Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread MG
on the board. A loose wire can make a buzzing noise when the power sparks across the gap. Check all the contacts in the plug on the back of the board. Manfred Message: 7 Date: Fri, 7 Aug 2009 16:47:28 -0400 From: Bill R billr32...@comcast.net Subject: Re: [MBZ] Dash console dead - 1981 300SD Guess

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread Bill R
-Original Message- From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On Behalf Of MG Sent: Saturday, August 08, 2009 8:09 AM To: Mercedes Discussion List Subject: Re: [MBZ] Dash console dead - 1981 300SD Maybe a relay problem since it changes when you messed

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread j...@windwireless.net
From: Bill R billr32...@comcast.net Sent: Saturday, August 08, 2009 6:12 AM To: Mercedes Discussion List mercedes@okiebenz.com Subject: Re: [MBZ] Dash console dead - 1981 300SD I didn't know the relays were interchangeable. I had noticed that there seems to be more pins than metal

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread WILTON
Finding a parasitic leak = real fun. ; Wilton - Original Message - From: j...@windwireless.net To: Mercedes Discussion List mercedes@okiebenz.com Sent: Saturday, August 08, 2009 11:06 AM Subject: Re: [MBZ] Dash console dead - 1981 300SD The flasher will whine/buzz

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread Bill R
, August 08, 2009 11:07 AM To: Mercedes Discussion List Subject: Re: [MBZ] Dash console dead - 1981 300SD The flasher will whine/buzz if there's a load on it even when the switch (to the lamps) is off. I found this out when I hooked up an auxiliary clacker relay in the SL, but did it 'wrong

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread Barry Stark
Bill - After a quick review of the ECM, The power for most of the cluster, but not the clock, comes from fuse F12. Have you replaced that fuse? If that doesn't help remove the cluster and probe socket #7 of the round connector for 12V. The key needs to be in the run or start position for F12 to

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread Bill R
Message- From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Barry Stark Sent: Saturday, August 08, 2009 2:58 PM To: 'Mercedes Discussion List' Subject: Re: [MBZ] Dash console dead - 1981 300SD Bill - After a quick review of the ECM, The power for most

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread Barry Stark
Bill - As Marshall used to say, it is best just to replace them. If you get continuity it is a good sign and probably means it is ok but you can get continuity across a hair fine wire but it won't carry any current. If you must keep the fuse take it out and make sure the conductor isn't cracked

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-08 Thread Bill R
Discussion List' Subject: Re: [MBZ] Dash console dead - 1981 300SD Bill - As Marshall used to say, it is best just to replace them. If you get continuity it is a good sign and probably means it is ok but you can get continuity across a hair fine wire but it won't carry any current. If you must

[MBZ] Dash console dead - 1981 300SD

2009-08-07 Thread Bill R
I did it to myself, though I am not exactly sure of the part I screwed up. For the past three years I have had an intermittent buzz [like a single strand of a wire shorting out at times] on the blinker. It would be good while flashing, but hum/buzz at times, and it's extreme was to make a

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-07 Thread Bill R
: Friday, August 07, 2009 3:42 PM To: 'Mercedes Discussion List' Subject: [MBZ] Dash console dead - 1981 300SD I did it to myself, though I am not exactly sure of the part I screwed up. For the past three years I have had an intermittent buzz [like a single strand of a wire shorting out at times

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-07 Thread WILTON
Oh, you mean instrument cluster? Wilton - Original Message - From: Bill R billr32...@comcast.net To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Friday, August 07, 2009 4:47 PM Subject: Re: [MBZ] Dash console dead - 1981 300SD Guess I should get a bit more specific

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-07 Thread Bill R
Discussion List Subject: Re: [MBZ] Dash console dead - 1981 300SD Oh, you mean instrument cluster? Wilton - Original Message - From: Bill R billr32...@comcast.net To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Friday, August 07, 2009 4:47 PM Subject: Re: [MBZ] Dash console

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-07 Thread WILTON
Me, too. ; Wilton - Original Message - From: Bill R billr32...@comcast.net To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Friday, August 07, 2009 5:31 PM Subject: Re: [MBZ] Dash console dead - 1981 300SD Yes. I am at an age when the correct term doesn't always

Re: [MBZ] Dash console dead - 1981 300SD

2009-08-07 Thread OK Don
I'd start looking at/cleaning and tighening all the ground connections I could find --- On Fri, Aug 7, 2009 at 3:47 PM, Bill R billr32...@comcast.net wrote: Guess I should get a bit more specific. The temp, fuel, oil pressure [pegged at the top] speedo, tach and blinkers are dead. The clock.