Re: 350MHz IBM Intel Pentium II runs 5.9 fine

On 2016-12-01 22:01, Aaron Mason wrote: I've got two Sun Netra X1s (400MHz ultraSPARC IIe, 2GB RAM, 2x40GB drives) with 5.9 installed, they crash after awhile but I suspect that's a cooling issue since these things run pretty hot. I'd use them as firewalls but I can't push any more than ~50Mbps

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

I've got two Sun Netra X1s (400MHz ultraSPARC IIe, 2GB RAM, 2x40GB drives) with 5.9 installed, they crash after awhile but I suspect that's a cooling issue since these things run pretty hot. I'd use them as firewalls but I can't push any more than ~50Mbps through them and I've got a 100/40 fibre

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

On a similar note, I have a Sun E6K (circa 1996, 30x 400Mhz CPU's 30GB of RAM) running 6.0 like a dream, with some minor patches to support more than 8 disks in softraid 5.

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Could just be some garbage IBM machines of that era would spit out to confuse anything not-Winders, as part of an agreement with Microshart. Might pull out an old machine, give it some NICs and make it a firewall. Got an old Lacie 1U storage appliance with a VIA C7 mobo, just needs an additional

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Craig Skinner wrote: Hi, On Wed, 30 Nov 2016 17:09:13 +0100 butresin wrote: On 16.11.29Tue 14:12, Craig Skinner wrote: real mem = 200740864 (191MB) avail mem = 184385536 (175MB) ... spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3 spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity

Re: 5.8 EOL

Alessandro Baggi wrote: Il 01/12/2016 17:01, Marko Cupać ha scritto: On Thu, 1 Dec 2016 15:59:41 +0100 Alessandro Baggi wrote: Hi list, I've installed some years ago OpenBSD 5.8 on apu with 3 nics. I've tried to search but no look. What is the EOL for OpenBSD 5.8?

Re: 5.8 EOL

Alessandro Baggi wrote: Hi list, I've installed some years ago OpenBSD 5.8 on apu with 3 nics. I've tried to search but no look. What is the EOL for OpenBSD 5.8? Thanks in advance. 1 September 2016 when 6.0 was released. The only support versions are the current and the immediately

Installer kernel shuts down root hub

Hello, When I boot the installer it shuts down the root hub Intel Compute Stick, Intel Atom z3735f (x86-64) Bay Trail Obtained image from http://mirror.jmu.edu/pub/OpenBSD/6.0/amd64/install60.fs Transferred to USB stick using Linux dd command. Also tried with windows32image writer. Booted up

Announcing OSS-Fuzz: Continuous Fuzzing for Open Source Software

Hello, https://testing.googleblog.com/2016/12/announcing-oss-fuzz-continuous-fuzzing.html OSS-Fuzz is launching in Beta right now, and will be accepting suggestions for candidate open source projects. Apply here: https://github.com/google/oss-fuzz#accepting-new-projects imho a great

Re: PCI Express wireless adapter supported under OpenBSD

> From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of > If you really want to use hostap and are having trouble finding a > supported pcie card, it might be easier to find a supported athn or > ral minipcie card and a pcie carrier, this sort of thing: > >

Re: long fat pipe problem

On 2016-11-29, gwes wrote: > I've got 2 6.0 systems: one in BOS one in LA. Transit > time is about 100ms. There's adequate bandwidth end-to-end. > > I can only get 1.5 - 2.5 MB/sec due to the long fat > pipe problem: the receiving system won't open the window > large enough to let

Re: ftp(1) downloads a broken file; curl(1) doesn't

On 2016-11-29, Jan Vlach wrote: > this is unrelated to OpenBSD and is probably a bug in blocklist.php on server > side. (User agent processing? ...) You'd see this in tcpdump, if you had this > debugged properly. > HTTP/1.1 200 OK > Date: Tue, 29 Nov 2016 12:38:49 GMT > Server:

Re: PCI Express wireless adapter supported under OpenBSD

On 2016-11-30, C. L. Martinez wrote: > Hi all, > > I would like to install OpenBSD on a HP Microserver Gen8 to act as a > firewall and hostap. I am searching what components I need and I have a doubt > about what wireless interface I need to buy to use it as a hostap

Re: 5.8 EOL

On 2016-12-01, Alessandro Baggi wrote: > How do you provide to security patch for 5.5? Patches to 5.5 are provided in the form of an upgrade to a current supported release.

Re: 5.8 EOL

Skickat från min "enhet" :-) > 1 dec. 2016 kl. 15:59 skrev Alessandro Baggi : > > Hi list, > I've installed some years ago OpenBSD 5.8 on apu with 3 nics. > I've tried to search but no look. What is the EOL for OpenBSD 5.8? > > Thanks in advance. > Not sure that "end

Re: 5.8 EOL

Il 01/12/2016 17:01, Marko Cupać ha scritto: On Thu, 1 Dec 2016 15:59:41 +0100 Alessandro Baggi wrote: Hi list, I've installed some years ago OpenBSD 5.8 on apu with 3 nics. I've tried to search but no look. What is the EOL for OpenBSD 5.8? Thanks in advance.

Re: trouble shooting print errors

Anonymous coward wrote: > I am getting "Broken Pipe" and or "Scheduler not responding" when > attempting to print from a laser desk printer directly attached to usb. > OpenBSD 6.0 recognizes the printer in dmesg and when plugged into the > usb port. > > I have been running OpenBSD for several

Re: 5.8 EOL

On Thu, 1 Dec 2016 15:59:41 +0100 Alessandro Baggi wrote: > Hi list, > I've installed some years ago OpenBSD 5.8 on apu with 3 nics. > I've tried to search but no look. What is the EOL for OpenBSD 5.8? > > Thanks in advance. >

5.8 EOL

Hi list, I've installed some years ago OpenBSD 5.8 on apu with 3 nics. I've tried to search but no look. What is the EOL for OpenBSD 5.8? Thanks in advance.

Re: OpenBSD 5.2 AutoFSCK at boot

Hello All, Thanks for the answers, I have gotten multiple good solutions here. Yes Indeed I have not provided some key details, well the OpenBSD 5.2 boxes were running in Vmware Server 2.X free until they were migrated to Vmware Workstation 8,9 and finally to Workstation 12 boxes. HDD was

Re: trouble shooting print errors

Hi, On Wed, 30 Nov 2016 07:56:16 -0600 f...@speednet.com wrote: > I am getting "Broken Pipe" and or "Scheduler not responding" > when attempting to print from a laser desk printer directly > attached to usb. > OpenBSD 6.0 recognizes the printer in dmesg and when plugged

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Hi, On Wed, 30 Nov 2016 17:09:13 +0100 butresin wrote: > On 16.11.29Tue 14:12, Craig Skinner wrote: > > > > real mem = 200740864 (191MB) > > avail mem = 184385536 (175MB) > ... > > spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3 > > spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity