Armand Chen wrote:
Hi all :-)
After I switched to OpenBSD, there are still some data in my old NTFS
partition. I've made the NTFS support into kernel, and successfully
mounted the NTFS partision.
The problem is, some filename of the data is encoded other than
ISO8859-1. In other UNIX-like
On 2006-01-27 01:42:13 +1100, Shane J Pearson wrote:
What an incredible load of tripe!...
This belongs on advocacy.
Hello all,
I have two questions:
1) What is the state of sasyncd in 3.8? (I'm currently running stable
without any patches). The only hint that there would be known bugs or
that sasyncd would be incomplete is this email:
http://archives.neohapsis.com/archives/openbsd/2005-10/1804.html.
2)
* Will H. Backman [EMAIL PROTECTED] [2006-01-26 23:15]:
By sending carefully crafted sequence of IP packet fragments, a remote
attacker can cause a system running pf with a ruleset containing a
'scrub fragment crop' or 'scrub fragment drop-ovl' rule to crash.
1: Has this been verified to
On Thu, 26 Jan 2006, Rob W wrote:
http://www.securityfocus.com/bid/16375 is minor but important enough to
report?
A way to remotly crash a OpenBSD box is minor?
If the number of systems affected is low, the answer may be yes. This
problem only exists if you enable specific scrubbing options
On Fri, Jan 27, 2006 at 10:07:33AM +0100, Otto Moerbeek wrote:
On Thu, 26 Jan 2006, Rob W wrote:
http://www.securityfocus.com/bid/16375 is minor but important enough to
report?
A way to remotly crash a OpenBSD box is minor?
If the number of systems affected is low, the answer may be
I have an OpenBSD gateway which share the Internet and use Squid.
Squid proxy work transparent, OpenBSD PF allow this thing :
rdr pass on fxp0 proto tcp to port www - 127.0.0.1 port 3128
I use Squid to filter web content like ad and pop-up (adzaper), I don't
use Squid for cache.
The problem is,
From: Chris Zakelj [EMAIL PROTECTED]
This is a denial of service, not a security exploit. Crashing a box
causes headaches, but the data within is still out of the reach of those
who would like to steal it.
It isn't important that people can crash your box remotely and make the
services provided
Nick Holland wrote:
...much bigger, if we get the 1G physical disk limit overcome in
OpenBSD).
er... 1T physical disk limit...
(hey, some of us old timers were really wowed by the first 1G drives.
Or the first 20M drives... We get our staggering amount of storage
units confused easily. :)
On Fri, 27 Jan 2006 06:43:35 -0500
Nick Holland [EMAIL PROTECTED] wrote:
Nick Holland wrote:
...much bigger, if we get the 1G physical disk limit overcome in
OpenBSD).
er... 1T physical disk limit...
(hey, some of us old timers were really wowed by the first 1G drives.
Or the first
Hi,
...on Fri, Jan 27, 2006 at 12:10:22PM +0200, Kiraly Zoltan wrote:
I use Squid to filter web content like ad and pop-up (adzaper), I don't
use Squid for cache.
The problem is, when i use Squid many webpage open slow, for example
sometimes i wait much in Firefox at Waiting for
Hi;
I am not sure what you are saying here, but if you think you are
having a DNS isse, then try adding this to your squid.conf:
dns_testnames localhost
Have you disabled caching? If this does not work, then you should
probably bring this up in the squid-users list,
[EMAIL PROTECTED]
On Fri, 27 Jan 2006, Alexander Hall wrote:
Hi!
I just noticed (the hard way) a strange behaviour of ifconfig. In short, if I
supply a netmask when removing an alias with ``-alias address'', it is not,
as one would expect, ignored, but rather used as the netmask for the primary
address of
On Fri, Jan 27, 2006 at 02:18:10PM +0100, Alexander Hall wrote:
Hi!
I just noticed (the hard way) a strange behaviour of ifconfig. In short,
if I supply a netmask when removing an alias with ``-alias address'',
it is not, as one would expect, ignored, but rather used as the netmask
for
Rob W wrote:
From: Chris Zakelj [EMAIL PROTECTED]
This is a denial of service, not a security exploit. Crashing a box
causes headaches, but the data within is still out of the reach of those
who would like to steal it.
It isn't important that people can crash your box remotely and make
On Thu, Jan 26, 2006 at 10:30:08PM -0500, Nick Holland wrote:
AndrC)s Delfino wrote:
What I'm trying to ask is this: if a user turns on the computer, and
can't log in, is it safe to power off the computer without using halt,
or shutdown, (ie. pressing the power off button)?
SHOULD you
For the archives:
On 1/22/06, Alexander Farber [EMAIL PROTECTED] wrote:
how could I please compile the in-tree Apache with -ggdb added and -O2
removed?
I've tried setting EXTRA_CFLAGS=-ggdb in src/Configuration,
but that file seems not to be used.
cd /usr/src/usr.sbin/httpd
make -f
Otto Moerbeek wrote:
On Fri, 27 Jan 2006, Alexander Hall wrote:
I just noticed (the hard way) a strange behaviour of ifconfig. In short, if I
supply a netmask when removing an alias with ``-alias address'', it is not,
as one would expect, ignored, but rather used as the netmask for the
Marco Pfatschbacher wrote:
On Fri, Jan 27, 2006 at 02:18:10PM +0100, Alexander Hall wrote:
Hi!
I just noticed (the hard way) a strange behaviour of ifconfig. In short,
if I supply a netmask when removing an alias with ``-alias address'',
it is not, as one would expect, ignored, but rather
guys do you have any idea if their's another package like webmin for openbsd?
what is your comment also about webmin.. is it safe to use?
thanks guys.. ;)
On Jan 27, 2006, at 8:46 AM, [EMAIL PROTECTED] wrote:
guys do you have any idea if their's another package like webmin
for openbsd?
No.
what is your comment also about webmin.. is it safe to use?
No.
thanks guys.. ;)
NP.
On Fri, 27 Jan 2006 [EMAIL PROTECTED] wrote:
guys do you have any idea if their's another package like webmin for openbsd?
what is your comment also about webmin.. is it safe to use?
thanks guys.. ;)
Been using it for years, .. of course, the first thing you do is restrict
all clients to
Hi,
I use squid in a similar environment too and have
learnt in comp.protocols.dns.bind that forwarders are evil.
Remove that line from your named.conf.
I also used adzap (and before - squeezeball) to
filter out ads for my home network hanging on ADSL
But then I stopped doing that and just
Hi,
I'm working on an amd64 box (Opteron 146) with a soft raid with
autoconfig in place. The soft raid works fine, but boot.conf is
somewhat weird. Some experimenting revealed that I have three
partitions which are recognized as boot partitions:
/dev/wd0a, /dev/wd1a, and /dev/raid0a.
On
Dear Customer,
At First Usa Bank the greatest responsability to our customer is the
safekeeping of confidential information you have entrusted to us and
using it in a responsable manner. A fundamental element of safeguarding
your confidential information is to provide protection against
yes, see here its only for pf i think
http://www.allard.nu/pfw/
-Thomas
On Fri, 2006-01-27 at 22:46 +0800, [EMAIL PROTECTED] wrote:
guys do you have any idea if their's another package like webmin for openbsd?
what is your comment also about webmin.. is it safe to use?
thanks guys.. ;)
On Fri, Jan 27, 2006 at 06:05:16PM +0100, Toni Mueller wrote:
- /etc/boot.conf ---
set timeout 30
boot /bsd.mpr
- /etc/boot.conf ---
The boot commands instructs it to boot there and then.
On 2006/01/27 17:30, John Wright wrote:
On Fri, Jan 27, 2006 at 06:05:16PM +0100, Toni Mueller wrote:
- /etc/boot.conf ---
set timeout 30
boot /bsd.mpr
- /etc/boot.conf ---
The boot commands instructs it to boot there and then.
'set image' is
On Friday, January 27, Toni Mueller wrote:
- /etc/boot.conf ---
set timeout 30
boot /bsd.mpr
- /etc/boot.conf ---
This should give me a 30 second pause before the machine boots the
named kernel, but instead, it boots _immediately_, so I have no
Hello list,
I'm not sure if this the right place to post this question, but I
couldn't find any other better list.
My problem is that I recently changed my OS on a i386 router from Linux
to OpenBSD (3.8). On that router I run Quagga and now I want to switch
to OpenBGPD, but I have problems
Greetings misc@,
Though I have been successfully running dhcpd myself for a few years
now, it has come to my attention when writing some scripts to help
maintain systems that there is no /var/run/dhcpd.pid file.
Is this by design? If so, is it possible to have it generate the pid
file on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Had originally posted a message Tuning NFS File Transfer Speed
and had eventually posted a Solved reply to it on the list.
That turned out to be erroneous. It did turn out to be a hardware
issue. Had some leaking capacitors on the old VIA Abit mobo
* Matthew S Elmore [EMAIL PROTECTED] [2006-01-27 20:55]:
Though I have been successfully running dhcpd myself for a few years
now, it has come to my attention when writing some scripts to help
maintain systems that there is no /var/run/dhcpd.pid file.
Is this by design?
yes. pid files are
* Bogdan Hojda [EMAIL PROTECTED] [2006-01-27 19:59]:
I tried the following configuration in OpenBGP's /etc/bgpd.conf, with no
success:
# macros
MyISP=82.xxx.xxx.yyy
# global configuration
AS xxx66
router-id 82.xxx.xxx.xxx
you probably don't want this, bgpd picks one itself. you
On Fri, 27 Jan 2006, Denny White wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Had originally posted a message Tuning NFS File Transfer Speed
and had eventually posted a Solved reply to it on the list.
That turned out to be erroneous. It did turn out to be a hardware
issue. Had
On Fri, Jan 27, 2006 at 07:49:07PM +0200, Bogdan Hojda wrote:
Hello list,
I'm not sure if this the right place to post this question, but I
couldn't find any other better list.
My problem is that I recently changed my OS on a i386 router from Linux
to OpenBSD (3.8). On that router I run
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Today Otto Moerbeek contributed the following:
On Fri, 27 Jan 2006, Denny White wrote:
Had originally posted a message Tuning NFS File Transfer Speed
and had eventually posted a Solved reply to it on the list.
That turned out to be erroneous. It
37 matches
Mail list logo