Hello all,
I have a big problem... My thesis is finished and I cannot compile the complete
pdf. When I export to pdf (any option) I only export 52 pages. My thesis is 350
pages more or less... but I cannot compile the complete one. The list of
contents, figures and tables doesn't appears either.
If the Mathcad proram can output XML, there might be a chance to use that. I
found a lot of texts about using TeX for outputting XML, but very few for
inputting XML in TeX. The best references are:
Numerical Algorithms Group (NAG)
xmltex: A non validating (and not 100% conforming) namespace
NinaNutz lamari...@... writes:
I tried to uninstall and reinstall the previous version 1.5.6 and it happens the
same...
I really don't know what to do...
NinaNutz lamari...@... writes:
I tried to uninstall and reinstall the previous version 1.5.6 and it
happens the same...
I really don't know what to do...
Isn't there something strange at the 53th page. Look for possible
sources of error there.
Otherwise try to compile the document from the
NinaNutz wrote:
I have a big problem... My thesis is finished and I cannot compile the complete
pdf. When I export to pdf (any option) I only export 52 pages. My thesis is 350
pages more or less... but I cannot compile the complete one. The list of
contents, figures and tables doesn't appears
On 2009-02-24, Laser Yuan wrote:
I need to write an description for an algorithm in my paper, which includes
several steps . Basically the Enumerate style will fit my purpose. Except
that I want a sequence like this:
Step 1 ...
...
Step 2
...
instead of
1.
On 2009-02-23, Nikos Alexandris wrote:
On Mon, 2009-02-23 at 08:12 +, Guenter Milde wrote:
On 2009-02-22, Nikos Alexandris wrote:
I guess it's a font-specific issue. Too bad because Bera looks great.
Txtt:
Set the typewriter font to Default in the GUI and write in the preamble
On 2009-02-23, Dotan Cohen wrote:
For LyX (or LaTeX) it is important to know in what language you are
writing. Not only the directionality, but also font encoding (while LyX
uses Unicode by now, LaTeX does not) and hyphenation depend on this.
I see, I did not realize that LaTeX does not
On 2009-02-23, Nikos Alexandris wrote:
On Mon, 2009-02-23 at 07:27 +, Guenter Milde wrote:
IMO, there is room for a better UI than hiding language switching
under EditText-StyleCustom.
Also, the apply last style button would become more useful if it would
not mix change of font size
Thanks, Gunter. I will put some time into this.
--
Dotan Cohen
http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת
ا-ب-ت-ث-ج-ح-خ-د-ذ-ر-ز-س-ش-ص-ض-ط-ظ-ع-غ-ف-ق-ك-ل-م-ن-ه-و-ي
А-Б-В-Г-Д-Е-Ё-Ж-З-И-Й-К-Л-М-Н-О-П-Р-С-Т-У-Ф-Х-Ц-Ч-Ш-Щ-Ъ-Ы-Ь-Э-Ю-Я
+1 (from an end-user) for a separate _language_ button.
So who is going to file an enhancement request to bugzilla.lyx.org?
Give me a few minutes...
--
Dotan Cohen
http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת
+1 (from an end-user) for a separate _language_ button.
So who is going to file an enhancement request to bugzilla.lyx.org?
Give me a few minutes...
Please, explain exactly how you see this..
..then implementing this would me much faster.
Where do you set the languages used in
Hi all!
[Using LyX 1.6.1 under Ubuntu II/ 64-bit, book(KOMA-Script)]
I've decided to use the minitoc package. I would like to have (as many
others would like to have :-) a _SectionToC_ for each Chapter (except
the 1st) in the beginning, of course, of each Chapter, listing Sections
(x.x) and
On Mon, 2009-02-23 at 11:20 +0100, Manveru wrote:
2009/2/22 Nikos Alexandris nikos.alexand...@felis.uni-freiburg.de:
[ I am posting a listing-related problem here instead of starting a new
thread. ]
I now realise how powerful is the listing package. I used some R code
and setting the
Nikos:
I guess it's a font-specific issue. Too bad because Bera looks great.
Guenter:
Txtt:
Set the typewriter font to Default in the GUI and write in the preamble
\renewcommand{\ttdefault}{txtt}
Nikos:
Not bad (the font in general). Yet:
i. the backticks still look like ticks
Please, explain exactly how you see this..
..then implementing this would me much faster.
Where do you set the languages used in toggling ?
Should this be stored in the LyX file ?
Vincent
I would imagine a button on the toolbar, that would toggle between
preconfigured input languages.
I am testing the \mtcaddchapter command. I'll probably figure this out.
If not I will _bump_ :-p
Sorry the for the mail-traffic, Nikos
Paul A. Rubin ru...@... writes:
Thanks Paul, that works fine.
I was using float.
Graham
My apologies if this has been asked before, but I couldn't find anything
directly relevant in the archives. I'm hitting a problem with IEEEtran and
LyX; it would be great if anyone could help to work out whether it is a
problem in what I'm doing, or perhaps a bug. I should add that I'm
reasonably
Pol wrote:
While the single arrow in command
\xymatrix{A \ar[r] B}
is displayed by lyx, three arrow graph in command
\xymatrix{ p,a \\ p \ar[r] \ar[ur] \ar[dr] p,n \\ p,e }
is undisplayed (yet correctly printed out)
Any ideas?
Any matrix or array specifications needed in the preamble?
Kenward Vaughan wrote:
Sorry, I don't know whether this is LyX or LaTeX. When I print out
documents generated by LyX, I see weird marks on the paper not seen in
the screen copy. They are horizontal, very small, and seem to mark the
heights of (some of) the characters on the page. Those capitals
On 2009-02-24, Dotan Cohen wrote:
Please, explain exactly how you see this..
..then implementing this would me much faster.
Where do you set the languages used in toggling ?
Should this be stored in the LyX file ?
I would imagine a button on the toolbar, that would toggle between
On Tuesday 24 February 2009 09:06:47 am Nikos Alexandris wrote:
Hi all!
[Using LyX 1.6.1 under Ubuntu II/ 64-bit, book(KOMA-Script)]
I've decided to use the minitoc package. I would like to have (as many
others would like to have :-) a _SectionToC_ for each Chapter (except
the 1st) in the
On Tue, 2009-02-24 at 11:17 -0500, Steve Litt wrote:
On Tuesday 24 February 2009 09:06:47 am Nikos Alexandris wrote:
Hi all!
[Using LyX 1.6.1 under Ubuntu II/ 64-bit, book(KOMA-Script)]
I've decided to use the minitoc package. I would like to have (as many
others would like to have
On Tuesday 24 February 2009 06:04:36 am NinaNutz wrote:
Hello all,
I have a big problem... My thesis is finished and I cannot compile the
complete pdf. When I export to pdf (any option) I only export 52 pages. My
thesis is 350 pages more or less... but I cannot compile the complete one.
The
On Friday 17 October 2008 04:57:07 Jürgen Spitzmüller wrote:
Guenter Milde wrote:
none of e.g.
\includeonly{thermisch}
or
\includeonly{Thermisch/thermisch}
seems to work.
Yes. This doesn't work with LyX, unfortunately.
Is there some kind of filename mangling when the tex
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main problem in running Lyx (or Latex) on Linux is the lack of a nice
package manager like Miktex is on Windows.
I heard that TexLive has a package manager, but I have not been able to
find it.
Can
On Tuesday 24 February 2009 10:38:50 Ehud Kaplan wrote:
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main problem in running Lyx (or Latex) on Linux is the lack of a nice
package manager like Miktex is on Windows.
I heard that TexLive has a
By the way-- if I chose to install texlive from the ISO image, do I need
to uninstall the previous version?
Stefano Franchi wrote:
On Tuesday 24 February 2009 10:38:50 Ehud Kaplan wrote:
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main
I am starting to work on the final editing of a long manuscript and I would
very much appreciate the option to click on a page in the pdf viewer app and
jump directly to the corresponding block of text in the source file.
I do not think this is possible with LyX, presently---am I wrong?
If
Stefano Franchi wrote:
I am starting to work on the final editing of a long manuscript and I would
very much appreciate the option to click on a page in the pdf viewer app and
jump directly to the corresponding block of text in the source file.
I do not think this is possible with LyX,
Just reporting that I use the following in the Preamble which gives nice
mini-tables:
% Mini Table of Contents
% package: minitoc (aka mini-table)
\usepackage{minitoc}
% title of minitoc
% e.g. for Overview use \mtcsettitle{minitoc}{Overview}
% for empty title
\mtcsettitle{minitoc}{}
% turn
On Tuesday 24 February 2009 11:42:30 Pavel Sanda wrote:
Stefano Franchi wrote:
I am starting to work on the final editing of a long manuscript and I
would very much appreciate the option to click on a page in the pdf
viewer app and jump directly to the corresponding block of text in the
Stefano Franchi wrote:
On Tuesday 24 February 2009 11:42:30 Pavel Sanda wrote:
Stefano Franchi wrote:
I am starting to work on the final editing of a long manuscript and I
would very much appreciate the option to click on a page in the pdf
viewer app and jump directly to the
Nina,
you might have solved your problem in the meantime. If not, just one thought:
What happens, if you take out the Bibliography at the end of you document and
run it again? If a reference is the offending part, it should run. Are you
incidently using koma-script and two column page style? I
Stefano Franchi wrote:
If I understood the bugzilla exchange correctly, the situation is:
1. Reverse seaerching (I guess that's the term) works from kdvi to a Latex file
opened in a standard editor
It works on the Mac using Skim as pdf-viewer and pdfsync (no
synctex-support as of now in
Konrad Hofbauer wrote:
Stefano Franchi wrote:
If I understood the bugzilla exchange correctly, the situation is:
1. Reverse seaerching (I guess that's the term) works from kdvi to a Latex
file opened in a standard editor
It works on the Mac using Skim as pdf-viewer and pdfsync (no
Pavel Sanda wrote:
lyxeditor @file @line
The same should be possible with any other better DVI/PDF viewer. So in LyX
the necessary infrastructure is there (at least on Mac and Linux).
you claim this works out of the box? havent you changed your convertor scripts
/ document header or
I don't think this has been answered before, but I am running into an 'error
undefined' problem when trying to export to pdf. I have placed the
\counterwithin{figure}{section} to the preamble and selected the AMS package
as I should, I was able to get \numberwithin{equation}{section} to work
Pavel Sanda wrote:
anyway the same seems to be doable in linux as well with some kind of tweaking
around. one need to use xdvi and pass some external script which sends
proper server-goto-file-row lfun to lyx.
or even simpler: lyxclient -g file line
pavel
On Tue, Feb 24, 2009 at 3:24 PM, Makhoma j.d.woo...@gmail.com wrote:
I don't think this has been answered before, but I am running into an 'error
undefined' problem when trying to export to pdf. I have placed the
\counterwithin{figure}{section} to the preamble and selected the AMS package
as
Thank you everyone. I found the error. Really I needed a deep breath. The
problem was in the figures. When I inserted the figures (I had a lot of pair of
figures (subfigures) like floating) I used the lyx 1.44 and I couldn't center
all the figures editing the preamble, so I marked every pairs of
Stefano Franchi wrote:
On Tuesday 24 February 2009 10:38:50 Ehud Kaplan wrote:
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main problem in running Lyx (or Latex) on Linux is the lack of a nice
package manager like Miktex is on Windows.
I
On Wed, 25 Feb 2009 06:06:09 +0100
Nikos Alexandris nikos.alexand...@felis.uni-freiburg.de wrote:
On Mon, 2009-02-23 at 21:48 -0500, rgheck wrote:
Nikos Alexandris wrote:
On Tue, 2009-02-24 at 09:10 +0800, Waluyo Adi Siswanto wrote:
Yes, I have installed the tex4ht package long
Hi, My footnotes are all coming out in italics when I export to html.
This does not happen with DVI or PDF. But I use html export a lot so
am looking for a solution.
In Preferences File Handling Converters LaTeX - HTML I've been
successfully using htlatex to export html files. And
On 2009-02-25, Typhoon wrote:
And you're sure it's in your path? Basically, the short version
here is: Make sure it works from the command line; if not, it won't
work in LyX; if yes, it should.
LyX uses the oolatex script to export to open document. On my Debian
Lenny, tex4ht is in the
On Tuesday 24 February 2009, Paul A. Rubin wrote:
Kenward Vaughan wrote:
Sorry, I don't know whether this is LyX or LaTeX. When I print out
documents generated by LyX, I see weird marks on the paper not seen
in the screen copy. They are horizontal, very small, and seem to
...
Can you post
On 2009-02-24, Rudi Gaelzer wrote:
On Friday 17 October 2008 04:57:07 Jürgen Spitzmüller wrote:
Guenter Milde wrote:
none of e.g.
\includeonly{thermisch}
or
\includeonly{Thermisch/thermisch}
seems to work.
Yes. This doesn't work with LyX, unfortunately.
Is there some kind
Hello all,
I have a big problem... My thesis is finished and I cannot compile the complete
pdf. When I export to pdf (any option) I only export 52 pages. My thesis is 350
pages more or less... but I cannot compile the complete one. The list of
contents, figures and tables doesn't appears either.
If the Mathcad proram can output XML, there might be a chance to use that. I
found a lot of texts about using TeX for outputting XML, but very few for
inputting XML in TeX. The best references are:
Numerical Algorithms Group (NAG)
xmltex: A non validating (and not 100% conforming) namespace
NinaNutz lamari...@... writes:
I tried to uninstall and reinstall the previous version 1.5.6 and it happens the
same...
I really don't know what to do...
NinaNutz lamari...@... writes:
I tried to uninstall and reinstall the previous version 1.5.6 and it
happens the same...
I really don't know what to do...
Isn't there something strange at the 53th page. Look for possible
sources of error there.
Otherwise try to compile the document from the
NinaNutz wrote:
I have a big problem... My thesis is finished and I cannot compile the complete
pdf. When I export to pdf (any option) I only export 52 pages. My thesis is 350
pages more or less... but I cannot compile the complete one. The list of
contents, figures and tables doesn't appears
On 2009-02-24, Laser Yuan wrote:
I need to write an description for an algorithm in my paper, which includes
several steps . Basically the Enumerate style will fit my purpose. Except
that I want a sequence like this:
Step 1 ...
...
Step 2
...
instead of
1.
On 2009-02-23, Nikos Alexandris wrote:
On Mon, 2009-02-23 at 08:12 +, Guenter Milde wrote:
On 2009-02-22, Nikos Alexandris wrote:
I guess it's a font-specific issue. Too bad because Bera looks great.
Txtt:
Set the typewriter font to Default in the GUI and write in the preamble
On 2009-02-23, Dotan Cohen wrote:
For LyX (or LaTeX) it is important to know in what language you are
writing. Not only the directionality, but also font encoding (while LyX
uses Unicode by now, LaTeX does not) and hyphenation depend on this.
I see, I did not realize that LaTeX does not
On 2009-02-23, Nikos Alexandris wrote:
On Mon, 2009-02-23 at 07:27 +, Guenter Milde wrote:
IMO, there is room for a better UI than hiding language switching
under EditText-StyleCustom.
Also, the apply last style button would become more useful if it would
not mix change of font size
Thanks, Gunter. I will put some time into this.
--
Dotan Cohen
http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת
ا-ب-ت-ث-ج-ح-خ-د-ذ-ر-ز-س-ش-ص-ض-ط-ظ-ع-غ-ف-ق-ك-ل-م-ن-ه-و-ي
А-Б-В-Г-Д-Е-Ё-Ж-З-И-Й-К-Л-М-Н-О-П-Р-С-Т-У-Ф-Х-Ц-Ч-Ш-Щ-Ъ-Ы-Ь-Э-Ю-Я
+1 (from an end-user) for a separate _language_ button.
So who is going to file an enhancement request to bugzilla.lyx.org?
Give me a few minutes...
--
Dotan Cohen
http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת
+1 (from an end-user) for a separate _language_ button.
So who is going to file an enhancement request to bugzilla.lyx.org?
Give me a few minutes...
Please, explain exactly how you see this..
..then implementing this would me much faster.
Where do you set the languages used in
Hi all!
[Using LyX 1.6.1 under Ubuntu II/ 64-bit, book(KOMA-Script)]
I've decided to use the minitoc package. I would like to have (as many
others would like to have :-) a _SectionToC_ for each Chapter (except
the 1st) in the beginning, of course, of each Chapter, listing Sections
(x.x) and
On Mon, 2009-02-23 at 11:20 +0100, Manveru wrote:
2009/2/22 Nikos Alexandris nikos.alexand...@felis.uni-freiburg.de:
[ I am posting a listing-related problem here instead of starting a new
thread. ]
I now realise how powerful is the listing package. I used some R code
and setting the
Nikos:
I guess it's a font-specific issue. Too bad because Bera looks great.
Guenter:
Txtt:
Set the typewriter font to Default in the GUI and write in the preamble
\renewcommand{\ttdefault}{txtt}
Nikos:
Not bad (the font in general). Yet:
i. the backticks still look like ticks
Please, explain exactly how you see this..
..then implementing this would me much faster.
Where do you set the languages used in toggling ?
Should this be stored in the LyX file ?
Vincent
I would imagine a button on the toolbar, that would toggle between
preconfigured input languages.
I am testing the \mtcaddchapter command. I'll probably figure this out.
If not I will _bump_ :-p
Sorry the for the mail-traffic, Nikos
Paul A. Rubin ru...@... writes:
Thanks Paul, that works fine.
I was using float.
Graham
My apologies if this has been asked before, but I couldn't find anything
directly relevant in the archives. I'm hitting a problem with IEEEtran and
LyX; it would be great if anyone could help to work out whether it is a
problem in what I'm doing, or perhaps a bug. I should add that I'm
reasonably
Pol wrote:
While the single arrow in command
\xymatrix{A \ar[r] B}
is displayed by lyx, three arrow graph in command
\xymatrix{ p,a \\ p \ar[r] \ar[ur] \ar[dr] p,n \\ p,e }
is undisplayed (yet correctly printed out)
Any ideas?
Any matrix or array specifications needed in the preamble?
Kenward Vaughan wrote:
Sorry, I don't know whether this is LyX or LaTeX. When I print out
documents generated by LyX, I see weird marks on the paper not seen in
the screen copy. They are horizontal, very small, and seem to mark the
heights of (some of) the characters on the page. Those capitals
On 2009-02-24, Dotan Cohen wrote:
Please, explain exactly how you see this..
..then implementing this would me much faster.
Where do you set the languages used in toggling ?
Should this be stored in the LyX file ?
I would imagine a button on the toolbar, that would toggle between
On Tuesday 24 February 2009 09:06:47 am Nikos Alexandris wrote:
Hi all!
[Using LyX 1.6.1 under Ubuntu II/ 64-bit, book(KOMA-Script)]
I've decided to use the minitoc package. I would like to have (as many
others would like to have :-) a _SectionToC_ for each Chapter (except
the 1st) in the
On Tue, 2009-02-24 at 11:17 -0500, Steve Litt wrote:
On Tuesday 24 February 2009 09:06:47 am Nikos Alexandris wrote:
Hi all!
[Using LyX 1.6.1 under Ubuntu II/ 64-bit, book(KOMA-Script)]
I've decided to use the minitoc package. I would like to have (as many
others would like to have
On Tuesday 24 February 2009 06:04:36 am NinaNutz wrote:
Hello all,
I have a big problem... My thesis is finished and I cannot compile the
complete pdf. When I export to pdf (any option) I only export 52 pages. My
thesis is 350 pages more or less... but I cannot compile the complete one.
The
On Friday 17 October 2008 04:57:07 Jürgen Spitzmüller wrote:
Guenter Milde wrote:
none of e.g.
\includeonly{thermisch}
or
\includeonly{Thermisch/thermisch}
seems to work.
Yes. This doesn't work with LyX, unfortunately.
Is there some kind of filename mangling when the tex
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main problem in running Lyx (or Latex) on Linux is the lack of a nice
package manager like Miktex is on Windows.
I heard that TexLive has a package manager, but I have not been able to
find it.
Can
On Tuesday 24 February 2009 10:38:50 Ehud Kaplan wrote:
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main problem in running Lyx (or Latex) on Linux is the lack of a nice
package manager like Miktex is on Windows.
I heard that TexLive has a
By the way-- if I chose to install texlive from the ISO image, do I need
to uninstall the previous version?
Stefano Franchi wrote:
On Tuesday 24 February 2009 10:38:50 Ehud Kaplan wrote:
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main
I am starting to work on the final editing of a long manuscript and I would
very much appreciate the option to click on a page in the pdf viewer app and
jump directly to the corresponding block of text in the source file.
I do not think this is possible with LyX, presently---am I wrong?
If
Stefano Franchi wrote:
I am starting to work on the final editing of a long manuscript and I would
very much appreciate the option to click on a page in the pdf viewer app and
jump directly to the corresponding block of text in the source file.
I do not think this is possible with LyX,
Just reporting that I use the following in the Preamble which gives nice
mini-tables:
% Mini Table of Contents
% package: minitoc (aka mini-table)
\usepackage{minitoc}
% title of minitoc
% e.g. for Overview use \mtcsettitle{minitoc}{Overview}
% for empty title
\mtcsettitle{minitoc}{}
% turn
On Tuesday 24 February 2009 11:42:30 Pavel Sanda wrote:
Stefano Franchi wrote:
I am starting to work on the final editing of a long manuscript and I
would very much appreciate the option to click on a page in the pdf
viewer app and jump directly to the corresponding block of text in the
Stefano Franchi wrote:
On Tuesday 24 February 2009 11:42:30 Pavel Sanda wrote:
Stefano Franchi wrote:
I am starting to work on the final editing of a long manuscript and I
would very much appreciate the option to click on a page in the pdf
viewer app and jump directly to the
Nina,
you might have solved your problem in the meantime. If not, just one thought:
What happens, if you take out the Bibliography at the end of you document and
run it again? If a reference is the offending part, it should run. Are you
incidently using koma-script and two column page style? I
Stefano Franchi wrote:
If I understood the bugzilla exchange correctly, the situation is:
1. Reverse seaerching (I guess that's the term) works from kdvi to a Latex file
opened in a standard editor
It works on the Mac using Skim as pdf-viewer and pdfsync (no
synctex-support as of now in
Konrad Hofbauer wrote:
Stefano Franchi wrote:
If I understood the bugzilla exchange correctly, the situation is:
1. Reverse seaerching (I guess that's the term) works from kdvi to a Latex
file opened in a standard editor
It works on the Mac using Skim as pdf-viewer and pdfsync (no
Pavel Sanda wrote:
lyxeditor @file @line
The same should be possible with any other better DVI/PDF viewer. So in LyX
the necessary infrastructure is there (at least on Mac and Linux).
you claim this works out of the box? havent you changed your convertor scripts
/ document header or
I don't think this has been answered before, but I am running into an 'error
undefined' problem when trying to export to pdf. I have placed the
\counterwithin{figure}{section} to the preamble and selected the AMS package
as I should, I was able to get \numberwithin{equation}{section} to work
Pavel Sanda wrote:
anyway the same seems to be doable in linux as well with some kind of tweaking
around. one need to use xdvi and pass some external script which sends
proper server-goto-file-row lfun to lyx.
or even simpler: lyxclient -g file line
pavel
On Tue, Feb 24, 2009 at 3:24 PM, Makhoma j.d.woo...@gmail.com wrote:
I don't think this has been answered before, but I am running into an 'error
undefined' problem when trying to export to pdf. I have placed the
\counterwithin{figure}{section} to the preamble and selected the AMS package
as
Thank you everyone. I found the error. Really I needed a deep breath. The
problem was in the figures. When I inserted the figures (I had a lot of pair of
figures (subfigures) like floating) I used the lyx 1.44 and I couldn't center
all the figures editing the preamble, so I marked every pairs of
Stefano Franchi wrote:
On Tuesday 24 February 2009 10:38:50 Ehud Kaplan wrote:
I realize that this is not a specific Lyx question, but someone here
might know the answer.
My main problem in running Lyx (or Latex) on Linux is the lack of a nice
package manager like Miktex is on Windows.
I
On Wed, 25 Feb 2009 06:06:09 +0100
Nikos Alexandris nikos.alexand...@felis.uni-freiburg.de wrote:
On Mon, 2009-02-23 at 21:48 -0500, rgheck wrote:
Nikos Alexandris wrote:
On Tue, 2009-02-24 at 09:10 +0800, Waluyo Adi Siswanto wrote:
Yes, I have installed the tex4ht package long
Hi, My footnotes are all coming out in italics when I export to html.
This does not happen with DVI or PDF. But I use html export a lot so
am looking for a solution.
In Preferences File Handling Converters LaTeX - HTML I've been
successfully using htlatex to export html files. And
On 2009-02-25, Typhoon wrote:
And you're sure it's in your path? Basically, the short version
here is: Make sure it works from the command line; if not, it won't
work in LyX; if yes, it should.
LyX uses the oolatex script to export to open document. On my Debian
Lenny, tex4ht is in the
On Tuesday 24 February 2009, Paul A. Rubin wrote:
Kenward Vaughan wrote:
Sorry, I don't know whether this is LyX or LaTeX. When I print out
documents generated by LyX, I see weird marks on the paper not seen
in the screen copy. They are horizontal, very small, and seem to
...
Can you post
On 2009-02-24, Rudi Gaelzer wrote:
On Friday 17 October 2008 04:57:07 Jürgen Spitzmüller wrote:
Guenter Milde wrote:
none of e.g.
\includeonly{thermisch}
or
\includeonly{Thermisch/thermisch}
seems to work.
Yes. This doesn't work with LyX, unfortunately.
Is there some kind
Hello all,
I have a big problem... My thesis is finished and I cannot compile the complete
pdf. When I export to pdf (any option) I only export 52 pages. My thesis is 350
pages more or less... but I cannot compile the complete one. The list of
contents, figures and tables doesn't appears either.
If the Mathcad proram can output XML, there might be a chance to use that. I
found a lot of texts about using TeX for outputting XML, but very few for
inputting XML in TeX. The best references are:
Numerical Algorithms Group (NAG)
xmltex: A non validating (and not 100% conforming) namespace
NinaNutz writes:
I tried to uninstall and reinstall the previous version 1.5.6 and it happens the
same...
I really don't know what to do...
>NinaNutz writes:
>
>I tried to uninstall and reinstall the previous version 1.5.6 and it
happens the same...
>
>I really don't know what to do...
>
Isn't there something strange at the 53th page. Look for possible
sources of error there.
Otherwise try to compile the document
1 - 100 of 144 matches
Mail list logo