We are sending email now,
But we are back to the original problem,
No hyperlink!
$email = $_REQUEST['email'] ;
$fromaddress .= '[EMAIL PROTECTED]';
$fromname .= 'Zone of success Club';
$eol=\r\n;
$headers .= From: .$fromname..$fromaddress..$eol;
$headers .= Reply-To:
Still parsing as text and not html!
You should be able to do this in both PHPmailer and Example 1127. Sending HTML
email before I finish reading the 60 emails I have remaining to catch up on
this list. Including any download.
_
Next time Brad, please try to take a look yourself at the line the error
indicates (and the lines around it aswell) and TRY to figure out what
MIGHT be wrong.
- Tul
If it's not on the line it reported, it may be immediately above that line.
The only unhelpful error I've seen (once you
I think file_exists returns false for remote files ;)
Even if it did (it doesn't:
http://uk3.php.net/manual/en/wrappers.ftp.php), I'd still rather not let
someone steal my /etc/passwd or /etc/shadow etc. files.
As I said before. Some form of regexp or similar restriction is 100%
Date: Thu, 15 Nov 2007 13:16:46 +
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: php-general@lists.php.net
Subject: Re: [PHP] file_exists
Instruct ICC wrote:
Date: Thu, 15 Nov 2007 00:20:52 +
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: php-general
No, you've missed the point. $expecteddir is a fixed variable that you,
the script author, specify. It does not contain anything coming from
external veriables. You then compare the full path you build from the
external variables to $expecteddir to verify that the file is in the
My server is down right now so I can't do my usual example script.
A likely story.
Just kidding.
Stut, YOU WERE RIGHT, AND I WAS WRONG.
Your code is golden.
_
Help yourself to FREE treats served up daily at the Messenger Café.
Something like the following would be much better (untested)...
$page = realpath(dirname(__FILE__).'/inc/'.$_GET['page'].'.php');
$expecteddir = realpath(dirname(__FILE__).'/inc');
if (substr($page, 0, strlen($expecteddir)) != $expecteddir)
{
// Ideally return a 403 status here
No access to the server command line to install it!
And, I am into this guy too deep to switch technologies. For the next time
around, no problem, this time I am just trying to get php to do what it is
supposed to do.
[sarcastic]Rough install.[/sarcastic] If you can write a php script, you
Date: Thu, 15 Nov 2007 10:17:29 -0500
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [PHP] Is there a 'Beginner's' PHP List
CC: php-general@lists.php.net
On Nov 14, 2007 10:29 PM, Instruct ICC [EMAIL PROTECTED] wrote:
I'm going to have to move this to gmail to keep
Date: Wed, 14 Nov 2007 09:39:19 -0800
From: [EMAIL PROTECTED]
To: php-general@lists.php.net
Subject: [PHP] Newbie question - current date - time
Hi Folks,
Newbie question :
- how do I get and display the current date?
- how do I get and display the current time?
I see the getdate
Date: Wed, 14 Nov 2007 13:20:16 -0800
From: [EMAIL PROTECTED]
To: php-general@lists.php.net
Subject: [PHP] Is there a 'Beginner's' PHP List
Come to think of it - if there is a more basic 'newbie' forum list (for PHP
beginners like myself) that anyone knows of (I found a few listed
Date: Thu, 15 Nov 2007 00:20:52 +
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: php-general@lists.php.net
Subject: Re: [PHP] file_exists
Philip Thompson wrote:
I've run into similar problems where I *thought* I was looking in the
correct location... but I wasn't. Take this for
My php program is working with Firefox, but not with Internet Explorer.
Nothing to do with php, your problem is javascript.
Is there a tool to find the problem?
For IE, try
I am using this function enhanced_list_box. This works
fine. Except the return value is None. How is it possible for it to
return a proper value. It reads a list from a data base.
while $row is valid you do stuff.
then when $row is invalid, you return it.
But maybe you knew that.
To
Ubuntu = Debian + New Life
Mandriva has Eclipse and PHPEclipse 'out of the box' along with Apache
and PHP
I can build a fully functional development machine from a pile of bits
in under an hour ;)
And currently that includes downloading the latest updates :)
+1 for Mandriva
The person doing this seems to be relatively new to the scene,
only defacing websites with common vulnerabilities that you can find
anywhere on the Internet (http://astalavista.box.sk/ for example).
Check out Zone-H (http://www.zone-h.net/) to see if your domains are
on there, and
But I highly doubt you'll find a first-class PHP code IDE (Zend Studio) that
is also a first-class HTML layout tool (Dreamweaver).
My 2006 rant said I'll accept multiple tools. I'll have to find that post and
see if my needs have changed. Ahh here:
I am looking for a tool (or tools) that
Just wondering if anyone uses an IDE and if so what ones?
Ta,
H.
Quanta +, of course.
Other is to much work and not worth the effort...
I really cannot see what so many of you guys see in eclipse, it's a
mistake all together
I use JOE of course.
On Thu, 2007-11-08 at 21:47 +0100, Børge Holen wrote:
On Thursday 08 November 2007 11:02:07 Hulf wrote:
Just wondering if anyone uses an IDE and if so what ones?
Ta,
H.
Quanta +, of course.
Other is to much work and not worth the effort...
I really cannot see what so
I'm going.
From: [EMAIL PROTECTED] To:
php-general@lists.php.net Date: Fri, 9 Nov 2007 00:28:59 +0100 Subject: Re:
[PHP] PHP ide? On Friday 09 November 2007 00:03:32 Instruct ICC wrote:
Just wondering if anyone uses an IDE and if so what ones?
Ta, H
2007 00:47:56 you wrote: On Fri,
2007-11-09 at 00:28 +0100, Børge Holen wrote: On Friday 09 November 2007
00:03:32 Instruct ICC wrote: Just wondering if anyone uses an IDE and
if so what ones? Ta, H.
Quanta +, of course. Other is to much work and not worth the
effort... I really cannot see what
Blah blah blah...electricity
You see where I'm going.
You forgot Adam and Eve
For those who believe You see where I'm going.
For the others, you get vacuum fluctuations LOL.
_
Boo! Scare away worms, viruses and so much more! Try
Thanks for the comment. I removed the trailing semi-colon in the two
areas where it was being sent to mysql_query() and tried the code again.
I'm still getting the same basic problem -- it silently aborts somewhere
around 22,000 to 26,000 records being processed out of just under 30,000.
I'm now wondering if some error is occurring that, for some reason, is
silently ending the routine. I'm building what may be a very long SQL INSERT
statement for each line in the CSV file that I'm reading; could I be hitting
some upper limit for the length of the SQL code? I'd think
Sounds much like what I'm trying to do. I have had to give up, for the
time being, on using PHP to upload the datafile; it's about 56 MB in size
and nothing I do seems to let me upload anything larger than a 2MB file. :(
I don't know if it's been mentioned in this thread, but 2M is a default
Greetings everyone, I was wondering where I could find information on the
status and possibilities of threads being included in PHP. Or if you are
knowledge-able on the status of threads, if it is a planned addition or
not
and the reasons as such. I understand PHP is not thread safe,
Greetings everyone, I was wondering where I could find information on the
status and possibilities of threads being included in PHP. Or if you are
knowledge-able on the status of threads, if it is a planned addition or not
and the reasons as such. I understand PHP is not thread safe, that the
Alberto García Gómez wrote:
I trying to include some image generate for a function that use GD.
eg.:
function myfunct(){
[MY_CODE]
}
but when I call the function it generate me a lot of symbols, letters and
numbers but no image.
WHAT CAN I DO?
PS.: I
Maybe something to do with the last line (but I get several lines)
Return Values
Returns the last line of the command output on success, and FALSE on failure.
I have within a web page:
$a=system('/usr/bin/lynx -dump http://api.hostip.info/country.php?ip='.$aa);
?
.
later I
Well on Mac/Unix/Linux you could type ps at the terminal to see the path to
the running processes or which php to see which one you would invoke.
Maybe you can upgrade to a Mac?
Parallels running Windows XP didn't show me such info in the Task Manager;
sorry.
Date: Thu, 25 Oct 2007
Use double quotes to get the value of $a or else you get the literal string
$a.
$aa=system(lynx -dump http://api.hostip.info/country.php?ip=$a,$location);
or
$aa=system('lynx -dump http://api.hostip.info/country.php?ip='.$a,$location);
Thanks! 1st solution did not work for me, but the
What the hell is this?
Is Charlie Schulz trying to get me to click on this link?
Date: Fri, 26 Oct 2007 15:08:10 -0400
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Ticket #29] [PHP] Executing PHP
Your ticket has been submitted. Please reply to this email (keeping the
subject
Well on Mac/Unix/Linux you could type ps at the terminal to see the path
to the running processes or which php to see which one you would invoke.
Maybe you can upgrade to a Mac?
Parallels running Windows XP didn't show me such info in the Task Manager;
sorry.
Oh I wish! I am
in my php.ini, I have this set
sendmail_from = [EMAIL PROTECTED]
The first thing I'd do is verify if the script is really using the php.ini you
think it is by having the script output phpinfo.
_
Peek-a-boo FREE Tricks Treats
I want to be able to display something like an image of a turkey
during the month of november from now until I'm dead.
And how will the application know when you are dead?
Well, I code all of my applications to receive RFID signals, and I
had a RFID transmitter embedded into me that
From: [EMAIL PROTECTED]
To: php-general@lists.php.net
Date: Wed, 24 Oct 2007 15:27:28 -0400
Subject: [PHP] help with code not wrking
Hi all,
I have inherited a problem script from a client, and it's a simple upload
function.
The problem is that while the image is being
I want to be able to display something like an image of a turkey
during the month of november from now until I'm dead.
And how will the application know when you are dead?
_
Windows Live Hotmail and Microsoft Office Outlook –
I want to be able to display something like an image of a turkey
during the month of november from now until I'm dead.
And how will the application know when you are dead?
When you stop paying for hosting, the application get's the idea when
it's bits go poof!
Yep, that will do
Date: Thu, 25 Oct 2007 09:43:14 +0800
From: [EMAIL PROTECTED]
To: php-general@lists.php.net
Subject: [PHP] system command
I tried:
$a=$_SERVER[REMOTE_ADDR];
echo pREMOTE_ADDR=$abr;
if($a=192.168.250.108) {
$a=61.64.101.101;
}
$aa=system('lynx -dump
Hello everyone.
We all know the difference between print and echo, but has someone ever
tried to combine them together ??
Right, try this :
?php
echo coucou . print('v ' . print('u ' . print('toctoc ') . 'hihi ') ) .
'tata ' . print('zozo ' . print('pupu '));
And guess the
I think I found a solution.
Here's the url:
http://www.webbytedd.com/bbb/image-test1/
The point is that the image is only accessible via this script, is
this correct?
I can access it without a script:
http://www.webbytedd.com/bbb/image-test1/images/a.jpg
I think what
I want to prohibit an image from being shown to anyone who is not
permitted (i.e., logged in).
The way I want to do this is to:
1. Set [file] permissions...
What if 2 or more users access the application at the same time?
Set the permissions so
but in the img tag, try src=display_image.php?id=anId
and in display_image.php, test if the user is authorized before displaying
the image.
Then a direct call to display_image.php?id=anId would still have a chance to
authenticate the user.
Forgot to reiterate:
Keep the images where only
Hi gang:
I think I found a solution.
Here's the url:
http://www.webbytedd.com/bbb/image-test1/
The point is that the image is only accessible via this script, is
this correct?
I can access it without a script:
http://www.webbytedd.com/bbb/image-test1/images/a.jpg
It may be
When I run the command on the server itself, it
works just fine. When I run the same command via a webpage, the text file
does not generate.
I also have a similar problem but reversed. It works in a webpage but not
on the command line.
mysql_connect, mssql_connect, and a
I want to prohibit an image from being shown to anyone who is not
permitted (i.e., logged in).
The way I want to do this is to:
1. Set [file] permissions...
What if 2 or more users access the application at the same time?
Set the permissions so only the PHP application can access it.
Hi. I'm wanting to run an executable that generates a text file, and I'm
having some issues. When I run the command on the server itself, it works
just fine. When I run the same command via a webpage, the text file does not
generate. My first impression was that the permissions were wrong.
When I run the command on the server itself, it
works just fine. When I run the same command via a webpage, the text file
does not generate.
I also have a similar problem but reversed. It works in a webpage but not on
the command line.
mysql_connect, mssql_connect, and a non-db function.
A
Yes, but precision is not the issue.
It doesn't make any difference if you are rounding.
You still have to make a decision
Uuhm, what was $t on the platform before the round please (the +=
.000..1 post)? Then that will confirm that precision is not the
problem.
Also,
Yes, but precision is not the issue.
php -r '$t=123.45; echo $t . \n; $t+=0.001; echo $t . \n;'
123.45
123.451
php -r '$t=123.45; echo $t . \n; $t+=0.0001; echo $t . \n;'
123.45
123.45
php -r '$t=123.45678901234567; echo $t . \n;'
123.45678901235
Geee garbage in,
well,
seems to be OS dependent:
PHP_OS:Linux (Suse 9.x 32bit) | PHP_VERSION:5.0.3
$t=1.255;
round($t,2):1.26
$t += .0001;
round($t,2):1.26
PHP_OS:WINNT (2000) | PHP_VERSION:5.2.4
$t=1.255;
round($t,2):1.25
$t += .0001;
round($t,2):1.26
--
View this message in
If the OP wants any single valid set, then this seems to work.
If he wants all valid sets, no joy.
I added a 10.00 and a 0.22 to the $values array and varied the position of the
10.00 (before and after 3.76) and it seems to pull the first set where the
first member in the $values array is a
While we're entertaining algorithms, has anyone else noticed that
php's round() isn't the most accurate algorithm to round?
For those that replied that there is a problem, can you provide examples?
precision
The optional number of decimal digits to round to, defaults to 0
Date: Tue, 9 Oct 2007 14:01:30 -0500
From: [EMAIL PROTECTED]
To: php-general@lists.php.net
Subject: [PHP] Looking for help with a complex algorithm
Good afternoon gurus and guru-ettes!
I am searching for an algorithm that will take a list of monetary values
and determine which of these
I never heard of the knapsack problem before this post.
But the w in the w*x terms appear to be 1, and he seems to want an exact value,
not less than or equal to.
I think my brute force factorial technique is a solution, but dynamic
programming may be more efficient? Not familiar with DP
CC: php-general@lists.php.net
From: [EMAIL PROTECTED]
Date: Tue, 9 Oct 2007 15:58:22 -0400
To: [EMAIL PROTECTED]
Subject: Re: [PHP] Looking for help with a complex algorithm
And that is when I realize how much more I still need to learn about
php...
IMHO, I don't think this has anything
But if the socket connection gets broken it creates an error msg
Warning: socket_write(): unable to write to socket [32]: Broken pipe in
Warning: socket_write(): unable to write to socket [32]: Broken pipe in
Warning: socket_write(): unable to write to socket [32]: Broken pipe in
That
Remove the @ and see if you get any useful message.
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: php-general@lists.php.net
Date: Mon, 8 Oct 2007 19:04:45 +0100
Subject: Re: [PHP] Socket how to die if connection broken
Hi Stut Ive tried your example but still cant get it to work.
if connection broken
Hi I got this error
Warning: socket_write() expects parameter 1 to be resource, null given in
/path/script.php on line 34
Thanks
- Original Message -
From: Instruct ICC [EMAIL PROTECTED]
To: php-general@lists.php.net
Sent: Monday, October 08, 2007 7:43
I dont get that error
Warning: socket_write() expects parameter 1 to be resource, null given in
/path/script.php on line 34
but just the original error msg
Warning: socket_write(): unable to write to socket [32]: Broken pipe in
Multiple times still?
Or just the one time?
Use
its mysterious statements like this that make code fragile,
imho. i prefer the modulus approach.
I would have agreed before reading the clarification. Not so sure
now...
At the risk of semantic nitpicking, and only because I find this
discussion stimulating (pity us poor geeks), I
Brian Dunning wrote:
I'm running the following code:
$query3 = DELETE FROM table1 WHERE referer=$referer ORDER BY creation
LIMIT $numtodelete;
$result3 = mysql_query($query3);
$string = $total found, $n kept, $numtodelete extras removed ($query3);
$x = mysql_query(insert into
From: [EMAIL PROTECTED]
Today's post was
prompted by my desire to prototype yet another suite of
browse-read-edit-add-delete functions for someone.
I was just going to ask you what is BREAD. Cool, basically a Web-based CRUD?
I can't find anything on it, can you point me to some sites?
Just for grins, tell us the steps you took to unsubscribe.
There is a link at the bottom of every email inviting you to unsubscribe. So
I'm sure you began there.
Tell us where it failed.
_
Kick back and relax with hot games and
In the
_
More photos; more messages; more whatever – Get MORE with Windows Live™
Hotmail®. NOW with 5GB storage.
http://imagine-windowslive.com/hotmail/?locale=en-usocid=TXT_TAGHM_migration_HM_mini_5G_0907
--
PHP General Mailing
Wow this formatted badly. (new hotmail on Safari -- MS made FF not even render
well)
Anyway, are you sure you are reaching the code you want to reach?
Perhaps !== is overkill and maybe even wrong when you should use ==.
Same with the other === usage?
Try some
echo HERE1\n;
echo HERE2\n;
to
In the To: php-general@lists.php.net Date: Thu, 20 Sep 2007 14:45:36 -0500
From: [EMAIL PROTECTED] Subject: [PHP] MAX_FILE_SIZE not working with file
uploads The punchline question is: What am I missing? Now for the
details. I have a form through which a user uploads image files. In the
Instruct ICC schrieb:
I was going to mention
http://php.he.net/manual/en/features.safe-mode.functions.php and ask
you if you need any of those functions, but I prefer Nathan's answer.
You may be able to set the error reporting in conjunction with
disable_functions and be done
From: [EMAIL PROTECTED]
Actually in this example, there is an error handling function provided
in the comments.
I'm commenting again because I want to stress the distinctions between errors
E_ERROR, warnings E_WARNING, *USER* and other messages/notices/etc.:
On 9/12/07, Samuel Vogel [EMAIL PROTECTED] wrote:
Hey guys,
Actually I'm still looking for a way to block for example the exec()
function without throwing an error!
From: Nathan Nobbe [EMAIL PROTECTED]
i dont know why you wouldnt just use the
disable_functions directive in php.ini
From: Jason Pruim [EMAIL PROTECTED]
Here is the relevant code (I think...)
$search = $_GET[search];
$self = $_SERVER['PHP_SELF'];
$qstring = SELECT * FROM current WHERE FName like '%$qstring%' or LName
like '%$qstring%' or Add1 like '%$qstring%' or Add2 like '% $qstring%' or
City like
It was able to call up external includes using the below code which
resulted
that the server was used to send out spam.
How can I protect the code?
Is ../inc/ in the web path? $_SERVER['DOCUMENT_ROOT']
If so, then what do you mean by external includes? You need to move inc/
to a path
From: Wagner Garcia Campagner [EMAIL PROTECTED]
Hello,
I'm building a web page just like a blog...
Where the user input some information... (name, website and comment)
This information is stored in a file...
And then the page displays it...
When the user access the page the first time, the
From: Wagner Garcia Campagner [EMAIL PROTECTED]
Is there a way to tell PHP to reload the page after the user submit the
information, so the page is always updated??
Thanks in advance,
Wagner.
I don't get your fundamental problem. When a user submits a form, the page
handling the submission
From: Afan Pasalic [EMAIL PROTECTED]
rough code, to give you an idea:
?php
if (isset($_POST))
{
# after validation
$first = $_POST['firs'];
$last = $_POST['last'];
mysql_query(
insert into table
(first, last)
values
From: Martin Marques [EMAIL PROTECTED]
Stut wrote:
Wagner Garcia Campagner wrote:
META HTTP-EQUIV='refresh' content='0;URL=index.php'
header('Location: index.php');
Although technically speaking that should be an absolute URL.
AFAIK, they are both equivalent.
Ahhh, if the OP meant, Load
Can server1 receive a web page form post from remoteAttacker,
identify it as spam (or a DoS or DDoS attack),
hand off the socket to multiple threads on multiple servers owned by
server1's owner,
return multiple responses to remoteAttacker which normally would have been a
single response
Not sure what you mean by hand off the socket to multiple threads on
multiple servers. I think you're talking about detecting that a POST is
spam and passing that off to another machine to handle it.
Yes, that is what I meant. A socket is a lower level object that the web
server is using to
Why don't you and others just reply to the list? (I'm smiling when I say
this.)
Wow, that's for that egg-sucking lesson. I would think it was clear from my
answer that I know what a socket is.
Sorry. You understood the concept but it wasn't clear to me that you
understood about the socket.
Because that means messing with the recipient list - that's donkey work
your client should do, hence my use of reply-to-all.
Wouldn't gmail thread it but still have 2 copies?
I could send email TO/CC/BCC the list to a specific folder, but I'd still
get the copy to me directly in another folder.
From: Hulf [EMAIL PROTECTED]
This does not work
echo $title=$row['title'];
echo trtdinput name=\title\ type=\text\ value=\$title\ //td;
Ta,
R.
I'll pull a Johnny Carson divining moment and say:
Did you need the first 'echo'? Does $title need to be set? Try:
$title=$row['title'];
You
?
Thank you kindly for any insight.
- sf
To the person who started this post and everyone answering it...
I would appreciate your thoughts on this post as well:
From : Instruct ICC [EMAIL PROTECTED]
Sent : Thursday, August 2, 2007 1:46 PM
To :php-general@lists.php.net
Subject
Finally I have the green light to get some separation of roles/duties.
First there was just me. Web Programmer, yet all web related hats.
Then there was the Server Administrator, and me, the Web Developer (sort
of like peers). Although the admin doesn't like to change the server
settings
From: Richard Lynch [EMAIL PROTECTED]
Your dev box should only match in software versions (okay, and any
really funky specialized hardware like a hardware random number
generator MAYBE).
Regarding duplicating the box versus software:
I'm working on a C++ project on a Mac Pro and a MacBook Pro.
From: Ken Tozier [EMAIL PROTECTED]
Hi
I think this is probably just a misunderstanding on my part, but I'm
creating associative arrays with string keys from MySQL query results and
when I put a value in the array, I get the expected key association along
with an index key that has a
From: Richard Lynch [EMAIL PROTECTED]
Your dev box should only match in software versions (okay, and any
really funky specialized hardware like a hardware random number
generator MAYBE).
Don't ask them for a Gigaplex Mu-on 16-cpu 64 Gig RAM 4 Terabyte hard
drive box.
Take an old box out of your
From: Richard Lynch [EMAIL PROTECTED]
On Fri, July 27, 2007 10:01 pm, Instruct ICC wrote:
If you mean get a dev box. You don't know how long I've been asking
for one
to match the production box.
Your dev box should only match in software versions (okay, and any
really funky specialized
Are there any magic functions like __sleep and __wakeup that get called
upon entry and exit of user functions or user object methods?
Something like
__hookEntry For User Functions
__hookExit For User Functions
__hookOoEntry For User Object Methods
__hookOoExit For User Object Methods
Basically
From: Richard Lynch [EMAIL PROTECTED]
But xdebug and apd are probably moot.
BTW, I'm not using separate development and production machines.
Right there is your first problem.
Solve that first.
If you mean get a dev box. You don't know how long I've been asking for one
to match the
From: Dan Shirah [EMAIL PROTECTED]
All,
I looked on PHP.net but I couldn't not find anything suitable to answer my
question.
Within PHP, is there a way to pull the name of the user that is currently
logged into the PC?
I know with some of the _SERVER functions you can pull the IP of the
From: Richard Lynch [EMAIL PROTECTED]
There's the display_error_in_browser or whatever it is that might be
causing the second output...
From the command line?
_
From: tedd [EMAIL PROTECTED]
Olav:
Mine too.
But, Rasmus gave me this:
$action = isset($_GET['action']) ? $_GET['action'] : null;
Which could be translated to:
$language = isset ($_SERVER[HTTP_ACCEPT_LANGUAGE]) ?
($_SERVER[HTTP_ACCEPT_LANGUAGE]) : *;
I think that might help.
Anyone see
From: Olav Mørkrid [EMAIL PROTECTED]
sorry. still get it twice.
c:\php -r error_reporting(E_ALL ^ E_NOTICE);
trigger_error(\hello\, E_USER_ERROR);
PHP Fatal error: hello in Command line code on line 1
Fatal error: hello in Command line code on line 1
- if i do error_reporting(0) then i get NO
From: Instruct ICC [EMAIL PROTECTED]
From: Olav Mørkrid [EMAIL PROTECTED]
sorry. still get it twice.
c:\php -r error_reporting(E_ALL ^ E_NOTICE);
trigger_error(\hello\, E_USER_ERROR);
PHP Fatal error: hello in Command line code on line 1
Fatal error: hello in Command line code on line 1
From: Tijnema [EMAIL PROTECTED]
I didn't read the full thread (because it is 80 emails...)
But really, it isn't special that these books are found on the net,
and you really can't stop them, nor can the author of the book.
With a quick search, I found these books related to PHP(all free to
He did say or Win XP.
I'll have to go back to find your original post to see if I can help.
Well, from your subject, maybe you can use a System Restore point?
---
If you need a stable, secure OS, get Ubuntu.
If you need a stable, secure OS, and need new hardware, get a
From: Stephan G [EMAIL PROTECTED]
php-5.2.3-win32-installer.msi
It has the following md5 sum, taken locally on my system:
4d042f649d9c264477e1b421c64c6435
I can confirm the same md5 sum.
The installer has encountered an unexpected error
installing this package. This may
First Hitler and the Nazis[1] reference. You lose! Thanks for playing.
:-)
[1] http://en.wikipedia.org/wiki/Godwin's_Law
Dang I didn't know that existed, thanks for the reference now I have
something for all my other discussions.
ROFLMAO
From: Chris [EMAIL PROTECTED]
That has to be your code re-setting the session variables or something. PHP
won't do this automatically for you.
Well I suppose it's or something. Try this code. Name it test.php:
?php
//session_start();
$notice = ;
if($_SERVER['REQUEST_METHOD'] == POST){
1 - 100 of 104 matches
Mail list logo