this, and how
could I change it back? I'm using Winamp 5.65. Thank you.
Regards,
Samuel Wilkins.
It's basically what used to be the Edirol R09HR, so it works in pretty
much the same way.
On 10/10/2016 16:51, Hamit Campos wrote:
Ah I see. That's fine. How's that recorder?
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent
was epic. I'd love 1 of those recorders.
Those things are so epic.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent: Monday, October 10, 2016 3:20 AM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: Preamp for Co
] On Behalf Of Samuel
Wilkins
Sent: Sunday, October 9, 2016 4:01 PM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: Preamp for Computer
I've got a friend who has a Shure SM58, I could borrow his and try it out.
I have a Rode M3 condenser microphone which uses a batte
on whether or not your sound card had a mic boost, the
volume might be too low for a shure sm58. You can test that out. You
would definitely need phantom power for a condenser mic, unless you
got a condenser mic that could run on battery as well asphantom power.
On 10/9/2016 3:29 PM, Samuel Wilkins
probablydon't need
a preamp.
On 10/9/2016 1:18 PM, Samuel Wilkins wrote:
Hello everyone,
I am thinking of trying a Shure SM58 with a minijack adapter for
recording myself and my screen reader at the same time. However, I
was wondering, is there a preamp that will connect to the microphone
Hello everyone,
I am thinking of trying a Shure SM58 with a minijack adapter for
recording myself and my screen reader at the same time. However, I was
wondering, is there a preamp that will connect to the microphone jack on
my computer? I'm concerned about using a USB one, because if the
be attached to anything
and it obscures all of the buttons.
Any suggestions anyone has would be much appreciated.
--
Regards,
Samuel Wilkins
w?
Thanks,
John
--
Regards,
Samuel Wilkins
Hello everyone,
I am considering trying out the Vocaloyd software from Yamaha. However,
I was wondering if anyone can tell me whether it is accessible with a
screen reader. Thank you.
--
Regards,
Samuel Wilkins
digitised.
--
Regards,
Samuel Wilkins
Well, the only way you can do that is by changing the pitch, and make
sure the tempo is unchanged. However, you may get artifacts, and then
you need to mix it.
On 03/11/2015 03:51, Michael Amaro wrote:
fake overdubbing
--
From: "Samuel Wi
n all time."
--
Regards,
Samuel Wilkins
software.
http://www.avast.com
--
Regards,
Samuel Wilkins
accessible? Thank you in advance.
Regards,
Samuel Wilkins
I can get sounds,
effects, beats and other content for use in producing short radio
sweepers, idents and promos. Free is always best but willing to pay
for good content if you have any suggestions.
Many thanks, Danny
--
Regards,
Samuel Wilkins
this might be? I am considering migrating to Sound Forge, but
I was wondering if there are tutorials or anything out there to tell me
how I can use this sound editor with a screen reader? Thank you. keys
--
Regards,
Samuel Wilkins
, unless what you want it to do, it will do
better than GW.
or, of course you enjoy working with alternative audio editors. equally
justifyable.
Joe
On Mon, 20 Jul 2015 08:51:32 +0100
Samuel Wilkins sound...@spwnet.co.uk wrote:
Hello everyone, I am having 2 problems with Goldwave. I am using
I will be obtaining an OpticBook 4800 for flatbed scanning, as it is scans
very quickly. I would not recommend the A300, unless you plan to use it in
a learning resource centre or similar information centre. Also, it should
be noted that you will need to proofread what you are scanning, as even
I agree, I would be cautious about such claims. Personally, I would much
prefer to have information from a human rather than technology. Also, it
could result in over reliance on Horus, and it is something extra that has
to be carried.
-Original Message-
From: Pc-audio
Also, if it is supposed to give verbal feedback to you, how can we hear how
it actually sounds and what it says if the video does not have sound?
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Peter
Scanlon
Sent: 28 December 2014 22:03
To: PC Audio
Hello everyone,
I am thinking about doing a radio course in a few months, and the station
use Adobe Audition 5.5 on their editing machines, and Mairlist as their
playout system. I was wondering how accessible these 2 pieces of software
are for use with Window-Eyes?
Regards,
Samuel
Hello everyone,
Does anyone know of any good wireless speakers that have a sound comparable
to or better than my JBL on tour speakers? I have been considering the
Jawbone Jambox speakers, but I was wondering if theyhave the same quality as
the JBLs?
the Jawbone Jambox, you can do better than that and the pick of the
bunch seems to be the Bose Soundlink Mini, I should know as I had a Jawbone
Jambox, the greatest pleasure I had was throwing int into the bin.
On 29 Nov 2014, at 8:15 pm, Samuel Wilkins clevercl...@gwilkins.co.uk
wrote:
Hello everyone
Hello Michael, the answer is that it is completely inaccessible. However,
they are going to be talking about it on Tec Talk next week.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Michael
Amaro
Sent: 13 November 2014 18:36
To:
, they connect just as an external drive, with an
assigned drive letter.
HTH
Joe
On Sun, 19 Oct 2014 21:20:40 +0100
Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
Hello Joe,
Can you please give me a model to give her? Thank you.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc
models should be compatible with guide as wel. Download a demo
for testing if you wish, let me no if you need a link.
On 20/10/2014, Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
Hello Joe,
Please do, thank you. My friend is not familiar with different models,
and
she will have someone
.
Regards,
Samuel Wilkins
would think that one of the better olympus machines might fit the bill.
There is enough voice feedback available to make it accessible, to the
points where your friend may require.
HTH
Joe
On Sun, 19 Oct 2014 20:29:31 +0100
Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
Hello everyone,
I have
-audio-boun...@pc-audio.org] On Behalf Of
Sunshine
Sent: Monday, June 23, 2014 5:23 PM
To: PC Audio Discussion List
Subject: Re: How accessible is spotify?
do the jaws scripts work with the web player/site or the spotify software?
On 6/23/2014 3:58 PM, Samuel Wilkins wrote:
Hello Randy
Hello Randy, the short answer is that it isn't accessible. I have been
trying to get the company to make it accessible, but even though the support
department is very sympathetic, it is the developers who need a wake-up
call. I do not see why an app for Window-Eyes could not be written to
Hello Clive, press F11 and go to devices. Tab until you get to recording
and you should find a list of options including microphone, line-in and
stereo mix or what you hear. Select that and press OK. Hope this helps.
-Original Message-
From: Pc-audio
[mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent: 11 May 2014 08:17
To: 'PC Audio Discussion List'
Subject: RE: Changing sound source when recording in Goldwave
Hello Clive, press F11 and go to devices. Tab until you get to recording
and you should find a list of options
Hello Brian, episode 2 has not yet been broadcast. Therefore, you will not
be able to download it yet. It will be broadcast on Sunday at 5:00 PM GMT
on Sunday, which I think will be about 12:00 PM EST. Also, if you want
episode 1 to be heard by the grandchildren after Sunday, you may wish to
I have actually been considering moving from Goldwave to another audio
editor, and after hearing some bad reviews of Adobe Audition's compatibility
with screen readers, I think Sound Forge might be my best bet. Is there a
guide available for how to use it with a screen reader?
Regards,
Samuel
Hello everyone,
The screen on my Edirol R09HR has died, and if I cannot get this repaired, I
will need a replacement recorder. Since Roland has abandoned its Edirol
brand, I was wondering if there is a comparable recorder available.
Regards,
Samuel Wilkins.
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: st...@comproom.co.uk
Web: http://www.comproom.co.uk
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent: 20 March 2014 11:03
To: 'PC
Well, I don't tend to use built-in microphones, I have noticed that with the
Soundman or Roland CS10EM in ear microphones, the sound quality is really
good.
Regards,
Samuel Wilkins.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Steve
Nutt
Sent
Hello Ketan, the only way I can think of to convert Audible books is to record
them while they are playing. I have had limited success with Sound Taxi. I
normally set Goldwave to record, and tell it to auto save and shut down
afterthe book has finished, and let it record overnight. I then
In that case, what you can do is find a good place to stop when you need to use
the computer, and start recording from where you left off the next night. When
I tried using Sound Taxi, it would sometimes include audio from other sources
which I did not want. Hope this helps.
-Original
I have been in contact with Spotify support about the accessibility of the
Windows client, and have found them very helpful. They have told me that
they are working on making it more accessible, and are keeping me informed.
Hope this helps.
-Original Message-
From: Pc-audio
Hello everyone, I am having a new problem with Winamp. Every time I try to
wrip a CD now, it only says that the title of the track is track and the
number, such as track 1, track 2, track 3 etc. I know this is not what it
actually is, but every time I try to get it to tag, it says no matches
Hello everyone, I have just upgraded to the latest version of Winamp. Even
though I use Winamp Pro, it wouldn't let me download it, so I had to
download Winamp standard. After doing this, I checked and it said I had a
valid license of Winamp Pro, but it would not let me find the Winamp library
Hello Andre, I have a Yettie too, however I have found when trying to
record, if I want to record the direct sound as well as the microphone, I
get latency, which is very destracting, and I have not found out a way of
resolving this.
-Original Message-
From: Pc-audio
Deventer
Sent: 06 September 2013 16:02
To: 'PC Audio Discussion List'
Subject: RE: yeti blue usb microphone
Interesting
Is this while using the earphone monitor output of the microphone?
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Hello Dane, it is not very accessible. It is possible to search for a
genre, artist or title of a song and to play the results in the list, but it
is not easy to determine what you are listening to when using the arrow
keys. I have written to Spotify UK, and hopefully there will be some change
Hello Joe, I use a Yeti USB microphone and it works very well. Another
microphone I would recommend are the Roland CS10EM microphones, which can
plug into your computer's microphone jack. These microphones are in-ear
microphones, but can also double as earphones, and cost £80, which is around
Hello Joe, I have had this problem before when I tried to use a tape
converter. It mutes all sound except for that from the tape machine. You
may have to use sighted help to do your converting until you unplug the USB
cable.
-Original Message-
From: Pc-audio
Hello everyone, I am thinking of obtaining a Sound Blaster X-Fi Titanium HD
soundcard, however one of the things I would like to do is record using What
you Hear, and I have read on some of the forums that it is difficult doing
this with this sound card. Has anyone had any joy recording in What
and collections of vst's
hi,
I am using reaper and goldwave
thanks
On 2/22/13, Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
Hello, one thing you need to remember is that many VST plug-ins are not
free, and they all vary in accessibility. What kind of effects do you
want,
and what audio editor
Hello, one thing you need to remember is that many VST plug-ins are not
free, and they all vary in accessibility. What kind of effects do you want,
and what audio editor are you using?
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of
Kaveinthran
Hello Joe, I did not use to have these problems with XP, but I do under
windows 7.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joe P
Sent: 20 January 2013 23:22
To: PC Audio Discussion List
Subject: RE: Latency with Microphones and Soundblaster
Then perhaps you must check compatibility with win7.
On 21/01/2013, Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
Hello Joe, I did not use to have these problems with XP, but I do under
windows 7.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joe P
Discussion List
Subject: Re: Latency with Microphones and Soundblaster Audigy Soundcard
Hi, I don't have your card, but if this card has asio drivers you might
try to use them, with asio you'll get almost 0 latency.
hth,
Best regards,
Gianluca.
SkypeID: gianluca8815
Il 18/01/2013 21:20, Samuel
to the motherboard. That will help alot.
Not only sound wise, but also for driver related stuff. Real tech is
good. Try them. But if you want to buy another nun motherboard card,
then you have wider options.
On 19/01/2013, Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
I don't know whether
Hello everyone, I am having a problem with my new sound card drivers with
Goldwave. I recently installed the latest drivers for my Soundblaster
Audigy 2ZS card, but when I try to record something in Goldwave through What
you Hear, the audio sounds different to what I am hearing through my
Hello Joe, I cannot find anything on the Creative forums.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joe P
Sent: 18 January 2013 09:17
To: PC Audio Discussion List
Subject: RE: Latency with Microphones and Soundblaster Audigy Soundcard
Hello
the youtube url for the realtek to do what you are
trying to do i am trying to help a friend with their real tek sound card.
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Friday, January 18, 2013 10:17 AM
I wonder whether upgrading to a new creative card will help.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joe P
Sent: 18 January 2013 18:27
To: PC Audio Discussion List
Subject: RE: Latency with Microphones and Soundblaster Audigy Soundcard
Hi
Hello everyone, I am using a Soundblaster Audigy 2zS Soundcard in Windows 7,
and whenever I plug in a microphone, be it USB or direct, I get latency when
listening to it through headphones , and that causes problems when
recording, mainly that the echo is very distracting. Does anyone know why
and you here what you recording directly. Anyway, I guess that
something between the headphones and the master output is rong.
On 17/01/2013, Samuel Wilkins clevercl...@gwilkins.co.uk wrote:
Hello everyone, I am using a Soundblaster Audigy 2zS Soundcard in Windows
7,
and whenever I plug
Hello Joe, what I am doing is to choose the microphone in recording devices,
choose properties, and choose to listen to the device. I saw a youtube
video on how to reduce the latency, however that was with a realtech
soundcard, and I am not sure of the Creative equivalent to the Realtech
sound
Hello everyone, I have decided to give Sound Forge a go. However, I was
wondering if there is a list of hotkeys used in Sound Forge that I can look
at? Thank you.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
. Though, I'm
looking to see If we can be able to use other vsts with cake talking.
i
-Original Message-
From: Samuel Wilkins [mailto:clevercl...@gwilkins.co.uk]
Sent: Tuesday, December 04, 2012 1:54 PM
To: 'PC Audio Discussion List'
Subject: RE: Accessibility of Adobe Audition
Thank you
Thank you.
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Don Breda
Sent: 05 December 2012 19:57
To: PC Audio Discussion List
Subject: Re: Accessible Impulse Response Converter
IF you use window-eyes use the 32 bit version of reaper and use the
cumings
Sent: 04 December 2012 01:37
To: PC Audio Discussion List
Subject: Re: Accessibility of Adobe Audition
Samuel why don't you try reaper with re-access. It is a very accessible
multitrack recorder and only costs $60.
- Original Message -
From: Samuel Wilkins clevercl
[mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent: Monday, December 03, 2012 12:44 PM
To: 'PC Audio Discussion List'
Subject: RE: Accessibility of Adobe Audition
The reason I am interested in using Adobe Audition is because of its
multitrack editing capabilities, as I have some
of GW Micro
might be willing to see if something can be done with the app.
While I am not unhappy with Sound Forge, I would consider moving back to
Audition if it works reasonably.
Good luck.
Best regards,
Steve Jacobson
On Sun, 2 Dec 2012 15:21:31 -, Samuel Wilkins wrote:
Hello everyone
etc.
Tapin-radio coordinator
URL: http://www.tapinradio.com/
Facebook: http://facebook.com/tapinradio
Twitter: http://twitter.com/tapin_radio
Skype: tapinradio
- Puvodní zpráva -
Od: Samuel Wilkins
Komu: PC Audio Discussion List
Odesláno: 2. prosince 2012 16:21
Predmet
Hello everyone, I am considering migrating to Adobe Audition. However, I
was wondering how accessible the latest version is with a screen reader. I
am using Window-Eyes as my reader. Thank you.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent: Thursday, November 22, 2012 11:35 AM
To: 'PC Audio Discussion List'
Subject: RE: Accessible Impulse Response Converter
Hello Rob, thank you for your response. How accessible is Reeper
Hello everyone, I was wondering if anyone knows of an accessible programme
that can convert wave files into impulse response files to use with sound
files. I am studying impulse response files for making convolution reverb
in university, and I am interested in making my own. Thank you.
To
Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Samuel
Wilkins
Sent: Thursday, November 22, 2012 7:09 AM
To: PC Audio Discussion List
Subject: Accessible Impulse Response Converter
Hello everyone, I was wondering if anyone knows of an accessible programme
that can
-Info. I think people
were using it with Window-Eyes, but that there was some sort of problem but
don't remember what it was or how serious it was.
Best regards,
Steve Jacobson
On Thu, 22 Nov 2012 17:34:32 -, Samuel Wilkins wrote:
Hello Rob, thank you for your response. How accessible
. Don't
have the url, but you can google them.
twitter
http://twitter.com/richardclayppol
last.fm
http://www.last.fm/user/lord_of_beer
msn
bellevue@gmail.com
skype
lord_of_beer
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio
Hello everyone, does anyone know if it is possible to stream youtube videos
using Winamp. I am unable to access many of the controls in the flash
window, and I would like to be able to rewind and fast forward in videos.
Thank you.
To unsubscribe from this list, send a blank email to:
Hello everyone, I am considering purchasing Adobe Audition, as I may need to
do some audio multitrack editing soon. However, I was wondering how much it
costs, and how accessible it is with the Window-Eyes app written for
Audition. Thank you.
To unsubscribe from this list, send a blank email
.
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Saturday, August 04, 2012 3:29 PM
Subject: Adobe Audition
Hello everyone, I am considering purchasing Adobe Audition, as I may need
to
do some audio multitrack
only
or video only.
6. Tab to close and press space.
Once you do this, Winamp should be the default for the selected file types.
Regards,
Barry Chapman
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent
Hello everyone, when a wave file or MP3 file is accessed on the internet,
Quicktime automatically comes up. I would like to set it so that when I
press enter on an MP3 file or Wave file to download, it automatically comes
up, or so that it asks me if I want to save or open, and if I press open,
not a nice easy answer i know but it will
make you a stronger person. smile
bb
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Thursday, May 31, 2012 7:07 AM
Subject: Panning in Goldwave
Hello everyone, I am trying
Hello everyone, I am trying to pan something in goldwave. However, I only
want a sound to be slightly right, about 20% right, however when I try and
do that in Goldwave, it spans hard left or right throughout the selection.
How can I achieve panning only slightly left or right? I am using
Thank you Daivd. I've sorted out the problem with the noise reduction.
-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of David Bailes
Sent: 31 May 2012 10:18
To: PC Audio Discussion List
Subject: RE: Good Hum Removal Programme or
Hello everyone, I have been recording an audio book for release, however the
studio had some hum in it that I could not track down. I would like to be
able to remove that hum as much as possible. Does anyone know of a good hum
removal programme, or a good noise reduction VST plug-in that will work
-
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Wednesday, May 30, 2012 9:01 AM
Subject: Good Hum Removal Programme or Noise Reduction VST Plug-in
Hello everyone, I have been recording an audio book for release, however
the
studio had
at:
ftp.compuconference.com
Navigate to the FreeVerb plugin. It's a good one.
Cheers.
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Tuesday, April 03, 2012 6:47 AM
Subject: Good VST Reverb Plug-in
Hi everyone, I am upgrading
to my server at:
ftp.compuconference.com
Navigate to the FreeVerb plugin. It's a good one.
Cheers.
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Tuesday, April 03, 2012 6:47 AM
Subject: Good VST Reverb Plug
-
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, March 19, 2012 3:51 PM
Subject: Tagging Multiple Files with Winamp
Hello everyone, I was wondering, is there a way to tag several wripped
tracks with Winamp? It says
cursor to your pc curor.
TMGHT B OTHR WASTO THIS BUT HSH IGET HE JO
DNIFFFER JUT S
ht
bb
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, March 19
Hello everyone, I was wondering, is there a way to tag several wripped
tracks with Winamp? It says in the tagger you can select the files and
choose to tag them, but I can't find how to do it. I am using Windows 7 and
Window-Eyes 7.5.3. Thank you.
To unsubscribe from this list, send a blank
both Speech and Yeti Microphone
if you are monitoring from a sound card other than the blue yetti you will
have latency. On Fri, 20 Jan 2012 20:25:14 -, Samuel Wilkins wrote:
Hi Bob, thank you. I managed to solve the problem just after I sent the
email, but now when I talk into the microphone
Hello everyone, I have a Yeti USB microphone, and it seems to work fine.
However, I would like to record both the microphone and what is coming
through the soundcard without telling the soundcard to have the microphone
as my default playback device. I can record one or the other by setting them
as
sounds thin. .
. .
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Friday, January 20, 2012 11:30 AM
Subject: Recording both Speech and Yeti Microphone
Hello everyone, I have a Yeti USB microphone
Hello everyone. I have just received a Yeti pro microphone for Christmas,
and I have been trying to use it. However, once I installed the drivers,
Window-Eyes started slowing down. Whenever it is plugged in, Window-Eyes
slows down and the only way to resolve the problem is to unplug the
Pro
go into your window eyes control pannel and make sure if you are using
dectalk access 32 or equlance that your sound card is set to your computers
sound card. try this and let us know what happens
- Original Message -
From: Samuel Wilkins clevercl...@gwilkins.co.uk
To: PC Audio
Hello everyone, how can I remove the ehaders of MP3 files so that when
playing them in a playlist there will be no gap between them? Thank you.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
, once
you get the initial file set up you can just use those parameters on
each one, or you can even do a batch run on the files with the
parameters you set. Make sense?
Dave C. Bahr
On 12/7/2011 8:59 AM, Samuel Wilkins wrote:
Hello everyone, how can I remove the ehaders of MP3 files
Some sound cards call what you hear Stereo Mix.
-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of dj jaan ali
Sent: 26 November 2011 13:31
To: PC Audio Discussion List
Subject: Re: recording what you here in windows 7?
I don't
Hello everyone. I would like to change some settings in the Edirol R09HR
recorder. Can someone please tell me how to use the menu, so I can go
through it with a fully sighted person? Thank you.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
Hello everyone, I am using Goldwave 5.58. In some folders, in the open
dialog, it displays the items backwards, so the file which has the last
letter in the alphabet is at the top. How can I get it to stop doing this?
It only does this with certain folders. Thank you.
To unsubscribe from this
1 - 100 of 345 matches
Mail list logo