dsereta...@yahoo.com wrote:
It seems they there are cases where the identical part made in the same
factory is made to different standards.
I'm not saying it happens, but if you had a market where you could sell the ones
that almost meet MBZ standards instead of scrapping them, those sales
Napolitano
Apostle of Obama
Gives us daily dread
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Well.. drat!
Thanks for the follow up Rusty. You have a national resource that's kept
our old Mercedes going.
The sense of security that great service and good parts [and advice] has
been available has added unmeasurable value to the ownership experience.
For which, we all thank you.
Oooh yeah, might help if I let you lot know that the job is done.
Even put a new timing chain in.
ATTABLOKE!
Hendrik
who forgets stuff
So that makes you normal.
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list
Me thinks your thought is correct. A terrible pity.
Wilton
- Original Message -
From: Hendrik and Fay heni...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 12:16 AM
Subject: Re: [MBZ] Trent badaboy
Hmmnh me thinks that Trent is not
Aussie Air Force flew some B-47's for a few years for weather recon, etc.
Probably in '60's or early '70's.
Wilton
- Original Message -
From: Hendrik and Fay heni...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, June 12, 2013 11:47 PM
Subject: Re:
On Jun 12, 2013 10:17 PM, Jim Cathey j...@windwireless.net wrote:
Hasn't Jill Cathey been through a winter now with her
BMW X5?
Has. She sez: I like it.
OK, so, as head of the maintenance dept., do *you* like it? Any problems
worth mentioning, unexpected repairs, difficulty getting parts,
Bloke? 'Thought blokes are on that little island just off the NE coast of
Europe and mates on that BIG island down below the equator SE of Asia.
Somebody set me straight; what's the difference between a bloke and a
mate?;)
Wilton
- Original Message -
From: Dieselhead
'Left another msg with answering service for Trent this morning: Consider
31 May order canceled; initiate full refund. Please call. Answering
service is not involved in the business and the ladies there have no
knowledge of the business other than the many calls from
frustrated/disgruntled
Even I smiled at that one.
On Thu, Jun 13, 2013 at 9:10 AM, Rich Thomas
richthomas79td...@constructivity.net wrote:
Napolitano
Apostle of Obama
Gives us daily dread
__**_
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To
OK, so, as head of the maintenance dept., do *you* like it ['06 X5]?
Any problems worth mentioning, unexpected repairs, difficulty getting
parts, etc.?
An Office I am not entitled to, under the terms of our revised
transportation treaty, but it's been pretty good so far. One
torn air intake
There are any number of parts sites on the web that are just WorldPac
front-ends. If there is not going to be any additional service on top
of that, I don't see a lot of value in the idea.
Kaleb C. Striplin ka...@striplin.net writes:
Well I am thinking about seeing if it would be feasible to
OK, so, as head of the maintenance dept., do *you* like it ['06 X5]?
Any problems worth mentioning, unexpected repairs, difficulty getting
parts, etc.?
The [seat heaters] in the 560SEL she
spurned kick the crap out of 'em.
The SEL was merely 2x what she spent on the seat heaters alone.
Ugh.
Jim Cathey wrote:
The tire monitoring system has gone off twice now. Legitimately.
This uses the ABS sensors to detect radius changes due to low
air. What can I say, it works.
...and doesn't add hundreds of dollars to the cost of a spare set of wheels.
I like that idea.
Mitch.
On Jun 13, 2013, at 10:21 AM, WILTON wilt...@nc.rr.com wrote:
I hope that whatever problems that have disrupted our relationship can be
resolved, and I wish you well.
That was tactful.
Attaboy.
Rick
Sent from my iPhone
___
http://www.okiebenz.com
For
Hurst has a Bando belt listed. Anybody know 'bout Bando? He also has a
no-name belt for $5 more; anybody know 'bout no-name?
Wilton
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
SWMBO says I'm not very tactful, but I do try sometimes. ;)
Thnks
Wilton
- Original Message -
From: Rick Knoble rickkno...@hotmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 12:20 PM
Subject: Re: [MBZ] 31 May order
On Jun 13, 2013, at
On Jun 13, 2013, at 10:33 AM, Allan Streib str...@cs.indiana.edu wrote:
There are any number of parts sites on the web that are just WorldPac
front-ends. If there is not going to be any additional service on top
of that, I don't see a lot of value in the idea.
If all you had as a business
So if jabba becomes the new parts guy here will he be unbanned?
Sent from my iPhone
On Jun 13, 2013, at 12:21 PM, WILTON wilt...@nc.rr.com wrote:
Hurst has a Bando belt listed. Anybody know 'bout Bando? He also has a
no-name belt for $5 more; anybody know 'bout no-name?
Wilton
'Don't know 'bout all that; right now, I'm just needing some parts. ;)
Wilton
- Original Message -
From: dsereta...@yahoo.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 12:27 PM
Subject: Re: [MBZ] 350SDL parts
So if jabba becomes the new
Yeah, but, sometimes, ya need to talk to somebody who knows the territory,
a la Professor Harold Hill. ;)
Wilton
- Original Message -
From: Rick Knoble rickkno...@hotmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 12:26 PM
Subject: Re: [MBZ]
Curt.
By the EPC the part no. for the hose is:- N 900271042012 40mm dia. one meter
in length. Cut to fit.
The hose that he sent you is not applicable for your OM616.
Fred Moir
Lynn MA
Diesel preferred.
From: Curt Raymond curtlud...@yahoo.com
To: Diesel List
On Jun 13, 2013, at 11:32 AM, WILTON wilt...@nc.rr.com wrote:
Don't know 'bout all that; right now, I'm just needing some parts. ;)
Eastern (PA) OEM dealer parts. Best prices I can find for OEM.
http://benzpartsforless.com/
Aftermarket is a bit of shopping for the best price. Autohaus AZ
I consulted Hursty for my 190D radiator hose and while he wasn't able to get
anything other than URO I appreciate his effort and will be sending him my
business from now on.
-Curt
Date: Thu, 13 Jun 2013 11:32:51 -0400
From: Allan Streib str...@cs.indiana.edu
To: Kaleb C. Striplin
Uh-oh; that's my first question for 'im: Can he get OEM hose, 'stead of the
URO hose he has listed?
Wilton
- Original Message -
From: Curt Raymond curtlud...@yahoo.com
To: Diesel List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 12:57 PM
Subject: Re: [MBZ] 31 May order
I
Not no-name, Contitech if going by the picture. Wouldn't touch that
Bando on looks alone, just looks cheap! http://www.bandousa.com
I'd go with the Contitech, if not ordering a MB belt for $10-$15 more.
Thanks to Rich K. for the link, at benzpartsforless:
OE Mercedes: $34.05 not bad!
WILTON wrote:
Hurst has a Bando belt listed. Anybody know 'bout Bando? He also has a no-name belt
for $5 more; anybody know 'bout no-name?
There was a recent discussion about Bando when somebody was looking for belts
for their Japanese branded vehicle. Seems like it turned out to be an OEM
To be fair, whether it's Jabba or anyone else, if MB only sells in bulk you're
going to have a tough time finding it as an OE part.
I can check my dealer guy if you want. If they have it in bulk he'll cut a
piece off and sell it to me.
Dan
Sent from my iPad
On Jun 13, 2013, at 1:01 PM,
So if jabba becomes the new parts guy here will he be unbanned?
If it is unbanned, I don't wanna hear his lip. That means I will
bail out. That is even worse than losing Q.
This is a great group of people without him. Yes, even andrew!
___
Well, maybe, I'll look elsewhere; 'didn't mean to upset anybody.
Wilton
- Original Message -
From: Dieselhead 126die...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 1:04 PM
Subject: Re: [MBZ] 350SDL parts
So if jabba becomes the new
It's not my call and I am not going to get involved one way or another, but I
will say that I have re-established ties with Gary and he has mellowed
significantly, in my opinion. I think my observations have some credence due to
the fact that I was often on the receiving end of his ire.
On a
Have you tried the Classic Center yet? They have GREAT service and offer
15% discount on OEM parts to MBCA members. They undercut my local
dealership by 15 percent.
On Thu, Jun 13, 2013 at 1:11 PM, Dan Penoff d...@penoff.com wrote:
To be fair, whether it's Jabba or anyone else, if MB only
$58.47 OE @ benzpartsforless 201 501 43 82 (lower hose).
I'm really liking this site! Helps though if you look up the part #'s in
the EPC or elsewhere first. Excellent OE pricing! Have you actually
ordered from them before Rick K.?
On 6/13/2013 1:01 PM, WILTON wrote:
Uh-oh; that's my first
FWIW I asked Randy to check his sources. This is a good example of the sort of
thing he knows very well.
I'll report back when I hear from him.
Dan
Sent from my iPad
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list
Mitch,
That was me, I needed an alternator for my Toyota beater and the belt is heavy
and thick and seems to be a good quality. I would order another one if I
needed it.
Todd Smith
-Original Message-
From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Mitch Haley
Sent:
Posted this yesterday, if anyone missed it (240D Thermostat to Water
Pump Hose). Looks like someone is already offering pre cut hose, I was
surprised to find it on a G-Wagon/Unimog site even, but there it is
On 6/12/2013 3:28 PM, Chris James wrote: '75-'83 240D Thermostat to
Water Pump
Just talked to Randy. He can help with the hose, in fact, he says he has a
unique way of cutting the bulk hose, whatever that means.
That is a “cut to fit” hose. Have him contact me. I even developed a nice way
of cutting it straight!
Randy Steele
European Parts Specialists
805-683-4020
You sure we're taking 'bout same hose? Lower rad hose for 91 350SDL? $109
w/tax at MB stealer/Raleigh; $75 or so at Q's and Hursty's. ('Course, I've
already paid for for it and don't have it from Q2, and I don't want Hursty's
URO.)
Oh, maybe, you're talking 'bout Curt's hose. ;)
Wilton
I'm sorry. I was talking about Curt's 240D hose.
My bad.
Dan
On Jun 13, 2013, at 1:51 PM, WILTON wilt...@nc.rr.com wrote:
You sure we're taking 'bout same hose? Lower rad hose for 91 350SDL? $109
w/tax at MB stealer/Raleigh; $75 or so at Q's and Hursty's. ('Course, I've
already paid
Email and tell him you want a quality belt, he'll hook you up.
I recently (well 5 months ago) got a new belt for my 190D, my local CarQuest
had one (in stock no less), I forget the brand (Continental?) but folks on here
said it was a good choice.
-Curt
Date: Thu, 13 Jun 2013 12:21:21 -0400
I suppose if he can act right.
Sent from my iPhone
On Jun 13, 2013, at 11:27 AM, dsereta...@yahoo.com wrote:
So if jabba becomes the new parts guy here will he be unbanned?
Sent from my iPhone
On Jun 13, 2013, at 12:21 PM, WILTON wilt...@nc.rr.com wrote:
Hurst has a Bando belt listed.
I found mine on Amazon (or rather Rick did) maybe if you make the appeal on
here (with the car details which I, regrettably, have forgotten) somebody can
find one for you too.
Otherwise it might be dealer time.
-Curt
Date: Thu, 13 Jun 2013 13:01:08 -0400
From: WILTON wilt...@nc.rr.com
To:
Today's short test before the rain seems to show my chunk of 44mm hose works
okay, I got some beefy hose clamps and chucked 'em on good.
Last piece of it I got from my Indy who probably buys in bulk. I'll call him
and see if he's got some. While the hose seems okay thus far I haven't really
put
I tried to find belts on that web site, they must be buried somewhere,
not found under Engine. I put in a belt number and got a hit, but
nothing about type/manf, size etc., though the banner does say Genuine
Original Equipment Replacement Parts so maybe they are OEM or actual
Benz parts. How
Doesn't say who makes it though. Thats about 2x too expensive for URO but not
the highest I've seen. About what I paid for Lemfeorder.
-Curt
Date: Thu, 13 Jun 2013 13:26:32 -0400
From: Chris James c_ja...@gmx.com
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] 31 May order
And Chris is talking about my 190D hose.
Wilton if it were me I'd go to the dealer. I shouldve done that on my 190D,
probably could get the part quicker too, I'm looking at Tuesday.
-Curt
Date: Thu, 13 Jun 2013 13:58:36 -0400
From: Dan Penoff d...@penoff.com
To: Mercedes Discussion List
Sorry, yes in that post I was referring to Curt's (190D) hose.
The hose for your 350SDL (lower rad, 1265000875) lists for $80 @
benzpartsforless.
On 6/13/2013 1:49 PM, WILTON wrote:
You sure we're taking 'bout same hose? Lower rad hose for 91
350SDL? $109 w/tax at MB stealer/Raleigh; $75 or
Thanks! That's great to know, if anyone is needing this particular hose.
On 6/13/2013 1:45 PM, Dan Penoff wrote:
Just talked to Randy. He can help with the hose, in fact, he says he
has a unique way of cutting the bulk hose, whatever that means.
That is a “cut to fit” hose. Have him contact
On 13/06/2013 12:04 PM, Dieselhead wrote:
So if jabba becomes the new parts guy here will he be unbanned?
If it is unbanned, I don't wanna hear his lip. That means I will bail
out. That is even worse than losing Q.
This is a great group of people without him. Yes, even andrew!
Mitch,
That was me, I needed an alternator for my Toyota beater and the
belt is heavy and thick and seems to be a good quality. I would
order another one if I needed it.
Todd Smith
I have found that other brands don't last as long as the conti. One
(of many) good thing about Q was that
It's not my call and I am not going to get involved one way or
another, but I will say that I have re-established ties with Gary
and he has mellowed significantly, in my opinion. I think my
observations have some credence due to the fact that I was often on
the receiving end of his ire.
On a
The address on the
http://benzpartsforless.com/ site is:
4311 West Swamp Rd
Doylestown , PA 18902
Which is the address of Keenan Motors (authorized Mercedes-Benz dealer).
The few #'s I tested all came up, even if I wasn't able to navigate
through the site to find them.
Another dealer I found
No not really. He behaved badly but I would not say he burned his bridge. I
like jabba and I know he had problems, maybe they are resolved I don't know.
Sent from my iPhone
On Jun 13, 2013, at 1:25 PM, Randy Bennell rbenn...@bennell.ca wrote:
On 13/06/2013 12:04 PM, Dieselhead wrote:
So if
Yes! Maybe he'll have the NLA brake booster I need too! Thanks for the
nudge.
Jaime
On Thu, Jun 13, 2013 at 2:22 PM, Dieselhead 126die...@gmail.com wrote:
It's not my call and I am not going to get involved one way or another,
but I will say that I have re-established ties with Gary and
Gary has access to lots of stuff, but if the only part available is
something with a bad reputation (like Uro), he'll say so. Sadly, this is
the case for a lot of stuff, and its always changing.
For example, for a while, only MTC brand monovalves were available. He
called all over for me trying
On Jun 13, 2013 4:17 AM, Mitch Haley m...@voyager.net wrote:
dsereta...@yahoo.com wrote:
It seems they there are cases where
the identical part made in the same
factory is made to different
standards.
I'm not saying it happens, but if you
had a market where you could sell the
ones
It's possible. If not, he may know where you can find one.
Even before our beloved 123s were considered classic he was able to find stuff
for me that was NLA from MB.
Dan
On Jun 13, 2013, at 2:45 PM, Jaime Kopchinski jaime...@gmail.com wrote:
Yes! Maybe he'll have the NLA brake booster I
On Jun 13, 2013, at 12:26 PM, Chris James c_ja...@gmx.com wrote:
I'm really liking this site! Helps though if you look up the part #'s in
the EPC or elsewhere first. Excellent OE pricing! Have you actually
ordered from them before Rick K.?
No, I haven't yet. Probably next week. I am a cheap
This is the only rad hose listed on Jabba's site
Radiator Hose - Lower
List Price:
$ 33.50
Your Price:
$ 14.65
Quantity:
*Manufacturer:* APA/URO PARTS
*Part Number:*W0133-1633942
*Description:* Radiator Hose - Lower
Radiator Hose
pelicanparts.com has bulk hose ( this uro thing looks
No not really. He behaved badly but I would not say he burned his
bridge. I like jabba and I know he had problems, maybe they are
resolved I don't know.
Sent from my mbPhone
Badly is putting it mildly. If he provides all the veterans of his
flaming the list days $1000 of credit each for MB
Agreed, conti is the way to go. Still genuine MB in many cases, but some
other brands have appeared for genuine, like Optibelt. Also made in
Germany, appear to be good quality.
I think the last geniune belt I bought for my '95 E320 was a Mitsubishi
belt, oddly... with an MB star on it too.
Don't go by the website... call or email. Like Rusty was, the site isn't
an accurate representation of what he has access too.
But I think with hoses, Uro and Geniune may be all there is in some cases.
Jaime
On Thu, Jun 13, 2013 at 3:12 PM, Rich Thomas
richthomas79td...@constructivity.net
Hi Dan,
I have 3 old numbers for Randy:
800 741 5252
805 683 4020
805 683 3689
Called the 800 number but lady said she was not familiar with his name.
Do you have a different number than the other 2?
Thanks,
Gerry
On a related note, I spoke with Randy Steele this morning. He no longer
sells
This is what I have:
Randy Steele
European Parts Specialists
805-683-4020
mailto:epspa...@impulse.net
Dan
On Jun 13, 2013, at 3:24 PM, Gerry Archer arche...@embarqmail.com wrote:
Hi Dan,
I have 3 old numbers for Randy:
800 741 5252
805 683 4020
805 683 3689
Called the 800 number but
Andrew Strasfogel wrote:
Have you tried the Classic Center yet? They have GREAT service and offer
15% discount on OEM parts to MBCA members. They undercut my local
dealership by 15 percent.
Because your local dealership marks parts 0% above retail list?
Mitch.
Dan Penoff wrote:
It's not my call and I am not going to get involved one way or another, but I
will say that I have re-established ties with Gary and he has mellowed
significantly, in my opinion. I think my observations have some credence due to
the fact that I was often on the receiving end
You can still get the Bosch monovalve on ebay:
http://www.ebay.com/itm/NEW-BOSCH-OEM-MERCEDES-BMW-HEATER-WATER-MONO-VALVE-SOLENOID-DIAPHRAGM-REPAIR-KIT-/190801242075?pt=Motors_Car_Truck_Parts_Accessorieshash=item2c6ca3e7dbvxp=mtr#ht_4696wt_824
On Thu, Jun 13, 2013 at 3:28 PM, Dan Penoff
I sent Jabba an email so will see what he comes back with.
--R
On 6/13/13 3:20 PM, Jaime Kopchinski wrote:
Don't go by the website... call or email. Like Rusty was, the site isn't
an accurate representation of what he has access too.
But I think with hoses, Uro and Geniune may be all there is
I thought of that one last night while fixing supper, when I realized
after watching PBS news that I was being oppressed by the
currently-dominant social paradigm.
My clock keeps on ticking:
http://zapatopi.net/blog/?post=201305104610.paradigm_shift_clock_mk_ii_and_black_helicopter_hood_mural
Ah, thats Randy... I'm very tempted to buy at that price its quite
good. I think dealer list for new is $160 now.
Jaime
On Thu, Jun 13, 2013 at 3:39 PM, Andrew Strasfogel astrasfo...@gmail.comwrote:
You can still get the Bosch monovalve on ebay:
Reluctantly, I'm leaning toward dealer; the lean is hurting really bad, but
maybe I can get over it.
Wilton
- Original Message -
From: Curt Raymond curtlud...@yahoo.com
To: Diesel List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 2:10 PM
Subject: Re: [MBZ] 31 May order
And
Can you be our dealer? Seems most of the crap is really just standard web
front ends to their catalogue anyway. Maybe Rusty can snag you as a client
with the collective purchasing needs of the list allowing for thousands of
dinars to flow. Get the snarly kid Regina has to man the phones
Like the 2-year-old hose on my 350SDL compared to the 20-year-old original.
'Sure glad it blew only 3 or 4 blocks from home.
Wilton
- Original Message -
From: Rick Knoble rickkno...@hotmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 3:09 PM
Which car is BOYDOC getting?
BTW, #1 Grndson wanted to do another embassy internship in DC this summer,
(he enjoyed it so last summer, even with the walking and heat/humidity) but
he starts grad school in Chap Hill 21 June, so he had to let it go.
Wilton
- Original Message -
From:
Hendrick,
WHAT?? You're slipping mate. I fully expected it to be a Attaboy medal
with Oak Leaves and Free Shipping for Life
Gotta pick up the pace to hold your place mate.. ;))
Grant... AZ
On Wed, Jun 12, 2013 at 9:30 PM, Hendrik and Fay heni...@gmail.com wrote:
No no no that won't bloody
The nosey and curious have to know - where in the EU was the non-standard
Hendrick made?
On Thu, Jun 13, 2013 at 12:55 AM, Hendrik and Fay heni...@gmail.com wrote:
Hendrik
who was made in the EU but not to a standard
--
Non-standard OK Don (non-OK Don?)
made in MPLS
Might have more to do with costs I would think. The made in EU part has a
higher manufacturing and shipping cost to third world areas, so make the part
in the closer third world area to the same spec, and sell it on for a more
reasonable cost. No need to load up containers on large ships to
He did not want to fool with his former SD so the daughter unit is
getting the identical Mamabenz for a coupla weeks until I can get the
Boybenz sorted for her (mama likes her car, though they are generally
identical except her AC BLOWS ICE COLD). So driving the Mamabenz to CH
where she will
The chip maker deal! Make the chips all the same, then test them to see if you
get the one that blows up at high temp, or kacks at mid temp, then sell it on
as the low power chip instead. I am certain the intel chips are made that way.
They all have the same layout, but you get a dual core
He was grown in a tobacco field in England and then the Great Usurper
shipped him to the Antipodes to serve out his sentence for not paying
his usurpacious taxes.
--R
On 6/13/13 4:29 PM, OK Don wrote:
The nosey and curious have to know - where in the EU was the non-standard
Hendrick made?
You might like your mate, but a bloke is not well thought of. At least I do
not think they are the interchangeable Buddy and Pal used in USA. Then again,
buddy and pal usage is normally reserved for interchange with hey, A-hole! in
confrontations where harsh language is not used
clay
On Jun
he left on his own power from my recollection. There were some harsh words and
censure while he was off his meds, but his wrath on Banned was in full force
until he left
clay
On Jun 13, 2013, at 9:27 AM, dsereta...@yahoo.com wrote:
So if jabba becomes the new parts guy here will he be
The nosey and curious have to know - where in the EU was the non-standard
Hendrick made?
auf Deutschland
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
Jabba is fairly harmless. I enjoy his banter and do not mind at all his
return. It would liven the list greatly and make Banned less droll. AS for
parts, I am able to get the same URO stuff all over the web, and may just do
business with Tom @ classic center
clay
On Jun 13, 2013, at 11:58
'Don't know details. I'll ask Grndson if it's OK to pass his email address
to you/her?
Wilton
- Original Message -
From: Rich Thomas richthomas79td...@constructivity.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 4:49 PM
Subject: Re: [MBZ] Let's
Oh, I MEANT off NW coast of Europe, of course. ;)
Wilton
- Original Message -
From: clay redgh...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 4:53 PM
Subject: Re: [MBZ] New driver seat is in wow
You might like your mate, but a bloke
There was a Tom with Rusty - same guy? What happened to Rusty's Tom?
Wilton
- Original Message -
From: clay redgh...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 5:07 PM
Subject: Re: [MBZ] 350SDL parts
Jabba is fairly harmless. I
WILTON wrote:
There was a Tom with Rusty - same guy? What happened to Rusty's Tom?
Rusty should have sold Bimby to him.
Mitch.
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
Continental doesn't list radiator hoses anymore.
http://continental-direct.com/products.html
Gerry
From: Jaime Kopchinski jaime...@gmail.com
Don't go by the website... call or email. Like Rusty was, the site isn't
an accurate representation of what he has access too.
But I think with hoses,
On 13/06/2013 12:04 PM, Dieselhead wrote:
So if jabba becomes the new parts guy here will he be unbanned?
If it is unbanned, I don't wanna hear his lip. That means I will bail
out. That is even worse than losing Q.
This is a great group of people without him. Yes, even andrew!
Benzpartsforless seems to be having website problems. It won't go to the
parts lists.
Gerry
From: Chris James c_ja...@gmx.com
$58.47 OE @ benzpartsforless 201 501 43 82 (lower hose).
I'm really liking this site! Helps though if you look up the part #'s in
the EPC or elsewhere first. Excellent
What's the connect between the (Australian designed?) Canberra and B-47s if
any?
Gerry
Aussie Air Force flew some B-47's for a few years for weather recon, etc.
Probably in '60's or early '70's.
Wilton
- Original Message -
From: Hendrik and Fay heni...@gmail.com
To: Mercedes
Bando is OE for several American car brands. It's a Japanese company with a
plant in Kentucky. Think I'll try Bando if they make water hose for MBs.
Gerry
http://www.bandousa.com/html/number1supplier.html
From: WILTON wilt...@nc.rr.com
'Don't know 'bout all that; right now, I'm just needing
On Thu, 13 Jun 2013 12:35:25 -0400 WILTON wilt...@nc.rr.com wrote:
Yeah, but, sometimes, ya need to talk to somebody who knows the
territory, a la Professor Harold Hill. ;)
Professor Harold Hill?
Craig
___
http://www.okiebenz.com
For new and used parts
On 13/06/2013 5:18 PM, Craig wrote:
On Thu, 13 Jun 2013 12:35:25 -0400 WILTON wilt...@nc.rr.com wrote:
Yeah, but, sometimes, ya need to talk to somebody who knows the
territory, a la Professor Harold Hill. ;)
Professor Harold Hill?
Craig
___
From the
Seems to be working fine for me?
Also compare with (may be cheaper):
http://www.mymercedesparts.com
Different dealer, but same interface more shipping options (both UPS
FedEx).
If you can't find something on either site, let me know. I'll try to
help find it.otherwise drop them a note,
Thanks, Andrew.
The valve I need controls the vacuum going to the transmission on my '83
300D. It sits on top of the injector pump and is connected to the
accellerator linkage.
Gerry
From: Andrew Strasfogel astrasfo...@gmail.com
You can still get the Bosch monovalve on ebay:
On Thu, 13 Jun 2013 17:23:27 -0500 Randy Bennell rbenn...@bennell.ca
wrote:
On 13/06/2013 5:18 PM, Craig wrote:
Professor Harold Hill?
From the movie and probably stage show - The Music Man - if my memory
is accurate.
Your memory is accurate.
Yep
Wilton
- Original Message -
From: Mitch Haley m...@voyager.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, June 13, 2013 6:00 PM
Subject: Re: [MBZ] 350SDL parts
WILTON wrote:
There was a Tom with Rusty - same guy? What happened to Rusty's Tom?
Rusty
Try plugging in year, make, and model.
Gerry
From: Chris James c_ja...@gmx.com
Seems to be working fine for me?
Also compare with (may be cheaper):
http://www.mymercedesparts.com
Different dealer, but same interface more shipping options (both UPS
FedEx).
If you can't find something on
1 - 100 of 131 matches
Mail list logo
