[MBZ] ac compressor broke and pop belt 2004 Mercedes-Benz clk-class CLK 320 Coupe 2D, $900

Tittle or tilte? No tilte https://www.facebook.com/marketplace/item/3839719776164747 -- --FT ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] ac compressor pulley bearings?

And you can spend hours screwing around with it and the fix either does not work or doesn’t work for long, or just swap out the compressor. You are going to have to unbolt it and tilt it up or down to get enough access to get your c clip pliers in there. Sent from my iPhone > On Nov 26,

Re: [MBZ] ac compressor pulley bearings?

I think the compressor itself is ok (the AC leaks but it worked for awhile when I filled it once maybe it’s the compressor I don’t know) it’s just the pulley sounds rough --FT Sent from iFōn > On Nov 26, 2022, at 7:27 PM, Kaleb Striplin via Mercedes > wrote: > > You remove the bolt and the

Re: [MBZ] ac compressor pulley bearings?

You remove the bolt and the front plate comes off, next you have to remove a c clip way down inside the pulley. Very difficult if not impossible to remove with it on the car. If you have a used compressor you can try swapping it. I have tried to do this a couple of times and it didn’t last

[MBZ] ac compressor pulley bearings?

I'm putting a new water pump on the SL600, which seems to involve removing about everything from the front of the engine. That's fine as I have cleaned 28yr of grime off the front of the engine and various attachments.  Looks fairly good now and ready to go back together after I get a few

Re: [MBZ] AC compressor engage signal on a euro 123 wagon

> It is the older style unit with the vertical buttons in the middle. That's the [Evil] Chrysler system, is it not? http://formicapeak.com/~jimc/chryaccfh/chryaccfh.html -- Jim ___ http://www.okiebenz.com To search list archives

Re: [MBZ] AC compressor engage signal on a euro 123 wagon

OK thanks Curley. Will let you know how it goes. On Sat, Oct 19, 2019 at 9:04 PM Curley McLain via Mercedes < mercedes@okiebenz.com> wrote: > Mit Klima, or Sans Klima?If it has Klima, that is where you start. > Klima relay fails often. > > Otherwise, I'd start at the plug closest to the

Re: [MBZ] AC compressor engage signal on a euro 123 wagon

Mit Klima, or Sans Klima?    If it has Klima, that is where you start.   Klima relay fails often. Otherwise, I'd start at the plug closest to the clutch.   Likely if you have voltage there when the clutch should be engaged, the clutch coil is bad.   If no volts there, every case I have

Re: [MBZ] AC compressor oil

Craig, I'm thinking that the mineral oil didn't travel too far, as the r134 won't carry it. Lines from compressor to condenser and to the drier will be flushed too, they are easy. I may add some ester oil to "bridge" the two oils, so they play well together. -- Max Dillon Charleston SC

Re: [MBZ] AC compressor oil

On Sun, 11 Aug 2019 17:48:52 -0400 Meade Dillon via Mercedes wrote: > Well here is a FAQ from the Enviro-Safe website: > > https://www.es-refrigerants.com/resources/faq/w/id/16/details.asp > "Is Enviro-Safe™ Refrigerant compatible with all refrigerant oils? > > Yes, Enviro-Safe™ is totally

Re: [MBZ] AC compressor oil

Well here is a FAQ from the Enviro-Safe website: https://www.es-refrigerants.com/resources/faq/w/id/16/details.asp "Is Enviro-Safe™ Refrigerant compatible with all refrigerant oils? Yes, Enviro-Safe™ is totally compatible with all refrigerant oil available today. It can be used with Mineral,

Re: [MBZ] AC compressor oil

I thought PAG worked with everything? -D > On Aug 11, 2019, at 3:53 PM, Peter Frederick via Mercedes > wrote: > > PAG is more likely to work with propane/butane than mineral oil is likely to > work with R134a I think. > ___ > http://www.okiebenz.com > >

Re: [MBZ] AC compressor oil

Someone on the peach parts forum also recommended adding some Ester oil to "bridge" the two. I'd prefer to run the propane / butane Envirosafe stuff, so maybe the mineral oil will be ok in that regard. -- Max Dillon Charleston SC On August 11, 2019 3:52:03 PM EDT, Peter Frederick via Mercedes

Re: [MBZ] AC compressor oil

PAG is more likely to work with propane/butane than mineral oil is likely to work with R134a I think. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] AC compressor oil

You probably won't find any information for anything but R134a in automotive use, it's the standard since 1992 or 1993, and no automotive system uses R12 or anything else from the factory. Not system newer than then will have any recommendation for mineral oil Ester oils were the magic ones

Re: [MBZ] AC compressor oil

I need to get smart on the oils. For about ten years, The White Whale was fine with PAG-46 and r134a or with EnviroSafe 12 (propane / butane). I have sent an email to the Envirosafe folks to see which oil they recommend. - Max Charleston SC On Sun, Aug 11, 2019 at 2:26 PM Mitch

Re: [MBZ] AC compressor oil

Peter - I was under the impression that PAG is "universal" and can be used with either r12 or r134. The FSM calls for oil from sheet 362, which only has one oil listed (MB-brand) which I suspect is Denso ND-Oil 8, which is equivalent to PAG-46. I've purchased several bottles of mineral oil over

Re: [MBZ] AC compressor oil

If you are using propane "test" refrigerant, you need the mineral oil, anything with R134 needs the PAG or ester base oil -- PAG is too polar for propane, and mineral oil isn't polar enough for R134a In either case you are risking a compressor failure due to lack of lubrication, I'd make sure

Re: [MBZ] AC compressor oil

I believe oil which isn't refrigerant miscible leaves the compressor and doesn't come back. The refrigerant is supposed to carry it back to the compressor. It probably ends up internally insulating the condenser. Your 134A will circulate the PAG, but I think the mineral stuff is just getting

Re: [MBZ] AC compressor oil

Does the PAG-46 oil circulate with the refrigerant, and the mineral oil mostly remain in the compressor? I'm wondering if I should just remove and drain the compressor, maybe flush out the condenser, install new drier and correct PAG-46 oil, re-charge and go. - Max Charleston SC On

[MBZ] AC compressor oil

I think I've done something wrong. Yesterday I finished re-sealing the AC compressor for The White Whale (1987 300TD). My interpretation of the FSM is that 50cc of oil were required, due to the sudden loss when the shaft seal failed, and replacing the drier, and draining all old oil from the

Re: [MBZ] AC COMPRESSOR

Do you have a local fix it place that can do rebuild? The guys I had rebuild my alternator for the w115 also do compressors. Not sure why, but they do. clay 1974 450sl - Frosch - Two tone green 1986 SDL - Polei 1982 300 SD - Allen retired models- 2002 s430 - Victor, a Stately & well

Re: [MBZ] AC COMPRESSOR

That looks like the R4 unit I have in the SL clay 1974 450sl - Frosch - Two tone green 1986 SDL - Polei 1982 300 SD - Allen retired models- 2002 s430 - Victor, a Stately & well tailored crap 1976 300D - Blei Vanst - it looks silvery 1972 220D - Gump - She was green, simple and ran 1995 E300D

Re: [MBZ] AC COMPRESSOR

Looks like the one in my 72 280SE, it was really an aftermarket setup. Don't have the car anymore, so can't say for sure, but it was definitely a GM compressor. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] AC COMPRESSOR

The GM A6 was used in a number of older MB's. The 450's of various types, I think. -- Jim ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] AC COMPRESSOR

Dunno. It seems to match GM a6 I found online. The 85 R107 has an R4 compressor. We know there are pitfalls if you have to replace an R4. I wonder if the ND will fit in the same bracket as the A6? both have 4 front mounting holes and 1 or 2 rear. Its just a ? of getting the right

Re: [MBZ] AC COMPRESSOR

That one looks like the compressor that was used on the 81-85 v8 cars which I’m remembering was the a6. Maybe it’s not the a6 Sent from my iPhone > On Mar 24, 2018, at 4:32 PM, Curley McLain via Mercedes > wrote: > > So I found that GM used the a6 in 63-76 corvettes.

Re: [MBZ] AC COMPRESSOR

So I found that GM used the a6 in 63-76 corvettes. It must be an antique. So, it is older than the R4 design. THis engine must be an early M116. Did they use this GM a6 compressor in 116 body cars? W108/109? I think the M116 was in both bodies as the 3.5. Still not a fan of

Re: [MBZ] AC COMPRESSOR

Keep it or scrap it? What would you do? No GM vehicles... Thinking it was an ND, I was going to reuse it and take out the R4. Now I guess I will leave it original, unless there is some good reason to keep the a6... (M116, 85 380SL) Kaleb C. Striplin via Mercedes

Re: [MBZ] AC COMPRESSOR

Was that used on MB cars in the USA? or is it an aftermarket changeover? Kaleb C. Striplin via Mercedes March 24, 2018 at 12:44 PM Looks like the GM a6 to me Sent from my iPhone ___ http://www.okiebenz.com To search list

Re: [MBZ] AC COMPRESSOR

Looks like the GM a6 to me Sent from my iPhone > On Mar 24, 2018, at 12:31 PM, Curley McLain via Mercedes > wrote: > > without digging the compressor out, I assumed it was a ND since it was not a > GM. I thought only ND and GM compressors came on mid 80s MBs. > >

Re: [MBZ] AC Compressor Reseal

I wouldn't know on that as the first windows machine I had was a 256 non IBM. It had a massive 5MB hard drive and 5.5 floppy. Wow, I was in heaven! Even had a modem though I think it was only 2,500 baud. Still another thing the Apple never had and a lot more then the 16KB of memory that came

Re: [MBZ] AC Compressor Reseal

I think the last machine to come out with a cassette interface was the IBM PC. The modulation and data formats had a lot to do with reliability. No two machines (brand) used the same system. Some worked better than others. -- Jim ___ http://www.okiebenz.com

Re: [MBZ] AC Compressor Reseal

Not dependable? Really? When I first got my Apple II the cassette tape was all I had for a couple of years before I saved enough money to get the 5.5 floppy drive. I never had the first problem with it. Just lucky I guess or a good cassette player. Manfred Date: Wed, 21 Dec 2016 01:31:31

Re: [MBZ] AC Compressor Reseal

Uhh, always? Never had a failure, still works 35 years later... Curt Sent from Yahoo Mail on Android On Tue, Dec 20, 2016 at 11:31 PM, fmiser via Mercedes wrote: > Curt wrote: > ... my first computer, the TI99/4A. ...I casually mentioned that > my first computer

Re: [MBZ] AC Compressor Reseal

Curt wrote: ... my first computer, the TI99/4A. ...I casually mentioned that my first computer had 16KB of RAM and we saved programs to audio tape. ... The younger folks didn't believe you could save programs to audio tape so we had a learning moment... Sure! You could _save_ the program to

Re: [MBZ] AC Compressor Reseal

Same way to start the cummins 504 or trippple nnnickel. 2 people or spray the ether and run around quick, climb in ant try to get it to light with whatever ether is left. Method 2 takes much more ether. same procedure on direct injection engines in general. JD 1530 had a little fixture you

Re: [MBZ] AC Compressor Reseal

mber 19, 2016 5:05 PM Subject: Re: [MBZ] AC Compressor Reseal Do some MB how to Videos at the next clamQ. How bout some of grooming the schnee trails?  Starting up that groomer with the MB engine? > Mountain Man via Mercedes <mailto:mercedes@okiebenz.com> > December 19, 2016 at

Re: [MBZ] AC Compressor Reseal

for ideas if you've got them. -Curt From: Mountain Man <maontin@gmail.com> To: Curt Raymond <curtlud...@yahoo.com>; Mercedes Discussion List <mercedes@okiebenz.com> Sent: Monday, December 19, 2016 3:43 PM Subject: Re: [MBZ] AC Compressor Reseal Curt wrote: > Not ha

Re: [MBZ] AC Compressor Reseal

Do some MB how to Videos at the next clamQ. How bout some of grooming the schnee trails? Starting up that groomer with the MB engine? Mountain Man via Mercedes December 19, 2016 at 2:43 PM You did very well with your coffee-for-MrsCurt video - thank you. Do a

Re: [MBZ] AC Compressor Reseal

Curt wrote: > Not having an MB slows down the process of making MB videos. ;) You did very well with your coffee-for-MrsCurt video - thank you. Do a cold weather inside video? - not coleman? tin-man-mao ___ http://www.okiebenz.com To search list archives

Re: [MBZ] AC Compressor Reseal

On Mon, 19 Dec 2016 15:08:14 -0500 Dan--- via Mercedes wrote: > Part 1: > > https://m.youtube.com/watch?v=CD5lLC5v6PE > > Part 2 is linked on the same page. Thank you! Craig ___ http://www.okiebenz.com To search list archives

Re: [MBZ] AC Compressor Reseal

Part 1: https://m.youtube.com/watch?v=CD5lLC5v6PE Part 2 is linked on the same page. Dan Sent from my iPad > On Dec 19, 2016, at 2:54 PM, Craig via Mercedes wrote: > > On Mon, 19 Dec 2016 07:47:11 -0500 Dan--- via Mercedes > wrote: > >> Using

Re: [MBZ] AC Compressor Reseal

On Mon, 19 Dec 2016 07:47:11 -0500 Dan--- via Mercedes wrote: > Using the you tube videos on disassembly and reassembly it took me > about 45 minutes to do the reseal. Please post the URLs of the ones you watched. Thanks, Craig ___

Re: [MBZ] AC Compressor Reseal

, the other could use it I suspect. That might make a good video too... -Curt From: Curley McLain via Mercedes <mercedes@okiebenz.com> To: Mercedes Discussion List <mercedes@okiebenz.com> Cc: Curley McLain <126die...@gmail.com> Sent: Monday, December 19, 2016 8:44 AM Sub

Re: [MBZ] AC Compressor Reseal

Rick Knoble via Mercedes wrote: Rick Who thinks some of us need to start making videos to inform others... ___ ONE of us does, but unfortunately, most of them are not about fixin' MBs. His movies are very informative and interesting, just about other

Re: [MBZ] AC Compressor Reseal

WAYTAGO! I hope it lasts. My $25 solution was to find the same base compressor on a rice burner for $25, then swap over the MB specific parts (clutch and speed sensor) Dan--- via Mercedes December 19, 2016 at 6:47 AM Resealed my compressor on the W126

Re: [MBZ] AC Compressor Reseal

‎Dan sez: >‎This was especially important this >morning on the way to work as it was in >>the low 70s at 6:00 am with a dew point >well above the ambient temperature, Yeah, go ahead and gloat. -6f here right now... >‎Using the you tube videos on >disassembly and reassembly it took me >about 45

[MBZ] AC Compressor Reseal

Resealed my compressor on the W126 yesterday. For $21 and a couple hours of work it was an amazingly easy and economical fix to my leaking compressor shaft seal. The system held a vacuum for over two hours when done, and after charging it I'm back to making ice cubes like before. This was

Re: [MBZ] Ac compressor clutch coil

> > How do you test the actual coil itself? First with an ohmmeter. I think they draw an amp or three, so that would put them in the 4-12 ohm range. If that looks plausible you hook it to power, see if it clacks. -- Jim ___ http://www.okiebenz.com To

[MBZ] Ac compressor clutch coil

How do you test the actual coil itself? I thought before I replaced the entire compressor I would just see about swapping the hub. I found a 103 in the shop that the pulley spun free on but the compressor was locked up. I pulled the outer plate, and the first clip to remove the pulley part. The

Re: [MBZ] ac compressor failure 300td 1982

On August 12, 2015 at 11:56 PM Jim Cathey via Mercedes mercedes@okiebenz.com wrote: my perfect running 3 month old R4 compressor failed today. Are you sure it was mounted/clocked right-side up? The oil suck port (inside) needs to be DOWN. Isn't/wasn't there an X cast in to the

Re: [MBZ] ac compressor failure 300td 1982

my perfect running 3 month old R4 compressor failed today. Are you sure it was mounted/clocked right-side up? The oil suck port (inside) needs to be DOWN. Isn't/wasn't there an X cast in to the body? -- Jim ___ http://www.okiebenz.com To search list

[MBZ] ac compressor failure 300td 1982

Folks my perfect running 3 month old R4 compressor failed today. AC had been running for maybe 2 minutes and i was going probably 10 mph. Outside air temp about 90f. As i started off i heard and explosion POW and i assumed i had had a blowout, then i saw a puff of oil smoke come out from

Re: [MBZ] ac compressor failure 300td 1982

Folks my perfect running 3 month old R4 compressor failed today. AC had been running for maybe 2 minutes and i was going probably 10 mph. Outside air temp about 90f. As i started off i heard and explosion POW and i assumed i had had a blowout, then i saw a puff of oil smoke come out from

[MBZ] AC Compressor not coming On

Howdy - 1991 300D 2.5T. We keep the ACC on /Auto /assuggested and the AC worked fine until this afternoon when she was coming home from work. The AC worked great yesterday on her way home and this morning it was in the 40s and 50s so it wasn't really needed - then today it failed to cool.

Re: [MBZ] AC Compressor not coming On

Low pressure switch is usually on top of the receiver-drier. Short the wires together and see if things run at that point. If so, you've lost your charge. Dan On Sep 25, 2013, at 5:43 PM, Larry T wrote: Howdy - 1991 300D 2.5T. We keep the ACC on /Auto /assuggested and the AC worked

Re: [MBZ] AC Compressor not coming On

My compressor wouldn't come on few days ago 'til I put some R-12 in it. Wilton - Original Message - From: Larry T l02tur...@comcast.net To: Mercedes Discussion List mercedes@okiebenz.com Sent: Wednesday, September 25, 2013 5:43 PM Subject: [MBZ] AC Compressor not coming On Howdy

Re: [MBZ] AC Compressor not coming On

wouldn't come on few days ago 'til I put some R-12 in it. Wilton - Original Message - From: Larry T l02tur...@comcast.net To: Mercedes Discussion List mercedes@okiebenz.com Sent: Wednesday, September 25, 2013 5:43 PM Subject: [MBZ] AC Compressor not coming On Howdy - 1991 300D 2.5T

Re: [MBZ] AC Compressor not coming On

I noticed 2 spade connectors next to the sight glass - one red and one black (I think - terrible memory) but tomorrow i'll look closer. thx Larry On 9/25/2013 6:27 PM, Dan Penoff wrote: Low pressure switch is usually on top of the receiver-drier. Short the wires together and see if things

Re: [MBZ] AC Compressor

Hi Don, I'm interested! I'll contact you off list. Jaime On Fri, Apr 26, 2013 at 8:01 PM, OK Don okd...@gmail.com wrote: I have a partial tank of virgin R12 that I'm not likely to use since I sold all the old cars. I'll weigh it and estimate how much is left and make a price if anyone is

[MBZ] AC Compressor

Just informed that my compressor is trashed. I guess it's time to shop for a new one along with a dryer, and expansion valve.. Oh well, at least it'll be cool in my car this summer. Jon '85 300D ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] AC Compressor

Is it 134? -- if not you should convert over --R On 4/26/13 10:57 AM, Jon Agne wrote: Just informed that my compressor is trashed. I guess it's time to shop for a new one along with a dryer, and expansion valve.. Oh well, at least it'll be cool in my car this summer. Jon '85 300D

Re: [MBZ] AC Compressor

On Apr 26, 2013 8:21 AM, Rich Thomas richthomas79td...@constructivity.net wrote: Is it 134? -- if not you should convert over Only if he wants A/C that leaks and doesn't cool as well. Alex ___ http://www.okiebenz.com For new and used parts go to

Re: [MBZ] AC Compressor

I think someone did a half-a** job of conversion before me. The R-12 high pressure port is still installed. I am thinking of going back to the R-12 ports and using Freeze 12 and regular oil in the system. Jon On Apr 26, 2013, at 11:59 AM, Alex Chamberlain wrote: On Apr 26, 2013 8:21 AM,

Re: [MBZ] AC Compressor

Jon, I don't recall what part of the country you're in, but if there is anything in the way of heat I would definitely stay with or revert back to some form of R-12. I can tell you that converted R-12 systems in this part of the world (Florida) just don't cut it. The worst conversion I ever

[MBZ] AC Compressor

Folks I'd suggest he replace the compressor with a NEW UNIT and not rebuilt They can be found for something like $225 or so be sure to flush the condenser and evaporator and replace the expansion valve i filled my 1982 300td with R12 after replacing all that stuff about 3 years ago and

Re: [MBZ] AC Compressor

I've resisted converting here in hot, humid Eastern NC, too; still using R-12 in bowfa mine. Wilton - Original Message - From: Dan Penoff d...@penoff.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Friday, April 26, 2013 1:52 PM Subject: Re: [MBZ] AC Compressor Jon

[MBZ] AC Compressor - CLUTCH

Hmmm, I was just looking at the service order from yesterday, and it says the clutch is bad. Is this a replaceable item, or is it necessary for a new compressor? Jon ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list

Re: [MBZ] AC Compressor - CLUTCH

The clutch can be replaced inflame, however, most shops don't want to do it. My son's 300E 2,6 has a bad clutch coil and I can't find one other than to buy a whole clutch. I really don't want to have to replace the compressor and have to deal with everything that goes with it Dan On Apr

Re: [MBZ] AC Compressor - CLUTCH

On Apr 26, 2013, at 3:26 PM, Jon Agne wrote: Hmmm, I was just looking at the service order from yesterday, and it says the clutch is bad. Is this a replaceable item, or is it necessary for a new compressor? It's a replaceable item. I don't know if a new compressor comes with a new clutch;

Re: [MBZ] AC Compressor - CLUTCH

Dan, Somewhere in the archives, there is a posting ofhow I replaced my SDL compressor with a rice buggy compressor, and which model/yr the donor car was. I know I used the OE clutch and changed it, but it is my recollection that the coil was the same in both. I think a trip to a PP would

Re: [MBZ] AC Compressor - CLUTCH

We have a local chain known as Ice Cold Auto Air that unfortunately no longer has a location on my side of town. If they did I would just take it there and let them have at it. They are good and cheap, and they'll even let you supply parts if you ask in advance. If I had the disposable $$

Re: [MBZ] AC Compressor - CLUTCH

Subject: Re: [MBZ] AC Compressor - CLUTCH We have a local chain known as Ice Cold Auto Air that unfortunately no longer has a location on my side of town. If they did I would just take it there and let them have at it. They are good and cheap, and they'll even let you supply parts if you ask

Re: [MBZ] AC Compressor - CLUTCH

On Apr 26, 2013 12:47 PM, Craig diese...@pisquared.net wrote: On Apr 26, 2013, at 3:26 PM, Jon Agne wrote: Hmmm, I was just looking at the service order from yesterday, and it says the clutch is bad. Is this a replaceable item, or is it necessary for a new compressor? It's a

Re: [MBZ] AC Compressor - CLUTCH

I just replaced the clutch on my 97 e300 with compress on the car, did not have to evacuate Sent from my iPhone On Apr 26, 2013, at 2:26 PM, Jon Agne jonag...@gwi.net wrote: Hmmm, I was just looking at the service order from yesterday, and it says the clutch is bad. Is this a replaceable

[MBZ] AC compressor

The brand new R4 compressor that i put in my 982 300td came with new clutch+pulley nothing to change my impression is that the clutches rarely fail unless perhaps the compressor locks up and fries it, but usually the belt will break pretty quickly if the compressor is locked down

Re: [MBZ] AC Compressor

I have a partial tank of virgin R12 that I'm not likely to use since I sold all the old cars. I'll weigh it and estimate how much is left and make a price if anyone is interested in it. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To

Re: [MBZ] AC Compressor

Get a new compressor. Rusty used to say that the rebuilt were not worth it. -- Max Dillon Charleston SC '95 E300, '87 300TD, '73 Balboa 20 Jon Agne jonag...@gwi.net wrote: Just informed that my compressor is trashed. I guess it's time to shop for a new one along with a dryer, and expansion

Re: [MBZ] AC Compressor - CLUTCH

Replaceable, and also replace the front and rear seals while you are there. -- Max Dillon Charleston SC '95 E300, '87 300TD, '73 Balboa 20 Jon Agne jonag...@gwi.net wrote: Hmmm, I was just looking at the service order from yesterday, and it says the clutch is bad. Is this a replaceable item,

Re: [MBZ] AC Compressor

Rebuilt only if you can put it on the counter of the place you bought it from when it stops working within the 1 year warranty. On Fri, Apr 26, 2013 at 7:48 PM, Max Dillon meadedil...@bellsouth.netwrote: Get a new compressor. Rusty used to say that the rebuilt were not worth it. -- Max

[MBZ] AC Compressor

Little ad in the paper 2001 Mercedes Benz E320 AC Compressor, $50. Anybody want this thing? What else would it fit? --R ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

[MBZ] AC compressor

I have to replace the AC compressor on my '82 300SD. I come across a bunch of different makes, AC Delco, Behr, Four Seasons, Delph, etc. and prices ranging frm $200 to $400 for new ones. Any one better than the other? -- Hans Neureiter, Katy, TX '82 300SD Even a stopped clockis right twice a day.

Re: [MBZ] AC compressor

www.buyEUROparts.biz www.buyASIANparts.biz Tel/ 1-800-741-5252 Fax/ 770-454-9745 ICQ 427542441 AIM BuyMBparts - Original Message - From: Hans Neureiter diese...@gmail.com To: Mercedes Discussion List Mercedes@okiebenz.com Sent: Monday, May 23, 2011 10:34 AM Subject: [MBZ] AC compressor I have

Re: [MBZ] AC compressor

AC Delco is the OEM I believe. Have you checked with Rusty? Allan Hans Neureiter diese...@gmail.com writes: I have to replace the AC compressor on my '82 300SD. I come across a bunch of different makes, AC Delco, Behr, Four Seasons, Delph, etc. and prices ranging frm $200 to $400 for new

[MBZ] AC Compressor staying engaged.

AC Compressor is staying engaged even though the temps are in low 20's F. It does disengage when in economy mode or off button is pushed on CCU. Is this caused by a faulty switch or relay. Any suggestions or trouble shooting write-ups would be appreciated. thanks, Mike 1984 300D

Re: [MBZ] AC Compressor staying engaged.

Could be a bad temp sensor (outside air most likely) or a bad PBCU. A stuck relay would run it all the time. Peter ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] AC Compressor staying engaged.

I would suspect the evaporator temperature switch (I don't remember the location in the w123 chassis, but it will be near the evaporator case) It should cut out at 25F... -- John W Reames jwrea...@comcast.net Home: +14106646986 Mobile: +14437915905 On Jan 2, 2010, at 10:04 AM, Michael Esh

[MBZ] AC Compressor Turning Slowly

@okiebenz.com Content-Transfer-Encoding: 7bit In-Reply-To: [EMAIL PROTECTED] Message-Id: [EMAIL PROTECTED] X-Mailer: Apple Mail (2.553) X-Server: High Performance Mail Server - http://surgemail.com r=-412260344 X-Antivirus-Scanner: Clean mail though you should still use an Antivirus Subject: Re: [MBZ] AC

Re: [MBZ] AC Compressor Turning Slowly

Normal... - Original Message - From: Jim Cathey [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Saturday, April 28, 2007 11:34 PM Subject: Re: [MBZ] AC Compressor Turning Slowly the AC compressor pulley turning about an eighth of turn at a time

Re: [MBZ] AC Compressor Turning Slowly

://members.rennlist.com/roadtest/ . - Original Message - From: Bob Rentfro [EMAIL PROTECTED] To: Mercedes Discussion List Mercedes@okiebenz.com Sent: Sunday, April 29, 2007 2:02 AM Subject: [MBZ] AC Compressor Turning Slowly I ran the AC on the way home today since it was 100 degrees

[MBZ] AC Compressor woes...

Gents, I seem to recall a discussion at one time about AC compressors on 123's being mounted upside down...and if not mounted right side up, failing due to improper oil distribution in the compressor... Anybody remember or know the answer? My compressor has once again seized up, and last time I

Re: [MBZ] AC Compressor woes...

I seem to recall a discussion at one time about AC compressors on 123's being mounted upside down...and if not mounted right side up, failing due to improper oil distribution in the compressor... Anybody remember or know the answer? The upside-downers have a big X on them, or so I recall.

Re: [MBZ] AC Compressor woes...

Royce Engler wrote: Gents, I seem to recall a discussion at one time about AC compressors on 123's being mounted upside down...and if not mounted right side up, failing due to improper oil distribution in the compressor... Anybody remember or know the answer? My compressor has once again

Re: [MBZ] AC Compressor woes...

PROTECTED]; Mercedes Discussion List Subject: Re: [MBZ] AC Compressor woes... Royce Engler wrote: Gents, I seem to recall a discussion at one time about AC compressors on 123's being mounted upside down...and if not mounted right side up, failing due to improper oil distribution in the compressor

Re: [MBZ] AC compressor noisy at idle

: Saturday, July 29, 2006 6:53 PM To: mercedes@okiebenz.com Subject: Re: [MBZ] AC compressor noisy at idle In a message dated 7/29/2006 8:37:46 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: I'm starting to have what I think is excessive noise from the A/C compressor on my '81 300SD. I

[MBZ] AC compressor

I'm starting to have what I think is excessive noise from the A/C compressor on my '81 300SD. I am pretty sure the compressor was a reman installed about 18 months ago. Any recommendations for repair or replacement? Would I be better off with a junkyard, reman, or should I go for a new? Car is

Re: [MBZ] AC compressor

I'm starting to have what I think is excessive noise from the A/C compressor on my '81 300SD. I am pretty sure the compressor was a reman installed about 18 months ago. Any recommendations for repair or replacement? Would I be better off with a junkyard, reman, or should I go for a new? Car

Re: [MBZ] AC compressor

List Subject: Re: [MBZ] AC compressor I'm starting to have what I think is excessive noise from the A/C compressor on my '81 300SD. I am pretty sure the compressor was a reman installed about 18 months ago. Any recommendations for repair or replacement? Would I be better off

Re: [MBZ] AC compressor noisy at idle

In a message dated 7/29/2006 8:37:46 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: I'm starting to have what I think is excessive noise from the A/C compressor on my '81 300SD. I am pretty sure the compressor was a reman installed about 18 months ago. Any recommendations for

  1   2   >