On 7-10-2010 12:02, Stefan Müller wrote:
Thank you very much for your effort. Pretty amazing what's doable.
Unfortunately there are two issues: The distance between numbers and
source lines is too small for bigger line numbers. I just have to make
distance=0em big enough for this to work, right
On Thursday 07 October 2010 09:19:42 Hans Hagen wrote:
On 7-10-2010 12:02, Stefan Müller wrote:
Splitting up long source code in several pieces (one per page) and put
them in separate figures doesn't seem right to me. Setting it as
numbered paragraph? Putting up a fake caption with
On 07.10.2010 09:35, Alan BRASLAU wrote:
On Thursday 07 October 2010 09:19:42 Hans Hagen wrote:
On 7-10-2010 12:02, Stefan Müller wrote:
Splitting up long source code in several pieces (one per page) and put
them in separate figures doesn't seem right to me. Setting it as
numbered paragraph?
Hi list,
I defined a float for typesetting algorithms, so I can reference them at
other places in the document.
\definefloat[algorithm][algorithms]
When I now place such a figure with
\placealgorithm[here][alg:myalgorithm]{Very neat algorithm.}{
\starttyping
some source code
On 6-10-2010 4:26, Stefan Müller wrote:
Hi list,
I defined a float for typesetting algorithms, so I can reference them at
other places in the document.
\definefloat[algorithm][algorithms]
When I now place such a figure with
\placealgorithm[here][alg:myalgorithm]{Very neat algorithm.}{
On 6-10-2010 4:26, Stefan Müller wrote:
Hi list,
I defined a float for typesetting algorithms, so I can reference them at
other places in the document.
\definefloat[algorithm][algorithms]
When I now place such a figure with
\placealgorithm[here][alg:myalgorithm]{Very neat algorithm.}{
Hi all,
how do I get my numbers in level nine (and higher) back?
See example below please.
Did someone change module[subsub] ??
Thanks in advance,
Steffen
[2010.09.05 13:23 MKIV]
=
\usemodule[subsub]
\starttext
\definehead [LevelSeven] [subsubsubsubsection]
\definehead [LevelNine
Hi,
I'm trying to create a book where the front matter has no
headers/footers, except roman numeral page numbers at the top outside of the
page. The main matter should have Arabic numeral page numbers
(restarting with '1') at the top outside of each page, plus the name of
the book in the header
On Tue, Aug 24, 2010 at 6:01 PM, Michael Goerz
go...@physik.fu-berlin.de wrote:
I'm trying to create a book where the front matter has no
headers/footers, except roman numeral page numbers at the top outside of the
page. The main matter should have Arabic numeral page numbers
(restarting
I seem to be full of problems today:
---
\setupcolors[state=start]
\setupinteraction[state=start, color=black]
\setupcolor[hex]
\definecolor[titleRed][h=910A00]
\starttext
This \footnote{should not have a red color, correct?}
\stoptext
---
The footnote
On 2010-08-13 17:54:02, John Haltiwanger wrote:
I seem to be full of problems today:
---
\setupcolors[state=start]
\setupinteraction[state=start, color=black]
Hi John,
it's a link to the same page:
\setupinteraction[state=start, color=black, contrastcolor=black]
should
On 13-8-2010 7:54, John Haltiwanger wrote:
I seem to be full of problems today:
---
\setupcolors[state=start]
\setupinteraction[state=start, color=black]
\setupcolor[hex]
\definecolor[titleRed][h=910A00]
\starttext
This \footnote{should not have a red color, correct?}
于 2010年08月13日 00:21, Wolfgang Schuster 写道:
Should be \setupuserpagenumber.
Thanks, this works.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl
Hi all,
this is an example.
\setuptyping[numbering=line]
\setuplinenumbering[location=intext]
\showframe
\starttext
\starttyping
This is the first line.
Last line after an empty line.
\stoptyping
\stoptext
the linenumbering setup of location=intext can not work. the line
numbers still
=intext can not work. the line
numbers still be inmargin.
Not location=intext, but location=text will do.
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context
.
\stoptyping
\stoptext
the linenumbering setup of location=intext can not work. the line
numbers still be inmargin.
Not location=intext, but location=text will do.
I see, tks!
--
Best regards,
Li Yanrui (李延瑞
Hi,
The following minimal example has no effect on page numbering(MkIV):
\setuppagenumbering[conversion=romannumerals] %
\setuppagenumbering[numberconversion=romannumerals] has no effect too.
\starttext
\chapter{Alpha}
\input tufte
\stoptext
$ context --version
MTXrun | current version:
Am 12.08.10 03:52, schrieb Hongwen Qiu:
Hi,
The following minimal example has no effect on page numbering(MkIV):
\setuppagenumbering[conversion=romannumerals] %
\setuppagenumbering[numberconversion=romannumerals] has no effect too.
\setupuserpagenumbering[numberconversion=romannumerals]
于 2010年08月12日 11:08, Wolfgang Schuster 写道:
Am 12.08.10 03:52, schrieb Hongwen Qiu:
Hi,
The following minimal example has no effect on page numbering(MkIV):
\setuppagenumbering[conversion=romannumerals] %
\setuppagenumbering[numberconversion=romannumerals] has no effect too.
included below, it was the first three entries on each page (after the first
page) that were formatted as if they were on the previous page.
Related to this, I need invisible page numbers on the table of contents
pages to enable different formatting by odd/even page number (which I
accomplish now
Am 20.05.10 13:21, schrieb Piotr Kopszak:
Many thanks for your help!
First the file according to the wiki example. Works if location=footer
in \setuppagenumbering but not when
\definepagebreak
[mychapterpagebreak]
[yes,header,right]
\setuphead
[chapter]
That's very close indeed. Thanks for putting me on the right track!
What I wanted is rather:
\setuphead
[chapter]
[page={yes,footer,right},
footer=nomarking]
Best
Piotr
2010/5/21 Wolfgang Schuster schuster.wolfg...@googlemail.com:
Am 20.05.10 13:21, schrieb Piotr Kopszak:
Many thanks
Hello list,
I don't know if it is only an idiosyncrasy of Polish typography but if
a chapter ends with a blank page it should not display its number. It
would be very useful if this could be an option (if not a default
behaviour) of \setuppagenumbering . It's not a huge problem and I
think I will
Piotr Kopszak wrote:
Hello list,
I don't know if it is only an idiosyncrasy of Polish typography but if
a chapter ends with a blank page it should not display its number. It
would be very useful if this could be an option (if not a default
behaviour) of \setuppagenumbering . It's not a huge
Am 20.05.10 11:07, schrieb Piotr Kopszak:
Hello list,
I don't know if it is only an idiosyncrasy of Polish typography but if
a chapter ends with a blank page it should not display its number. It
would be very useful if this could be an option (if not a default
behaviour) of \setuppagenumbering
It would be handy to avoid inserting \page in this case, I think.
2010/5/20 Taco Hoekwater t...@elvenkind.com:
Piotr Kopszak wrote:
Hello list,
I don't know if it is only an idiosyncrasy of Polish typography but if
a chapter ends with a blank page it should not display its number. It
Yes, I know but even if it was working in all cases (and it is not,
for instace I need pagenumbers in the margin and it didn't work in
this case) it looks really, really ugly. Why not wrap something like
this in a definition and give users an option?
2010/5/20 Wolfgang Schuster
Am 20.05.10 12:58, schrieb Piotr Kopszak:
Yes, I know but even if it was working in all cases (and it is not,
for instace I need pagenumbers in the margin and it didn't work in
this case) it looks really, really ugly. Why not wrap something like
this in a definition and give users an option?
Am 20.05.10 12:53, schrieb Piotr Kopszak:
It would be handy to avoid inserting \page in this case, I think.
\setuphead[chapter][page={blank,right}]
Wolfgang
___
If your question is of interest to others as
Many thanks for your help!
First the file according to the wiki example. Works if location=footer
in \setuppagenumbering but not when
\definepagebreak
[mychapterpagebreak]
[yes,header,right]
\setuphead
[chapter]
[page=mychapterpagebreak,footer=empty]
Dear all,
When defining abbreviations through \definesynonyms, if the abbreviation
contains a digit then it seems that the built-in macro is not recognized: in
the example below the command \EEG is recognized, whereas \M2 or \Y2K are not.
Is there a way around this difficulty? Or should one
On 13-5-2010 10:42, Otared Kavian wrote:
Dear all,
When defining abbreviations through \definesynonyms, if the abbreviation
contains a digit then it seems that the built-in macro is not recognized: in
the example below the command \EEG is recognized, whereas \M2 or \Y2K are not.
Is there a
Hello,
I'm preparing a simple template for exam tests. I have following commad.
\question{3}{text text text}
where firtst parametr stands for points.
I'd like to compute the sum of points to be used as Total points: xx
What is the correct approach to do that if I'm using MKII?
greetings Jan
Jan Pohanka wrote:
Hello,
I'm preparing a simple template for exam tests. I have following commad.
\question{3}{text text text}
\newcount\totalpoints
\def\question#1#2{\global\advance\totalpoints #1\relax ... #2 ...}
where firtst parametr stands for points.
I'd like to compute the sum of
Thank you,
I have an additional question. Is it possible to have the sum available
before the \question commands?
I mean
Total points: \the\totalpoints % or something like that
\question{5}{text text}
\question{3}{text text}
\question{1}{text text}
greetings,
Jan
Dne Tue, 11 May 2010
Jan Pohanka wrote:
Thank you,
I have an additional question. Is it possible to have the sum available
before the \question commands?
This is what I would do (but I suspect Wolfgang can come up
with something cleaner):
\def\startquestions
{\newcount\totalpoints}
\def\stopquestions
Hello,
in mkII I use to set my left margins to 0pt. When I do this now in mkIV, I get
misplaced footnote numbers (at the bottom).
Example:
\setuplayout
[leftmargin=\zeropoint]
\starttext
just text\footnote{foot text}
\stoptext
To get correctly placed numbers I have to either set
Am 03.05.10 14:11, schrieb Thomas Floeren:
Hello,
in mkII I use to set my left margins to 0pt. When I do this now in mkIV, I get
misplaced footnote numbers (at the bottom).
Example:
\setuplayout
[leftmargin=\zeropoint]
\starttext
just text\footnote{foot text}
\stoptext
To get
Wolfgang Schuster mailto:schuster.wolfg...@googlemail.com wrote on Monday,
May 03, 2010 2:20 PM:
Am 03.05.10 14:11, schrieb Thomas Floeren:
Hello,
in mkII I use to set my left margins to 0pt. When I do this now in
mkIV, I get misplaced footnote numbers (at the bottom).
Example
Am 03.05.10 15:23, schrieb Thomas Floeren:
Without the leftmargin key, text and footer leave the page borders.
Guess I have to to change my way to setup the layout in mkIV(?)
There are a few things you should change:
1. Use 'middle' for the width and height keys in \setuplayout,
2.
footnote numbers (at the bottom).
Example:
\setuplayout
[leftmargin=\zeropoint]
\starttext
just text\footnote{foot text}
\stoptext
To get correctly placed numbers I have to either set the leftmargin
to= 5pt, or leave out the leftmargin key in setuplayout.
Is this a bug
$ context --version
MTXrun | current version: 2010.04.16 21:08
$ luatex --version
This is LuaTeX, Version beta-0.60.0-2010040422
I found that \setuptyping[numbering=line] no longer produces line
numbers any more. So are there something changed, or just it's ought to
be ok
The Chicago Manual of Style, 14th edition, states that page numbers are
normally omitted on pages containing only illustrations or tables, except in
long sequences of figures or tables. Is it practical within ConTeXt to omit
page numbers from a single page within a chapter?
Tom Benjey
717-258
Am 24.03.10 13:37, schrieb Tom:
The Chicago Manual of Style, 14th edition, states that page numbers are
normally omitted on pages containing only illustrations or tables, except in
long sequences of figures or tables. Is it practical within ConTeXt to omit
page numbers from a single page within
Hi all, Hans,
is there or can we have an easy, fast way of setting up the TeXGyre fonts so
that they use oldstyle numbers by default? I think this would be attractive at
least for the serif fonts termes, pagella, schola, which all have this feature.
All best
Thomas
On 15-3-2010 14:46, Thomas A. Schmitz wrote:
Hi all, Hans,
is there or can we have an easy, fast way of setting up the TeXGyre fonts so
that they use oldstyle numbers by default? I think this would be attractive at
least for the serif fonts termes, pagella, schola, which all have this feature
On Sun, Feb 14 2010, Hans Hagen wrote:
sqrt = math.sqrt
pi = math.pi
function my_equation(s, r)
beware, this creates (and possibly overloads) sqrt, pi and my_equation as
gobals
Indeed...
The following hack was *not* so quick, but there is a bug somewhere
(a digit is added at the
On 15-2-2010 20:35, Peter Münster wrote:
tex.write(r:gsub(%., ,))
tex.write((r:gsub(%., ,)))
gsub returns two values
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 |
Am 15.02.2010 um 20:35 schrieb Peter Münster:
On Sun, Feb 14 2010, Hans Hagen wrote:
sqrt = math.sqrt
pi = math.pi
function my_equation(s, r)
beware, this creates (and possibly overloads) sqrt, pi and my_equation as
gobals
Indeed...
The following hack was *not* so quick,
On Mon, Feb 15 2010, Andreas Harder wrote:
But the $·$-construct is problematic. It do not work in display style
(\let\calcmath\displaycalcmath) and without the dollar-signs the placement
and the spacing are wrong.
I don't know, why · doesn't work, but you can try this:
local
Hi all!
I played a little bit with LuaTeX in ConTeXt and two questions have arisen.
\usemodule[calcmath]
\starttext
\def\calculate#1{\calcmath{#1=\ctxlua{tex.print(#1)}}}
\calculate{1+2} \par
\calculate{3/2-1}\par % the output should be 0,5
\calculate{3*2}\par
% \calculate{sqrt(2)}
On Sun, Feb 14, 2010 at 11:42 AM, Andreas Harder
andreas.har...@rz-online.de wrote:
Hi all!
I played a little bit with LuaTeX in ConTeXt and two questions have arisen.
\usemodule[calcmath]
\starttext
\def\calculate#1{\calcmath{#1=\ctxlua{tex.print(#1)}}}
\calculate{1+2} \par
On Sun, Feb 14 2010, Andreas Harder wrote:
1) Is it possible to have a comma as decimal separator?
2) If you look at the above definition, it works fine with +, –, /, but
not with *. Is it possible to expand my macro that it will also work with
a multiplication or even with the last two
Am 14.02.2010 um 13:11 schrieb Peter Münster:
On Sun, Feb 14 2010, Andreas Harder wrote:
1) Is it possible to have a comma as decimal separator?
2) If you look at the above definition, it works fine with +, –, /, but
not with *. Is it possible to expand my macro that it will also work
On 14-2-2010 14:10, Andreas Harder wrote:
\startluacode
local floor = math.floor
local round = function(n) return floor(1000*n+0.5)/1000 end
sqrt = math.sqrt
pi = math.pi
function my_equation(s, r)
r = round(r)
r = tostring(r)
tex.print(s:gsub(*, $·$) .. = ..
to answer me that last question, but I find the behaviour
of other counters really strange.)
The number 1 is on frontmatter, the uppercase roman numbers are on
bodypart (without setting any conversion at all).
Mojca
On 10-2-2010 10:26, Mojca Miklavec wrote:
On Tue, Feb 9, 2010 at 20:55, Wolfgang Schuster wrote:
Am 09.02.10 20:36, schrieb Mojca Miklavec:
Hello Hans,
\currentpage (as already reported by Peter Münster) doesn't work in
MKIV (always returns 1) and \setnumber[page]{0} has zero effect (in
Hello Hans,
\currentpage (as already reported by Peter Münster) doesn't work in
MKIV (always returns 1) and \setnumber[page]{0} has zero effect (in
MKII; in MKIV I cannot test it anyway).
Thanks,
Mojca
___
If
Am 09.02.10 20:36, schrieb Mojca Miklavec:
Hello Hans,
\currentpage (as already reported by Peter Münster) doesn't work in
MKIV (always returns 1) and \setnumber[page]{0} has zero effect (in
MKII; in MKIV I cannot test it anyway).
\pagenumber?
MkIV has no counter 'page' but 'realpage',
On 9-2-2010 20:36, Mojca Miklavec wrote:
Hello Hans,
\currentpage (as already reported by Peter Münster) doesn't work in
MKIV (always returns 1) and \setnumber[page]{0} has zero effect (in
MKII; in MKIV I cannot test it anyway).
hm, i'll have a look at it
why cannot you run mkiv ... a broken
David Arnold wrote:
Hi,
Does anyone have any strategies for drawing random numbers from
various statistics distributions in Metapost? For example, say,
drawing 100 random numbers from a beta distribution?
Assuming you are using mkiv: create a lua function and use its
calculated results
any strategies for drawing random numbers from
various statistics distributions in Metapost? For example, say,
drawing 100 random numbers from a beta distribution?
Assuming you are using mkiv: create a lua function and use its
calculated results to create the metapost code. Metapost only knows
Hi,
Does anyone have any strategies for drawing random numbers from various
statistics distributions in Metapost? For example, say, drawing 100 random
numbers from a beta distribution?
David
___
If your question
On 6 déc. 2009, at 08:53, Taco Hoekwater wrote:
[…] ConTeXt has never had a very strong presence in the exact sciences.
Hi Taco and all,
In order to change this, and in order to use more easily the t-bib module, can
you please tell us how to put the cited references in square bracket in the
Otared Kavian wrote:
On 6 déc. 2009, at 08:53, Taco Hoekwater wrote:
[…] ConTeXt has never had a very strong presence in the exact sciences.
Hi Taco and all,
In order to change this, and in order to use more easily the t-bib module, can
you please tell us how to put the cited references in
Many thanks, Taco.
Best regards: OK
On 6 déc. 2009, at 10:15, Taco Hoekwater wrote:
Otared Kavian wrote:
On 6 déc. 2009, at 08:53, Taco Hoekwater wrote:
[…] ConTeXt has never had a very strong presence in the exact sciences.
Hi Taco and all,
In order to change this, and in order to use
Hi Taco,
I have assumed that ConTeXt has more authors that need APA like
citations than bracketed numbers. ConTeXt has never had a very
strong presence in the exact sciences.
If that's the case, then the \cite command does the wrong thing by default,
since it generates references as bracketed
Matthijs Kooijman wrote:
Hi Taco,
I have assumed that ConTeXt has more authors that need APA like
citations than bracketed numbers. ConTeXt has never had a very
strong presence in the exact sciences.
If that's the case, then the \cite command does the wrong thing by default,
since
Hey all,
I'm trying to use a bibliography, but it seems no numbers are show in the
biblography that is generated. The following example:
Test.tex:
=
\usemodule[bib]
\setupbibtex[database=Test]
\starttext
\section{foo}
Blaa \cite[foo] Bar
I'm trying to use a bibliography, but it seems no numbers are show in the
biblography that is generated. The following example:
Ah, using
\setuppublications[numbering=yes]
solves this. Any reason this is not the default?
I'll put this on the wiki (and stress the completeness of the manual
Matthijs Kooijman wrote:
I'm trying to use a bibliography, but it seems no numbers are show in the
biblography that is generated. The following example:
Ah, using
\setuppublications[numbering=yes]
solves this. Any reason this is not the default?
I have assumed that ConTeXt has more
)
Best regards: OK
On 24 oct. 2009, at 18:59, batela wrote:
Dear Sirs,
I'm looking a way to format float numbers. For example \ctxlua
{text.print(sqrt(2))} give me 1.41421356237309504880 but i want 1.414.
Is there a way to format real numbers.
Note: I had tried \ctxlua{a = sqrt(a) ; aformat
Am 24.10.2009 um 18:59 schrieb batela:
Dear Sirs,
I'm looking a way to format float numbers. For example \ctxlua
{text.print(sqrt(2))} give me 1.41421356237309504880 but i want 1.414.
Is there a way to format real numbers.
Note: I had tried \ctxlua{a = sqrt(a) ; aformat = string.format
Am 19.10.2009 um 14:49 schrieb Thomas A. Schmitz:
Hi all,
I could have sworn there was a thread recently about the same
question, but can't find it: I want section numbers without the
prefixed chapter number. Isn't this supposed to work?
\setuphead[section]
[previousnumber
On Oct 19, 2009, at 4:10 PM, Wolfgang Schuster wrote:
\setuphead
[section]
[sectionsegments=3:100] % show only the numbers for level 3
(=section) till 100 (subsubsub...section)
Wolfgang
Thank you Wolfgang, that does it! At the risk of sounding like a
crybaby: would one of the two
On Mon, Oct 19, 2009 at 4:28 PM, Thomas A. Schmitz
thomas.schm...@uni-bonn.de wrote:
Just imagine what would happen if Hans and Wolfgang were struck by lightning
on the same day :-)
They will rise again,
just like the Phoenix.
--
luigi
On Monday 19 October 2009 16:28:10 Thomas A. Schmitz wrote:
On Oct 19, 2009, at 4:10 PM, Wolfgang Schuster wrote:
\setuphead
[section]
[sectionsegments=3:100] % show only the numbers for level 3
(=section) till 100 (subsubsub...section)
Wolfgang
Thank you Wolfgang
Hi,
I’m new to ConTeXt and try to compile a document using XeTeX. Loading an
otf font works fine, but I don’t get it to use oldstyle numbers. google
and contextgarden did give me some hints, but I didn’t get it working. I
tried:
\starttext
\definetypeface[normalfont][rm][Xserif][Arno Pro
Am 16.09.2009 um 12:07 schrieb Arno Trautmann:
Hi,
I’m new to ConTeXt and try to compile a document using XeTeX.
Loading an
otf font works fine, but I don’t get it to use oldstyle numbers.
google
and contextgarden did give me some hints, but I didn’t get it
working. I
tried
Wolfgang Schuster wrote:
Am 16.09.2009 um 12:07 schrieb Arno Trautmann:
Hi,
I’m new to ConTeXt and try to compile a document using XeTeX. Loading an
otf font works fine, but I don’t get it to use oldstyle numbers. google
and contextgarden did give me some hints, but I didn’t get
Am 16.09.2009 um 12:25 schrieb Arno Trautmann:
Just for future questions: Where could I have found this? (I prefer
reading documentation than wasting people’s time by asking …)
-
http://context.aanhet.net/svn/contextman/context-reference/en/co-typography.pdf
-
Wolfgang Schuster wrote:
Am 16.09.2009 um 12:25 schrieb Arno Trautmann:
Just for future questions: Where could I have found this? (I prefer
reading documentation than wasting people’s time by asking …)
-
http://context.aanhet.net/svn/contextman/context-reference/en/co-typography.pdf
Hi,
\definefontfeature[default][default][onum=yes]
Just for rerefence, this works for me as well using MkIV and luatex.
Gr.
Matthijs
signature.asc
Description: Digital signature
___
If your question is of
on the wiki.
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\setuplist[chapter][pageconversionset=pagenumber]
\startstructureblockenvironment[frontpart]
\setupuserpagenumber[numberconversion
Am 06.09.2009 um 10:31 schrieb Robert Blackstone:
This is odd.
On my system (both MacTeX 2008 and ConTeXt minimals) this does not
work properly.
The code is for MkIV only and the ConTeXt in TeXLive is too old for
the new code.
The Roman numbers appear in the TOC
On Sun, Sep 6, 2009 at 3:25 PM, Robert Blackstone
blackstone.rob...@gmail.com wrote:
On Sun, Sep 6, 2009 at 12:00 PM, Wolfgang Schuster wrote
The code is for MkIV only and the ConTeXt in TeXLive is too old for
the new code.
The Roman numbers appear in the TOC but not on the textpages
On Sun, Sep 6, 2009 at 12:00 PM,Wolfgang Schuster wrote
Am 06.09.2009 um 10:31 schrieb Robert Blackstone:
This is odd.
On my system (both MacTeX 2008 and ConTeXt minimals) this does not
work properly.
What ConTeXt version do you use?
I updated the minimals today and indeed your setup
to the
problem.
As Hans suggested we should collect such setups on the wiki.
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\setuplist[chapter][pageconversionset=pagenumber]
\startstructureblockenvironment
Derek CORDEIRO wrote:
Thanks a lot, it works as required. I added a note to the wiki
Table_of_Contents page. Just an unrelated question, Since MkIV is quite
different and incompatible with MkII, wouldn't it be better to keep all MkIV
specific information separate in the wiki?
keep in mind that
On Fri, Sep 4, 2009 at 2:07 AM, Wolfgang Schuster
schuster.wolfg...@googlemail.com wrote:
Am 03.09.2009 um 15:30 schrieb Derek CORDEIRO:
The following minimal example is not working under MkIV. However it works
under MkII
\setuppagenumbering[conversion=romannumerals]
collect such setups on the wiki.
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\setuplist[chapter][pageconversionset=pagenumber]
\startstructureblockenvironment[frontpart]
\setupuserpagenumber[numberconversion
The following minimal example is not working under MkIV. However it works
under MkII
\setuppagenumbering[conversion=romannumerals]
\starttext
\input knuth
\stoptex
What am I doing wrong?
LuaTeX, Version beta-0.43.0-2009081914
Regards,
Derek
Am 03.09.2009 um 15:30 schrieb Derek CORDEIRO:
The following minimal example is not working under MkIV. However it
works under MkII
\setuppagenumbering[conversion=romannumerals]
\setupuserpagenumber[numberconversion=romannumerals]
Wolfgang
, with captions added etc. I would like to restart their numbering,
so the figure-numbers of the large images match the small ones but
\startnumbering[state=stop] does not have any effect.
Is there any other way of stopping/restarting figure numbering?
Thanks a lot,
Femke
Hi Hans,
In the following test, \in{}[] typesets the correct part/chapter/section
number, but doubled up as in Chapter 2.32.3 instead of Chapter 2.3.
\starttext
\placecontent
\part[pt:foo_bar_baz]{Foo, Bar, Baz}
\chapter[ch:foo]{Foo}
\in{Chapter}[ch:baz1]
\chapter[ch:bar]{Bar}
On Mon, May 25, 2009 at 11:43 PM, Khaled Hosny khaledho...@eglug.orgwrote:
On Fri, May 22, 2009 at 12:04:08PM +0200, Alan Stone wrote:
On Fri, May 22, 2009 at 11:42 AM, Khaled Hosny khaledho...@eglug.org
wrote:
How can I disable page numbers (or header/footer) in empty pages
On Tue, May 26, 2009 at 10:53:30AM +0200, Alan Stone wrote:
\setupsectionblock[bodypart][page=yes]
\setupmakeup[standard][page=empty]
\definepagebreak
[mychapterpagebreak]
[yes,header,footer,right]
\setuphead
[chapter]
[page=mychapterpagebreak]
On Tue, May 26, 2009 at 3:12 PM, Khaled Hosny khaledho...@eglug.org wrote:
On Tue, May 26, 2009 at 10:53:30AM +0200, Alan Stone wrote:
\setupsectionblock[bodypart][page=yes]
\setupmakeup[standard][page=empty]
\definepagebreak
[mychapterpagebreak]
[yes,header,footer,right]
On Fri, May 22, 2009 at 12:04:08PM +0200, Alan Stone wrote:
On Fri, May 22, 2009 at 11:42 AM, Khaled Hosny khaledho...@eglug.org wrote:
How can I disable page numbers (or header/footer) in empty pages, as
page 2 in the following example:
\setuppagenumbering[alternative
How can I disable page numbers (or header/footer) in empty pages, as
page 2 in the following example:
\setuppagenumbering[alternative=doublesided]
\starttext
\chapter{one}
\input tufte
\chapter{two}
\input tufte
\stoptext
Regards,
Khaled
--
Khaled Hosny
Arabic localiser and member
601 - 700 of 900 matches
Mail list logo