Hi,
Am wondering if anyone here did anything with regards to using VLC to
stream/playback VoD streams. (using VLC's RTSP streaming)
Mplayer seems to jerk after the initial buffering when I play back RTSP
streams.
--
Ow Mun Heng
Gentoo/Linux on DELL D600 1.4Ghz 1.5GB RAM
98%
Marius Schrecker wrote:
A couple of days ago I posted about vertical stripes over anything
captured from my pvr-500. Unfortunately, my ISP chose that moment to
pull the plug on their mail servers and go out of business, so
nothing
has been getting through between now and then.
Can some
Hello, i've 3 skystar cards in my pc and the scan worked, but i don't know
wich version i used because it's 3 or 4 month away.
When you search for the channels, you have to give a starting frequency and
and symbol rate:
Example: ARD 27500 28106, but you have to enter in myth: 2750 28106000)
On Thu, Jul 21, 2005 at 01:37:25AM +0200, Axel Thimm wrote:
On Wed, Jul 20, 2005 at 10:34:03AM -0800, jonr wrote:
Axel Thimm wrote:
The packages in stable have transcode support again (untested).
Any chance of an i386 rpm of this also? Maybe I am dense but I can't
seem to install or
Jesse Guardiani writes:
On Sunday 18 September 2005 5:09 pm, [EMAIL PROTECTED] wrote:
Hi,
I want to make mythfrontend/diskless on old hardware
Whats the minimum cpu speed, ram for mythfrontend ?
Celeron 400, 700 Mhz , 64, 128 RAM , geforce mx4 ?
Any suggestion?
I've got fairly old hardware.
PAUL WILLIAMSON writes:
It depends. If you want to play HD, you'll need
lots. If you want to *only* play back recorded
material without transcoding, you could use a
mediamvp (can be had for less than $100).
I dont leaving in US , this mediamvp is not cheap in my country
Possibly try compiling under GCC 3.3?
Run 'sudo gcc_select 3.3' to swap over and try compiling again (I compiled
LAME ages ago now using 3.3)
Did you try thesniderpad's frontend? It has plugins. There's an 0.18.1 build
here:
Hi,
I want to make mythfrontend/diskless on old hardware
Whats the minimum cpu speed, ram for mythfrontend ?
Celeron 400, 700 Mhz , 64, 128 RAM , geforce mx4 ?
Any suggestion?
___
My first mythbox prototype was a BP6 (dual celeron 300's
Success!!
At last I've found the problem.
But I'm not going to tell anyone :-))
Its empty - mythbackend runs fine on its own, its the running of it from
the init scripts thats broken :-(( Its as if its not finding a library on
the search path so bombs but is OK when I telnet in just run
On 18/09/05, Scot L. Harris [EMAIL PROTECTED] wrote:
First I need to thank Jarod yet again. The section of his guide on
upgrading worked just fine on my master backend/frontend system. It was
as simple as running:
yum install mythtv-suite
and the system was upgraded from .17 to .18.1
fyi, this problem is now fixed.. Update nuvexport.
Chris - do you know when you will place a RPM of this in the nuvexport
archive page at http://forevermore.net/files/nuvexport/? I think the
RPM version that's there doesn't have the yuvdenoise fix yet.
Regards,
Phill
On Wed, Sep 14, 2005 at 09:09:30PM +1000, Eyal Lebedinsky wrote:
New packages just arrived off dijkstra.csh.rit.edu (look like 0.18.1-5)
and they were kept back. Trying to install says:
[..]
I am on stable. Did these packages move to the new unstable?
Yes, looks like it - though mythplugins
Greetings
I recall seeing a few weeks ago a method of selecting a channel and
automagically selecting the correct input for it - tuner or s-video. I
understand that its a new feature, so far only in SVN.
Question is, how do I use it without a 'C' key to toggle between inputs?
Do I set up two
There are several efforts to archive Myth recordings to DVD/SVCD,
etc, but what about simply archiving a set of nuv files without the
hassle of transcoding or building menu structure, etc? This would be
ideal for those of us who would like to just archive a few shows/
series which would
On 19/09/05, Robin Gilks [EMAIL PROTECTED] wrote:
Greetings
I recall seeing a few weeks ago a method of selecting a channel and
automagically selecting the correct input for it - tuner or s-video. I
understand that its a new feature, so far only in SVN.
Question is, how do I use it
On 18/09/05, Allan Wilson [EMAIL PROTECTED] wrote:
There have been quite a few posts on how to get the PVR-500mce working but I
thought I would summarize everything that I found out while getting my new
500mce working. If anyone has anything to add please feel free to update.
The
Hi All
I'm in the UK and mythfilldatabase works fine when I run it manually,
however if it's run from cron I get this error:
2005-09-19 13:31:02.190 New DB connection, total: 1
2005-09-19 13:31:02.201 New DB connection, total: 2
2005-09-19 13:31:02.202 mythfilldatabase: Listings Download
- to start mythfrontend but immediately in certain plugin.
Just pass the name of the plugin to the mythfrontend commandline.
For Example:
mythfrontend mythweather
Should start mythfrontend and launch mythweather. However exiting
will close both mythweather and mythfrontend.
On Mon, 2005-09-19 at 07:24, Nick wrote:
Thank you for the reply.
*IMPORTANT* - the slave backend (SBE) needs to be configured so that
it can connect to the master backend (MBE) and database.
I believe I have that working now. From the log file on the slave
backend I get this:
On Mon, 2005-09-19 at 08:32, Nick wrote:
On 18/09/05, Allan Wilson [EMAIL PROTECTED] wrote:
There have been quite a few posts on how to get the PVR-500mce working but I
thought I would summarize everything that I found out while getting my new
500mce working. If anyone has anything to add
On 19/09/05, James Pattinson [EMAIL PROTECTED] wrote:
Hi All
I'm in the UK and mythfilldatabase works fine when I run it manually,
however if it's run from cron I get this error:
2005-09-19 13:31:02.190 New DB connection, total: 1
2005-09-19 13:31:02.201 New DB connection, total: 2
I had this same problem, using -quiet solves it.
PaulOn 9/19/05, Nick [EMAIL PROTECTED] wrote:
On 19/09/05, James Pattinson [EMAIL PROTECTED] wrote: Hi All I'm in the UK and mythfilldatabase works fine when I run it manually, however if it's run from cron I get this error:
2005-09-19
its @ mythextra.napsi.net
- Original Message -
From: Robin Gilks [EMAIL PROTECTED]
To: mythtv-users@mythtv.org
Sent: Thursday, September 15, 2005 9:58 AM
Subject: [mythtv-users] MythFM
Greetings
Has anyone got a copy of mythfm-0.18.tar.bz2 they can put up on a web site
for me
On 19/09/05, Scot L. Harris [EMAIL PROTECTED] wrote:
On Mon, 2005-09-19 at 07:24, Nick wrote:
Thank you for the reply.
*IMPORTANT* - the slave backend (SBE) needs to be configured so that
it can connect to the master backend (MBE) and database.
I believe I have that working now.
Hi,
I'm new to MythTV and I couldn't search the mailing list archives for an
answer, so if I'm asking a question that's alreay answered, I'm sorry. :)
This is the setup I want to realize:
video input device: DboxII digital cable box.
server: Linux box with MythTV.
client: xbox with xbox media
Since I didn't recognize all the abbreviated channel IDs, I just set
myself up initially for all channels that I receive when I signed up
with zap2it. I've now gone through and identified about two dozen
channels that don't interest me and have removed them from my zap2it
lineup.
Section 22.9 of
If you are talking about no audio on the second card then I can say that I have audio on both tuners on my system.
AllanOn 9/19/05, Scot L. Harris [EMAIL PROTECTED] wrote:
On Mon, 2005-09-19 at 08:32, Nick wrote: On 18/09/05, Allan Wilson [EMAIL PROTECTED] wrote: There have been quite a few
Nice one, that seems to work so far - but
http://xmltv.radiotimes.com/xmltv/channels.dat is 404'ing for me now!
I'm sure it was working a few days ago when I last grabbed. Anyone
confirm it's working for them at the moment?
Thanks
james
Paul Wheeler wrote:
I had this same problem, using
On 19/09/05, James Pattinson [EMAIL PROTECTED] wrote:
Nice one, that seems to work so far - but
http://xmltv.radiotimes.com/xmltv/channels.dat is 404'ing for me now!
I'm sure it was working a few days ago when I last grabbed. Anyone
confirm it's working for them at the moment?
Down for me
Hi all,
I'm based in Sydney Australia and with two of our channels, SBS and
Channel 7 Mythtv appears to be choosing the wrong audio stream.
If I tune to these channels whilst on another channel, I get no audio
-- I have to press (+) or (-) to force myth to use another audio
stream, which then
On Mon, Sep 19, 2005 at 03:33:46PM +0100, James Pattinson wrote:
Nice one, that seems to work so far - but
http://xmltv.radiotimes.com/xmltv/channels.dat is 404'ing for me now!
I'm sure it was working a few days ago when I last grabbed. Anyone
confirm it's working for them at the moment?
On 19/09/05, Richard Jones [EMAIL PROTECTED] wrote:
On Sun, 18 Sep 2005 05:04 pm, Jon Whitear wrote:
[EMAIL PROTECTED] wrote:
When I try to run mythtv and use Live TV, I get the following in the
mythbackend:
snip
2005-09-18 16:07:37.150 DVB#0 ERROR - Could not find dvb tuning
Hi,
I am having problem with AV sync on single channel (BBC Prime on Hotbird).
Audio is constantly off by some 1/2 seconds, in both
liveTv and recorded programmes. no errors in backend or frontend log. There is
only single audio channel, so pressing + does
nothing.
I have Nexus-S FF card, in
Hi all,
Is it possible to capture multiple channels at the same time with using just a single DVB card ?
Thanks
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Chris - do you know when you will place a RPM of this in the nuvexport
archive page at http://forevermore.net/files/nuvexport/? I think the
RPM version that's there doesn't have the yuvdenoise fix yet.
It's all the same code. I have a script I run that builds the tarball,
compiles the rpm and
On 19/09/05, turha turha [EMAIL PROTECTED] wrote:
Hi all,
Is it possible to capture multiple channels at the same time with using
just a single DVB card ?
Work on capturing multiple channels from the same multiplex is
underway (it isn't possible to capture from non-similar 'plexes
because
Is DVB-T what digital cable is, ie would a DVB-T capable card be able
to see all my mediacom digital cable channels (ames, ia, 50014) or is
their signal different?
___
mythtv-users mailing list
mythtv-users@mythtv.org
On 19/09/05, Derek Meek [EMAIL PROTECTED] wrote:
Is DVB-T what digital cable is, ie would a DVB-T capable card be able to
see all my mediacom digital cable channels (ames, ia, 50014) or is their
signal different?
DVB-T is digital terrestrial (over the air). DVB-C is designed for
digital cable,
I just finished a fresh fc4 install utilizing Jarod's guide. I have a
master backend/frontend that can record, watch live tv and play
recordings with no problem. My remote frontend locks up on a black
screen when attempting to watch live tv or recordings. If I go to the
recordings menu, I can
nuvexport does not seem to remove TV commercials. I
received this message:
Choose a function, or episode(s) to remove: c
Where would you like to export the files to? [.]
/dvd/ThisOldHouse/
Enable Myth cutlist? [Yes]
yuvdenoise version 1.6.3rc1 is broken and cannot be
used.
Press enter to
nuvexport does not seem to remove TV commercials. I
received this message:
Choose a function, or episode(s) to remove: c
Where would you like to export the files to? [.]
/dvd/ThisOldHouse/
Enable Myth cutlist? [Yes]
yuvdenoise version 1.6.3rc1 is broken and cannot be
used.
Press enter to
On 19/09/05, David W Davis [EMAIL PROTECTED] wrote:
I just finished a fresh fc4 install utilizing Jarod's guide. I have a
master backend/frontend that can record, watch live tv and play
recordings with no problem. My remote frontend locks up on a black
screen when attempting to watch live tv
Nick wrote:
On 19/09/05, David W Davis [EMAIL PROTECTED] wrote:
I just finished a fresh fc4 install utilizing Jarod's guide. I have a
master backend/frontend that can record, watch live tv and play
recordings with no problem. My remote frontend locks up on a black
screen when attempting to
Nick wrote:
On 19/09/05, Derek Meek [EMAIL PROTECTED] wrote:
Is DVB-T what digital cable is, ie would a DVB-T capable card be able to
see all my mediacom digital cable channels (ames, ia, 50014) or is their
signal different?
DVB-T is digital terrestrial (over the air). DVB-C is
On Mon, 2005-09-19 at 09:40, Nick wrote:
On 19/09/05, Scot L. Harris [EMAIL PROTECTED] wrote:
If this was done on the SBE should this be deleted? On the first couple
of passes at this I skipped the step of creating video sources but when
I tried to setup the input connections the only
Dave Sherohman wrote:
Since I didn't recognize all the abbreviated channel IDs, I just set
myself up initially for all channels that I receive when I signed up
with zap2it. I've now gone through and identified about two dozen
channels that don't interest me and have removed them from my zap2it
On Mon, Sep 19, 2005 at 10:27:13AM -0700, Bruce Markey wrote:
Dave Sherohman wrote:
Section 22.9 of the howto states that I now should go into the
database directly and run a couple SQL statements to get rid of the
channel I deleted... but that seems a bit labor-intensive when you're
doing
Hello all,
Been breaking Linux for awhile now. Followed Jarod's FC guide to the
letter. Worked fine a few days ago. I loaded the LIRC for my ATI All in
Wonder and it 'works'. However, now the database won't start at all.
Here's some info I could think to provide:
[quote]
[EMAIL
Does anyone knows of a ir-receiver compatible with the remote that came with
the pvr-350, no-configuration needed (and if possible cheaper)?
I don't know if something is broken in the pvr-350, the ivtv are not correct
or lirc is not working with the correct drivers, the fact is that everything
Hello,
My Gentoo transcode segfaults when I run MythBurn.
The extractthumbnail.sh script is what transcode is called
from, and it segmentation faults and gives a broken pipe error.
I've tried transcode 0.6.14-r2 transcode 1.0.0. Both
seem to do the same thing.
Here are my USE flags:
On Mon, 2005-09-19 at 14:27, Oscar Curero wrote:
Does anyone knows of a ir-receiver compatible with the remote that came with
the pvr-350, no-configuration needed (and if possible cheaper)?
I don't know if something is broken in the pvr-350, the ivtv are not correct
or lirc is not working
On Fri, 16 Sep 2005, Andrew Gallatin wrote:
I was waiting too, but finally gave up after Aug 30 was pushed to Sept
15th. Maybe I gave up too soon, but the FusionHDTV5 Gold that I got
instead seems to have worked out OK.
FedEx claims they will deliver my three cards on Wednesday :)...
If I
Dave Sherohman wrote:
On Mon, Sep 19, 2005 at 10:27:13AM -0700, Bruce Markey wrote:
Dave Sherohman wrote:
Section 22.9 of the howto states that I now should go into the
database directly and run a couple SQL statements to get rid of the
channel I deleted... but that seems a bit
I have been playing around with FTA boxes for some time. I have not built
a Myth box yet since I had a DTivo. I looked around and what info I found
for DVB was outdated.
Is there a good howto on setting this up?
___
mythtv-users mailing list
Jeremy Thompson wrote:
Hello all,
Been breaking Linux for awhile now. Followed Jarod's FC guide to the
letter. Worked fine a few days ago. I loaded the LIRC for my ATI All
in Wonder and it 'works'. However, now the database won't start at all.
Here's some info I could think to
Have anyone successfully running mythfrontend on xbox??
I recently installed linux on my xbox. The distribution was
xebian. Of course the next thing I want to do is install
mythfrontend. Simply doing an apt-get on the mythfrontend
packages results in a nighmarish dependency hell issue. Any easy
On 19/09/05, Monkey Pet [EMAIL PROTECTED] wrote:
Have anyone successfully running mythfrontend on xbox??
Yes. Several of us.
I recently installed linux on my xbox. The distribution was xebian. Of
course the next thing I want to do is install mythfrontend. Simply doing an
apt-get on the
Hey everyone! Just wanted to let you know that I finally got the next generation Air2PC that has been on backorder since MARCH! It came today and it's actually been renamed to the AirStar-HD5000-PCI by TechniSat Digital. I got it from
cyberestore.com. I haven't installed it yet, as I just have a
Does anyone know if the Firefly usb remote from SnapStream will work
with Linux and/or MythTV?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I'm trying to make my MythTV box (both frontend and backend) suspend to
RAM when it's idle. Everything I read says I just need to set the
wake-up alarm by echoing a time and date to /proc/acpi/alarm and then
suspend the machine by doing:
echo -n mem /sys/power/state
However, whenever
On Mon, 2005-09-19 at 15:28, Steve Hill wrote:
I'm trying to make my MythTV box (both frontend and backend) suspend to
RAM when it's idle. Everything I read says I just need to set the
wake-up alarm by echoing a time and date to /proc/acpi/alarm and then
suspend the machine by doing:
I've heard that it's just an x10 remote and you can use the linux
x10 drivers for it, but other than that, I don't know any
specifics... (but maybe that's enough of a keyword to google for?)
E.
--
http://www.byopvr.com
On 9/19/05, Bill Omer [EMAIL PROTECTED] wrote:
Does anyone know if the
On Mon, 2005-09-19 at 20:28 +0100, Steve Hill wrote:
Everything I read says I just need to set the
wake-up alarm by echoing a time and date to /proc/acpi/alarm and then
suspend the machine by doing:
echo -n mem /sys/power/state
Where did you read this? I'd like to know because
I actually use the suspend to ACPI ram all the time on my laptop (dell
inspiron 8500). I did have some pretty heavy problems trying to get it
running on my mythfrontend though. There the problem was mainly in getting
the motherboard to respect a USB wake-up event (crappy cheap MB).
In any
On Monday 19 September 2005 21:36, Greg Woods wrote:
On Mon, 2005-09-19 at 20:28 +0100, Steve Hill wrote:
Everything I read says I just need to set the
wake-up alarm by echoing a time and date to /proc/acpi/alarm and then
suspend the machine by doing:
echo -n mem /sys/power/state
Have anyone successfully running mythfrontend on xbox??
Yes. I installed via the scripts at http://bit.blkbk.com/ and it's been
running fine for quite a while - that was months and months ago now
though.
I'm running Myth 0.18.1 with a Gentoo based backend fwiw
Greg
On Mon, 19 Sep 2005 13:26:00 -0400
Scot L. Harris [EMAIL PROTECTED] wrote:
Maybe what is confusing me is how to get the capture cards on the
SBE configured on the MBE.
You don't. The MBE automagically finds available cards on slave
backend(s), if/when the SBE mythbackend is running.
Like the
See solution that worked for me:
http://www.gossamer-threads.com/lists/mythtv/users/148141
(last post in thread)
br,
k.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[already posted this to the LIRC mailing list, but got no replies]
I'm having problems getting lirc to run under FC4. I've installed the
modules from atrpms.net using Synaptic/apt and followed the guide on
http://wilsonet.com/mythtv/fcmyth.php.
There were no error messages when installing the
I suppose it is obvious in hindsight that the frontends need to see the
files stored by the backend and it would be quiet silly for myth to
reinvent the wheel to do this.
mount -t nfs mythbackend:/mnt/store /mnt/store
on the frontend did wonders :) (Of course the actual command will
depend on
On 9/19/05, Matt [EMAIL PROTECTED] wrote:
Hey everyone! Just wanted to let you know that I finally got
the next generation Air2PC that has been on backorder since
MARCH! It came today and it's actually been renamed to the
AirStar-HD5000-PCI by TechniSat Digital. I got it from cyberestore.com.
I
On Mon, 2005-09-19 at 16:29, Jay Jarvinen wrote:
On Mon, 19 Sep 2005 13:26:00 -0400
Scot L. Harris [EMAIL PROTECTED] wrote:
Maybe what is confusing me is how to get the capture cards on the
SBE configured on the MBE.
You don't. The MBE automagically finds available cards on slave
I've been researching MythTV for some time now. I've just come in to a
fair amount of money, so I think it's time to finally get off my duff and
build the MythTV box.
I have already decided that I'm going to use the Hauppauge PVR-350 for the
video encoding / decoding (nothing fancy,
So do you or anybody else know how long, roughly speaking, it will take before we can get our hands on it ?
And as I've understood it, a single multiplex can hold 4-5 channels, is that right ?
Thanks.On 9/19/05, Nick [EMAIL PROTECTED] wrote:
On 19/09/05, turha turha [EMAIL PROTECTED] wrote:
El Dilluns, 19 de Setembre de 2005 20:42, Scot L. Harris va escriure:
On Mon, 2005-09-19 at 14:27, Oscar Curero wrote:
Does anyone knows of a ir-receiver compatible with the remote that came
with the pvr-350, no-configuration needed (and if possible cheaper)?
I don't know if something is
Hello everyone, I have a general question for you. I have a DVR at home
currently running Windows XP Media Center 2005 with a Hauppauge PVR-150MCE
(dual tuner) TV capture card. It works alright, but I am thinking of moving
to the Linux/MythTV world, but I can't seem to find out if my capture
Yes,
The PVR-350 can do output via X and handle the decoding of video all
through the same port. Can be a bit tricky to setup but Jarod
Wilson has his excellent guide that walks through really nicely
(http://www.wilsonet.com/fcmyth.php)
___
mythtv-users
The PVR-350 has a great tvout ( comes with scart lead) X also works ok
on it(the tvout) it is fine for the menu and gui. I havent tried DVD
playing and didnt use it as a main computer. I have a PAL (UK) card for
sale if you want it, went digital and dont need an analog card anymore.
PaulOn
This week many of the new fall programs are starting. Current
SVN has features to help you find these new shows so that you
could record the first episode to see if you like it or set
a recurring rule for things you expect you will want to watch.
The first place to look in any recent version of
Hi Jochen,
thank you very much for your response.
On 9/19/05, Jochen Kühner [EMAIL PROTECTED] wrote:
Hello, i've 3 skystar cards in my pc and the scan worked, but i don't know
wich version i used because it's 3 or 4 month away.
When you search for the channels, you have to give a starting
I have a P4 1.9 w/ 256 Memory and it plays DVD back fine with some tweaking in xine.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Sorry mine should have read --quiet not -quiet.On 9/19/05, Dave Sherohman [EMAIL PROTECTED] wrote:
On Mon, Sep 19, 2005 at 03:33:46PM +0100, James Pattinson wrote: Nice one, that seems to work so far - but
http://xmltv.radiotimes.com/xmltv/channels.dat is 404'ing for me now! I'm sure it was
On Mon, 19 Sep 2005 17:24:34 -0400
Scot L. Harris [EMAIL PROTECTED] wrote:
Just to summarize:
1. load mythtv-suite on SBE
2. configure ivtv
3. verified that video can be captured on SBE capture cards
4. run mythtvsetup on SBE
5. in mythtvsetup on SBE execute steps 1, 2 (note if I try
On 19/09/05, Scot L. Harris [EMAIL PROTECTED] wrote:
On Mon, 2005-09-19 at 16:29, Jay Jarvinen wrote:
On Mon, 19 Sep 2005 13:26:00 -0400
Scot L. Harris [EMAIL PROTECTED] wrote:
Maybe what is confusing me is how to get the capture cards on the
SBE configured on the MBE.
You don't.
I am currently using the Hauppauge PVR-150MCE ( not a dual TV tuner, only
one TV tuner and one FM tuner) with my MythTV setup. It works great. I am
using the ivtv driver ver. 0.3.3. Also, if you have an MCE 2005 remote it it
should work as well. I have one and I am using the Martin Blatter
Scot L. Harris wrote:
...
Well the magic seems to be missing from my configuration. :)
There is no magic. That post was very misleading. Cards must be
configured locally. You must add the slave card by running
mythtv-setup on the slave host.
...
5. in mythtvsetup on SBE execute steps 1, 2
On Mon, 19 Sep 2005 14:51:38 -0700
Curt McNamee [EMAIL PROTECTED] wrote:
My current system is a system with the following specs: P4 1.5Ghz,
512MB, 8x AGP Nvidia GeForce4 MX 64MB, 120GB hard drive, and
Hauppauge PVR-150MCE capture card. I am assuming if this is
powerful enough to work under
- Original Message -
From: Jesse Guardiani [EMAIL PROTECTED]
To: Discussion about mythtv mythtv-users@mythtv.org
Sent: Monday, September 19, 2005 7:41 PM
Subject: [mythtv-users] Mythburn: Gentoo transcode - use flags? versions?mine
segfaults...
Hello,
My Gentoo transcode segfaults
On 19/09/05, Oscar Curero [EMAIL PROTECTED] wrote:
El Dilluns, 19 de Setembre de 2005 20:42, Scot L. Harris va escriure:
On Mon, 2005-09-19 at 14:27, Oscar Curero wrote:
Does anyone knows of a ir-receiver compatible with the remote that came
with the pvr-350, no-configuration needed
On 19/09/05, Tony McDowell [EMAIL PROTECTED] wrote:
I've been researching MythTV for some time now. I've just come in to a
fair amount of money, so I think it's time to finally get off my duff and
build the MythTV box.
I have already decided that I'm going to use the Hauppauge PVR-350 for
On Mon, 2005-09-19 at 17:50, Oscar Curero wrote:
El Dilluns, 19 de Setembre de 2005 20:42, Scot L. Harris va escriure:
On Mon, 2005-09-19 at 14:27, Oscar Curero wrote:
Does anyone knows of a ir-receiver compatible with the remote that came
with the pvr-350, no-configuration needed (and
On Mon, 2005-09-19 at 17:51, Nathan Hesson wrote:
Yes,
The PVR-350 can do output via X and handle the decoding of video all
through the same port. Can be a bit tricky to setup but Jarod Wilson
has his excellent guide that walks through really nicely
(http://www.wilsonet.com/fcmyth.php)
I
duckeo wrote:
I'm based in Sydney Australia and with two of our channels, SBS and
Channel 7 Mythtv appears to be choosing the wrong audio stream.
If I tune to these channels whilst on another channel, I get no audio
-- I have to press (+) or (-) to force myth to use another audio
stream,
On 9/19/05, Michael J. Lynch [EMAIL PROTECTED] wrote:
Nick wrote:
On 19/09/05, David W Davis [EMAIL PROTECTED] wrote:
I just finished a fresh fc4 install utilizing Jarod's guide. I have a
master backend/frontend that can record, watch live tv and play
recordings with no problem. My
On Mon, 2005-09-19 at 18:11, Jay Jarvinen wrote:
On Mon, 19 Sep 2005 17:24:34 -0400
Scot L. Harris [EMAIL PROTECTED] wrote:
Just to summarize:
1. load mythtv-suite on SBE
2. configure ivtv
3. verified that video can be captured on SBE capture cards
4. run mythtvsetup on SBE
5.
On Mon, 2005-09-19 at 18:13, Nick wrote:
On 19/09/05, Scot L. Harris [EMAIL PROTECTED] wrote:
On Mon, 2005-09-19 at 16:29, Jay Jarvinen wrote:
On Mon, 19 Sep 2005 13:26:00 -0400
Scot L. Harris [EMAIL PROTECTED] wrote:
Maybe what is confusing me is how to get the capture cards on
On Mon, 2005-09-19 at 18:12, Bruce Markey wrote:
Scot L. Harris wrote:
...
Well the magic seems to be missing from my configuration. :)
There is no magic. That post was very misleading. Cards must be
configured locally. You must add the slave card by running
mythtv-setup on the slave
I ripped a couple of DVDs but I find that when I try to play them
through one of my MediaMVPs that it is a bit jerky. That is my
fundamental problem so if anybody has any suggestions about that in
general, let me know.
My current approach involves trying to transcode them down to a lower
bitrate
On 19/09/05, Monkey Pet [EMAIL PROTECTED] wrote:
I recently installed linux on my xbox. The distribution was xebian. Of
course the next thing I want to do is install mythfrontend. Simply doing an
apt-get on the mythfrontend packages results in a nighmarish dependency hell
issue. Any easy
I just lost a ton of recorded programs on a disk. Now I have a lot of
things in the Recordings menu, and they won't delete. Anyway to mass
remove everything, or am I better off just dumping the database
completely and re-starting from scratch?
___
1 - 100 of 141 matches
Mail list logo
