven't been able to grasp what I need to do to nest lists inside of
lists, or enumerations inside of Lists, or lists inside of enumerations,
etc..
I have read that it can be done, but am clueless as to how to do it.
What am I missing?
CAM
On Sat, 7 Sep 2002, Craig Morehouse wrote:
I haven't been able to grasp what I need to do to nest lists inside of
lists, or enumerations inside of Lists, or lists inside of enumerations,
etc..
What am I missing?
The trial-and-error experience I gained. :-)
Block the group that you
How do I make a horizontal line of given length in LyX? Can this be done
without including latex code?
Thanks,
Lars.
%%%
Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999.
Tel: 775.673.7113 E-mail: [EMAIL
Hi Yann.
You cannot do this so for the time being. You have either to :
- center each cell of your column with the paragraph popup
- use the {...} construction provided by the array package(i.e.,
from the top of my head, put {\centering} in the special column
alignment
Kathryn Andersen wrote:
On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
Peter Suetterlin wrote:
Thai DANG wrote:
Do you know if there is a tool to convert Lyx format to Microsoft Word
format ?
Please read the LyX FAQ (Help-FAQ; Chapter 3.2)
In short: You have to go via RTF
I
On Wednesday 04 September 2002 17:48, Jos van den Oever wrote:
On Wednesday 04 September 2002 17:18, Jos van den Oever wrote:
Hello lyx-developers,
I'm writing my thesis in lyx 1.2.1. I've this document, entirely witten
in lyx 1.2.1 (no conversion problem). This document contains 3
Hi Juan,
maybe there are other ways, but what I'm doing is : view postcrpt and then print
from ghostview. It also works print to file (from lyx),. This give you a *.ps file
that you can open and print with gv.
I hope this will help,
Davide
Juan_Ramón_Rico [EMAIL PROTECTED] ha
There are programs such as latex2rtf, which do what you need.
Rod
On Fri, 6 Sep 2002, Thai DANG wrote:
Kathryn Andersen wrote:
On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
Peter Suetterlin wrote:
Thai DANG wrote:
Do you know if there is a tool to convert Lyx
Im not using 1.2.1 but in 1.1.6fix4 i have the following printer settings:
cmd: dvips
page range: -pp
copies: -c
reverse: -r
to printer: -P
file extension: .ps
spool command: lp
papertype: -t
even pages: -B
odd pages: -A
collated: -C
landscape: -t landscape
to file: -o
spool printer prefix: -d
Many thanks to all.
latex2rtf works very well !
Rod Pinna wrote:
There are programs such as latex2rtf, which do what you need.
Rod
On Fri, 6 Sep 2002, Thai DANG wrote:
Kathryn Andersen wrote:
On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
Peter Suetterlin wrote:
Hello all,
Sorry if the title is not that clear, here is what I look for:
I have figure floats with several figures, and I want to have letters
(a) (b) etc. under each subfigure, and before the figure caption.
I have done this using a label as a title for each figure, according
to
Hello,
I was REALLY happy when I saw that we could use footbib with lyx starting
version 1.2.1 (urls is : http://www.lyx.org/help/bibtex/footbib.php)
So I upgraded to this version and tryed this wonderfull feature. It doesn't
work unfortunately :-(
I've fallowed step to step the instructions
Hi,
I have a problem with the preview of .ps Files. The preview is not accurate at
all, the right border seems to be cut off a bit, though in the generated
postscript is all right. This makes it hard use the bounding box-feature
because I have to compile the lyx file every time I change
Hi,
when I choose a value higher than the size of the bounding box, Lyx 1.2.1
crashes. Can anybody confirm this behavior?
-j
Did you try to delete the ~/.lyx directory before the installation ?
Thiébaut wrote:
Hello,
I was REALLY happy when I saw that we could use footbib with lyx starting
version 1.2.1 (urls is : http://www.lyx.org/help/bibtex/footbib.php)
So I upgraded to this version and tryed this
Vinay Ramnath wrote:
Hi,
the installation of teTeX went fine. I put it in /usr/local/teTeX, which
was the default. However, when I tried to install LyX using rpm -Uvh
--nodeps lyx-1.2.1* it seems like the installer can't find anything of
my teTeX installation.
Which sounds believable,
Remzi Seker wrote:
Did anyone use pdfscreen with lyx?
I did. See http://www.math.tau.ac.il/~dekelts/slides/
On Fri, Sep 06, 2002 at 10:32:29AM +, Thai DANG wrote:
Many thanks to all.
latex2rtf works very well !
See also
http://www.tug.org/utilities/texconv/textopc.html
I've just moved one of our sparc-solaris-8 users from OpenWindows to
CDE. LyX fails to share the color map on the 24-bit display, and the
only cure I've found is to run `lyx -visual truecolor'. But when lyx
is started with -visual truecolor, it crashes on loading a file.
Here is the output
On Fri, Sep 06, 2002 at 12:07:01PM -0400, Ronald Florence wrote:
I've just moved one of our sparc-solaris-8 users from OpenWindows to
CDE. LyX fails to share the color map on the 24-bit display, and the
only cure I've found is to run `lyx -visual truecolor'. But when lyx
is started with
John Levon wrote:
when lyx
is started with -visual truecolor, it crashes on loading a file.
Here is the output of `-dbg 3':
What is the backtrace from :
gdb ./lyx
set args -visual truecolor -sync
run
bt
?
After the command `run' in gdb I get:
Failed to share colors. Using
Collette [EMAIL PROTECTED] wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
Hello,
I've got a problem with tabular.
I've got a table with three columns and some lines.
The title of the columns are too wide. So I set the width of the
column via the
tabular dialog (Column/Row -
Guys hello,
You might want to download Solaris 9 SPARC packages of: lyx 1.2.1 and
netpbm library + pngtopnm from my page:
http://www.extum.com/~stefan/node6.html
The site is 100% under work, I haven't got time to take care of the look
too much.
*Description:
SPlyx is a Solaris 9, SPARC
Hi,
A friend of mine sent me a file with an .lyx extension
in the hopes of opening it up to see what it was. It
was supposed to be some type of image file.
So, I installed LyX on my Linux box and proceeded to
open the file, but it won't open.
Is there any way that I can tell if this is indeed
Hi folks,
I'm writing a thesis using book class with modification to chapter numbering to
Roman but the section and subsetion and other still using arabic numbering.
Table of Contents produce in this format:
Contents
LIST OF FIGURES ...
LIST OF TABLES ...
...
...
I INTRODUCTION
1.1
On Saturday 07 September 2002 05:32, Drew wrote:
[...]
A friend of mine sent me a file with an .lyx extension
in the hopes of opening it up to see what it was. It
was supposed to be some type of image file.
So, I installed LyX on my Linux box and proceeded to
open the file, but it won't
I haven't been able to grasp what I need to do to nest lists inside of
lists, or enumerations inside of Lists, or lists inside of enumerations,
etc..
I have read that it can be done, but am clueless as to how to do it.
What am I missing?
CAM
On Sat, 7 Sep 2002, Craig Morehouse wrote:
I haven't been able to grasp what I need to do to nest lists inside of
lists, or enumerations inside of Lists, or lists inside of enumerations,
etc..
What am I missing?
The trial-and-error experience I gained. :-)
Block the group that you
How do I make a horizontal line of given length in LyX? Can this be done
without including latex code?
Thanks,
Lars.
%%%
Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999.
Tel: 775.673.7113 E-mail: [EMAIL
Hi Yann.
You cannot do this so for the time being. You have either to :
- center each cell of your column with the paragraph popup
- use the >{...} construction provided by the array package(i.e.,
from the top of my head, put >{\centering} in the "special column
alignment"
Kathryn Andersen wrote:
> On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
>
>>Peter Suetterlin wrote:
>>
>>>Thai DANG wrote:
>>>
>>>
Do you know if there is a tool to convert Lyx format to Microsoft Word
format ?
>>>
>>>Please read the LyX FAQ (Help->FAQ; Chapter 3.2)
>>>In
On Wednesday 04 September 2002 17:48, Jos van den Oever wrote:
> On Wednesday 04 September 2002 17:18, Jos van den Oever wrote:
> > Hello lyx-developers,
> >
> > I'm writing my thesis in lyx 1.2.1. I've this document, entirely witten
> > in lyx 1.2.1 (no conversion problem). This document
Hi Juan,
maybe there are other ways, but what I'm doing is : view > postcrpt and then print
from ghostview. It also works print to file (from lyx),. This give you a *.ps file
that you can open and print with gv.
I hope this will help,
Davide
Juan_Ramón_Rico <[EMAIL PROTECTED]>
There are programs such as latex2rtf, which do what you need.
Rod
On Fri, 6 Sep 2002, Thai DANG wrote:
> Kathryn Andersen wrote:
> > On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
> >
> >>Peter Suetterlin wrote:
> >>
> >>>Thai DANG wrote:
> >>>
> >>>
> Do you know if there
Im not using 1.2.1 but in 1.1.6fix4 i have the following printer settings:
cmd: dvips
page range: -pp
copies: -c
reverse: -r
to printer: -P
file extension: .ps
spool command: lp
papertype: -t
even pages: -B
odd pages: -A
collated: -C
landscape: -t landscape
to file: -o
spool printer prefix: -d
Many thanks to all.
latex2rtf works very well !
Rod Pinna wrote:
> There are programs such as latex2rtf, which do what you need.
>
> Rod
>
>
> On Fri, 6 Sep 2002, Thai DANG wrote:
>
>
>>Kathryn Andersen wrote:
>>
>>>On Thu, Sep 05, 2002 at 05:49:29PM +, Thai DANG wrote:
>>>
>>>
Hello all,
Sorry if the title is not that clear, here is what I look for:
I have figure floats with several figures, and I want to have letters
(a) (b) etc. under each subfigure, and before the figure caption.
I have done this using a label as a "title" for each figure, according
to
Hello,
I was REALLY happy when I saw that we could use footbib with lyx starting
version 1.2.1 (urls is : http://www.lyx.org/help/bibtex/footbib.php)
So I upgraded to this version and tryed this wonderfull feature. It doesn't
work unfortunately :-(
I've fallowed step to step the instructions
Hi,
I have a problem with the preview of .ps Files. The preview is not accurate at
all, the right border seems to be cut off a bit, though in the generated
postscript is all right. This makes it hard use the "bounding box"-feature
because I have to compile the lyx file every time I change
Hi,
when I choose a value higher than the size of the bounding box, Lyx 1.2.1
crashes. Can anybody confirm this behavior?
-j
Did you try to delete the ~/.lyx directory before the installation ?
Thiébaut wrote:
> Hello,
>
> I was REALLY happy when I saw that we could use footbib with lyx starting
> version 1.2.1 (urls is : http://www.lyx.org/help/bibtex/footbib.php)
>
> So I upgraded to this version and tryed this
Vinay Ramnath wrote:
> Hi,
>
> the installation of teTeX went fine. I put it in /usr/local/teTeX, which
> was the default. However, when I tried to install LyX using rpm -Uvh
> --nodeps lyx-1.2.1* it seems like the installer can't find anything of
> my teTeX installation.
Which sounds
Remzi Seker wrote:
> Did anyone use pdfscreen with lyx?
I did. See http://www.math.tau.ac.il/~dekelts/slides/
On Fri, Sep 06, 2002 at 10:32:29AM +, Thai DANG wrote:
> Many thanks to all.
> latex2rtf works very well !
See also
http://www.tug.org/utilities/texconv/textopc.html
I've just moved one of our sparc-solaris-8 users from OpenWindows to
CDE. LyX fails to share the color map on the 24-bit display, and the
only cure I've found is to run `lyx -visual truecolor'. But when lyx
is started with -visual truecolor, it crashes on loading a file.
Here is the output
On Fri, Sep 06, 2002 at 12:07:01PM -0400, Ronald Florence wrote:
> I've just moved one of our sparc-solaris-8 users from OpenWindows to
> CDE. LyX fails to share the color map on the 24-bit display, and the
> only cure I've found is to run `lyx -visual truecolor'. But when lyx
> is started
John Levon wrote:
>>when lyx
>>is started with -visual truecolor, it crashes on loading a file.
>>Here is the output of `-dbg 3':
>
>
> What is the backtrace from :
>
> gdb ./lyx
> set args "-visual truecolor -sync"
> run
> bt
>
> ?
After the command `run' in gdb I get:
Failed to share
Collette <[EMAIL PROTECTED]> wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
> Hello,
>
> I've got a problem with tabular.
> I've got a table with three columns and some lines.
> The title of the columns are too wide. So I set the width of the
> column via the
> tabular dialog (Column/Row
Guys hello,
You might want to download Solaris 9 SPARC packages of: lyx 1.2.1 and
netpbm library + pngtopnm from my page:
http://www.extum.com/~stefan/node6.html
The site is 100% under work, I haven't got time to take care of the look
too much.
*Description:
SPlyx is a Solaris 9, SPARC
Hi,
A friend of mine sent me a file with an .lyx extension
in the hopes of opening it up to see what it was. It
was supposed to be some type of image file.
So, I installed LyX on my Linux box and proceeded to
open the file, but it won't open.
Is there any way that I can tell if this is indeed
Hi folks,
I'm writing a thesis using book class with modification to chapter numbering to
Roman but the section and subsetion and other still using arabic numbering.
Table of Contents produce in this format:
Contents
LIST OF FIGURES ...
LIST OF TABLES ...
...
...
I INTRODUCTION
1.1
On Saturday 07 September 2002 05:32, Drew wrote:
[...]
> A friend of mine sent me a file with an .lyx extension
> in the hopes of opening it up to see what it was. It
> was supposed to be some type of image file.
>
> So, I installed LyX on my Linux box and proceeded to
> open the file, but it
I haven't been able to grasp what I need to do to nest lists inside of
lists, or enumerations inside of Lists, or lists inside of enumerations,
etc..
I have read that it can be done, but am clueless as to how to do it.
What am I missing?
CAM
On Sat, 7 Sep 2002, Craig Morehouse wrote:
> I haven't been able to grasp what I need to do to nest lists inside of
> lists, or enumerations inside of Lists, or lists inside of enumerations,
> etc..
>
> What am I missing?
The trial-and-error experience I gained. :-)
Block the group that
How do I make a horizontal line of given length in LyX? Can this be done
without including latex code?
Thanks,
Lars.
%%%
Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999.
Tel: 775.673.7113 E-mail: [EMAIL
78 matches
Mail list logo
