Thank you for your answer.
I'd prefer to have explicit callbacks from hostapd (maybe to a script)
to preserve those changes.
I see that hapd_wps_cred_cb is called to update hostapd config. We can try
here (somehow, maybe script?) update UCI config file.
But what about this scenario:
1) Run
Hi all,
Set the wan as 3g mode, but after reboot, it doesn't work.
That's because the /etc/init.d/network starts already but usbmode is not
ready so 3g doesn't work.
I suggest starting usbmode before network.
Winton
0001-usbmode-start-usbmode-earlier-than-network.patch
This patch is for openwrt_12.09 (AA) kernel 3.3.8
It adds the function for the case that having calibration data in eeprom of
wifi pci card.
Compat-wireless provides the way AH_USE_EEPROM(see the macro below) to read
the calibration data,
but the ap91_pci_init functionalities does has the
This patch can fix the issue that ethernet crash or turns into disable status
when initiating multi ssid (8 for each band, total is 16)
For more detail, please refer to https://dev.openwrt.org/ticket/15244
My suggestion is to move the line /sbin/wifi down in the front of stop
when
Hi, Just got my my chance to try this router. It's 2014 now and my
comments are late... Sorry, but getting this board supported in the
OpenWrt trunk is really good.
For those interested, the original patch can be found at the following URL.
http://patchwork.openwrt.org/patch/4244/
On
Using Bleeding Edge, r39770. /var/dhcp.leases is always empty, no matter
how many hosts in the lan got assigned IPv4 addresses. LUCI also shows
There are no active leases.
Strange enough, LUCI shows multiple hosts under IPv6 DHCP section. This
single fact means IPv6 leases are not stored in
Hi,
On 26 March 2014 20:56, Zhang Weiwu zhangwe...@realss.com wrote:
Using Bleeding Edge, r39770. /var/dhcp.leases is always empty, no matter how
many hosts in the lan got assigned IPv4 addresses. LUCI also shows There
are no active leases.
Not sure about this, but I can confirm that r40007
Hi,
On 26 March 2014 21:07, Yousong Zhou yszhou4t...@gmail.com wrote:
Hi,
On 26 March 2014 20:56, Zhang Weiwu zhangwe...@realss.com wrote:
Using Bleeding Edge, r39770. /var/dhcp.leases is always empty, no matter how
many hosts in the lan got assigned IPv4 addresses. LUCI also shows There
On Wed, 26 Mar 2014, Yousong Zhou wrote:
Can you check your /etc/config/dhcp and the generated
/var/etc/dnsmasq.conf and confirm that option leasefile is properly
configured?
Yes, I can confirm in both files the correct path is configured:
/tmp/dhcp.leases, which is /var/dhcp.leases
Using Bleeding Edge.
opkg list | grep mule yeilds nothing. A visite to the package list
http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/
confirms that not any mule is there.
I shouldn't be using the Bleeding Edge (not a developer myself) but it was
so when I got the box. First I
On Wed, 26 Mar 2014, Jiří Šlachta wrote:
buildbots says that amule is currently broken (=buildbots are
not able to compile amule).
You can wait for this patch to be tested, accepted and applied
( http://patchwork.openwrt.org/patch/5047/ ) or to compile amule
for OpenWrt by yourself.
Thank
From: Andreas Thienemann andr...@bawue.net
Offer better SMS integration for the gnokii package:
gnokii-sendsms is a ncurses/dialog based frontend to interactively send
a SMS message through a supported modem.
gnoki-smsd is a SMS spooling service based on gnokii. Messages dropped
into a
On Tue, Mar 25, 2014 at 4:50 PM, Felix Fietkau n...@openwrt.org wrote:
On 2014-03-25 16:44, Helmut Schaa wrote:
On Thu, Mar 20, 2014 at 4:26 PM, Helmut Schaa
helmut.sc...@googlemail.com wrote:
Introduce a new device event topology change that gets signaled
by bridges on adding/removing
Signed-off-by: Helmut Schaa helmut.sc...@googlemail.com
---
Changes in v2: Tell netifd core that we have a renew handler
package/network/ipv6/odhcp6c/files/dhcpv6.sh | 8
1 file changed, 8 insertions(+)
diff --git a/package/network/ipv6/odhcp6c/files/dhcpv6.sh
Signed-off-by: Helmut Schaa helmut.sc...@googlemail.com
---
Changes in v2: Tell netifd core that we have a renew handler
package/network/config/netifd/files/lib/netifd/proto/dhcp.sh | 8
1 file changed, 8 insertions(+)
diff --git
On Wed, Mar 26, 2014 at 5:41 PM, Jonas Gorski j...@openwrt.org wrote:
On Wed, Mar 26, 2014 at 5:11 PM, Helmut Schaa
helmut.sc...@googlemail.com wrote:
Signed-off-by: Helmut Schaa helmut.sc...@googlemail.com
---
Changes in v2: Tell netifd core that we have a renew handler
On Wed, Mar 26, 2014 at 5:11 PM, Helmut Schaa
helmut.sc...@googlemail.com wrote:
Signed-off-by: Helmut Schaa helmut.sc...@googlemail.com
---
Changes in v2: Tell netifd core that we have a renew handler
package/network/ipv6/odhcp6c/files/dhcpv6.sh | 8
1 file changed, 8
I needed to add the ATA drivers to the defalut x86_64 kernel config to get the
VMware disk images booting.
Tested and verified functioning on VMware Workstation 9.0.3 .
diff --git a/target/linux/x86_64/config-default b/target/linux/x86_64/config-
default
index ad27973..76922a7 100644
---
I have a netgear r6300v1 and would like to help port it to openwrt. I have
compiled the netgear toolchain as well as the dd-wrt toolchain for this
router from source. Serial cable is attached and nand support is now with
openwrt so using these tools at my disposal I would like to help create a
2014-03-26 9:13 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
It's clear that SOMETHING is getting time-limited, but I have distance=0 and
dissassoc_low_ack=0 on both the AP and the station, and I'm not sure what
else I can tweak.
Configure distance parameter according to real distance between
Hi,
almost the same patch submitted a while ago was rejected. I do not think your
patch will be accepted, see:
http://patchwork.openwrt.org/patch/4832/
Jiri
On March 26, 2014 6:16:44 PM CET, Darren Lissimore darren.lissim...@gmail.com
wrote:
I needed to add the ATA drivers to the defalut
On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov ryazanov@gmail.com
wrote:
2014-03-26 9:13 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
It's clear that SOMETHING is getting time-limited, but I have
distance=0 and
dissassoc_low_ack=0 on both the AP and the station, and I'm not sure
what
On Wed, Mar 26, 2014 at 3:04 PM, Bill Moffitt bmoff...@ayrstone.com wrote:
On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov ryazanov@gmail.com
wrote:
2014-03-26 9:13 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
It's clear that SOMETHING is getting time-limited, but I have
* Jonas Gorski j...@openwrt.org [26.03.2014 20:18]:
+proto_dhcpv6_renew() {
+ local interface=$1
+ # SIGUSR1 forces odhcp6c to renew its lease
+ proto_kill_command $interface 16
SIGUSR1 is 16 only for mips; other arches use different values (see
e.g.
2014-03-26 23:04 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov ryazanov@gmail.com
wrote:
2014-03-26 9:13 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
It's clear that SOMETHING is getting time-limited, but I have distance=0
and
Hi Bastian,
Le 26/03/2014 20:25, Bastian Bittorf a écrit :
* Jonas Gorski j...@openwrt.org [26.03.2014 20:18]:
+proto_dhcpv6_renew() {
+ local interface=$1
+ # SIGUSR1 forces odhcp6c to renew its lease
+ proto_kill_command $interface 16
SIGUSR1 is 16 only for mips; other
On 3/26/2014 12:36 PM, Sergey Ryazanov wrote:
2014-03-26 23:04 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov ryazanov@gmail.com
wrote:
2014-03-26 9:13 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
It's clear that SOMETHING is getting
With this patch OpenWRT supports the following on the ZyXEL NBG 6716:
-WiFi 2G
-WiFi 5G
-NAND flash
-2 Ethernet interfaces
-USB
-LEDs (except switch LEDs)
-sysupgrade process
-reasonale defaults at first boot
Signed-off-by: André Valentin avalen...@marcant.net
---
Normally a jffs fs start with a know marker. If ubi is used, the
partition does not habe such a marker. Just 0x. This patch
checks if the partition is of type ubivol and has 0x at the
beginning. In this case the partition is mounted as a jffs.
Signed-off-by: André Valentin
29 matches
Mail list logo