Thierry Godefroy schreef:
> Hello.
>
> New FileInfo II version released, on Wolfgang's request. Changelog:
>
Thank you.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hi,
Shouldn't DMEDIUM_RDONLY(/flp1_) return 1 if the floppy is
write-protected and 0 otherwise?
It seems to return 0 (not write-protected) in both cases.
A bug? Or am I missing something here?
François Van Emelen
___
QL-Users Mailing List
http://
Hi,
Shouldn't DMEDIUM_RDONLY(/flp1_) return 1 if the floppy is
write-protected and 0 otherwise?
It seems to return 0 (not write-protected) in both cases.
A bug? Or am I missing something here?
should be DMEDIUM_RDONLY(\flp1_) instead of DMEDIUM_RDONLY(/flp1_)
François Van E
Marcel Kilgus schreef:
> François Van Emelen wrote:
>> Shouldn't DMEDIUM_RDONLY(/flp1_) return 1 if the floppy is
>> write-protected and 0 otherwise?
>
> I can only speak for QPC, but there I just cannot detect the status of
> the write latch. The command usually j
Joachim Van der Auwera schreef:
>
> I believe this flag is only set after a (unsuccessfull) write operation.
>
> Joachim
>
Thank you.
Nice to know you're still on this list.
François Van Emelen
___
QL-Users Mailing List
http://w
ork for you, why not send your data to a file
with a combination of 'SPOOLON/SPOOLOFF', swap to Windows and
print that file using 'Word' or 'Writer',
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
> (MK: 3.36 has sedit's config routines 8-))
>
> Cheers...Ralf R.
>
> ___
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.htm
>
>
Never had any problems with it.
of the newer
> programming possibilities you would like covered. Then I can start twisting
> a few arms,
Still hoping someone will write a routine to print/display large
and very small numeric values in a readable way; I can read
'9,876,543,210.00' but not 9.87653954E9 :(
F
displayed.
rem not good enough for me.
rem if I'm wrong, please correct.
Rem that's not the amount of my bank account, unfortunatly :(
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
to replace the rather nasty 34E40 notation.
>
> I'm sure I have done this in the past, but never thought it worth while
> publishing it!
It would be worth while, I think.
François Van Emelen
> George
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Derek Stewart schreef:
> Simon Goodwin did something in the DIY Toolkit.
Couldn't find it.
>
> Or just write an assmbler routine to do 32 bit numbers.
My programming 'skills' are limited to Sbasic :(
François Van Emelen
> Derek
>
__
P Witte schreef:
> François Van Emelen writes:
>
> <>
>> Still hoping someone will write a routine to print/display large
>> and very small numeric values in a readable way; I can read
>> '9,876,543,210.00' but not 9.87653954E9 :(
>
> What
Claude Mourier 00 schreef:
> Try this instead :
> 130 euro = '16'
> 140 PRINT IDEC$(euro,11,2)
>
> And calculation is more accurate to.
>
Thanks,
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Marcel Kilgus schreef:
> François Van Emelen wrote:
>> They have to same limitations as 'print'; '9,876,543,210.00'
>> (floating point) can't be displayed correctly with them and that's
>> what I want to be available, a way to display t
Wolfgang Lenerz schreef:
> Hi all,
>
> Offhand, does somebody remember whether there is a basic keyword
> that returns the job ID of a named job
>
> (eg. result = job_id('my_job_name') )
>
> TIA!
>
> Wolfgang
Hi Wolfgang,
'Job_id' can be foun
nd send
> it to [EMAIL PROTECTED], I feel it would a lot of people some good -
> including me - I've already lost track of what the latest solution is - some
> form of patched version of Xchange I understand.
>
> Regards,
>
> John Gilpin.
> Quanta Treasurer.
ad the week starting on Sunday. Mind you
> that is not work week but Calendar Week.
>
> Cheers,
>
>
> Phoebus
Here in Belgium our calendar week starts on Monday and ends on
Sunday. Our work week also starts on Monday and ends on Saturday;
Saturda
ould use QD:
F3 (commands)
E ordEr lines
S start colum
Ascending/Descending
O Ok
and save your list to DOSx_.txt
If your list containts accented vowels the result will differ from
a sorting done with Excel.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
rd in one of our
most used utilities (FileInfo2).
My updated 'keywords list' have more than 3.500 entries now, but I
don't yhink it is still worth while publishing.
He is so right being picky about the way 'SMSQ is updated.
François Van Emelen
>
> Best Wishes,
>
> Geoff
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
P Witte schreef:
> François Van Emelen writes:
>
>> Lack or absence of comments?
>
> Its all my fault! However, there are mitigating circumstances. First of all
> I had written a much simplified version of the FEW, FET and FEX keywords,
> which Id used for years before I
uld try 'DBF2HTM' (Per Witte website) which converts Archive
DBF-files to HTLM tables.
Export your ABACUS file, import it in ARCHIVE and use DBF2HTM
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
(tables)
3)CSV (can be opened in CALC(OpenOffice) and probably Excell
4)Plain text (field separator TAB)
The file will be zipped to reduce its size.
What file name do you want for the 'zip' file?
Kind regards,
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Marcel Kilgus schreef:
> Due to circumstances not within my control it took a bit longer, but
> finally it is done! I've put the details on what's new and stuff on
> http://www.sinclairql.info/
>
> Cheerio, Marcel
Thank you
François Van Emelen
_
x27;
160 input#3,st$
165 print#0,st$,len(st$):
170 rem len(st$)=0 because there is no linefeed
175 rem in 'ram2_nolinefeed_txt'
180 pause
185 close#3
Kind regards,
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Wolfgang Lenerz schreef:
> On 2 Apr 2006 at 9:07, François Van Emelen wrote:
> (...)
>
>> Using 'input' can return unexpected results even without exceeding
>> the input buffer length.
>
> Hmmm, I wonder whether this is really so unexpected.
>
>
Hi Wolfgang(Lenerz),
It seems my reply to your request didn't reach you.
Could you tell me in what format the list should be (plain text,
DBS, HTML, CSV) ?
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
wdraw does not
> display anythings.
>
> Does exist a limit about the numer of array items that
> mawdraw can display ?
>
> Thanks for any help.
>
> Ciao
>
> Fabrizio
>
I'm also interested to know the answer to that question.
François Van Emelen
t mean that, obviosly fewer ! But curiously still a
> lesser number.
>
>
Would 'a smaller number' be correct here too?
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hi,
Can someone tell me when the next QL meeting in Eindhoven wiil take place?
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
racters (éçàâä) ... and most of my Quill docs are in French and
Dutch :(
It would be nice to have a QStripper that would do the same job for
Quill docs in PC format.
I'am sure QStripper will be success!
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
[EMAIL PROTECTED] schreef:
> Afternoon Earthlings,
>
> this lunchtime, I have changed QStripper to handle 'foreign' characters.
> Thanks to François Van Emelen for providing a test file (in French).
>
> The latest version is online at :
>
> http://www.bo
changed in the support_files (unless this is
> your first download of course !).
>
> Cheers,
> Norman.
>
> ___
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.htm
>
Hi Nor
/procedures to save and load sbasic arrays.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
3.12 and Qpc2 3.32
> 100 a$='ram1_x_txt'
> 110 print ftest(a$)
> 120 print ftest(a$(1 to len(a$)))
> 140 print ftest(a$(1 to ))
lines 110,120,140 return the same value -7
Could DIM the problem ?
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
e with
> present QL trends,
>
>
> Best wishes,
>
> Geoff
>
>
> ___
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.htm
>
Well done! Thanks.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Dilwyn Jones schreef:
> Does anyone have any experience of using MCALLT in Easyptr?
>
Hi Dilwyn,
You could download Per Witte's 'POP2.zip' from http://www.bixio60.org.
François Van Emelen
___
QL-Users Mailing List
http://
Dilwyn Jones schreef:
>> Dilwyn Jones schreef:
>>> Does anyone have any experience of using MCALLT in Easyptr?
>>>
>>
>> Hi Dilwyn,
>>
>> You could download Per Witte's 'POP2.zip' from
>> http://www.bixio60.org.
>> Fran
x27;s not listed in QHelp's index file. So
> why didn't I have this trouble on the black box? Where do I get
> DIR_SELECT$?
> ___
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.htm
>
Hi,
You have to load the
gt; 135 LOCal temp_lang
> 140 temp_lang=LANGUAGE
> 145 IF temp_lang<>1:LANG_USE 1:END IF
> 150 dte$=DATE$
> 155 temp_month$='JanFebMarAprMayJunJulAugSepOctNovDec':
> 160 mt$=dte$(6 TO 8)
> 165 r= mt$ INSTR temp_month$ :r=INT(r/3)+1
> 190 LANG_USE temp_lang
> 195 RETurn r
> 200 END DEFine month_number
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
this server.
>
> Ho hum!
>
> Wolfgang
>
> ___
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.htm
>
No problem here with 'http://www.firshman.co.uk/ql/photos.htm'
Thanks for the photos to both Tony and Urs!
François Van E
Dilwyn Jones schreef:
> Q-DIARY and ALARM
>
> I've just put two new freeware programs of mine onto my website.
>
Thank you!
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
well as the last one, hope
> everybody is happy with the result.
Of course we are!
Thanks to both of you for the new version.
>
> Marcel
>
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
e - A collection of useless screen savers. Updated
> CMP - Simple assembler and S*Basic tools to compare strings. New
>
> www.witteware.com/knoware
>
> Per
> ___
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.
s
>> POpup eXtend - Per Witte
>> QL2PC - Geoff Wicks ( full version ).
>
> Lucky you. Im still looking forward to mine..
>
> Per
Lucky me. I'm already using them for about a week!
Thanks for the interesting articles in QLToday V11 I 2.
François Van Emelen
___
Dilwyn Jones schreef:
> A happy new year to everyone on this list.
>
And from me.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Peter Fox schreef:
> Having tried to download the Euro converter twice, I have got stuck at
> the Yahoo Login stage. Any Ideas?
>
> Happy New Year to all,
>
> Peter Fox
>
Same here.
François Van Emelen
___
QL-Users Mailin
uld be?
>
I think the signal extension has to be installed before unzipping with
the 'unzip' version found on the QDT cd.
I had some problems with it and I had to modify 'qdtinst_bas too.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Roy wood schreef:
> In message <[EMAIL PROTECTED]>, François Van Emelen
> <[EMAIL PROTECTED]> writes
>> I think the signal extension has to be installed before unzipping with
>> the 'unzip' version found on the QDT cd.
>> I had some problem
Roy wood schreef:
> In message <[EMAIL PROTECTED]>, François Van Emelen
> <[EMAIL PROTECTED]> writes
>> Roy wood schreef:
>>> In message <[EMAIL PROTECTED]>, François Van Emelen
>>> <[EMAIL PROTECTED]> writes
>>>> I think the s
Hi all,
Have a fine and productive QL meeting tomorrow!
Health problems make it impossible for me to go to Eindhoven tomorrow :(
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Arnould schreef:
> Hello,
>
> Who foresees to go to Eindhoven on June 16?
>
> Arnould
I will go if health allows me to travel.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
ebsite at:
>
> http://www.dilwyn.uk6.net/arch/index.html
>
Hi Dilwyn,
I can't unzip the Zip manager with ACP and Winzip says it is not a valid
zip-file.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Dilwyn Jones schreef:
> Hi Dilwyn,
> I can't unzip the Zip manager with ACP and Winzip says it is not a
> valid
> zip-file.
> François Van Emelen
>
> My ISP has now managed to restore full functionality to the websites
> on the server they had problems with.
Hi,
Where can I find the syntax of 'SET_DEFAULT' ?
My version of 'menu_rext' is 7.66 and SET_DEFAULT is present in it but I
can't find any reference to it in my manual.
Any idea?
François Van Emelen
___
QL-Users Ma
of 64, 65, 66 return
> colour combinations for main window, sub-window and buttons, though I
> don't know if SET_DEFAULT can set these too.
>
Thanks for the info, Dilwyn.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
te icon (2)
> ; 97 delay for icon explanation (hint) (2)
> ;
> ; The maximum size for the string is given in brackets.
>
> Hope this helps,
>
> cheers Jochen
>
>
Thank you,
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Best wishes to all of you QLers out there.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
is a keyword found in ProWesS-Proforma (Joachim Vanderauwera PROGS)
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
> Bruce--!! Can you help?
>
Yes, there was one from you titled "[Ql-Users] Windows, Linux and QPC
and notebook" on 2008/01/08.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hi,
Please update your email address book if you want to contact me.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
o.uk/smsqe.htm
Hi,
Use Menuconfig or config to do that modification.
Select the 4th item (print) and replace PAR1 with PAR2...et voilà.
Hope this helps.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
config2.zip' from Dilwyn Jones'
website.
P.S. I'm not a native speaker
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Regards,
Peter Fox
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hi,
Use Menuconfig or config to do that modification.
Select the 4th item (print) and replace PAR1 with PAR2...et voilà.
Hope this helps.
François Van Emelen
Hi,
Sorry for the wrong info I sent you; I really though
I try it on my system.
The author is Jérôme Grimbert.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
ith 'QPC' under 'Vista' making it nearly
impossible to use QPC.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
s the same keyboard
problems here. It could be a hardware problem after all.
Is there someone out there using a combination of Vista and QPC with an
AZERTY keyboard ?
Thanks for your help, Norman.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
t for countries using another keyboard layout eg.
Belgium, Luxembourg and many other countries.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Dilwyn Jones schreef:
François Van Emelen wrote:
You're right, it is easy for
the USA(=1)
France(=33)
GB(=44)
Germany(=49)
Italy(=39)
but not for countries using another keyboard layout eg.
Belgium, Luxembourg and many other countries.
Hi François,
I don't know if this will help
ey are visiting Norway, Belgium, Germany, Thailand and Hong Kong.
So be warned all you QL-ers. I am still alive and I have a piece of
paper to prove it.
I can confirm this; I saw him last Saturday at the QL meeting in
Eindhoven...or was it a look-a-like ? ;-)
François Van Emelen
Now t
Hi,
Merry X-Mas and all the best for 2009,
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
udience as possible, but didn't have enough space on my website to make
it all available in its entirety:
Thank you Dilwyn, Javier and all those who made this available.
Is the content of the "QL Documentation CD" the same as on the one I
bought a few years a
Dilwyn Jones schreef:
Thank you Dilwyn, Javier and all those who made this available.
Is the content of the "QL Documentation CD" the same as on the one I
bought a few years ago?
François Van Emelen
Unlikely. I think the version Javier has uploaded is 1.91.
The versions lis
o put your software on his website?
Hope your decision isn't final and thanks for all you have done for the QL.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
.
François Van Emelen
I have downloaded all his programs, just in case.
Most of them are on my website already, I just need to check they're up to
date.
Hi Dilwyn,
Two days I noticed that Geoff's website was still accessible and I
downloaded the files.
Thanks for your help.
SMSQ schreef:
Hi everybody,
just wanted to announce that J-M-S was founded 25 years ago
(2nd of May 1984) and has survived for 25 years now!!
All the best, Jochen
Congratulations!
François Van Emelen
___
QL-Users Mailing List
http://www.q-v
items,application windows, application objects.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
SMSQ schreef:
... has been printed and packed and will be shipped today!!!
Best regards Jochen
Thanks Jochen.
I haven't heard of Sjef since my last E-mail to him (3 months ago), so I
suppose QL meetings in Eindhoven are a thing of the past.
Have a nice day,
François Van E
.
Doug LaVerne 37830 USA
That is sad news.
My Condoleances to You and Your Family.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
SMSQ schreef:
Thank you very much :-)
Nothing mystic here, but we don't advertise this either :-D
We thought after 10 years, we should know what we want ...
so we got married.
Cheers Jochen
Congratulations to both of you!
François Van E
riable 0 will be returned
if you type (command line)
close#3 Invalid Channel ID will be returned
After LRUN ram1_trythis_bas
print a_variable will return 10
close#3 will close#3
So if you want to preserve the 'environment' LRUN should be used.
Hope this helps
Regards,
François Van Emele
rd takes an optional parameter (long int)
that is passed to the calling job.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
a scrren size of 1680x945 (vista). I don't know
about Shift/CTRL/F12 as I have never used it.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
ys show all the available keywords. A bug or a feature?
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Marcel Kilgus schreef:
François Van Emelen wrote:
Of course this is only true for extensions/toolkits loaded in Job 0.
Yes, forgot to say that.
Extensions/toolkits loaded in another Job are only available in that job.
'EXTRAS' doesn't always show all the available keywo
P Witte schreef:
Marcel Kilgus wrote:
François Van Emelen wrote:
Of course this is only true for extensions/toolkits loaded in Job 0.
Yes, forgot to say that.
Extensions/toolkits loaded in another Job are only available in that
job.
'EXTRAS' doesn't always show all the ava
respectively).
If you want to create your own calendars, several QL calendar-making
programs are available to download from the Utilities page on my website
at http://www.dilwyn.me.uk/utils/index.html
Dilwyn Jones
Thank you.
François Van Emelen
___
QL
Merry Christmas and Happy New Year to all of you!
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Xmas?
Jochen
Nothing has arrived in Belgium.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hi Jochen,
Still no sign of QL Today here in Leuven (Belgium).
Kind regards,
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hi
QLtoday arrived half an hour ago.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
nt by
SAVE string DATA array name()
You could try the 'VLS' extension by Per Witte.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Malcolm Cadman schreef:
Hi,
I have just received the following email, does anyone know what this is
about ?
I assume that it is photos of the QL Is 25 Event, recently organised.
Hi,
I received it this morning but as I don't know sent it I deleted it.
François Van E
difficult to apply
anyway. It could be slightly redefined to make more sense, but does
anybody *really* need it?
Marcel
Isn't that the reason why 'RPXL% (Easyptr) doesn't work correctly?
François Van Emelen
___
QL-Users Mailing List
Tobias Fröschle schreef:
Am 22.02.2010 11:55, schrieb Tony Firshman:
Tony Firshman wrote, On 22/02/10 09:10:
For .doc, last time I added a special character at the end of every
paragraph. I then made a printer driver as follows and printed to a
file:
End of line -> SPACE
"Special character
Dr. M.Hanias schreef:
Is there any link from which can download the PCFOUR for PC?
Michael
I bought mine more than 20 years ago. I don't know the current status of
PCFOUR.
François Van Emelen
___
QL-Users Mailing List
http://ww
Tony Firshman schreef:
However the QL 'archive/abacus' export only outputs data if the first
column cell is non blank.
This looks like a bug to me. Is it cured in any versions of Xchange -
mine is 3.90J?
I think most recent version is V3.90L.
François
nhardt, sold by Jochen. I do not know the actual
state as there is nothing to find about it on Jochen's site.
Ralf
Current version of Qspread is 4.04
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Ralf Reköndt schreef:
François Van Emelen wrote:
This looks like a bug to me. Is it cured in any versions of Xchange -
mine is 3.90J?
I think most recent version is V3.90L.
It is "N": http://www.kilgus.net/smsqe/xchange.html
Ralf
You 're right, it is V3.90N.
Thanks Ral
ecimal comma, I tried to set the language for the cells but after
loading the DIF it was reset to "standard".
Or maybe O.O. is interpreting the Xchange output wrong.
Has anyone tried this before?
Bob
Same problem here with OpenOffice v 3.2.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
olume 14 Issue 3.
François Van Emelen
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
1 - 100 of 353 matches
Mail list logo