Did you turn off chroot?
Also, why is Starting Pure-FTPd in the log?
On 11/16/08, Andrei Pirvan [EMAIL PROTECTED] wrote:
Hello
The problem I have is that default apache can't load PHP module. PHP
was installed from packages (php5-core-5.2.6.tgz), so here is nothing
custom made. The only
On 17/11/2008, at 7:37 PM, Andrei Pirvan wrote:
1. Why does it say Starting Pure-FTPd? Have no ideea. Anyway,
Pure-FTPd is already installed on the system, but don't know why it
shows here.
[snip]
Let's go back to the Pure-FTPd - is your apachectl shell script broken?
/usr/sbin/apachectl
On 02:01:19 Nov 17, Daniel Ouellet wrote:
This doesn't apply here because the library is pre-loaded before the
httpd is chrooted.
More details:
Pre-loading Shared Libraries
To extend the functionality of the webserver it can dynamically load
shared libraries, e.g. a database access
Thanks to all of you for ideas. Trying to figure out what was different
from a fresh install, I remembered that I mounted /var partition in
memory, so I checked the flags and found it it was mounted with noexec,
and disabling that fixed my problem. Thanks again for your time.
Dan wrote:
I am trying to set up an encrypted wireless network using at least WEP
or, if possible WPA-PSK. I know WPA-PSK is a very new functionality,
I wouldn't call it _very_ new... It's been around for some time now.
and wonder if anyone is using it successfuly. I have tried WEP and
Denny White wrote:
I've always tried to do a fresh install any time possible,
and then copy all my backed up /home and /data stuff back
to the new installed system. I'm just trying to figure out
if there's a way to keep those 2 slices intact while wiping
out and recreating everything else, i.e.,
Hi.
I have ftp server on vsftpd on ip 192.168.0.2 and a router 192.168.0.1. All
ftp connections to 192.168.0.2 are fine but connections to my ext. ip (e.g.
78.78.78.78) are refused.
Here's part of my pf.conf:
# WAN
vpn_if=tun0
# LAN
int_if=vr1
# External Address
ext_addr=78.78.78.78
# Server
Hi.
I have ftp server on vsftpd on ip 192.168.0.2 and a router 192.168.0.1. All
ftp connections to 192.168.0.2 are fine but connections to my ext. ip (e.g.
78.78.78.78) are refused.
Here's part of my pf.conf:
# WAN
vpn_if=tun0
# LAN
int_if=vr1
# External Address
ext_addr=78.78.78.78
# Server
I try to mount an USB disk using FAQ14
(http://www.openbsd.org/faq/faq14.html)
dmesg:
umass0 at uhub0 port 4 configuration 1 interface 0 Cypress Semiconductor
USB2.0 Storage Device rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0:
On Mon, Nov 17, 2008 at 12:45:47PM +0100, Christophe Rioux wrote:
I try to mount an USB disk using FAQ14
(http://www.openbsd.org/faq/faq14.html)
dmesg:
umass0 at uhub0 port 4 configuration 1 interface 0 Cypress Semiconductor
USB2.0 Storage Device rev 2.00/0.01 addr 2
umass0: using SCSI
Denny White wrote:
I've always tried to do a fresh install any time possible,
and then copy all my backed up /home and /data stuff back
to the new installed system. I'm just trying to figure out
if there's a way to keep those 2 slices intact while wiping
out and recreating everything else,
Christophe Rioux wrote:
I try to mount an USB disk using FAQ14
(http://www.openbsd.org/faq/faq14.html)
dmesg:
umass0 at uhub0 port 4 configuration 1 interface 0 Cypress Semiconductor
USB2.0 Storage Device rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
On Mon, Nov 17, 2008 at 07:03:35AM -0500, Douglas A. Tutty wrote:
On Mon, Nov 17, 2008 at 12:45:47PM +0100, Christophe Rioux wrote:
I try to mount an USB disk using FAQ14
(http://www.openbsd.org/faq/faq14.html)
dmesg:
umass0 at uhub0 port 4 configuration 1 interface 0 Cypress
On Mon, 17 Nov 2008, Andrei Pirvan wrote:
Hello
# apachectl configtest
Starting Pure-FTPd
Processing config directory: /var/www/conf/modules/*.conf
Processing config file: /var/www/conf/modules/php5.conf
Syntax error on line 1 of /var/www/conf/modules/php5.conf:
Cannot load
Estimado,
Pasamos a informar las ofertas del mes de Noviembre:
Reproductores MP3:
Reproduce MP3 - Trae Radio FM - Grabador de Voz - Funciona tambien como Pendrive
MP3 1 GIGA - $ 105
MP3 2 GIGA - $ 125
MP3 4 GIGA - $ 190
Reproductores MP4:
Reproduce
One simple thing that i will try is:
If is already installed OpenBSD 4.2 and wants to install 4.3 or 4.4 , first
take a look at the /etc/fstab file and write down the name of the /home
partition
/dev/wd0h /home ffs rw,nodev,nosuid 1 2
When installing the new version leave untouched that
To all:
I've noticed that my soekris net4501 box constantly reboots with
openbsd 4.4 patchlevel 005. It's just a pf/nat router on a
residential broadband cable modem. My guess is perhaps there is
something wrong with the
actual sis0 interface?.?.? Anybody else having these problems?
My apologies if this has already been addressed, but I couldn't find
it in the man pages or mailing list archives.
Is there a way to enable logging of network interface state changes on
OpenBSD 4.3 or 4.4? This is mostly for forensic purposes - obviously
I'll know if my firewall loses its
On Mon, Nov 17, 2008 at 10:35 AM, (private) HKS [EMAIL PROTECTED] wrote:
My apologies if this has already been addressed, but I couldn't find
it in the man pages or mailing list archives.
Is there a way to enable logging of network interface state changes on
OpenBSD 4.3 or 4.4? This is mostly
Yuriy A. Dmitrishin([EMAIL PROTECTED])@2008.11.17 12:47:51 +0200:
Hi.
I have ftp server on vsftpd on ip 192.168.0.2 and a router 192.168.0.1. All
ftp connections to 192.168.0.2 are fine but connections to my ext. ip (e.g.
78.78.78.78) are refused.
I think you are missing pass out tcp on
Try this:
replace this line:
pass in on $vpn_if inet proto tcp to $ext_addr port 21 \
flags S/SA keep state
with this:
pass in on $vpn_if inet proto tcp to $Srv port 21 \
flags S/SA keep state
Remember rdr's happen before filtering, so when pf see's this packet it will
have already been
On Mon, Nov 17, 2008 at 12:49 PM, Daniel Melameth [EMAIL PROTECTED] wrote:
On Mon, Nov 17, 2008 at 10:35 AM, (private) HKS [EMAIL PROTECTED] wrote:
My apologies if this has already been addressed, but I couldn't find
it in the man pages or mailing list archives.
Is there a way to enable
Hello
has someone setup a vpn tunnel between openbsd and an iphone ?
it seems ipsec part is strictly limited to cisco ipsec with a user
account/password so not good for us.
Else there is pptp and l2tp but i'm not sure there is anything in base
to do this.
Ports seems to only have pptp as a
PoPToP is in ports.
On 11/17/08, jul [EMAIL PROTECTED] wrote:
Hello
has someone setup a vpn tunnel between openbsd and an iphone ?
it seems ipsec part is strictly limited to cisco ipsec with a user
account/password so not good for us.
Else there is pptp and l2tp but i'm not sure there is
Hi all,
At work I've got a server with an LSI MegaRAID (dmesg below) that
suddenly seems to be killing hard drives. Last Thursday I had one drive
fail, and the system didn't begin rebuilding onto the hot spare until I
rebooted.
Today I lost another drive in the same safte0. I pulled
Trying to establish an ipsec tunnel to a debian linux box with openswan,
using this entry in ipsec.conf:
ike active esp from 192.168.1.0/24 to 192.168.2.0/24 peer a.b.c.d srcid
[EMAIL PROTECTED] dstid [EMAIL PROTECTED] psk xxx
I get 'PAYLOAD MALFORMED' in the middle of the phase 1
On Nov 11, 2008, at 3:10 PM, Johan Strvm wrote:
Hi list,
okay, I'm doing my tricky VLAN setups now again ;) This time I got a
OpenBSD 4.4 box, running inside a VMWare ESXi machine. It got two
interfaces, em0 and em1. em0 is external network, and em1 is host
interface for a bunch of VLAN
Jacob Meuser wrote:
I saw the suggestion to read tech@ in another thread but saw no (recent)
diffs there that I believe apply to this machine.
one thing I'm trying to do is get rid of the static mixer definitions
in azalia_codec.c. this exposes all the controls instead of a limited
On 17 November 2008 c. 20:35:33 (private) HKS wrote:
My apologies if this has already been addressed, but I couldn't find
it in the man pages or mailing list archives.
Is there a way to enable logging of network interface state changes on
OpenBSD 4.3 or 4.4? This is mostly for forensic
On Mon, Nov 17, 2008 at 11:34:01PM +0200, Alexey Suslikov wrote:
Jacob Meuser wrote:
I saw the suggestion to read tech@ in another thread but saw no (recent)
diffs there that I believe apply to this machine.
one thing I'm trying to do is get rid of the static mixer definitions
in
Girish Venkatachalam wrote:
On 02:01:19 Nov 17, Daniel Ouellet wrote:
This doesn't apply here because the library is pre-loaded before the
httpd is chrooted.
More details:
Pre-loading Shared Libraries
To extend the functionality of the webserver it can dynamically load
shared
Hi,
I am trying to set up a redirect (on a local lan) using relayd (using
external websites for now as a test):
The relay is on a soekris running 4.4-release. Only one interface is
up on the soekris (sis0).
Relayd.conf:
---8---
table sites {bmth.ac.uk, xe.com}
#relay fun-sites {
#listen
On 2008-11-17, Christoph Leser [EMAIL PROTECTED] wrote:
21:38:55.438591 a.b.c.d.500 u.v.w.x.500: [udp sum ok] isakmp v1.0
exchange ID_PROT
cookie: 251068307c823c51-5086ce0f33dfbb37 msgid: len:
92
payload: ID len: 9336 [|isakmp] [ttl 0] (id 1, len 120)
The len
So any resolution on the apache redirection? When I go to the website,
I get the Connection Interrupted error. This only occurs when both
routers are on. Oddly enough, when I ssh into the virtual IP, ssh
traffic doesn't get jumbled up because of the ip balancing. I suspect
I may have to up the
On 12:36:00 Nov 17, Johan Beisser wrote:
PoPToP is in ports.
I dunno a thing about iPhone but there is also
/usr/ports/net/pptp
-Girish
On 15:34:47 Nov 17, Jorge Valbuena wrote:
One simple thing that i will try is:
If is already installed OpenBSD 4.2 and wants to install 4.3 or 4.4 , first
take a look at the /etc/fstab file and write down the name of the /home
partition
/dev/wd0h /home ffs rw,nodev,nosuid 1 2
When
I suspect I'm getting this connection reset error because:
IN---ROUTERS---WEB SERVER1
T---ROUTERW---WEB SERVER2
SW is switch here.
If one router is on, it has carp0 and carp1 on either side and it can
send the request to the servers which may be load-balanced which is
fine. But when I
On Mon, Nov 17, 2008 at 10:50:13AM +0100, Alexander Hall spoke thusly:
Denny White wrote:
I've always tried to do a fresh install any time possible,
and then copy all my backed up /home and /data stuff back
to the new installed system. I'm just trying to figure out
if there's a way to keep
At work I've got a server with an LSI MegaRAID (dmesg below) that
suddenly seems to be killing hard drives. Last Thursday I had one drive
fail, and the system didn't begin rebuilding onto the hot spare until I
rebooted.
I would hope that the controller isn't killing drives.
Can we
On Mon, Nov 17, 2008 at 07:04:31AM -0500, Nick Holland spoke thusly:
Denny White wrote:
I've always tried to do a fresh install any time possible,
and then copy all my backed up /home and /data stuff back
to the new installed system. I'm just trying to figure out
if there's a way to keep
Original-Nachricht
Datum: Mon, 17 Nov 2008 01:14:46 -0600
Von: Denny White [EMAIL PROTECTED]
An: OpenBSD Questions misc@openbsd.org
Betreff: Fresh install question
I've always tried to do a fresh install any time possible,
and then copy all my backed up /home and
On Tue, Nov 18, 2008 at 06:58:22AM +0530, Girish Venkatachalam spoke thusly:
On 15:34:47 Nov 17, Jorge Valbuena wrote:
One simple thing that i will try is:
If is already installed OpenBSD 4.2 and wants to install 4.3 or 4.4 ,
first take a look at the /etc/fstab file and write down the
42 matches
Mail list logo
