http://www.oreillynet.com/pub/a/sysadmin/2007/02/15/evaluating_firewalls.html
...have fun...
greetings
Andre Ruppert
On Sun, Feb 25 2007 at 06:20, c l wrote:
Finally got this to work. Here's the config that ended up working.
I'm not sure why I didn't notice before but the quick mode stuff wasn't
setup correctly.
ipsec.conf
ike esp from 192.168.1.0/24 to 10.10.0.0/16 peer 2.2.2.2 \
main auth
On Sun, Feb 25, 2007 at 06:10:43PM +0100, Stefan Kell wrote:
Hallo list,
I want to use this machine as a dual-boot system together with windows. It
is connected to a standard PS2-KVM, no USB-mouse or keyboard. Installation
of both Windows and OpenBSD 4.0 from CDs worked without any
On Sun, Feb 25, 2007 at 06:10:43PM +0100, Stefan Kell wrote:
I want to use this machine as a dual-boot system together with windows. It
is connected to a standard PS2-KVM, no USB-mouse or keyboard. Installation
of both Windows and OpenBSD 4.0 from CDs worked without any problems. But
now if I
I have a pair of 3.9 pf firewalls running CARP. I have two ethernet
connections to my provider who is running Cisco HSRP. When they reload the
active router or bounce the active interface, then the Ciscos can no longer
see the CARP virtual interface until I cause a CARP failover by rebooting
Hi list,
I have two servers, one running 4.0 and one with 3.9, they are used as web
servers, with a
mysql database running on them. Both are more or less idle, but I have seem
these messages
in /var/log/messages on both servers:
bsd: uvm_mapent_alloc: out of static map entries
I found this
hello,
does someone have information or used the host class ACM?
thanks
___
Dicouvrez une nouvelle fagon d'obtenir des riponses ` toutes vos questions !
Profitez des connaissances, des opinions et des expiriences des
Hello Nick,
Original-Nachricht
Datum: Sun, 25 Feb 2007 21:26:42 -0500
Von: Nick Holland [EMAIL PROTECTED]
An: misc misc@openbsd.org
CC:
Betreff: Re: keyboard lockup, KVM, dual-boot
Stefan Kell wrote:
Hello Nick,
On Sun, 25 Feb 2007, Nick Holland wrote:
...
It sounds
On Mon, Feb 26, 2007 at 11:36:38AM +0100, Sebastian Reitenbach wrote:
I found this thread, where someone has seen the same problem:
http://marc.theaimsgroup.com/?l=openbsd-techm=115959929717470w=2
(...)
Is there anything else I can do to keep the machines up and running?
Unfortunately, no.
...and OpenBSD, of course...
sorry, I forgot
Andre
On 2007/02/26 07:17, Julien TOUCHE wrote:
Stuart Henderson wrote on 25/02/07 22:55:
ports/comms/sredird to run a terminal server on OpenBSD,
ftp://ftp.opengear.com/opengear-serial-client-2.0.9p0.tar.gz
might work to let you connect to another terminal server as
if it were a local port,
On 2007/02/25 20:05, Daniel Ouellet wrote:
But I was wondering however if it wouldn't be possible to use the 72xx
routers as dumb media converter?
I don't think you can do this exactly, but you can run OSPF on them,
let OpenBSD handle the main BGP sessions, and feed back a small BGP
table to
On Mon, Feb 26, 2007 at 10:13:45AM +, sof bo wrote:
hello,
does someone have information or used the host class ACM?
These are supported by umodem(4)
http://www.openbsd.org/cgi-bin/man.cgi?query=umodemsektion=4
Ola,
O Ralf Braga (RalfBraga) esta a construir a sua rede de amigos online em :
http://pt.facebox.com
Aceita a sua amizade e junta-te ao Facebox!
http://pt.facebox.com/go/register/id=1046589614i=t71
Criar o teu prsprio perfil
- um blog
- um albzm fotografico
- um livro de visitas
- a tua rede
Hi there,
I got a Thinkpad Z61p
(http://www.ciao.de/Lenovo_ThinkPad_Z61p_9452__2342038)
with a 1920x1200 WUXGA widescreen display driven by an ATI
Mobility FireGL V5200 - PCI Express x16 adaptor.
Last weekend I tried to install OpenBSD 4.0 onto this box -
everything essential works fine, except
Hi,
As some of you might know, I self-publish my books, which gives me
full control of the contents, for better or worse. Because of the way
my printers work, I must typeset my manuscripts to match their funky
specs and sometimes I have a few blank pages left at the end. I need
to pay for them
Hi Sebastian,
I don't know if this will help at all, but I remember having a
Cyrus-IMAP server that always had a fair amount of disk I/O and tons of
open files that would exhibit the similar behavior. Unfortunately, it
wasn't running GENERIC (had RAIDFRAME and a couple of other things
For my laptop (whole different brand/chipset, but similar problem), I
had to manually make a ModeLine. After that I had no problem at all
using 1920x1200.
--
Darrin Chandler | Phoenix BSD Users Group
[EMAIL PROTECTED] | http://bsd.phoenix.az.us/
Hi everyone,
I'm having some issues with an ipsec connection with vpnc (isakmp is
not an option, since does not support xauth, and I don't control the
other end) from an OpenBSD firewall/router to a Cisco device.
I think problems could be natt related so I would like to eliminate
nat from the
On Mon, Feb 26, 2007 at 09:36:10AM -0700, Darrin Chandler wrote:
For my laptop (whole different brand/chipset, but similar problem), I
had to manually make a ModeLine. After that I had no problem at all
using 1920x1200.
Well, would you like to send me your xorg.conf? I've seen
various ones
Hi,
unfortunately the first call for hardware donations wasn't really that
successful, we got a few interesting pieces of hardware, but we are
still lacking major parts. So here's the second call for donations.
In order to have a successful event we need the following pieces of
hardware:
- 2
On 2/26/07, Samuel Moqux [EMAIL PROTECTED] wrote:
I'm having some issues with an ipsec connection with vpnc (isakmp is
not an option, since does not support xauth, and I don't control the
other end) from an OpenBSD firewall/router to a Cisco device.
I think problems could be natt related so I
Monitoring the total bandwidth through the bridge is easy with `bwm-ng`
or `ifstat`. The problem is that I want to see the bandwidth on a per-IP
address basis. I can do this with `ntop` on an interface that has an IP
address, but when I try to use it on the bridge I get:
# ntop -i bridge0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ok Henning.
I'm using 3.9, and my config is:
group peering AS {
remote-as
neighbor $principal {
descr Link Principal
announce all
local-address $mypeer1
On Mon, Feb 26, 2007 at 06:29:40PM +0100, Anselm R. Garbe wrote:
On Mon, Feb 26, 2007 at 09:36:10AM -0700, Darrin Chandler wrote:
For my laptop (whole different brand/chipset, but similar problem), I
had to manually make a ModeLine. After that I had no problem at all
using 1920x1200.
Check out bandwidthd, i dont think its in ports or pkgs, however it
does an excellent job, gives per IP graphs and total bandwidth used.
never tried it on a bridge thou
On 22/02/07, Ross Davis [EMAIL PROTECTED] wrote:
I am running OpenBSD 4.0 and have a bridge set up between two
interfaces:
* Anderson Nadal [EMAIL PROTECTED] [2007-02-26 19:14]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ok Henning.
I'm using 3.9, and my config is:
well, this is obviously not your full config, but in this case, I am
reasnably certain the problem is fixed. Now is a good time to give
Stefan Kell wrote:
Hello Nick,
Original-Nachricht
Datum: Sun, 25 Feb 2007 21:26:42 -0500
Von: Nick Holland [EMAIL PROTECTED]
An: misc misc@openbsd.org
CC:
Betreff: Re: keyboard lockup, KVM, dual-boot
Stefan Kell wrote:
Hello Nick,
On Sun, 25 Feb 2007, Nick Holland wrote:
Ok, i will try a upgrade to 4.0 or 4.1
I know about logging update enabled, i just told you. :)
Thanks for your help.
[]'s
Nadal
Nco discuta com idiotas, eles te levam ati o nmvel deles e te vencem por serem
experientes
+---+
| Anderson
Hi,
I got some troubles. My openbsd hasn't any usb support, i tried to moun and
usb pen drive, or configure my usb printer with no good results.
I'm using downloaded openbsd from the ftp ( using cd40.iso to boot and get
the install program then download the rest trough ftp ), and Jon Drews
On Mon, 26 Feb 2007, Tang Tse wrote:
Hi,
I got some troubles. My openbsd hasn't any usb support, i tried to moun and
usb pen drive, or configure my usb printer with no good results.
I'm using downloaded openbsd from the ftp ( using cd40.iso to boot and get
the install program then
Yes, it's up. Maybe an unsupported usb chipset?
2007/2/26, Otto Moerbeek [EMAIL PROTECTED]:
On Mon, 26 Feb 2007, Tang Tse wrote:
Hi,
I got some troubles. My openbsd hasn't any usb support, i tried to moun
and
usb pen drive, or configure my usb printer with no good results.
I'm
Hi Tico, Pedro,
have time to debug the issue since it was a production box, so I just
changed the /usr/src/sys/uvm/uvm_map.h KMAP_ENT #define to be 4000
instead of 1000, recompiled the kernel, and also added crontab entries
to stop and start most of the daemons running on that machine
On Mon, 26 Feb 2007, Tang Tse wrote:
Yes, it's up. Maybe an unsupported usb chipset?
unsupported devices show up in the dmesg as not configured. So your
USB hardware might be broken, or maybe it is hiding behind an PCI
bridge or something like that (though that is pure speculation). Try
booting
when I try to connect to kadmin remote server (MIT)
from openbsd SSH login gateway, the application hangs:
kadmin add --random-key host/myhost.mydomain
administrator/[EMAIL PROTECTED]'s Password:
it hangs...
I tryed to dobthis because I can;t logon using SSH
I have this error:
Feb 26
RJ45 wrote:
when I try to connect to kadmin remote server (MIT)
from openbsd SSH login gateway, the application hangs:
kadmin add --random-key host/myhost.mydomain
administrator/[EMAIL PROTECTED]'s Password:
it hangs...
i'm guessing it hangs b/c you don't have this particular KDC as your
ports/comms/sredird to run a terminal server on OpenBSD,
i've installed sredird and it seems to be only telnet to local openbsd
serial port.
what i want is local openbsd serial to remote/telnet serial port ... :(
ftp://ftp.opengear.com/opengear-serial-client-2.0.9p0.tar.gz
might work to let
I recently had a crashed disk. I recovered from backup, and made some
changes to fstab.
Now I can't get postgresql to start.
I get an error that no controlling tty. If I try to start it anyway
it tells me that postmaster isn't in the same directory as pg_ctl (but
it is).
Maybe somebody else
sh: No controlling tty (open /dev/tty: Permission denied)
sh: cannot create /dev/null: Permission denied
Did you tighten up any permissions?
# cd /dev; ls -al tty null
crw-rw-rw- 1 root wheel2, 2 Feb 26 22:29 null
crw-rw-rw- 1 root wheel1, 0 Feb 26 22:25 tty
On 2007/02/26 13:39, Bryan Irvine wrote:
sh: No controlling tty (open /dev/tty: Permission denied)
sh: cannot create /dev/null: Permission denied
this all points to permissions on /dev being wrong.
(cd /dev;sh MAKEDEV all), I would untar the relevant OS distribution
*.tgz over the top as well
On Mon, Feb 26, 2007 at 01:39:16PM -0800, Bryan Irvine wrote:
sh: No controlling tty (open /dev/tty: Permission denied)
[...]
sh: cannot create /dev/null: Permission denied
Use ls(1) to see what's wrong with /dev (probably just empty), then
use MAKEDEV(8) to repair it.
Ciao,
Kili
--
ah this did it. I'm not sure why it was all messed up. As far as I
recall I didn't mess with /dev hr
ah well MAKEDEV all fixed it. Everything is ok now.
On 2/26/07, Stuart Henderson [EMAIL PROTECTED] wrote:
On 2007/02/26 13:39, Bryan Irvine wrote:
sh: No controlling tty (open
On 2007/02/26 22:22, Julien TOUCHE wrote:
ftp://ftp.opengear.com/opengear-serial-client-2.0.9p0.tar.gz
might work to let you connect to another terminal server as
if it were a local port, I don't know whether it works on
OpenBSD or not though.
seems configure has never been used on
Hi All,
I don't know if many of you already tried to run OpenBSD on Xen as a HVM
guest, but here is a small report of my attempts this evening.
The virtual server runs on a debian sarge with xen packages from the
backports debian repository. Hardware is a dell 2950 with cpu
virtualisation
* Nikolay Sturm [2007-02-26]:
unfortunately the first call for hardware donations wasn't really that
successful, we got a few interesting pieces of hardware, but we are
still lacking major parts. So here's the second call for donations.
It looks like I messed up the words, all we are asking
When will we ever see binary updates for OpenBSD? Taking a system
off-line for over 20 hours to do a source code rebuild is just too long,
and just tracking RELEASE means running an insecure system.
Binary updating - try it, you'll like it!
On Mon, 26 Feb 2007 22:31:08 -0600, Default User wrote:
When will we ever see binary updates for OpenBSD? Taking a system
off-line for over 20 hours to do a source code rebuild is just too long,
and just tracking RELEASE means running an insecure system.
Binary updating - try it, you'll like
Hello,
I have problem with assigning IP addresses to wireless clients using
DHCP. I have two D-Link DWL-G700AP access points and turned their DHCP
servers off. They are connected to my wired network, where my OpenBSD
server resides. I have configured OpenBSD as DHCP server and it works
fine
Shohrukh Shoyokubov wrote:
Hello,
I have problem with assigning IP addresses to wireless clients using
DHCP. I have two D-Link DWL-G700AP access points and turned their DHCP
servers off. They are connected to my wired network, where my OpenBSD
server resides. I have configured OpenBSD as
On 2/26/07, Shohrukh Shoyokubov [EMAIL PROTECTED] wrote:
Hello,
I have problem with assigning IP addresses to wireless clients using
DHCP. I have two D-Link DWL-G700AP access points and turned their DHCP
servers off. They are connected to my wired network, where my OpenBSD
server resides. I
On 2/26/07, Shohrukh Shoyokubov [EMAIL PROTECTED] wrote:
Hello,
I have problem with assigning IP addresses to wireless clients using
DHCP. I have two D-Link DWL-G700AP access points and turned their DHCP
servers off. They are connected to my wired network, where my OpenBSD
server resides. I
Just curious - why are you using a system that you don't understand
the philosophy of? No, that came out wrong. Why aren't you trying to
better understand the system you are using?
On 2/26/07, Default User [EMAIL PROTECTED] wrote:
When will we ever see binary updates for OpenBSD? Taking a
52 matches
Mail list logo
