On 01:14 PM 5/03/2004, Dennis Saputelli said:
there is one more point that may need clarification and which
may be at the root of the original post
the 'default' setting applied in Tool Prefs Defaults
ONLY applies when using the Place Via command
if instead you are manually routing a board
and the
At 04-03-04 17:44, you wrote:
hi Leo
i can't reproduce your problem, please see if i did it right
i set via default paramter to tent
Check.
i set a design rule to a big expansion to make it obvious
note: i used via specification in design rule to apply only
to the diameter and hole size of the
Hi Leo,
I just confirmed everything you described.
Auto placed vias follow the via solder mask expansion rule. The default
tenting attribute is ignored.
Manually placed vias have the default attributes including tenting.
Brock Russell
At 01:34 PM 04/03/04 +0100, Leo Potjewijd wrote:
At
At 05-03-04 03:14, Dennis Saputelli wrote:
see my earlier response on this
snip-snip
the 'default' setting applied in Tool Prefs Defaults ONLY applies when
using the Place Via command
As I understand now (thanks also to the wonderful explanation given by Abd
about an hour earlier)
if
-Original Message-
From: Dom Bragge [mailto:[EMAIL PROTECTED]
Sent: Friday, March 05, 2004 1:21 AM
To: Protel EDA forum
Subject: [PEDA] company schematic libraries
I just wish to ping you on how you setup your own company
schematic libraries. There seem to be so many ways to
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Friday, March 05, 2004 2:41 AM
To: Protel EDA Forum
Subject: Re: [PEDA] company schematic libraries
Snip
I call this the one-part, one-symbol system.
It sounds like work but it is not hard to manage - unless
At 08:40 PM 3/4/2004, Leo Potjewijd wrote:
All the vias that are placed during interactive routing (switching layers)
show the big expansion , all the vias that are placed with the Place Via
command are tented.
From all the discussion which has preceded, this is exactly expected
behavior. The
Hi members:
I want to generate a netlist for a project, then the Netlist
Creation dialog open, I find that there are some items that I don't
understand, please experts hlep me to indicate it.
The available opinion that I don't know include:
preference: