On 08/27/2014 10:57 PM, William Hanson wrote:
To All,
I have a document that I want to submit to a Springer journal. Their
web site won't accept my LyX file. It wants a TeX file. How do I
convert LyX to TeX?
Bill Hanson
Last time I had a similar problem.
The way I managed to submit corr
Recently, I received a warning that pdfview.exe in folder bin is detected
as trojan.win32.agent.87672 and the file deleted. The antivirus is ViRobot.
Then I used another computer using AVG antivirus, and submit the
pdfview.exe to virscan.org.
The result is confirming that this file is detected tro
On Mon, 09 Dec 2013 16:14:02 +0100, Waluyo Adi Siswanto <
> was.u...@gmail.com> wrote:
>
> What is this problem and how I can install lyx again.
>>
>
>
> Hi waluyo,
>
> As far as I know LyX does not need to be installed, it should work fine
> when being cop
When you prepare article using lyx, make sure all figures in the same
folder with your lyx article. You can export to plain latex. Submit your
.tex also all figures. You should be able to get pdf from their system.
regards,
WAS
On 29 October 2013 22:34, Rahayu Prihatin wrote:
> Hi people,
>
>
You can try the following in your latex preamble (Document Settings)
\lhead{}
\chead{}
\rhead{}
\lfoot{}
\cfoot{\thepage}
\rfoot{}
regards
waluyo
On 19 March 2013 05:05, Lukas Koch wrote:
> Hello!
>
> I have the simple problem, that the footer in the titleplage of the
> document-class article (
Did you try
\AtBeginDocument{%
\renewcommand{\abstractname}{Summary}%
}
that works for me in default language.
regards,
waluyo
On 6 December 2012 21:30, Roey Angel wrote:
> Hi,
> I'm trying to change the section name 'Abstract' to 'Summary' in an article
> class document with babel enabled
I have reported here but no response.
http://www.lyx.org/trac/ticket/7524
regards
waluyo
On 18 November 2012 07:44, Waluyo Adi Siswanto wrote:
> I have a problem until today,
> When I open LyX preference in small screen netbook (Ubuntu OS) (Tools
>> Preferences), I cannot see the R
I have a problem until today,
When I open LyX preference in small screen netbook (Ubuntu OS) (Tools
> Preferences), I cannot see the Restore, Save, Apply, and OK buttons.
The window cannot be resized (to make it smaller).
For the Document > Settings, the size is ok, it just fit the small
netbook s
I use book(KOMA-script)
the package indentfirst works for me.
regards
waluyo
On 11/04/2012 11:22 PM, Jürgen Spitzmüller wrote:
Denisson wrote:
Hi folks,
I'd like to indent first paragraph, what's the easiest way to do this? I've
found some messy ways to do this..
\usepackage{indentfirst}
in
On 6 March 2012 10:32, Louise Wilkinson wrote:
> Hi,
>
>
>
> I finding it difficult to get Lyx to put the first page number at the bottom
> of the page and all subsequent numbers in the top right hand corner. Thanks
> in advance for your help.
>
In book(KOMA-script) document class, I use the foll
Hi all,
Although there is no official announcement release of lyx-2.0.3,
lyx in my Ubuntu 11.10 has been updated to lyx-2.0.3 today (from
getdeb repository).
regards,
waluyo
On 28 February 2012 14:51, Stephan Witt wrote:
> Am 28.02.2012 um 07:33 schrieb Waluyo Adi Siswanto:
>
>> Hi,
>>
>> I just install LyX 2.0.3(downloaded from sourceforge mentioned by Uwe)
>> in Windows 7(64bit) and want to try control version.
>> When I open lyx
Hi,
I just install LyX 2.0.3(downloaded from sourceforge mentioned by Uwe)
in Windows 7(64bit) and want to try control version.
When I open lyx document (*.lyx) in control version folder (using
TortoiseSVN). The file that I open does not show that it is under
control version.
File>Version control
>>> I want to export to archive (zip) from export menu.
>>> An error popped up. What is that, how can export it in archive file?
>>> This is in windows 7, LyX 2.0.2
>>
>> Please run lyx from a terminal and you should get more output.
>>
>
> Running LyX from window terminal does not give any informa
>> I want to export to archive (zip) from export menu.
>> An error popped up. What is that, how can export it in archive file?
>> This is in windows 7, LyX 2.0.2
>
> Please run lyx from a terminal and you should get more output.
>
Running LyX from window terminal does not give any information,
how
I want to export to archive (zip) from export menu.
An error popped up. What is that, how can export it in archive file?
This is in windows 7, LyX 2.0.2
I can preview pdf and export pdf as usual.
regards
waluyo
<>
>>
>> Dear All,
>>
>> Is that possible to write citation: Author [#ID]
>> I tried the following combination:
>> - Document settings> Biblliography> Natbib style: numerical
>> - Insert> List/TOC> Bibtex bibliography> style: klunum
>>
>> But when I cite a reference:
>> Insert> Citations> Form
Dear All,
Is that possible to write citation: Author [#ID]
I tried the following combination:
- Document settings > Biblliography > Natbib style: numerical
- Insert > List/TOC > Bibtex bibliography > style: klunum
But when I cite a reference:
Insert > Citations > Formating> Citation style: Autho
Dear LyX users
Happy New Year 2012
I have released the fifth maintenance of uthm-thesis-lyx
http://code.google.com/p/uthm-thesis-lyx/
I hope this thesis example will be useful to others too.
If you have any suggestions to improve this thesis template project,
especially to cleanup many ERT that
On 30 December 2011 06:56, Jane Shevtsov wrote:
> Hi all,
>
> I have a rotated table and need to put it on a landscape page. How do I do
> this? I tried the \begin{landscape} tag suggested at
> http://www.latex-community.org/forum/viewtopic.php?f=5&t=1771 but LyX
> complained that the file was cor
On 4 December 2011 00:15, Francesco Menoncin wrote:
> Il 03/12/2011 15:11, Waluyo Adi Siswanto ha scritto:
>
> On 3 December 2011 18:47, Liviu Andronic wrote:
>
> On Sat, Dec 3, 2011 at 11:38 AM, Francesco Menoncin
> wrote:
>
> I am working on two pc's Ubuntu
On 3 December 2011 18:47, Liviu Andronic wrote:
> On Sat, Dec 3, 2011 at 11:38 AM, Francesco Menoncin
> wrote:
>> I am working on two pc's Ubuntu 11.01 and Windows 7.
>> I have already installed LyX 2.0.2 on Windows 7 and everything is fine (the
>> new version works great).
>> I have problem with
There is also possibility in latex preamble. Missing parenthesis in
looping, so that a command calling itself?
regards
waluyo
On 5 September 2011 12:00, David L. Johnson wrote:
> On 09/04/2011 11:27 PM, Hady Ariwibowo Teguh wrote:
>
> Dear All,
> I have a problem with TEX capacity. Well, When i
>> Why LyX does not write the extension, is this a bug?
>
> No, it's a feature. If no extension is specified, LaTeX (the graphics package,
> for that matter) searches for the most suitable format for the given
> processor. So if you have \includegraphics{myfile} and two files myfile.eps
> and myfil
> Export to latex (plain) from Lyx
> pdflatex filenm
> bibtex filenm (if you use a latex-aware editor like WinEdt under Windows, or
> Kile under Linux they will run bibtex for you automatically) to produce a
> .bbl file in your working directory
> Using an editor (WinEdt or Kile) add the .bbl file
>
> I think you are correct. My files could been processed by elsevier
> electronic system, the generated pdf prints the tex sources.
Sorry mistyped:
My files could "not" been processed by elsevier electronic system.
> How can I get bbl. I always use bib file (from JabRef). Any link
> informa
> Actually, I believe they prefer to have the *.tex and *.bbl (not the *.bib),
> as well as files containing figures etc. But you'll see all that in the
> detailed instructions.
>
I think you are correct. My files could been processed by elsevier
electronic system, the generated pdf prints the tex
> is there anyway to comment figures or text in lyx?
>
> for text I know the % character in ERT
> but I do not know how to comment figures in Lyx.
> by comment I mean simply do not show them in the output file.
>
You can use "draft mode". Click the figure, go to "LaTeX and LyX
options", then enabl
; 5.pdflatex fileName
>
> you need to compile the bibliography (bibtex fileName)
> also run the command pdflatex twice.
>
>
> hope this helps.
> ~Eisa
>
> On 2011-08-23, at 8:28 PM, Waluyo Adi Siswanto wrote:
>
>> Hi all,
>>
>> I am writing a paper m
Hi all,
I am writing a paper manuscript in lyx.
Unfortunately only latex (tex) format is accepted by the journal publisher.
I have tried to export to latex(pdflatex), then successfully created paper.tex
I tested the created tex file and compile using this command: pdflatex paper.tex
It created
>
> No, I installed the Ubuntu version. So -- I need to build this thing?
>
I had the same problem then Tools>Preferences>Language Settings>Spellchecker
In spellchecker engine select "Enchant", also enable Spellchecker continuously.
regards
waluyo
>
>
> I have problem how to change the Figure format. Just like this:
> Figure 2.1: ==> Figure 2.1
> How i can fix that??
>
It depends the class (*.cls) that you are using.
Sometimes it can be modified by using renewcommand in the preamble.
regards
waluyo
> In my lyx document I wish to put the figure approximatively where
> they should be in the final document. However, I wish, in a draft
> version, to have all the figures coming at the end of the document.
> Is there an option to do so ?
Usually I use figcaps package, inserted in latex preamble
(
> Oops,
> It seems I got an additional dot in the figures.
No, I don't have any problems for the figures (float), see the attachment.
newfile1.pdf
Description: Adobe PDF document
>
> This works great for sections.
> However, this will add an extra dot for the subsections.
> I ended up having something like this:
>
> 1. Introduction
> 1..1 Problem Definition
>
> instead of
>
> 1. Introduction
> 1.1 Problem Definition
Then I would the following commands to redefine
> I need to insert a dot after the section number like
> 1. Introduction
This command works for me, see dot before }
\renewcommand \thesection {\@arabic\c@section.}
Inserted in latex preamble (Document>settings>latex preamble)
regards
waluyo
Thanks Paul
Now I have both 1.6 and 2.0 versions in my Windows XP box.
Regards
Waluyo
On 9 July 2011 05:56, Paul Rubin wrote:
> Waluyo Adi Siswanto gmail.com> writes:
>
>> Is that possible to have lyx 2, while maintaining 1.6.10 in the machine.
>
> Yes. LyX 2 will ins
I have a fresh windows xp machine and already installed lyx-1.6.10
using altinstaller-complete (including miktex 2.9).
Is that possible to have lyx 2, while maintaining 1.6.10 in the machine.
If it is possible, which lyx 2 installer that I can use.
Thank you for any information
waluyo
On 15 June 2011 16:45, Chdslv wrote:
> Hi,
>
> I have installed Lyx 2.0 in Ubuntu 11.04, but I can't get the spell checker
> open. Its grayed off and F7 doesn't work.
> I have myspell-en-us, Aspell-en, hunspell-en installed too.
>
> I'd appreciate any help on this
>
As far as I know you need to i
>
> Where is example_raw.lyx?
>
You can find it from File > Open, then click the Example button.
Then you will find that file.
Regards
waluyo
I using book(koma-script).
The List of Figure that I want:
=
List of Figures
Fig No.TitlePage
1.1 Title1
1.2 Title40
etc
=
How can I add "Fig No.TitlePage" appeared in L
>
> Alternatively you can create your own style by answering questions using a
> command-line tool (custom-bib, bib-it)
>
Another alternative is by using makebst
an example how to use makebst is documented here:
http://sites.google.com/site/lyxthesistemplate/5-bibliography/4-custumize-style-bst
R
> Proper script is that:
> #!/usr/bin/env sh
> QT_X11_NO_NATIVE_MENUBAR=1 lyx "$@"
>
> Such version allows passing of invocation arguments.
Oh.. yes, that's correct. Running LyX from the menu using the previous
script, creates another problem. Double clicking lyx document will not
be success
> It works by using this command (from the terminal)
>
> QT_X11_NO_NATIVE_MENUBAR=1 lyx
>
Perhaps, for those using Ubuntu Netbook and have the same problem;
a) Create a file lyx_command.sh
#!/bin/sh
QT_X11_NO_NATIVE_MENUBAR=1 lyx
b) Change permission to "Allow executing file as program"
>
> https://bugs.launchpad.net/ubuntu/+source/indicator-appmenu/+bug/619811
>
Thanks a lot for your prompt reply.
It works by using this command (from the terminal)
QT_X11_NO_NATIVE_MENUBAR=1 lyx
Best Regards
waluyo
On 13 November 2010 19:42, Waluyo Adi Siswanto wrote:
>>
>> there can be many different problems what's wrong. the best is to go to
>> console,
>> and try to commit from there and look what will happen.
>> didn't you commit for example from a different b
>
> there can be many different problems what's wrong. the best is to go to
> console,
> and try to commit from there and look what will happen.
> didn't you commit for example from a different box before?
>
Yes, the first I found the problem was from Windows machine, I thought
LyX version contro
I have encountered a problem in using LyX version control (Check in changes).
I did many times previously to directly checkin changes (from within
LyX 1.6.7) to my lyx project in googlecode SVN repository.
Since yesterday It does not work any more. Other submenus (checkout,
update, revert, show
I just compile lyx-2.0.0beta1
using the following commands:
./configure --with-version-suffix=-2.0.0beta1
make
sudo make install
everything ok no errors, but when I run lyx-2.0.0beta1, the
spellchecker is not active.
If I see the from the preference, it is grey (see the attachment)
My lyx-1.6.7
> "SHIFT +^" is binded to the supscript, then how can I input "^"
>
If you are in math mode, you can use superscript (also subscript). You
can see the tool at the bottom of your lyx window (appear
automatically in math mode/equation).
In math mode, the superscript also work, just press Shift+^ .
> When inserting a cross-reference, i get no spacing around it, i.e.
> "Now returning to[eq:main], we see..."
> instead of the way I would like it:
> "Now returning to [eq:main] , we see...".
In this case I use prettyref. You can put space also additional text
if you like.
I have an example here:
> % a hook to center figures
> \newcommand{\centerfloat}[1]{
> \expandafte...@addto@macro\csname
> #1\expandafter\endcsname\expandafter{\centering}}
>
> \centerfloat{figure}
> \centerfloat{figure*}
>
It works in book(koma-script).
Actually I need this too.., thank you
Regards
waluyo
> Dear Lyx users,
> i'm having a problem with citations. For example, if I have a bibliography
> entry as "Babinsky, H (2003). How do wings work? [online] Department of
> Engineering, University of Cambridge Available from:
> http://iopscience.iop.org/0031-9120/38/6/001/pdf/pe3_6_001.pdf [Accessed
> Thank you very much for your reply. It is now clear to me. Is there any way
> that this numbering style can replace the page numbers at the bottom?
>
In this situation, usually i use fancyhdr and lastpage
Document->Settings->Page layout, heading style changed to "fancy"
then in the latex preamb
Dear All
It has been a while my JabRef cannot fetch citation data from Science
Direct anymore. It was OK.
Can anyone help me to make this work.
Regards
Waluyo
>
> A thesis is basically a book. But even this statement is not always correct.
> There are different types of theses: for Bachelor, Master, Diploma, Ph.D.,
> ...
Books usually a bit fancy, chapter headings a bit fancy, not too
formal. For LaTeX expert might not be a problem to customize
everythi
>> 2010/10/28 Emil Pavlov :
>>> Can somebody recommend me a free svn repository hosting, where I can upload
>>> my Lyx document. In my case I need two people to have access to the
>>> repository.
>>>
>> I find Assembla.com very nice. It offers 2GB of private space for
>> free. The service seems pro
> It is a derivative of my thesis template. Of course every University has its
> own thesis layout. Therefore the thesis template is designed to give the
> user a basic feeling how a thesis will look like. The template can easily be
> modified to fulfill the requirements of every university.
> For
>> I've used and modified the template that Uwe sent some months ago. I did
>> my best to learn through
>> the manual, this list and other examples, so to customise it to my needs.
>> however, there are some formatting details that I've failed to achieve and
>> I'm sure that they are
>> quite simpl
> around this issue, there are two things. You need to patch your inkscape
> python installation with something like this
> http://sourceforge.net/projects/timink/files/pygtk-2.16_for_inkscape-0.48.zip/download
> and you need to modify your textext.py file as per the instructions here:
> http://pas
On 26 October 2010 14:05, sherif helmy wrote:
> Thank you very much for your attention
>
> I have MikTex ver 2.9 and Lyx ver 1.6.7
> i attached with this message a snapshot of MikTex package manager showing
> info. you requested.
> Thanks again
>
Yes.. it is installed already.
Actually I have n
>
> I have a lot of floating figures inserted in my file with captions. They're
> in .png format, with 300dpi.
> Since many are too big to fit the default page, I was wondering if there was
> any package or command to resize them automatically, to fit in within the
> 95% of the widthpage, for examp
On 25 October 2010 12:38, sherif helmy wrote:
> Thanks for your atention
> I did what you told me but the message is still exisiting
> thanks
>
Do you see article (IEEEtran) active ?
(from the LyX menu Document->Settings, under Document class)
Regards
Waluyo
>
>
> The layout file requested by this document IEEEtran.layout, is not usable.
> This is probarly because a Latex class or style file required by it is not
> available. See the customization documentation for more information. Lyx
> will not be able to produce output.
>
You need to install IEEEt
> Can some one help me on how to remove headers from a document. I am using a
> thesis template based on koma-script.
>
You can use fancyhdr package (Documents>Setting) page layout>heading
style->fancy
then you can control using \lhead \chead \rhead \headrulewidth in
latex preamble.
I have an exa
> i. To make sure svjour3.cls is available, Tools>Reconfigure, Rescan.
> svjour3.cls should be in the list
Sorry, mistyped; not Tools>Reconfigure but Tools>TeX information
Regards
waluyo
> 2. I've downloaded
> http://www.springer.com/cda/content/document/cda_downloaddocument/LaTeX.zip
> (which has, among others, the file svjour3.cls)
Here is the steps (what I did in Ubuntu) to enable article svjour3:
a. Create folder /tex under /usr/local/share/texmf
b. Create folder /latex under
> and I'd prefer it was:
>
> I Chapter dfg
> 1 Section dhd
> a) Subsection sfgh
> b) Subsection dfds
> i) Subsubsection fjkf
>
> Is this possible?
In Latex preamble:
\renewcommand*{\thechapter...@roman\c@chapter}
\renewcommand*{\thesection...@arabic\c@section}
\renewcommand*{\thesubsection...@alph
On 15 October 2010 00:24, Waluyo Adi Siswanto wrote:
>>
>> does this help?
>> http://wiki.lyx.org/LyX/Figures#toc11
>>
>
> and for the cross references in the text, you can modify by using
> hyperref package, the example is here:
>
> http://sites.go
>
> does this help?
> http://wiki.lyx.org/LyX/Figures#toc11
>
and for the cross references in the text, you can modify by using
hyperref package, the example is here:
http://sites.google.com/site/lyxthesistemplate/4-cross-references
The cross reference uses formated reference (Insert>Cross refer
> Document classes don't have their own fonts. You can choose a font you want
> for every document class.
>
> regards Uwe
>
But in some environments (chapter, section, subsection), they are
always in SansSerif?
Do you mean the standard environment?
WAS
> \newlistof{appendices}{loa}{List of Appendices}
> Now \listofappendices should do what you want, assuming the \chapter stuff
> is right. The \newlistof command defines the \listofappendices command for
> you, getting the end bit from the first argument.
>
Yes... it works thanks a lot. For cen
Thanks Richard for the information
> I think you need to use the tocloft package. See section 2.4 of the manual,
> on the \newlistof command. You'll do something like:
> \newlistof{appendix}{loa}{\listofappendices}
I wrote in the latex preamble:
\newcommand{\listofappendices}{\chapter{List of
> What do you mean by 'separate List of Appendices'? You can have
> different sections in the Appendix. Does the attached do what you
> need?
>
Thanks but the attached file is not a problem from me. When I insert
TOC the appendix heading will printed in the TOC, which is not the
format that I want
related to this separate List of
Appendices.
Please any help/information could be very useful.
Thank very much in advance.
Regards, Waluyo
On 2 October 2010 17:04, Waluyo Adi Siswanto wrote:
> Dear All
>
> I am using book(KOMA-script) and I want to have a separate List of
> App
Dear All
I am using book(KOMA-script) and I want to have a separate List of Appendices.
I have no problems in defining appendices (from the menu
Document>Start Appendix Here).
There are two problems:
a. The appendices are listed in TOC, how can I prevent this?
b. I would like to have separate Lis
> \begin{biography}
> {Stephen Thomas, } \textit{\footnotesize B.Tech ECE, Hardware Design
> Engineer,Vinvish Technologies}.\textit{\footnotesize{} }
> \end{biography}
>
I am not sure what's the problem with your document, however it works
fine to me.
When I use IEEEtrans document class, the biog
> In the end of the IEEE trans template there is an option to insert the
> authors photo in the Biography section
> If we do nothing a BOX printed with "PLACE YOUR PHOTO HERE " appears
> I want to remove that and insert a photos there
Yes .. in biography environment, go to menu Insert>Short Title
>
> according to my needs except for one single thing; "Inserting the authors
> photo" at the bibliography
>
You can find it in LyX template (File>New from template>IEEETran.lyx):
by using Insert>Short Title.
Regards
Waluyo
Dear All
I would like to create book cover using LyX.
I did searching and found how to use pstricks, however it is pure LaTeX.
Is there any example in implementing pstricks within LyX that I can learn.
Perhaps it would be very useful if a template of book-cover is in LyX
template folder.
Regard
>
> \renewcommand*{\chapterheadendvskip}{%
> \vspace{1.725\baselineskip
> �...@plus .115\baselineskip \...@minus .192\baselineskip}%
> }%
>
Thanks for the suggestion, but I don't know these three values: 1.725,
.115, .192?
I tried
\renewcommand*{\chapterheadendvskip}{{\vspace{3cm}}
i
Dear All
I use book(koma-script) and the set the option parskip=full and chapterprefix
(Documents>Settings, option: parskip=full,chapterprefix).
I want to have more space between the chapter entry and the first paragraph:
Chapter 1
Introduction
^
| (more space here)
|
V
The first paragraph...
H
I have the answer, write in the latex preamble
\renewcommand\IEEEkeywordsname{Keywords}
Waluyo
On 6 July 2010 16:52, Waluyo Adi Siswanto wrote:
> I am using a document class article(IEEETran).
> However I need to use "Keywords" instead of the default "Index Terms&q
I am using a document class article(IEEETran).
However I need to use "Keywords" instead of the default "Index Terms"
How can I change to "Keywords"
Thanks,
Waluyo
>
> I'm having trouble using insert List/TOC BibTeX Bibliography in Lyx. I
> want to insert a Jabref file but this has the extension .bib and Lyx is
> looking for a file with extension .bst. Any help to fix this problem would
> be most appreciated. Thanks
>
In the BibTeX bibliography dialog, sel
On 12 February 2010 02:23, Daniele_P wrote:
>
> Dear LyX developers,
>
> I am trying to make a submission to a Elsevier Journal and I am using the
> LyX elsarticle template, which is supposed to match the Elsevier
> requirements.
>
> The template already includes a BibTex bibliography with the req
On Sun, 2010-03-07 at 01:46 +0100, Sajjad wrote:
> Hello forum,
>
> I am writing in report class and i would like to have my name on each page.
>
>
> Any hint on how to do it?
>
>
>
> Regards
> Sajjad
You can get the detail explanation (pdf user manual of fancyhdr) how to
modify, as mentione
On 2 February 2010 19:02, Vincent van Ravesteijn - TNW
wrote:
>>[examples/splash.lyx] is the document which automatically opens when
> user
>>runs LyX first time after installation. The problem is that the "View -
>>OpenDocument" command produces empty output for me. Please help!
>
> Don't use Ope
>> >
>>
>> We can't help that the third-party utilities are not
>> correctly installed on your system. Please turn to the
>> websites of these utilities and find out how you can
>> properly install them.
>>
>
> I thought I could export to opendocument, where formulas are editable...
> Then, I coul
On 23 January 2010 05:56, Richard Brown wrote:
> I don't seem to be able to do this. If I put a \frontmatter command in
> before my title, anything longer than five words produces a compile
> error. What am I missing?
>
> TIA
>
>
>
> Richard
>
>
You can try one line before your title. Type \frontm
On 23 January 2010 05:37, Richard Brown wrote:
> Hello again.
>
> Is it possible to edit the contents of \leftmark so that they contain
> the chapter name but not the chapter number, and of \rightmark so that
> the inverse is true?
>
> Or would there be a better solution to my issue, which is how
Dear All
I am going to export lyx file to pdf, but not all pages.
What I usually do: File>export>pdf(pdflatex)
but it will export all pages.
Is that possible to chose only at specific pages, for example page 13
to 14 only.
Thanks
Waluyo
>
> and when adding the document class option
> chapterprefix=true
> I correctly get the word "chapter" in front of the chapter number at the
> page where the chapter starts.
>
No, It did not work..
It works if I just write chapterprefix (no need =true)
I am using LyX1.6.5 in Ubuntu 8.10, Texlive
>
> After I run pdflatex, the TOC is displayed in red in the pdf. How do I
> change it ?
If you are using hyperef support (from document>settings), you need yo
add additional options: linkcolor=blue.
or any color to replace "blue"
waluyo
>>
>> Hello.
>>
>> In my book, I want to put a preface after the TOC and before chapter 1.
>> But I can't work out how to eliminate the text 'Contents' that appears
>> not only on the TOC pages (where I want it) but also in the header of
>> the preface, where I decidedly don't. I've experimented wi
> >
> > How I can fix this ?
>
> it looks the qt libraries are messed up in your system. try reinstalling them.
> the last possibility would be to compile qt locally in your home and link
> lyx against them (some proper arg for configure).
>
Thanks Pavel I really appreciate it
I tried to find d
>>
>> Here below: there is a message cannot mix incompatible Qt libraries?
>
> It appears so... Did you compile your own Qt? There is no backtrace here
> because gdb does not know which Qt to use apparently...
>
I compiled LyX from the source to install , something like
./configure (with prefix),
> If you are under Linux, start LyX with gdb at the commandline:
>
> ~Waluyo$ gdb lyx
> ~Waluyo$ run
>
> ... make LyX crash
>
> ~Waluyo$ bt
>
> ...copy and send to the development list what is displayed here...
>
> Abdel.
>
Here below: there is a message cannot mix incompatible Qt libra
>>
>> It works on my Debian system without the SVN-PNG and SVG-PPM converters.
>> LyX is able to preview from EPS and/or PDF using the internal QT
>> converter.
>>
>> So, instead of adding, just remove the offending definitions.
>
> Still, LyX should not crash... A gdb backtrace would be nice...
>
>
> I only have this in my lyxrc.dist file:
>
> \format "svg" "svg" "SVG" "" "inkscape --file=$$i" "inkscape --file=$$i"
> "vector"
> \converter "svg" "png" "inkscape --without-gui --file=$$i --export-png=$$o"
> ""
> \converter "svg" "pdf" "inkscape --file=$$i --export-area-drawing
> --without-gui
1 - 100 of 215 matches
Mail list logo