I would appreciate your help, if anyone can help me out finding a MIPS OWFS
ipkg (instead of MIPSEL OWFS).
Thanks.
--
View this message in context:
http://www.nabble.com/MIPS-vs-MIPSEL-in-OWFS-tf4382186.html#a12492349
Sent from the OWFS - Dev mailing list archive at Nabble.com.
-
to us.
Suman-
Christian Magnusson-2 wrote:
>
>
>
> I haven't setup any development-tree with MIPS target yet. I'll see what I
> can do. and see if I have enough with diskspace to make more targets.
>
>
>
> /Christian
>
>
>
>
&
Thanks, Christian.
I'll try it out, and get back to you soon.
Suman-
----
suman- wrote:
>
> Hi,
> I installed openwrt (kamikaze) with MIPS (i.e. big endian) for my
> AP.
> Now I\'ve a difficulty in installing OWFS in the AP.
> All the openwrt OWFS
Yes, of course, Paul!
But ... I didn't say that owfs won't support DS2781K!
It's the issue of pin compatibility: 4-pin serial vs. standard 9-pin DS9097
... how do I fit 9-pin DS9097 to my 4-pin interface, and if owfs would still
be able to detect and mount '/dev/ttyS0', etc.
Thanks.
r board is probably not.
>
>
>
> Look at the drawing at:
>
> http://owfs.sourceforge.net/adapters.html#Serial
>
> Picture: <http://owfs.sourceforge.net/adapters/adapter.gif>
> http://owfs.sourceforge.net/adapters/adapter.gif
>
>
>
> /Christian
>
--
>
> GND + original schema..
>
> RXD -
>
> TXD -
>
>
>
> I don't think you wrote this in your reply. Does anyone else agree with
> this?
>
>
>
> /Christian
>
>
>
mailto:[EMAIL PROTECTED] On Behalf Of Paul
> Alfille
> Sent: den 15 september 2007 07:25
> To: owfs-developers@lists.sourceforge.net
> Subject: Re: [Owfs-developers] MIPS vs MIPSEL in OWFS
>
>
>
> Lets be systematic.
> DS9097 or DS9097U
> Any problems with permissi
o is pulled out from /dev/ttyS0 (as I
said, even cat /dev/ttyS0 is not showing any info).
Any suggestion?
Paul Alfille-2 wrote:
>
>>
>> Lets be systematic.
>> DS9097 or DS9097U
>> Any problems with permissions? (root?)
>> Try running with --error_lev
njh, just tried local echoing by shorting Tx and Rx with 9-25 converter ...
works fine.
So, /dev/ttyS0 is OK.
njh-2 wrote:
>
> On Sat, 15 Sep 2007, suman- wrote:
>
>> Any suggestion why am I not getting any info?
>
> I don't see any problems with you
the rs232-port is open and ready.
> This means that you have to use one max3232 pin for converting the Vcc to
> the negative signal which is a logical "1".
>
> /Christian
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:owfs-
>> [EMAIL PROT
Does anyone know where can I get a few more DS9097 and DS9490 adapters?
I am trying to buy them turns out to be very hard to find them ...
even Dallas Semiconductor has a lead time of a few weeks.
Suman
--
View this message in context:
http://www.nabble.com/DS9097-and-DS9490
OWFS?
If this is not available, is there any way out?
Thanks in advance.
<!--
if( Nabble.ads ) {
Nabble.ads();
}
//--> Suman
if( self == top ) {
Nabble.writeReturnToLink(
\'<a href=\"\'
+( Nabble.tview == \"dump\&
Hi, Here are my takes on installing OWFS in Kamikaze big enadian: it
installed OK with all libraries for MIPS (big endian), and file system looks
alright. But while running OWFS, I\'ve a few problems. 1. I
tried \"owfs -d /dev/ttyS0 /mnt/1wire\". It fails with \"DEFAULT: Cannot detect
DS9097
Hi Christian, Here are some clarifications re: Meraki AP\'s serial
interface. This interface is NOT a regular 9-pin interface (DB9) as you
see in WRT54G. It has only 4 pins: Vcc, Tx, Rx, and GND. OWFS can only
support DS9097 serial adapter, I presume, which has a regular 9-pin serial
configura
D] On Behalf Of suman sarkarSent: den 12 september
2007 01:59To: owfs-developers@lists.sourceforge.netSubject:
[Owfs-developers] Re :Re: Re :Re: MIPS vs MIPSEL in OWFS
Hi Christian, Here are some clarifications re: Meraki AP\'s
serial interface.
I tried some voltage sensing with DS2781K Maxim chip, which is connected
to a DS9097 serial adapter through RJ11. I\'ve installed all necessary
software, but not been able to pull out any information from the mounted
directory (/mnt/1wire). My laptop\'s serial port is set to baud rate
9600. He
16 matches
Mail list logo
