Glad you are okay. It's never a good thing to total out a car, but it's always
a good thing to be able to walk away from the wreck.
Rick
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
“Bagging” aside, why would someone go to the expense of having a dealer rebuild
an engine and not clean up the engine compartment and related stuff while the
engine is out of the car?
???
-D
> On Jul 17, 2019, at 10:32 PM, Dwight Giles via Mercedes
> wrote:
>
> Sick. Capital offense.
>
>
Thanks.
I pulled the pass door open yesterday, it was hanging on the fender just
a bit, wasn't sprung, closed OK. Got me wondering now if the thing
might actually be fixable. That might just be the fender mashed back
from the hit. Engine wouldn't turn over, I'm wondering if when the
That would be hilarious.
They made (or make maybe still) even smaller engines for the rest of the world.
I'm pretty sure there are even 3 cylinder versions...
I ended up giving away the '98 just to get rid of it but I really wanted to
keep the engine and put it in something like a CJ5...
-Curt
> https://www.ebay.com/itm/1975-Mercedes-Benz-200-Series-240D/254300506170?hash=item3b357dc83a:g:pHEAAOSwebpdIP9e
Don't know what's up with that AC unit. It has the big hump console of factory
AC,
which my 200D W115 does not have, _and_ the aftermarket hang-under-the-dash
unit.
-- Jim
YES! That would be nice, of course, didn't someone put an Allison V12 into
(or under) one in the '60's?
On Wed, Jul 17, 2019 at 9:03 PM Kevin Kraly via Mercedes <
mercedes@okiebenz.com> wrote:
> It would be nice to install a TDI in my nephew’s little 1960 Nash
> Metropolitan!!
> Kevin in
I had made a mistake, I just put 9 liters of gas in my car. I know a bit
of gas is ok, but 9 liters ?? I had made a mistake, I just put 9 liters
of gas in my car. I know a bit of gas is ok, but 9 liters ?? What do you
think ?
--
--FT
___
Just put a saddle on the engine...
Actually, that'd be kinda cool, get one of those massive Detroit engines like
the 16cyl Deboss blew up. Make a wheeled chassis and put a saddle on the
engine. Figure out a way to have reins for controls. It'd be a hot ride
though...
-Curt
On Thursday,
> I had made a mistake, I just put 9 liters of gas in my car. I know a bit of
> gas is ok, but 9 liters ??
Most of my cars would prefer a lot more than that. I'm afraid I'm not seeing
the problem.
-- Jim
___
http://www.okiebenz.com
To search list
GM has bungled the Cruze diesel almost as badly as they did diesel cars in the
late '70s. The difference being that this was marketing bungling vs just bad
engines the first time around.
The original Cruze diesel was a top end car, no manual transmission, all the
bells and whistles, that they
You are if it’s a diesel.
This is one of the posts form the W123 FB page.
-D
> On Jul 18, 2019, at 11:02 AM, Jim Cathey via Mercedes
> wrote:
>
>> I had made a mistake, I just put 9 liters of gas in my car. I know a bit of
>> gas is ok, but 9 liters ??
>
> Most of my cars would prefer a
If it was a VW, 2006 or newer it'd be time to pump the tank and purge the
lines before you ever thought of starting the car. Any gasoline in the tank at
all will kill the $$$ high pressure fuel pump. At 2000+ psi it requires diesel
fuel for lubrication. As you probably know fuel in North
The 1.4 TDI Polo is a three cylinder.
I wonder if it shares any parts with the 1.9 four cylinder.
> On July 18, 2019 at 10:02 AM Curt Raymond via Mercedes
> wrote:
>
>
> That would be hilarious.
> They made (or make maybe still) even smaller engines for the rest of the
> world. I'm pretty
Detroit Diesel 20V-149. That’s what you need. We used these on very large (2mW)
generator sets. One big, honkin’ engine. Sucked fuel so badly you could watch
the level in the day tank drop when they were running under load.
Here’s a link to a picture of one with six guys in front of it to give
Over $22k and climbing despite a variety of cosmetic issues. I don't get
it.
https://bringatrailer.com/listing/1976-datsun-280z-20/?utm_source=dailymail_medium=email_campaign=2019-07-18
___
http://www.okiebenz.com
To search list archives
Looks a little rough but might be a good deal to the right buyer
https://www.facebook.com/marketplace/item/462005421045836/
1992 Mercedes-Benz G-Wagon 2dr
Charleston, SC·
$15,000
* About This Vehicle
*
o
o Driven 120,000 miles
*
o
o Automatic transmission
*
o
Hard to find fault with this one. Current $12k bid price is a bargain.
https://bringatrailer.com/listing/1985-mercedes-benz-300td-turbo-17/?utm_source=dailymail_medium=email_campaign=2019-07-18
___
http://www.okiebenz.com
To search list archives
https://www.facebook.com/marketplace/item/383579148959797/
Doesn't look too bad, wonder what would be involved in sourcing a 4matic
tranny
--
--FT
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
> You are if it’s a diesel.
Might be nice to give that information as well.
My wife filled up our W123 300D with gasoline. She was able to drive to the
neighbor's,
and called me. Eventually I figured out the problem, and drove it the rest of
the way home,
it would run but wouldn't idle. I
Mitch Haley via Mercedes writes:
> Metro would need a tiny diesel, like a VW TDI or a 1.6L Clean Turbo
> Diesel (CTD). Unfortunately, General Motors, after totally failing to
> advertise or try to sell the 1.6 CTD for three years, has announced
> that it won't be available in 2020 Equinox or
Functional or tasteless?
https://bringatrailer.com/listing/1983-mercedes-benz-240d-10/?utm_source=dailymail_medium=email_campaign=2019-07-18
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
They put a diesel in the Colorado/Canyon also. Unless you're into diesel
pickups you've probably never heard of it...
-Curt
On Thursday, July 18, 2019, 11:40:34 AM EDT, Allan Streib via Mercedes
wrote:
Mitch Haley via Mercedes writes:
> Metro would need a tiny diesel, like a VW TDI
The FB group is full of excellent knowledge from Alex, a world-renowned
123 expert who has watched a lot of youtube vids
--FT
On 7/18/19 11:39 AM, Jim Cathey via Mercedes wrote:
You are if it’s a diesel.
Might be nice to give that information as well.
My wife filled up our W123 300D with
Time to create the wreck in reverse.
Unbolt the hood, once you get it open, Pull the front grill and bumper, so
you can get to the frame structure and have a good look for wrinkled paint
[indicates frame bends, if any] Drill 3/8 hole where the sheet metal needs
pulled forward, put a metal plate
Looks like a 722.6 so nothing too exotic, but i wonder if the 4matic
particular format is different from a run-of-the-mill 722.6
i vaguely recall some discussion of this in the list?
--FT
On 7/18/19 11:37 AM, Floyd Thursby wrote:
https://www.facebook.com/marketplace/item/383579148959797/
Sun Valley doesn’t show anything for that application, but for other models of
the 722.6xx of that vintage they want $2500 exchange with a new torque
converter.
-D
> On Jul 18, 2019, at 11:59 AM, Floyd Thursby via Mercedes
> wrote:
>
> Looks like a 722.6 so nothing too exotic, but i
The dickweed quotient is a lot lower than I thought it would be, however, based
on some of the stuff you guys have been posting. For the most part the members
seem to be pretty decent folk and not at all goofy.
-D
> On Jul 18, 2019, at 11:53 AM, Floyd Thursby via Mercedes
> wrote:
>
> The
Detroit engine name system is:
20 = Number of cylinders
V = V configuration
149 = Cubic inches of displacement PER cylinder...
One big honking engine fuel burn would be in Gallons per Mile
rather than Miles per Gallon... but you could "roll coal" better than
any of the other bubbas at
Haven't seen any reported transmission issues so far, just flywheel issues on
stick shifts.
Actual engine issues seem to be unheard of, all the failures are in the post
2010 style diesel emissions controls.
The 2017-2019 aluminum block 1.6L has had a lot less emissions control system
issues
If I accidentally put 9 liters of gas in my 300SD, I'd put away the gas nozzle,
stick the diesel nozzle in the car, and fill her up. 9L of gas and 18gal of
diesel in a 617 scares me not at all.
Mitch.
> On July 18, 2019 at 11:21 AM Curt Raymond via Mercedes
> wrote:
>
>
> If it was a
I was just looking on TDIClub and somebody has done 67mpg in real world
driving with a 2013. The 2015 has a different engine and should do slightly
better. Best I've done so far was 56 or so. Thats to work and back which is an
elevation change of 600 feet. I think it was 65 on the way to work
Mitch needs to do this to his car to get some serious mileage numbers:
https://izismile.com/2009/12/30/little_tuning_for_a_small_car_and_as_a_result_a_big_fuel_economy_8_pics.html
-D
> On Jul 18, 2019, at 12:06 PM, Mitch Haley via Mercedes
> wrote:
>
> Haven't seen any reported
Yup. I ran all sorts of things in 616 engines, some vegetable oil, motor oil,
kerosene, just a little gasoline one winter...
-Curt
On Thursday, July 18, 2019, 12:12:59 PM EDT, Mitch Haley via Mercedes
wrote:
If I accidentally put 9 liters of gas in my 300SD, I'd put away the gas
I wondered about that too. Maybe a cheaper fix than doing it like it
should be?
On 18/07/2019 9:31 AM, Jim Cathey via Mercedes wrote:
https://www.ebay.com/itm/1975-Mercedes-Benz-200-Series-240D/254300506170?hash=item3b357dc83a:g:pHEAAOSwebpdIP9e
Don't know what's up with that AC unit. It has
Hahaha I saw that
Sent from my iPhone
> On Jul 18, 2019, at 9:41 AM, Floyd Thursby via Mercedes
> wrote:
>
> I had made a mistake, I just put 9 liters of gas in my car. I know a bit of
> gas is ok, but 9 liters ?? I had made a mistake, I just put 9 liters of gas
> in my car. I know a bit of
On 18/07/2019 9:41 AM, Floyd Thursby via Mercedes wrote:
I had made a mistake, I just put 9 liters of gas in my car. I know a
bit of gas is ok, but 9 liters ?? I had made a mistake, I just put 9
liters of gas in my car. I know a bit of gas is ok, but 9 liters ??
What do you think ?
Add 5
I suppose you could shake some extra salt into it, that'd make the gas bind to
the oil better, sure, thats the ticket...
-Curt
On Thursday, July 18, 2019, 12:43:05 PM EDT, Randy Bennell via Mercedes
wrote:
On 18/07/2019 9:41 AM, Floyd Thursby via Mercedes wrote:
> I had made a
The problem with him is not the bad advice, but he doesn’t know what he doesn’t
know and his followers think he is a god
Sent from my iPhone
> On Jul 18, 2019, at 10:53 AM, Floyd Thursby via Mercedes
> wrote:
>
> The FB group is full of excellent knowledge from Alex, a world-renowned 123
>
I got the guy's contact info, gonna try to find out what it wrong with
it. If the cases are the same on all these, I could swap the tranny out
of the $500E300 into it easy enough, or hell drop the engine too, have a
211 diesel. I wonder if that would work.
--FT
On 7/18/19 12:03 PM, Dan
I do believe the last year for the 722.6 is 05.
Sent from my iPhone
> On Jul 18, 2019, at 11:47 AM, Floyd Thursby via Mercedes
> wrote:
>
> I got the guy's contact info, gonna try to find out what it wrong with it. If
> the cases are the same on all these, I could swap the tranny out of the
On 18/07/2019 11:46 AM, Kaleb Striplin via Mercedes wrote:
The problem with him is not the bad advice, but he doesn’t know what he doesn’t
know and his followers think he is a god
You talking about Trump?
(yeah, yeah, I know, no political crap, take to banned etc, but after
reading the
I am wanting to get my AC going in my W116 300SD. Has not worked since I
got it. From what I can tell, the compressor is totally siezed, and I
have the belt removed.
These are an "upside down" GM compressor is that right? Are there
better options e.g. Sanden or something else?
What else should I
Hey Allan,
When you find a compressor I know a lot of the R12 guys are using R290 or
in other words, propane and they say it blows ice cubes. Getting ready to
charge my '88 Montero wit it.
Rory
On Thu, Jul 18, 2019 at 10:04 AM Allan Streib via Mercedes <
mercedes@okiebenz.com> wrote:
> I am
On 17/07/2019 10:30 PM, Mitch Haley via Mercedes wrote:
Metro would need a tiny diesel, like a VW TDI or a 1.6L Clean Turbo Diesel
(CTD).
Unfortunately, General Motors, after totally failing to advertise or try to
sell the 1.6 CTD for three years, has announced that it won't be available in
I would rather they fix up and enjoy an old Mercedes even if they sort
of "modernize" it than see it go to the junk yard because someone drove
it into the ground and took no care of it at all because it was just an
old car.
On 17/07/2019 9:32 PM, Dwight Giles via Mercedes wrote:
Sick.
I will add that this car was never "converted" to R134 it still has the
original schrader valves.
Allan
Rory via Mercedes writes:
> Hey Allan,
>
> When you find a compressor I know a lot of the R12 guys are using R290 or
> in other words, propane and they say it blows ice cubes. Getting ready
Yes, correct on the compressor. Upgrade kits for installing a Sanden are
out there (check on Peach Parts forum, I think there is a guy there selling
kits).
Is it possible to get the regular GM compressor and rotate some part (the
front cover?) so it will work "upside down"? Worth looking into.
On Thu, 18 Jul 2019 09:05:22 -0700 G Mann via Mercedes
wrote:
> Detroit engine name system is:
> 20 = Number of cylinders
> V = V configuration
> 149 = Cubic inches of displacement PER cylinder...
> One big honking engine fuel burn would be in Gallons per Mile
> rather than Miles per
I'm getting ready to do this on my W116 300SD as the AC compressor went bad
earlier this year.
My plans are:
1. Remove compressor, expansion valve, and receiver/dryer and flush the
lines, condenser, and evaporator with AC flush solvent.
2. Install new compressor, expansion valve and R/D.
3.
Hence, the thirst for fuel.
On 18/07/2019 12:44 PM, Craig via Mercedes wrote:
On Thu, 18 Jul 2019 09:05:22 -0700 G Mann via Mercedes
wrote:
Detroit engine name system is:
20 = Number of cylinders
V = V configuration
149 = Cubic inches of displacement PER cylinder...
One big honking
And since this is a relatively simple system, I would encourage you to replace
the flexible lines. If they’re the originals they will be porous, and while the
system might hold a charge for a while, it will eventually leak out over few
months. New lines aren’t that expensive, you can get a
> The R4 is not bad, just a little noisy and power hungry.
So, where does the excess energy go? Everything we're talking
about is a displacement pump, using reed valves. The only thing
different is the number, size, and orientation of cylinders. (Ranging
from 2 in the York to 5x2=10 in the
If the compressor is damaged, do yourself a favor and have a filter installed
in the suction line. That will trap any shrapnel floating around, it's
impossible to get it all out. If you don't, the debris will promptly trash the
replacement compressor.
Get all 8 keys for it from the dealer before you pull the motor. You cannot
get keys without a whole car.
On Wed, Jul 17, 2019, 11:01 AM Mitch Haley via Mercedes <
mercedes@okiebenz.com> wrote:
> Pull the engine, transmission, computers, shifter, and all associated
> wiring harnesses.
> Would go
> On July 18, 2019 at 12:46 PM Kaleb Striplin via Mercedes
> wrote:
>
>
> The problem with him is not the bad advice, but he doesn’t know what he
> doesn’t know and his followers think he is a god
So, what were the suggested solutions to the W123 diesel with a couple gallons
of gas in it?
> On July 18, 2019 at 1:11 PM Randy Bennell via Mercedes
> wrote:
> Around here, the engine of choice for a Metropolitan is or at least was,
> a little 4 cylinder Datsun motor. I assume they put the whole engine and
> transmission set up in.
Interesting idea.
IIRC, the 1200, 510,610,710,
On Thu, 18 Jul 2019 11:24:13 -0700 Karl Wittnebel via Mercedes
wrote:
> Get all 8 keys for it from the dealer before you pull the motor. You
> cannot get keys without a whole car.
If he is going to render the car useless by pulling the drivetrain, why
would he need more keys?
Craig
> On
On Thu, 18 Jul 2019 12:59:13 -0500 Peter Frederick via Mercedes
wrote:
> If the compressor is damaged, do yourself a favor and have a filter
> installed in the suction line. That will trap any shrapnel floating
> around, it's impossible to get it all out. If you don't, the debris
> will
Ah sorry. I was thinking it was a 648 for a second.
On Thu, Jul 18, 2019, 11:35 AM Craig via Mercedes
wrote:
> On Thu, 18 Jul 2019 11:24:13 -0700 Karl Wittnebel via Mercedes
> wrote:
>
> > Get all 8 keys for it from the dealer before you pull the motor. You
> > cannot get keys without a whole
Craig via Mercedes writes:
> On Thu, 18 Jul 2019 12:59:13 -0500 Peter Frederick via Mercedes
> wrote:
>
>> If the compressor is damaged, do yourself a favor and have a filter
>> installed in the suction line. That will trap any shrapnel floating
>> around, it's impossible to get it all out.
I am leaning towards keeping R12. If the system doesn't leak, I agree
that it's not a significant cost and that's what it's designed for.
My question on the Sanden vs. original was thinking that perhaps a
modern compressor is better than 1970s technology, from the standpoints
of longevity,
On Thu, 18 Jul 2019 11:41:05 -0700 Karl Wittnebel via Mercedes
wrote:
> Ah sorry. I was thinking it was a 648 for a second.
Pardon my ignorance. What is a 648? Is that OM648 (straight-6 or V?)?
What difference would that make in pulling the drivetrain out of the car?
Craig
> On Thu, Jul
I second this. They’re cheap and it’s excellent insurance. Whenever I replace a
major component I install a filter or inlet screen in the compressor.
-D
> On Jul 18, 2019, at 1:59 PM, Peter Frederick via Mercedes
> wrote:
>
> If the compressor is damaged, do yourself a favor and have a
I suspect Jaime will opt for the York, but in my experience there’s nothing
wrong with the Yorks as they’re pretty bulletproof. I’ve got the original York
on the 220SEb, and it pulls a wicked vacuum and doesn’t bog the engine down,
even at idle.
-D
> On Jul 18, 2019, at 3:02 PM, Allan Streib
Yes, I've replaced Yorks with Sanden compressors in the past. I've also
run cars with original Yorks. Given the choice, I usually go for the York
as they're simple and super reliable. I'd put money on them out living any
Sanden compressor. They are power hungry... I might go for a sanden on a
That ecu wont work without a key, and the motor won't work without an ecu.
So if you pull it for a transplant you need everything. Having extra keys
is mandatory, because once the motor is out you cannot have the vin
verified by the dealer.
On Thu, Jul 18, 2019, 12:05 PM Craig via Mercedes
I have done that. Some BP station where the gas handles were all green. I
just switched to the diesel pump and filled the rest of the tank. The 123
manual even suggests doing this in very cold climates.
On Thu, Jul 18, 2019, 9:12 AM Mitch Haley via Mercedes <
mercedes@okiebenz.com> wrote:
> If I
Jaime Kopchinski via Mercedes writes:
> I'm not sure sure the R4 is as robust, but I do believe those germans knew
> what they were doing when they designed the brackets, pulleys, etc. There
> is so much to consider from an engineering standpoint that isn't
> necessarily considered when
I would sort of take exception to this….
I say that because you don’t have to bring the vehicle in to the dealer to get
a replacement key, you just have to show ownership. A title and your driver’s
license is all that’s necessary. I would say registration, but if you parted
the car you
Probably depends upon the dealer but some of them want to see the car and
verify the vin.
On Thu, Jul 18, 2019, 12:41 PM Dan Penoff via Mercedes <
mercedes@okiebenz.com> wrote:
> I would sort of take exception to this….
>
> I say that because you don’t have to bring the vehicle in to the dealer
Wouldnt be possible if you lost your only key, so Dan must be correct.
On Thu, Jul 18, 2019, 12:46 PM Karl Wittnebel wrote:
> Probably depends upon the dealer but some of them want to see the car and
> verify the vin.
>
> On Thu, Jul 18, 2019, 12:41 PM Dan Penoff via Mercedes <
>
Since it’s not currently in play, take it off and disassemble it. You have
nothing to lose at this point….
Most of these are pretty simple devices and easy to disassemble. In some cases
you can even obtain replacement parts, too.
While it’s a totally different compressor, I’ve rebuilt
I guess there might be dealers that want to see the car, but I would think that
is the exception rather than the rule. Consider how many instances where it
wouldn’t be possible to bring the car in, or what an inconvenience it would be.
I’m sure that policy would get hammered after MBUSA got a
Is it possible to get parts for a York and rebuild it?
On 18/07/2019 2:24 PM, Jaime Kopchinski via Mercedes wrote:
Yes, I've replaced Yorks with Sanden compressors in the past. I've also
run cars with original Yorks. Given the choice, I usually go for the York
as they're simple and super
Certainly!
For example:
https://www.shopcenturyautoair.com/store/c20/York.html
-D
> On Jul 18, 2019, at 3:59 PM, Randy Bennell via Mercedes
> wrote:
>
> Is it possible to get parts for a York and rebuild it?
>
>
> On 18/07/2019 2:24 PM, Jaime Kopchinski via Mercedes wrote:
>> Yes, I've
Is there no immobilizer delete available for MBs? This is a pretty common TDI
thing for engine transplants.I'd always figured you could just shove the ECU
key up under the dash and leave it there, the passive electronics in the
transponder last pretty well.
-Curt
On Thursday, July 18,
Not to my knowledge, at least not without a major expense. I believe, and I’ll
certainly defer to those more familiar with it, that the EIS system is pretty
tough to crack. There are companies in Europe that ell workarounds but they’re
very expensive.
-D
> On Jul 18, 2019, at 4:08 PM, Curt
I am no expert on these things. Do they have valves similar to the thin
reed valve type things in air compressors? I have been told that the
valves in my York are suspect as the compressor clutch kicks in and the
pump runs but it does not compress as the pressure levels on high and
low are
They have a “valve plate” that has some circular discs that act as valves. I’m
not sure that they’re reed valves in that sense.
-D
> On Jul 18, 2019, at 4:16 PM, Randy Bennell via Mercedes
> wrote:
>
> I am no expert on these things. Do they have valves similar to the thin reed
> valve
No delete. There are other custom ecu solutions but nothing cheap. Just to
get it running in a new chassis with the original key is tricky.
On Thu, Jul 18, 2019, 1:12 PM Dan Penoff via Mercedes
wrote:
> Not to my knowledge, at least not without a major expense. I believe, and
> I’ll certainly
On 18/07/2019 3:32 PM, Dan Penoff via Mercedes wrote:
They have a “valve plate” that has some circular discs that act as valves. I’m
not sure that they’re reed valves in that sense.
-D
Sounds similar. Thin metal that opens and closes.
___
> Dan wrote:
> Detroit Diesel 20V-149.
That would be a supercharged (roots type blower) for the 2-stroke,
and I think they were often turbochanged too.
I like Curt's idea of a saddle...
Looked it up.
Introduced in 1966 without a turbo with a rating of 50 hp (37 kW)
per cylinder.
When
So this guy has this car listed with 1 pic and very little details. I
send him a message asking for additional photos and what the issues
are. He says it has some rust and dent and a window off track. I then
ask him again for additional photos of the rust areas and interior. He
responds
Greenfield, IN. That’s Bubba territory, just east of Indianapolis.
-D
> On Jul 18, 2019, at 6:24 PM, Kaleb C. Striplin via Mercedes
> wrote:
>
> So this guy has this car listed with 1 pic and very little details. I send
> him a message asking for additional photos and what the issues are.
He’s Looking for a Mercedes enthusiast familiar with the older diesels.
--FT
Sent from iPhone
> On Jul 18, 2019, at 6:24 PM, Kaleb C. Striplin via Mercedes
> wrote:
>
> So this guy has this car listed with 1 pic and very little details. I send
> him a message asking for additional photos
Yea, but for what? Not to buy his car. Only a moron would buy a car
with no real info or photos.
On 7/18/2019 5:39 PM, Buggered Benzmail via Mercedes wrote:
He’s Looking for a Mercedes enthusiast familiar with the older diesels.
--FT
Sent from iPhone
On Jul 18, 2019, at 6:24 PM, Kaleb C.
The thing about reed valves is that they inherently one-way...
-Curt
On Thursday, July 18, 2019, 5:08:49 PM EDT, Randy Bennell via Mercedes
wrote:
On 18/07/2019 3:32 PM, Dan Penoff via Mercedes wrote:
> They have a “valve plate” that has some circular discs that act as valves.
> I’m
You'll want a thermometer or two. You don't want the evaporator running below
freezing. The O-rings where the manifold bolts to the compressor are an issue
because of the vibration of Diesels. There is a version that is a metal washer
with O-ring on the inner diameter that is more robust. I
9L, no sweat. If you really have too much gasoline in the tank it will stop
running. I know.
> -Original Message-
> From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Karl
> Wittnebel via Mercedes
> Sent: Thursday, July 18, 2019 3:30 PM
> To: mercedes@okiebenz com
>
We had a discussion earlier about pain. I said something to the effect
that pain is mental.
The US Marine Corps has a billboard out that says: "the Battle is Won
Within" That means pretty much the same when the battle is with
pain. The Marines are right!
To the Marines who see this:
I needed to direct some dumb-dumbs on the W123 FB group to the proper way of
setting up and adjusting the vacuum system for the IP and transmission, so I
hit the WayBack Machine and cruised to mbz.org in 2002/2004.
Dang, there is so much good stuff there that people will probably never see. It
"any landing you can walk away from is a good landing" applies to land
vehicles too.
Rick Knoble via Mercedes wrote on 7/18/19 6:46 AM:
Glad you are okay. It's never a good thing to total out a car, but it's always
a good thing to be able to walk away from the wreck.
Rick
kinda kike the Cheep grand cherokee dissel for $60k. $60k for a
cheep to save maybe $500 a year? NopE! (How much Mercedes Benz
could I buy for $60k in 2007???)
Curt Raymond via Mercedes wrote on 7/18/19 10:18 AM:
GM has bungled the Cruze diesel almost as badly as they did diesel
Map of the dominant language in each state of the union, excluding English and
Spanish.
Most of it surprised me. French in Maine, Vermont, New Hampshire and Louisiana
didn't.
https://www.ar15.com/media/mediaFiles/64912/3F0F6F14-AF86-47EF-BAFA-8D22E795367A-1020650.png
Fgly...but you may need that when running (runaway) down pikes
peak or similar roads descending several thou ft in a short time.
Andrew Strasfogel via Mercedes wrote on 7/18/19 10:39 AM:
Functional or tasteless?
or 10 Gm 304 shovey engines.
Craig via Mercedes wrote on 7/18/19 12:44 PM:
On Thu, 18 Jul 2019 09:05:22 -0700 G Mann via Mercedes
wrote:
Detroit engine name system is:
20 = Number of cylinders
V = V configuration
149 = Cubic inches of displacement PER cylinder...
One big honking engine
Assuming it has at least 2 gal of dissel fuel in the tank, drive it to
the station and fill it up with the correct fuel. (factory manual)
Mitch Haley via Mercedes wrote on 7/18/19 1:24 PM:
On July 18, 2019 at 12:46 PM Kaleb Striplin via Mercedes
wrote:
The problem with him is not the bad
On Thu, 18 Jul 2019 19:59:38 -0400 Dan Penoff via Mercedes
wrote:
> I needed to direct some dumb-dumbs on the W123 FB group to the proper
> way of setting up and adjusting the vacuum system for the IP and
> transmission, so I hit the WayBack Machine and cruised to mbz.org in
> 2002/2004.
>
>
On Thu, 18 Jul 2019 18:41:25 -0600 Craig via Mercedes
wrote:
> On Thu, 18 Jul 2019 19:59:38 -0400 Dan Penoff via Mercedes
> wrote:
>
> > I needed to direct some dumb-dumbs on the W123 FB group to the proper
> > way of setting up and adjusting the vacuum system for the IP and
> > transmission,
Or the VW Tourag. When they were doing the V10 rocketship I kind of got it.
The 3.0l doesn't excite me.
Oh wait, I just looked it up, stock early 3.0l is 220hp/406#ft. Later is
240/406. Stage 1 tune takes that to 280/427 and 305/490 respectively.Sounds
like that'd be real fun in an older
1 - 100 of 114 matches
Mail list logo