!
[cid:image001.png@01D3B46E.694EA3C0]Jay Maynard | Software Engineer
Kahler Automation<http://www.kahlerautomation.com/> | 808 Timberlake Road,
Fairmont, MN 56031 | Main: 507-235-6648
jmayn...@kahlerautomation.com<mailto:jmayn...@kahlerautomation.com>
The information in this c
Olimex config files are incorrect
for the output definitions. I've traced the lines from the JTAG connector back
to the FTDI chip, and they seem correct, but I'm no expert there.
[cid:image001.png@01D3B133.AF11E3B0]Jay Maynard | Software Engineer
Kahler Automation<http://www.kahler
g written as 1
to a register that the architecture defines as should be zero.
I've spent some time online on the IRC channel trying to get this running with
the help of some folks there, but no luck. They suggested I ask you folks. Any
ideas?
[cid:image001.png@01D3AA54.F60EDBA0]Jay Ma
t, to, say, 4.7K?
From: Tomas Vanek [mailto:tom_...@users.sourceforge.net]
Sent: Friday, February 23, 2018 4:38 PM
To: Jay Maynard
Cc: openocd-devel@lists.sourceforge.net
Subject: Re: [OpenOCD-devel] Atmel ATSAME70 examination incomplete at startup
I connected my custom SAME70 board to a FT
's on sale for 50% off ($65 for the kit). Anyone out there
using a SAME70 that's *not* on the Xplained board?
From: Jay Maynard [mailto:jmayn...@kahlerautomation.com]
Sent: Friday, February 23, 2018 3:28 PM
To: openocd-devel@lists.sourceforge.net
Subject: [OpenOCD-devel] Atmel
g written as 1
to a register that the architecture defines as should be zero.
I've spent some time online on the IRC channel trying to get this running with
the help of some folks there, but no luck. They suggested I ask you folks. Any
ideas?
Jay Maynard | Software Engine
that the architecture defines as should be zero.
I’ve spent some time online on the IRC channel trying to get this running
with the help of some folks there, but no luck. They suggested I ask you
folks. Any ideas?
--
Jay Maynard, K5ZC
http://plus.google.com/+JayMaynard
g written as 1
to a register that the architecture defines as should be zero.
I've spent some time online on the IRC channel trying to get this running with
the help of some folks there, but no luck. They suggested I ask you folks. Any
ideas?
[cid:image001.png@01D3AA54.F60EDBA0]Jay Ma
